using s condition for the execution of a java script with dynamic action

Similar Questions

• The execution of an external task with dynamic parameters

  The current scenario is that a job is running a process that will return an XML of records and their corresponding scores after going through a few search rules. Finally, these files will be returned to Siebel, but until this is done, we would like to run a XSL Transformation on them. We have developed an external executable that takes input and the output XML target files as arguments and applies the transformation.

  Logically speaking, Disqualification will have to write to an XML file, call the external task (pointing to the correct XML file as it may be several simultaneous research generating XMLs), wait for the task to complete, read the XML data, and then pass this information through the web service.

  As mentioned above, the biggest problem here would be the potential of many users at the same time research. Therefore, a Shared output THAT XML is not a workable solution.

  How dynamic arguments can be passed in writing to an XML file and the execution of an external task?

  It depends on.

  In general, we use attributes of the entry on the message to change the behavior of a service in real time. The match of entry score threshold is an example of this - the process uses this attribute do not return the results below. Similarly, we use attributes in the address for service of cleaning that control whether to change the address of entry. Your customer may have a logic that defines the entry attribute values - in the case of Siebel, the threshold value is a good example of what it can be configured in Siebel and defined by the connector for Siebel Disqualification.

  Then there are options outsourced in a process of the Disqualification. These can vary for different works the same task using a profile or command-line... run the limitation of which is that the evolution of the option for a given service means stopping and restarting, but it allows things such as the same configuration to have different behaviors on different series, or by operating on different machines.

  I recommend you to read about outsourcing in the online help. Most of the settings configuration of the Disqualification can be outsourced and substituted at execution - a powerful feature that can and has been used to solve a variety of problems.

  Kind regards

  Mike

• Using AJAX code for the conditional selection list.

  Hello
  
  I use AJAX code for the first time, I have no knowledge in java, I got the code from this forum and try to manipulate my requirement.
  
  My requirement is that I have two selection lists, host_name) 1 and 2) database_name.
  As soon as I pick/choose the value of host_name select list, I need to fill in only the databases on this particular host. I don't want to send the page for this action.
  
  Here is the code, thank you if anyone can help.
  
  
  On request the code application process:
  -----------------------------------------------------
  declare
  number of l_counter;
  l_o_name varchar2 (2000);
  Start
  owa_util.mime_header ("text/xml", FALSE ");
  HTP.p ('Cache-Control: non-cache');
  HTP.p ('Pragma: non-cache');
  owa_util.http_header_close;
  HTP. PRN ("< select > '");
  for rec in (select "ORA_DATABASES_VW". "' Database_name ' as 'database_name ',.
  'ORA_DATABASES_VW '. "" DB_ID "as"DB_ID ".
  of 'ORA_DATABASES_VW '.
  where 'ORA_DATABASES_VW '. ("' HOST_NAME ' =: TEMP_ITEM)
  loop
  HTP. PRN ("< option value ="' | rec.db_id |) '">' || Rec.database_name | ("< / option >");
  end loop;
  HTP. PRN ("</select > '");
  end;
  
  Header HTML on this page:
  =================
  < script language = "JavaScript1.1" type = "text/javascript" >
  
  function get_List_XML (source_item, target_item) {}
  
  var v_Target = html_GetElement (target_item);
  var v_Source = html_GetElement (source_item);
  var ajaxResult = new htmldb_Get (null, & APP_ID, 'APPLICATION_PROCESS = POPULATE_LIST_XML', 0);
  ajaxResult.add ('TEMP_ITEM', source_item.value);
  var v_result_xml = ajaxResult.get ('XML');
  
  If (v_result_xml & & v_Target)
  {
  var options_Contents = v_result_xml.getElementsByTagName ("option");
  v_Count = options_Contents.length;
  v_Target.length = 0;
  
  for (var i = 0; i < v_Count; i ++)
  {
  var v_opt_xml = v_result_xml.getElementsByTagName ("option");
  appendToSelect (v_Target, v_opt_xml.getAttribute ('value'), v_opt_xml.firstChild.nodeValue)
  }
  }
  
  }
  function appendToSelect (target_item, option_val, option_content) {}
  var v_Opt = document.createElement ("option");
  v_Opt.option_value = option_val;
  {if (document. All)}
  target_item.options.Add (v_Opt);
  v_Opt.innerText = option_content;
  } else {}
  v_Opt.appendChild (document.createTextNode (option_content));
  target_item. AppendChild (v_Opt);
  }
  }
  < /script >
  
  
  Attribute of the form in the host_name column element. P935_INSTANCE_DB_NAME is my page for database_name.
  OnChange = "get_List_XML (this,"P935_INSTANCE_DB_NAME").

  Feel free to mark the answers useful or correct ;)

• With the help of case condition for the date of distinct values is does not

  Hello PL/SQL gurus and experts.
  
  I use Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64-bit Production version
  I followed two tables
  
  TT3-

  create table TT3(FeesCntlr,CommCntlr,LatePayCntlr,Name,Age) as select
  1,11,21,'Mike',25 from dual union all select
  2,12,22,'Clark',26 from dual union all select
  4,17,27,'Ussan',28 from dual union all select
  5,13,21,'Linda',29 from dual union all select
  6,14,24,'Obrek',35 from dual union all select
  7,15,25,'Batty',45 from dual union all select
  8,16,26,'Nicky',38 from dual;

  TT4

  drop table TT4;
  create table TT4(TRNID,BlockID,FeesCntlr,CommCntlr,LatePayCntlr,BookDate) as select
  221,625,1,11,21,20121101 from dual union all select
  223,625,2,12,22,20121101 from dual union all select
  224,625,1,11,21,20121101 from dual union all select
  225,627,4,17,27,20111001 from dual union all select
  226,628,5,13,21,20120701 from dual union all select
  227,628,6,14,24,20120701 from dual union all select
  334,628,7,15,25,20120701 from dual union all select
  339,629,8,16,26,20120701 from dual union all select
  393,629,1,11,21,20120701 from dual union all select
  432,629,2,12,22,20120701 from dual union all select
  347,629,1,11,21,20120701 from dual union all select
  556,629,4,17,27,20120701 from dual union all select
  558,629,5,13,21,20120701 from dual union all select
  974,629,6,14,24,20120701 from dual union all select
  976,629,7,15,25,20120701 from dual union all select
  980,629,8,16,26,20120701 from dual union all select
  1223,650,2,12,22,20110415 from dual union all select
  1224,650,1,11,21,20110415 from dual union all select
  1225,650,4,17,27,20110415 from dual union all select
  1226,650,5,13,21,20110415 from dual union all select
  1227,650,6,14,24,20110415 from dual union all select
  1334,650,7,15,25,20110415 from dual union all select
  1339,710,8,16,26,20120115 from dual union all select
  1393,710,1,11,21,20120115 from dual union all select
  1432,710,2,12,22,20120115 from dual union all select
  1347,710,1,11,21,20120115 from dual union all select
  1556,710,4,17,27,20120115 from dual union all select
  1558,711,5,13,21,20111231 from dual union all select
  1974,711,6,14,24,20111231 from dual union all select
  1976,711,7,15,25,20111231 from dual ;

  Now, if I use the following DML for the year 2012, then the result is as follows-
  

  SQL> select t3.Name,t3.age,count(t4.TRNID),count(distinct(BlockID)) from
    2  tt3 t3,tt4 t4
    3  WHERE     t3.feescntlr = t4.feescntlr
    4           AND t3.commcntlr = t4.commcntlr
    5           AND t3.latepaycntlr = t4.latepaycntlr
    6    AND t4.bookdate between 20120101 and 20121120
    7  GROUP BY t3.name, t3.age;
  
  NAME         AGE COUNT(T4.TRNID) COUNT(DISTINCT(BLOCKID))
  ----- ---------- --------------- ------------------------
  Mike          25              12                        3
  Mike          27              12                        3
  Batty         45               4                        2
  Clark         26               6                        3
  Linda         29               4                        2
  Nicky         38               6                        2
  Obrek         35               4                        2
  Ussan         28               4                        2
  
  8 rows selected.

  Now, if I use the following DML for 2011, then the result is as follows-
  

  SQL> select t3.Name,t3.age,count(t4.TRNID),count(distinct(BlockID)) from
    2  tt3 t3,tt4 t4
    3  WHERE     t3.feescntlr = t4.feescntlr
    4           AND t3.commcntlr = t4.commcntlr
    5           AND t3.latepaycntlr = t4.latepaycntlr
    6    AND t4.bookdate between 20110101 and 20111120
    7  GROUP BY t3.name, t3.age;
  
  NAME         AGE COUNT(T4.TRNID) COUNT(DISTINCT(BLOCKID))
  ----- ---------- --------------- ------------------------
  Mike          25               2                        1
  Mike          27               2                        1
  Batty         45               2                        1
  Clark         26               2                        1
  Linda         29               2                        1
  Obrek         35               2                        1
  Ussan         28               4                        2
  
  7 rows selected.

  But by using the condition if I use the following dml and results do not match-

  SQL> select Name,Age,sum(Trn),sum(CurYrOrdr) "2011 Order", sum(LastYrOrdr) "2012 Order"
    2  from
    3  (
    4  select t3.Name,t3.age,count(t4.TRNID) Trn,(case when t4.bookdate between 20110101 and 20111231 
  then count (distinct(BlockID)) else 0 end) CurYrOrdr,
    5  (case when t4.bookdate between 20120101 and 20121120 then count (distinct(BlockID)) else 0 end)
   LastYrOrdr
    6   from
    7  tt3 t3,tt4 t4
    8  WHERE     t3.feescntlr = t4.feescntlr
    9           AND t3.commcntlr = t4.commcntlr
   10           AND t3.latepaycntlr = t4.latepaycntlr
   11    AND t4.bookdate between 20110101 and 20121120
   12  GROUP BY t3.name, t3.age,t4.bookdate
   13  )
   14  group by Name,Age order by Name,Age;
  
  NAME         AGE   SUM(TRN) 2011 Order 2012 Order
  ----- ---------- ---------- ---------- ----------
  Batty         45          8          2          2
  Clark         26          8          1          3
  Linda         29          8          2          2
  Mike          25         14          1          3
  Mike          27         14          1          3
  Nicky         38          6          0          2
  Obrek         35          8          2          2
  Ussan         28          8          2          2
  
  8 rows selected.

  As the expected output, that I expect - is

  ----------------------------------
  
  Expected Output -
  NAME         AGE      "2012 TRNID"       "2011 TRNID"     "2012 ORDERID"     "2011 ORDERID"
  ----- ---------- --------------- ----------------------------- ---------- ------------
  Mike          25        12          2               3          1
  Mike          27        12              2          3          1
  Batty         45        4               2              2          1
  Clark         26        6               2              3          1
  Linda         29        4               2              2          1
  Nicky         38        6               2              2          1
  Obrek         35        4               2              2          1
  Ussan         28        4               4              2          2

  I sincerely thank each of you in advance for the input/comments that I fight with it for some time now.
  Kindly help.

  user555994 wrote:
  Hi JAC
  Thanks for the comments and certainly once I comment out the following line.
  - AND t4.bookdate between 20110101 and 20111120

  then the values are adapting, but at the same time why do we need to comment the date range condition as case is just a filter and not the condition.

  filter should be-

  AND t4.bookdate between 20110101 and 20121120 --"made it 12"
  

• Can I use my iPhone for the load

  Can I use my iPhone for the load?

  Yes

• TomTom map is wrong in vietnam, pls use google map for the ios update, thank you

  Map of Tomtom is very bad in vietnam, please use Google map for the ios update, thank you

  We are fellow users on these forums, not support nor Apple iTunes.

  TomTom are responsible for their own data to the card, if you have problems with their app and/or cards that you have tried to contact them?

• TreeSize Professional - using this tool for the first time - need help to run the report

  Using TreeSize Professional for the first time and I need search records to analyze documents containing invalid characters and path names that are too long.  We are moving the content in SharePoiint and SharePoint will not accept path names that are more than 250 characters and invalid characters.

  Does anyone know how to do this research?

  [Moved from the community centre of Participation]

  What is a TreeSize question or a question of SharePoint?

  Try SharePoint forums on the left side of

  https://social.technet.Microsoft.com/forums/en-us/home?category=SharePoint&filter=AllTypes&sort=lastpostdesc

  Don

• Use two assistants for the acquisition of data at the same time

  Hello

  I want to read multiple data channels of analog inputs on my DAQ hardware. However, when I try to create two separate data acquisition assistants for each entry, it gives an error saying "is reserved for the specified resource. The operation could not be performed as indicated "." Can't use two assistants for the acquisition of data at the same time?

  I have to add different channels in the same assistant DAQ? I tried, but I couldn't separate the data in different graphs.

  How does this work?

  Kind regards

  Allard

  You can't have multiple tasks of the same type (in this case inputs analog) on the same device.  Just so having 1 DAQ Assistant read all your channels and separate your channels for individual transformation.

• Oracle of the MAF error ' cannot read the DataControl uses on loadDataControl for the id:

  Need help!

  I created a simple SOAP web service for a remote database that works very well in 12 c WebLogic Server and also in the Jdeveloper HTTP Analyzer. When I use the same web service in the attached code, I get the following error (I've included output System.out.println in Ref. to the flow of the code) I use Jdeveloper 12 c MAF 2.0.0.0.41 on Mac OSx 10.9.

  Chk #0

  Processing line # 1

  Chk #1

  Chk #2

  [SEVERE - oracle.adfmf.framework - AmxBindingContext - loadDataControlById] Cannot read the DataControl uses on loadDataControl for the id: WLFNewActWS. [SEVERE - oracle.adfmf.framework - SynchronizationDC - syncDataFromOfflineToOnline] [Ljava.lang.StackTraceElement;@467c53d3

  @

  


  Sorry about that, I think I'm wrong you.

  OK, I created an example to test what goes wrong.

  1. server side, create a project named Employee_ws

  a. Department_ws.java

  public interface {Department_ws}

  public boolean addDepartment (a Department);

  }

  b. Department.java

  public class {Department

  public Department() {}

  Super();

  }

  int departmentId.

  String departmentName;

  locationId int;

  managerId int;

  {} public void setDepartmentId (int departmentId)

  this.departmentId = departmentId;

  }

  public int getDepartmentId() {}

  return departmentId.

  }

  {} public void setDepartmentName (String departmentName)

  this.departmentName = departmentName;

  }

  public String getDepartmentName() {}

  return departmentName;

  }

  {} public void setLocationId (int locationId)

  this.locationId = locationId;

  }

  public int getLocationId() {}

  return locationId.

  }

  {} public void setManagerId (managerId int)

  this.managerId = managerId;

  }

  public int getManagerId() {}

  return managerId;

  }

  }

  c. Department_impl.java

  @WebService

  / public class Department_impl implements Department_ws {}

  public Department_impl() {}

  Super();

  }

  @Override

  @WebMethod

  {} public boolean addDepartment (@WebParam (name = "arg0") a Department)

  If (Department! = null) {}

  int departmentId = department.getDepartmentId ();

  String departmentName = department.getDepartmentName ();

  int locationId = department.getLocationId ();

  managerId int = department.getManagerId ();

  Connection Conn;

  try {}

  Conn = ConnectionFactory.getConnection ();

  conn.setAutoCommit (true);

  Statement šment = conn.createStatement ();

  String inset_sql =

  "INSERT INTO dept (department_name, location_id, department_id, manager_id) VALUES ('+ '.

  departmentId + "," "" + departmentName + "'," + locationId + "," + managerId + ")";

  šment. Execute (inset_sql);

  Returns true;

  } catch (Exception e) {}

  System.out.println (e);

  }

  }

  Returns false;

  }

  }

  d. ConnectionFactory.java

  import java.sql.Connection;

  to import java.sql.DriverManager;

  import java.sql.SQLException;

  Connect to the database

  public class {ConnectionFactory

  public ConnectionFactory() {}

  Super();

  }

  protected static connection conn = null;

  public static connection getConnection() bird Exception {}

  If (conn == null) {}

  try {}

  String driver = "oracle.jdbc.driver.OracleDriver";

  String url = "jdbc:oracle:thin:@localhost:1521:orcl";

  User String = "employee";

  String password = "employee";

  Class.forName (driver);

  Conn = DriverManager.getConnection (url, user, password);

  } catch (SQLException e) {}

  System.Err.println (e.getMessage ());

  }

  }

  return conn;

  }

  public static {} Sub closeConnection()

  try {}

  If (conn! = null) {}

  Conn.Close ();

  Conn = null;

  }

  } catch (Exception ex) {}

  throw new RuntimeException (ex);

  }

  }

  }

  You can run Department_impl.java to start the Web service. i.e. http://127.0.0.1:7001 / Employee_ws-Client-context-root/Department_implPort? WSDL

  Server side sql:

  CREATE USER employee IDENTIFIED BY employee DEFAULT TABLESPACE users

  Temp TEMPORARY TABLESPACE

  Users WE QUOTA UNLIMITED;

  GRANT create employee to logon.

  GRANT alter used to logon.

  GRANT create any employee at table;

  GRANT create trigger employee TO;

  GRANT create any employee to view;

  GRANT create sequence employee TO;

  GRANT create synonym employee TO;

  GRANT create type employee TO;

  GRANT create employee to procedure;

  CREATE TABLE (DEPT

  DEPARTMENT_ID NUMBER (7, 0) NOT NULL,

  DEPARTMENT_NAME VARCHAR2 (50).

  NUMBER OF LOCATION_ID (7, 0),

  MANAGER_ID NUMBER (7.0)

  );

  2 create a mobile application of CRG named Dept

  

  a. Department.java (even for the server)

  b. SynchronizationDC.java

  import java.util.ArrayList;

  import java.util.List;

  Import oracle.adfmf.framework.api.AdfmfJavaUtilities;

  Import oracle.adfmf.framework.exception.AdfInvocationException;

  public class SynchronizationDC {}

  public SynchronizationDC() {}

  Super();

  }

  public void syncDataFromOfflineToOnline() {}

  It's just for testing, so I build Department manually instead of mobile db data, please replace in your business logic

  A Department = new Department();

  department.setDepartmentId (1);

  department.setDepartmentName("1");

  department.setLocationId (1);

  department.setManagerId (1);

  NamesList list = new ArrayList (1);

  List ParamsList = new ArrayList (1);

  List TypesList = new ArrayList (1);

  namesList.add ("arg0");

  paramsList.add (department);

  typesList.add (Department.class);

  try {}

  AdfmfJavaUtilities.invokeDataControlMethod ("Dept_WS", null, "addDepartment", namesList, paramsList,

  typesList);

  } catch (AdfInvocationException e) {}

  System.out.println (e);

  }

  }

  }

  c. new an AMX pag called Dept.amx

  "http://www.w3.org/2001/XMLSchema-instance" xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  Text = "syncDataFromOfflineToOnline."

  Disabled = "#{!}" Bindings.syncDataFromOfflineToOnline.Enabled}"id ="cb3"/ >

  d. deploy on Android Simulator

  

  Click the button and a new record have been db insert through the webservice, search the remote db recording

  

  If above does not solve your problem, please let me know, thanks.

  Byron

• How can I use a video for the preview looks like instead of the fixed image?

  How can I use a video for the preview looks like instead of the fixed image? I use android lollipop.

  Hi Ali,

  Video preview for looks is not currently supported on Android. Your feature request was noted by the team.

  In the meantime, there is a video on the device you want to use as an overview, I would recommend taking a perforated CAP and still image as loading preview.

  Best,

  Bronwyn

• I've been using like Asus for the past five years, but my husband just gave me a Mac for my birthday. I have 5 Lightroom installed from the installation disk on my old computer. Is it possible to transfer to my new? In addition, I don't have a CD player m

  I've been using like Asus for the past five years, but my husband just gave me a Mac for my birthday. I have 5 Lightroom installed from the installation disk on my old computer. Is it possible to transfer to my new? In addition, I don't have a CD drive on my Mac.

  On your Mac, download Lightroom 5.7.1 of

  Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1

  Install and enter your serial number. Serial number Lightroom works on Windows and Mac.

• Good night, I'm just starting bussines Design, I'm not rich enough to buy a license of photoshop, but I am loved to use photoshop, I use photoshop cs2 for the free version? Thank you very much for your attention.

  Good night, I'm just starting bussines Design, I'm not rich enough to buy a license of photoshop, but I am loved to use photoshop, I use photoshop cs2 for the free version? Thank you very much for your attention.

  There is no free version of CS2.  There is only a special version of CS2 available for those who have bought and need to reinstall it.

• I own CS 5Premium. Read the FAQ, it seems, I am eligible to proceed to 6 CS but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month, it's too much for me - do not use this product for the job. The offer of $29 se

  I own CS 5 Design Premium. Read the FAQ, it seems, I am eligible to proceed to 6 CS but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month, it's too much for me - do not use this product for the job. The offer of $29 seems reasonable but $49 is too much. I don't need most of the programs included in the CC, but subscribing to only three of them will cost much more. Really don't know what to do here :-(

  Buy CS6:
  ----------------------

  http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  I believe that the offer of $29 is only for the first year, so you would end up paying $ 49 thereafter.

• Is it OK to buy the student of CC version and I use it mainly for the University, but...

  Is it OK to buy the student of CC version and I use it mainly for the University ... But I sometimes design (Logos, posters... etc) for my friends and other people and I charge for it? ... is legal? because I really care about the small details.

  You are allowed to use the student/teacher version for commercial purposes.

  Education FAQ

• Given the file name or path contains Unicode or DBCS characters. Retry using ASCII characters for the file name and path whatever that means? This happens when I publish an OAM

  Given the file name or path contains Unicode or DBCS characters. Retry using ASCII characters for the file name and path

  What does that mean? It happens when I try to publish an OAM for Dreamweaver.

  Also: How can I specify the onboard browser animate? It's just going as far. Are there no preference to animate it dashboard?

  BTW. Just call him edge. Seriously. You call Illustrator draw? Photoshop editing?

  No, my file name is mainContent.oam

  My project name is mainContent.an

  This error occurs when I try to import into Dreamweaver. Sorry, I was unclear about that earlier.

  I thought maybe it was because I had saved my image as a png image. So re-saved as an svg, still get the error.

  

  Should I have a setting is CC of Dreamweaver that will not? I should try this in Dreamweaver CS6? I might try that next.

  Why is this so difficult program? I know that Flash. I know that After Effects. I can work the chronology part simply awesome. He's still export I have problems.

  On a MacPro, 10.7.

  You are a person of Adobe or simply a beautiful assistance program?