Using TCP on the second ethernet interface

Similar Questions

• Cannot use ps on the second computer

  Cannot use ps on the second computer

  You are allowed to download and install the cloud creative on the second computer as long as you use only one at a time:

  FAQ: Can I install Creative Cloud on several computers?

  If you have some problems to install:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

  If you find errors or have another problem, please provide details.

• If you have CC on two different computers and you forget to sign out how do you use CC on the second computer?

  If you have CC installed on two different computers and you forget to sign out how do you use CC on the second computer?

  Please see this link for more information on the installation of creative cloud on multiple computers:

  FAQ: Can I install Creative Cloud on several computers?

• Using the second ethernet port to connect to the printer?

  Hi I have a Mac Pro 2.1 old school and I'm wondering if I can connect to the network with an ethernet port and connect the latter to a printer?

  If so, how?

  Yosemite running.

  Thank you

  Physically, you use a port and a cable to connect to your network and use the second port and a second cable to connect directly to the printer. The printer must obviously have an interface Ethernet himself.

  However, you need to configure the second port on the Mac and the Ethernet port on the printer for each manually configured the TCP/IP addresses and these should be in a range of different network to your main network.

  If you the main network is something like 192.168.1.1 then your printer and the port on the Mac connection to this need to be in another network, such as 192.168.11.1.

  In theory, if the printer supports Hello aka. mDNS, then maybe you can get away with not having to configure TCP/IP addresses for the connection.

  The main reasons to use a second separate connection as this would be the performance or security, and frankly I don't think that's really relevant here. This would mean that no other computers on your network will be able to access the printer.

• Difference between the series & ethernet interface.

  Hello world

  I have some doubts in basic foods.

  Q1: What are the differences between the interface series and interfaces ethernet.

  Q2: Can we use ethernet interfaces to put an end to a WAN connectivity like series. Why always we use interfaces series to connect the Wan.

  Please help me by answering these questions.

  !!!! THANKS IN ADVANCE!

  Hello

  Fast Ethernet card is one of the option for a higher speed T1/E1, other TDM options that can be offered are DS-3 and STM1 that can be offered on infra nominal basis as well. For example, you can subscribe for 10 MB BW on 45 MB access.

  The answer to your second question, is that there could be a possibility that you have subscribed for VPN (EVPL or VPLS) L2 or L3 VPN (MPLS).

  Woks of L2 VPN on labels VLAN and L3 VPN termiantes on a device of L3.

  concerning

  Navin Parwal

• RA VPN doesn't work is not on the second external interface

  I've temporarily came from two Internet service providers in our ASA 5510.  Which works very well.  I tried to configure the VPN to our second outside interface (outside-XO) and who does not.  The first/original VPN works great.  Can someone look at the config and tell me if I did something wrong.  It is not a customer number, because it is able to connect fine on the first interface.  Thank you.

  ASA Version 7.1 (2)
  !
  hostname FW01
  dot.com domain name
  activate the password * encrypted
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP address *.229.200 255.255.255.192
  !
  interface Ethernet0/1
  Speed 100
  full duplex
  nameif inside
  security-level 100
  IP 192.168.2.3 address 255.255.255.0
  !
  interface Ethernet0/2
  nameif outside-XO
  security-level 0
  IP address *.157.100 255.255.255.192
  !
  interface Management0/0
  nameif management
  security-level 100
  IP 192.168.14.254 255.255.255.0
  management only
  !
  passwd * encrypted
  banner login attention is a private network. Unauthorized intruders will BE prosecuted to the extent of the ACT!
  boot system Disk0: / asa712 - k8.bin
  passive FTP mode
  clock timezone PST - 8
  clock summer-time recurring PDT 2 Sun Mar 2:00 1 Sun Nov 02:00
  DNS server-group DefaultDNS
  dot.com domain name
  permit same-security-traffic intra-interface
  object-group service tcp Server
  HTTPS and www description
  EQ object of the https port
  port-object eq www
  object-group service tcp Mail
  SMTP POP3 access description
  EQ Port pop3 object
  EQ smtp port object
  port-object eq 32000
  non-standard tcp service object-group
  Port Description 1429 and 1431
  port-object eq 1431
  port-object eq 1429
  object-group service DNS tcp - udp
  Description to allow outside DNS resolution
  area of port-object eq
  object-group service FTP tcp
  FTP description
  port-object eq ftp
  SMTPMail tcp service object-group
  Description SMTP only access
  EQ smtp port object
  IQWebServer tcp service object-group
  Www and port 8082 description access
  port-object eq www
  EQ object Port 8082
  EQ object of the https port
  port-object eq 8999
  SFTP tcp service object-group
  Description SFTP_SSH
  EQ port ssh object
  outside_access_in list extended access permit tcp any host *. *.229.201 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.202 object-group Mail
  outside_access_in list extended access permit tcp any host *. *.229.202 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.202 object-group DNS
  outside_access_in list extended access permit tcp any host *. *.229.203 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.229.204 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.205 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.229.208 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.101 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.102 object-group Mail
  outside_access_in list extended access permit tcp any host *. *.157.102 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.102 object-group DNS
  outside_access_in list extended access permit tcp any host *. *.157.103 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.157.104 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.105 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.157.108 - a group of Web server objects
  access-list 150 extended permit tcp any any eq smtp
  access-list sheep extended ip 192.168.0.0 allow 255.255.0.0 10.1.1.0 255.255.255.0
  access-list sheep extended permits all ip 10.1.1.0 255.255.255.240
  Splt_tnl list standard access allowed 192.168.0.0 255.255.0.0
  Splt_tnl list standard access allowed 10.1.1.0 255.255.255.0
  access-list extended webcap permit tcp any host *. * eq.164.210 smtp
  access-list extended webcap permit tcp host * smtp eq.164.210 all
  pager lines 24
  Enable logging
  logging asdm-buffer-size 200
  buffered logging critical
  exploitation forest asdm errors
  Outside 1500 MTU
  Within 1500 MTU
  management of MTU 1500
  outside-XO MTU 1500
  mask 10.1.1.1 - 10.1.1.15 255.255.255.0 IP local pool VPNpool
  mask 192.168.14.244 - 192.168.14.253 255.255.255.0 IP local pool VPNCisco
  ICMP allow any inside
  ASDM image disk0: / asdm512.bin
  enable ASDM history
  ARP timeout 14400
  Global (outside) 1 *. *.229.194
  Global (outside-XO) 1 *. *. 157.66
  NAT (inside) 0 access-list sheep
  NAT (inside) 1 192.168.0.0 255.255.0.0
  public static tcp (indoor, outdoor) * domaine.229.202 192.168.14.166 netmask 255.255.255.255 area
  public static tcp (indoor, outdoor) *.229.202 www 192.168.14.2 www netmask 255.255.255.255
  public static tcp (indoor, outdoor) *.229.202 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
  public static tcp (indoor, outdoor) *.229.202 192.168.14.2 pop3 pop3 netmask 255.255.255.255
  public static tcp (indoor, outdoor) *.229.202 32000 192.168.14.2 32000 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.6.229.203 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.28.229.204 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.205.229.205 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.29.229.208 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.3.229.201 netmask 255.255.255.255
  TCP static (inside, outside-XO) *. * domaine.157.102 192.168.14.166 netmask 255.255.255.255 area
  TCP static (inside, outside-XO) *. *.157.102 www 192.168.14.2 www netmask 255.255.255.255
  TCP static (inside, outside-XO) *. *.157.102 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
  TCP static (inside, outside-XO) *. *.157.102 192.168.14.2 pop3 pop3 netmask 255.255.255.255
  TCP static (inside, outside-XO) *. *.157.102 32000 192.168.14.2 32000 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.3.157.101 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.6.157.103 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.28.157.104 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.205.157.105 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.29.157.108 netmask 255.255.255.255
  Access-group outside_access_in in interface outside
  Access-group outside_access_in in interface outside-XO
  Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
  Route inside 192.168.0.0 255.255.0.0 192.168.2.1 1
  Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
  Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  attributes of Group Policy DfltGrpPolicy
  No banner
  WINS server no
  DNS server no
  DHCP-network-scope no
  VPN-access-hour no
  VPN - connections 3
  VPN-idle-timeout 480
  VPN-session-timeout no
  VPN-filter no
  Protocol-tunnel-VPN IPSec
  disable the password-storage
  disable the IP-comp
  Re-xauth disable
  Group-lock no
  disable the PFS
  IPSec-udp disable
  IPSec-udp-port 10000
  Split-tunnel-policy tunnelall
  Split-tunnel-network-list no
  by default no
  Split-dns no
  disable secure authentication unit
  disable authentication of the user
  user-authentication-idle-timeout 30
  disable the IP-phone-bypass
  disable the leap-bypass
  disable the NEM
  Dungeon-client-config backup servers
  the firewall client no
  rule of access-client-none
  WebVPN
  url-entry functions
  HTML-content-filter none
  Home page no
  4 Keep-alive-ignore
  gzip http-comp
  no filter
  list of URLS no
  value of customization DfltCustomization
  port - forward, no
  port-forward-name value access to applications
  SSO-Server no
  value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information
  SVC no
  SVC Dungeon-Installer installed
  SVC keepalive no
  generate a new key SVC time no
  method to generate a new key of SVC no
  client of dpd-interval SVC no
  dpd-interval SVC bridge no
  deflate compression of SVC
  Cisco strategy of Group internal
  Cisco group policy attributes
  value of server WINS 192.168.14.4 192.168.14.11
  value of 192.168.14.4 DNS server 192.168.14.11
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list Splt_tnl
  field default value *.com
  username * password * encrypted
  username * password * encrypted privilege 0
  username * password * encrypted
  username * password * encrypted
  username * password * encrypted
  username * password * encrypted privilege 15
  username * password * encrypted privilege 15
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 outdoors
  http 192.168.0.0 255.255.0.0 inside
  http 192.168.1.0 255.255.255.0 management
  http 192.168.14.0 255.255.255.0 management
  http 0.0.0.0 0.0.0.0 outside-XO
  SNMP-server host within the public 192.168.14.27 of the community
  location of the SNMP server *.
  contact SNMP Network Admin Server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
  dynamic-map of crypto-XO_dyn_map 10 outside the value transform-set ESP-3DES-SHA
  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
  outside_map interface card crypto outside
  outside-XO_map 65535 ipsec-isakmp crypto map outside Dynamics-XO_dyn_map
  card crypto outside-XO_map interface outside-XO
  ISAKMP allows outside
  ISAKMP enable outside-XO
  part of pre authentication ISAKMP policy 10
  ISAKMP policy 10 3des encryption
  ISAKMP policy 10 sha hash
  10 2 ISAKMP policy group
  ISAKMP life duration strategy 10 86400
  ISAKMP nat-traversal 20
  IPSec-attributes tunnel-group DefaultL2LGroup
  ISAKMP keepalive retry threshold 600 10
  IPSec-attributes tunnel-group DefaultRAGroup
  ISAKMP keepalive retry threshold 600 10
  tunnel-group, type Cisco ipsec-ra
  attributes global-tunnel-group Cisco
  address pool VPNpool
  Group Policy - by default-Cisco
  tunnel-group Cisco ipsec-attributes
  pre-shared-key *.
  ISAKMP keepalive retry threshold 600 10
  Telnet 192.168.0.0 255.255.0.0 inside
  Telnet 192.168.14.109 255.255.255.255 inside
  Telnet 192.168.14.36 255.255.255.255 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 10
  management-access inside
  dhcpd lease 3600
  dhcpd ping_timeout 50
  !
  INSPECT class-map
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  Policy-map global_policy
  class INSPECT
  inspect the dns
  inspect the http
  inspect the icmp
  inspect the tftp
  inspect the ftp
  inspect the h323 ras
  inspect h323 h225
  inspect the snmp
  inspect the sip
  inspect esmtp
  class inspection_default
  inspect the ftp
  !
  global service-policy global_policy
  TFTP server inside 192.168.14.21 TFTP-root /.
  192.168.14.2 SMTP server
  Cryptochecksum:5eedeb06395378ed1c308a70d253c1b6
  : end

  Hello

  Should work.

  What I think is the routes:

  Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
  Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65

  If the first interface is ok, the ASA does not go to route packets via the second interface, so VPN will be not through this interface.

  On the client, can you PING the two IPs outside of ASA or only the first?

  Try to add a static route on the SAA to secondary education outside interface pointing to the address of the customer and try to connect via VPN and see if it works.

  Orders:

  HS cry isa his

  HS cry ips its

  Will be a big help as well, when the VPN connection attempt failed.

  Federico.

• additional NIC connected to the second router interface does not have IP

  Hi I have an esxi5 running on the hp with two physical NICs micro server that is visible on esxi as vmnic0 and vmnic1. Initially, I was working with vmnic0 as a main network as the interface of management and also VM NIC that is connected to my internet. No problem here. Now, I plugged the second card which is represented as vmnic1 to another router in my house that has its own separate subnet by wire of physics. This second router has its own Dhcp and set up correctly as I connect my mobile phone and tablet that and gets its ip DHCP server. However vmnic1 receives not all IP address. Here is the configuration:

  Phys. netcard vmnic0 192.168.1.254 (obtained from internet router ip) no problems, related to the management network vSwitch0

  Phys. netcard vmnic1? any IP connected to separate vSwitch2, physical network is connected to the router with DHCP with the range 10.0.1.2 10.0.1.1 - 10.0.1.100

  To debug effort, I imported vmnic1 in the virtual machine running on that ESXi and static ip address assigned 10.0.1.101, whereas it falls in the same subnet as the second router and tried to ping router (10.0.1.1) however got "destination unreachable". Obviously ping can't the second router.

  So my question is why? Can anyone help on this?

  I put below the esxi Network Setup:

  Thank you!

  I just pointed it arbitrarily when I created vSwitch2, does not interfere the vSwitch0. 2nd router lacks any setting of vlan.  Should not do and leave the vlan by default? Thank you

• PSC 1804 stops when the second PC connected to the second ethernet card

  Hello

  Having a problem with two PCs and a PSC 1804.

  I currently have a PSC 1804 connected to a PC running a VI, childless.

  I updated the VI with a series of shared variables that I need to read and answer from another PC about 20 feet away.

  I wanted to connect the two PCs via a crossover ethernet cable, but when it is connected, the CFP crashes (as seen in MAX and the crash of VI).

  Both PCs and PCP are on separate static IP, but most likely the same subnet. This will cause the crash? How can I correct this problem and continue to use shared variables?

  Any thoughts would be appreciated.

  LV 2013 Pro

  Hi, ASAT,.

  You should be able to use a router or a switch to a situation like this.  What system hosts shared variables?  This system will be accessible to all systems on the network of communication success.  How do you connect all currently?  I recommend the use of a switch to connect all on the same network, then all systems need access to shared variables.  The host computer should not have a problem with several networks, but in this case, he has trouble with communication, by disabling the system-wide network is recommended.  Let us know how things are running.

• Using WRT54G as the second wireless with E2500

  Have read the threads on this, I want to make sure I have this correct.

  Currently I use the E2500 as my main router at my house (top).  I replaced my WRT54G with the E2500 to my DSL connection throughout the House.

  I run an ethernet as a hard link at the bottom of my smart TV cable.

  I now add another device (Channel Master DVR +) that it will also take an internet connection.

  I need two connections from an ethernet cable (already run down).  After reading a bit, looks like I can use my old WRT54G as a secondary router/switch down.  (Sorry if I'm not using the correct terms).

  In order to get my two connections (Smart TV and DVR +) I need at least a separator, or something?  However... "Why not extend my lower wireless for a stronger wireless connection down?" was my way of thinking.

  How can I configure my E2500 to recognize the WRT54G - run two difficult connections to my TV and DVR + and also extend a stronger signal wireless downstairs for my daughters iPod Touch?

  Thanks - Glen

  Who did the trick! You Rock! Thank you so much cub for your help and quick of Reid. I may be back later this week when my DVR + gets here but hope not. Thanks again!

• Question about using Lightroom for the second time.

  I used Lightroom 1 when it came out but stopped using it for a period of time. I deleted all preferences and the app. All photo in Lightroom folders were also deleted after that I moved the images. I had to reinstall Mac OS x, so I cleaned my HD and reinstalled. So I had a clean slate.

  
  

  In any case, I reinstalled Lightroom 1 so I could buy the upgrade of LR 2. Then I installed 2 LR. But what I don't understand is... my nameplate, preferences and other little things that I had set up in Lightroom 1 returned when I open Lightroom 2. Does anyone know how this is even possible, given what I mentioned above? No matter what help understand this would be greatly appreciated because I want to have a completely fresh start. Thank you.

  Jbshanks1

  As well as preferences, look in Application Support / Adobe/Lightroom.

  John

• CMS OVA, adding the second NETWORK card breaks the first NETWORK card

  I'm testing CMS 2.0 and when I try to add a second NETWORK card in VMware, he immediately interrupts the first network card.  As soon as the loading of the image, the first NIC fails.  Even if I disable iface b, it will allow all traffic where iface one.  If I stop the application, remove the NETWORK adapter and run it back again, it works very well to the iface one.

  I want to test the public face with box feature, but I can't if I can't add a second network card.

  How do you add the second network interface and interface you add?

  You should add 'VMXNET3' type if you use VMWare, if you chose something else, you invalidate your license, see section 3.3 of the virtualized CMS 2.0 Setup Guide for deployments.

  If you need assistance, you must move this thread to the section of telepresence of forums, where this device is actively discussed.  You can change your question and change the categories at the bottom of the page.

• Disappears on the screen during the research on the modern user interface

  Original title: questions on screen keyboard

  I have a problem of access to keyboard on screen when using specific features of Windows 8. The problem only occurs with my desktop PC, I also have a Surface Pro 3 without any problems. The problem is that whenever I search for something, either in the charms on the right shortcut window drag the keyboard screen on just disappears and cannot be reopened until I have cancel the search. Same thing in fashion Metro/modern, while searching for an app. However the problem does not seem to influence the research done in desktop mode in the my PC popup.

  The Office I mainly use as a media center device for watching videos in different rooms when the office is physically. I can still use a physical keyboard to use searches, but sometimes my keyboard is not right next to me, while my mouse is always next to my hand. I found it faster to just short-circuit the keyboard input with the keyboard screen on when I browse the web. I know that the function should work because I do it all the time with my surface. Even with my keyboard attached to the surface, if I folded it with the kickstand on the back of the keyboard or just manually, click on the button of keyboard on screen with the keyboard typing normal position I can always get the screen keyboard works without any problem. I checked also with just my regular Asus laptop and who has the same problem as the office. This isn't really a problem with the laptop even if, as it is a standard design where the keyboard is not move or come off. Anyone has any ideas, it could be the cause? Thanks in advance to anyone who responds

  Hi Will,

  Welcome to the Microsoft community.

  • Using the screen keyboard or touch screen?

  There are two types of virtual keyboards on Windows 8, on-screen keyboard and touchpad. You may experience this problem if you are using a touchscreen keyboard on the task bar. We have checked this on our computer of Windows 8 and its default value of design.

  If you use the screen keyboard and the keyboard should not disappear if you use it in the modern user interface. Please confirm what virtual keyboard you use to help you also.

  You can read this article and check if it helps:

  How to use the touch keyboard

  http://Windows.Microsoft.com/en-us/Windows-8/using-touch-keyboard

   

  Use the keyboard to the screen (OSK) to type

  http://Windows.Microsoft.com/en-us/Windows-8/type-with-the-on-screen-keyboard

   

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Use the second airport only ethernet

  Here's what I want to do:

  I have 2 extremes of the airport. One on the second floor, connected to a modem. And the other on the first floor. I want the second Airport extreme on the first floor to connect to the Internet via the first airport extreme but only use its ethernet Sockets and turn off its own wifi. Which means the only way to use this airport for you to connect to the Internet is to use its Ethernet port. Is this possible?

  Possible if the first floor AirPort Extreme connects to the AirPort Extreme with a permanent floor, wired Ethernet cable.

  Is not possible if you want that the first floor AirPort Extreme to connect to the second floor AirPort wireless.

• using tcp replacement reset interface

  Hi I'm new to cisco ips. can someone tell me pls the function to use the alternative interface for tcp reset.

  I have 2 interfaces for IP addresses. a command and control and other interface is an interface in promiscious mode.

  without this command the ID can send some tcp resets. or because it uses a different interface for tcp resets.

  can someone tell me pls.

  concerning

  Assane

  Under most of the facilities the tcp replacement reset interface is not necessary.

  By default the ports TCP resets will come back on the same interface where the attack was detected.

  So if your interface promiscuity is connected to a 100 Mbps for tracking hub then the tcp reset will be sent back this same interface promiscuitee in the hub.

  Or if your interface promiscuity is connected to the span switch port, the tcp reset will be sent back the same interface of promiscuity in that span port.

  The question becomes is the sensor can send reset tcp, but if the switch will accept them. Various switches will accept from the span port tcp resets. Some switches require only an extra parameter on the extended configuration to tell the switch to allow incoming packets to the span port.

  BUT there are some switches that do NOT allow incoming packets of their span ports.

  These ituations are the reason for the replacement tcp reset the configuration of the interface.

  Need 2 remote sensing interfaces (one for surveillance of promiscuity and the used the other as just replacing tcp reset interface). The port command and control NOT allow as the other tcp reset interface.

  Connect to the interface promiscuity to the scope of the switch port. You configure the second interface as the alternate tcp reset interface of the first interface of promiscuity. Then plug the second interface on the switch of the saem (but do not have the 2nd one a span port).

  Now, when the sensor detects an attack on interface 1 it will NOT send tcp resets the interface 1, but rather will send the reset tcp on the 2nd interface.

  Given that the switch does not accept that the tcp resets since the span port you need of the second interface for tcp resets in the switch.

  It is also possible with taps where the taps (because the taps have no way to accept incoming packets).

  The alternative tcp reset interface configuration is ignored when it is configured for online tracking. It is used only with supervision of promiscuity.

• Satellite P50t-B01E - BD Player does not play using the second screen

  Using PC mode "extend", dragging player across the second screen causes reader Toshiba BR disable playback of the disc. The drive interface moves on, but the game is not possible.

  Other media and the information can be consulted. Connecting via HDMI.

  Thanks in advance.

  I guess you will be able to use the player Blu-switching the video output for external monitor without the use of the extended mode.

  Could you confirm this?