Using WRT54G as the second wireless with E2500
Have read the threads on this, I want to make sure I have this correct.
Currently I use the E2500 as my main router at my house (top). I replaced my WRT54G with the E2500 to my DSL connection throughout the House.
I run an ethernet as a hard link at the bottom of my smart TV cable.
I now add another device (Channel Master DVR +) that it will also take an internet connection.
I need two connections from an ethernet cable (already run down). After reading a bit, looks like I can use my old WRT54G as a secondary router/switch down. (Sorry if I'm not using the correct terms).
In order to get my two connections (Smart TV and DVR +) I need at least a separator, or something? However... "Why not extend my lower wireless for a stronger wireless connection down?" was my way of thinking.
How can I configure my E2500 to recognize the WRT54G - run two difficult connections to my TV and DVR + and also extend a stronger signal wireless downstairs for my daughters iPod Touch?
Thanks - Glen
Who did the trick! You Rock! Thank you so much cub for your help and quick of Reid. I may be back later this week when my DVR + gets here but hope not. Thanks again!
Tags: Linksys Routers
Similar Questions
-
original title: WiFi
I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.
I use a Huawei E585. I simply want to clamp it alll in the tray.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
(1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).
(2) START, CONNECT, WIRELESS INTERNET CONNECTION
--> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~! (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;
--> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network
3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)
-
I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122
Try this below and see if it help you.
-
Want to ask if the second pc with ssd may be authorized by the same key as magnetic
HI.i have a desk with two internal disks.one magnetic and I a ssd.in the first 10 of an update of windows windows 7 .i want to ask if the second pc with ssd may be authorized by the same key as magnetic
Hello
Thanks for the reply.
It is good to know that you have obtained the required information.
Please do not hesitate to answer, if you have any other questions about Windows.
Thank you
-
Cannot use ps on the second computer
Cannot use ps on the second computer
You are allowed to download and install the cloud creative on the second computer as long as you use only one at a time:
FAQ: Can I install Creative Cloud on several computers?
If you have some problems to install:
FAQ: How to download and install the Adobe Creative Cloud Desktop App?
FAQ: How to download and install creative cloud applications?
If you find errors or have another problem, please provide details.
-
If you have CC installed on two different computers and you forget to sign out how do you use CC on the second computer?
Please see this link for more information on the installation of creative cloud on multiple computers:
-
Each Adobe Mobile App I want to install from the game store Android Google indicates that it is not compatible with my Samsung Galaxy Note 10.1 tablet, but some are compatible with my phone Samsung Galaxy Note 4. I prefer to use mobile apps on my tablet on not on my phone. Can someone explain why I can't use mobile apps on my tablet. I thought that mobile applications are compatible with the tablets and phones?
(Double Post)
-
Can I use the mouse wireless with my Satellite M30x?
Hello
I have a question. I have the Satellite M30x and my dealer me Toshiba PA3205U-1ETC optical wireless mouse will sell. In information he said that's the only specific laptop models.
Can I use it with my laptop? At my laptop this specific wireless adapter?Welcome them
s.Wille
Sorry for my bad EnglishWhy not.
I use a mouse wireless at home. Pout station is connected to the USB port and the mouse communicates with the wireless station.I put t see any reasons why you shouldn't t be able to use these mice.
Greetings
-
I have a wired to the internet using my base station for 4 expresses the hard extreme airport. I want to replace the base station with a time capsule.
It is also easy to replace the existing base station and adding the name of the network and the password?
You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:
ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.
-
Install the second instance with tns own
Hello world
I depending on the situation: we have Windows 2008 Server, I installed oracle 11g Standard Edition database. I want to install a second instance on this server.
I try to use oracle database configuration manager and the installation was successful. But I can't connect to my trial because I got the error 'No TNS Listner'.
So I create a second with the oracle network utilities. But I can not connect to the server, so I take a look at the service, there where two headphones started my new and TNSListener so I looked in the listener.ora there where only my new listener.
After that, I restart the database but I sill got the error message and I could not service my trial dbconsole.
So I remove the second instance.
I want to ask if anyone has a tip for me or a best practice how to install a second instance with an own listener.
Greetings
How to install a second instance with an own listener.
You need a listener of the second. Simply create the new database and your real listener is more than enough.
-
Duplicate option data address for the second plaintiff with a checkbox
I have been in charge of research and trying things out for hours, without success.
I don't know if it's about PDF forms or if I should post on the forum of Java, but here it is:
I have a PDF form with several fields to send the address (address, city, province) data. The application also has a box on another page of the form to a second applicant. The second applicant is a playground of their mailing address too.
I would like to create a box for the second plaintiff who says 'Even that first applicant', so that if the address data is checked all three fields automatically fill the same information that were completed for the first applicant in these areas.
I guess it could be something that required some custom JavaScript, but I know very little about how to write code. I've tinkered with a few think that I found online, but nothing seems to work. Any information that could help me would be very appreciated.
A little more complicated, but not by much. So basically, you can use this script as the box MouseUp action (notice, I used here generic domain names, you can replace them with real numbers in your file):
if (event.target.value=="Off") { // the box is NOT ticked this.getField("Target1").value = ""; this.getField("Target2").value = ""; this.getField("Target3").value = ""; this.getField("Target4").value = ""; this.getField("Target1").readonly = false; this.getField("Target2").readonly = false; this.getField("Target3").readonly = false; this.getField("Target4").readonly = false; } else { // the box IS ticked this.getField("Target1").value = this.getField("Source1").valueAsString; this.getField("Target2").value = this.getField("Source2").valueAsString; this.getField("Target3").value = this.getField("Source3").valueAsString; this.getField("Target4").value = this.getField("Source4").valueAsString; this.getField("Target1").readonly = true; this.getField("Target2").readonly = true; this.getField("Target3").readonly = true; this.getField("Target4").readonly = true; }
-
root.sh defect on the second node with ' ora.asm - init ' failed
The completing the two roots of scripts on the first end, but on the second node node, I get:
[root@alvis oracle] # /home/oracle/app/11.2.0/grid/root.sh
Run the script root.sh from Oracle 11 g...
The following environment variables are defined as:
ORACLE_OWNER = oracle
ORACLE_HOME = /home/oracle/app/11.2.0/grid
Enter the full path of the local bin directory: [usr/local/bin]:
The 'dbhome' file already exists in the usr. Overwrite it? (y/n)
[n]: y
Copying dbhome to usr...
The 'oraenv' file already exists in the usr. Overwrite it? (y/n)
[n]: y
Copying oraenv to usr...
The 'coraenv' file already exists in the usr. Overwrite it? (y/n)
[n]: y
Copying coraenv to usr...
Entries will be added to the/etc/oratab file according to the needs of
Assistant configuration database when a database is created
Finished to turn the generic part of the root.sh script.
Now root product-specific actions will be performed.
2012-05-11 11:19:58: the analysis of the host name
2012-05-11 11:19:58: verification of superuser privileges
2012-05-11 11:19:58: user has superuser privileges
The file of configuration settings using: /home/oracle/app/11.2.0/grid/crs/install/crsconfig_params
ADD LOCAL MODE
Creating OCR keys for the user "root", "root"... privgrp
Successful operation.
Adding to inittab demon
CRS-4123: Oracle high availability Services started.
starts ohasd
ADVM/ACFS is not supported on oraclelinux-release-6Server - 2.0.2.i686
CRS-4402: the CSS daemon has been started in mode exclusive, but found an active CSS daemon on the node betoracle, number 1 and ends
An active cluster was found at the exclusive start, start to join the cluster
CRS-2672: attempt to start 'ora.mdnsd' on 'alvis '.
CRS-2676: beginning of 'ora.mdnsd', the 'alvis' successful
CRS-2672: attempt to start 'ora.gipcd' on 'alvis '.
CRS-2676: beginning of 'ora.gipcd', the 'alvis' successful
CRS-2672: attempt to start 'ora.gpnpd' on 'alvis '.
CRS-2676: beginning of 'ora.gpnpd', the 'alvis' successful
CRS-2672: attempt to start 'ora.cssdmonitor' on 'alvis '.
CRS-2676: beginning of 'ora.cssdmonitor', the 'alvis' successful
CRS-2672: attempt to start 'ora.cssd' on 'alvis '.
CRS-2672: attempt to start 'ora.diskmon' on 'alvis '.
CRS-2676: beginning of 'ora.diskmon', the 'alvis' successful
CRS-2676: beginning of 'ora.cssd', the 'alvis' successful
CRS-2672: attempt to start 'ora.ctssd' on 'alvis '.
CRS-2676: beginning of 'ora.ctssd', the 'alvis' successful
CRS-2672: attempt to start 'ora.asm' on 'alvis '.
CRS-5011: control of resources '+ ASM' failed: details at "(:CLSN00006:))" "in ' / home/oracle/app/11.2.0/grid/log/alvis/agent/ohasd/oraagent_oracle/oraagent_oracle.log '.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux error: 2: no such file or directory
Process ID: 0
Session IDs: serial number 0: 0
ORA-48108: invalid value for the parameter in init.ora diagnostic_dest
CRS-5011: control of resources '+ ASM' failed: details at "(:CLSN00006:))" "in ' / home/oracle/app/11.2.0/grid/log/alvis/agent/ohasd/oraagent_oracle/oraagent_oracle.log '.
CRS-2674: beginning of 'ora.asm', the 'alvis' failed
CRS-2679: attempt to clean "ora.asm" on the "alvis".
CRS-5011: control of resources '+ ASM' failed: details at "(:CLSN00006:))" "in ' / home/oracle/app/11.2.0/grid/log/alvis/agent/ohasd/oraagent_oracle/oraagent_oracle.log '.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux error: 2: no such file or directory
Process ID: 0
Session IDs: serial number 0: 0
CRS-5011: control of resources '+ ASM' failed: details at "(:CLSN00006:))" "in ' / home/oracle/app/11.2.0/grid/log/alvis/agent/ohasd/oraagent_oracle/oraagent_oracle.log '.
CRS-2681: clean 'ora.asm' on 'alvis' successful
CRS-4000: Start command has failed, or completed with errors.
Return code of 1 (256) control command: /home/oracle/app/11.2.0/grid/bin/crsctl start resource ora.asm - init
Beginning of the resource ' ora.asm - init ' failed
Could not start ASM
The Oracle Clusterware boot failure battery
To get to this point, I'm already have to do:
ls - la /tmp/.oracle/ /var/tmp/.oracle/ /usr/tmp/.oracle/ in another terminal, and as soon as I see the files increase I do
/ bin/dd if=/var/tmp/.oracle/npohasd of = / dev/null bs = 1024 count = 1 due to the publication (inappropriate ioctl) in the https://forums.oracle.com/forums/thread.jspa?messageID=9579932
Any ideas?OK, default ORACLE_BASE is/home/oracle/app/oracle
the directory does not exist a single node2 and cannot be created as/home/oracle/app is owned by root: oinstall, only root has write permissions there and in some way, it has not been created
ASM runs as user oracle, so it can not create the/home/oracle/app/oracle/diag/asm directory for newspapers/traces of ASMthe 2nd node:
try to create the directory/home/oracle/app/oracle manually with appropriate permissions (oracle: oinstall, 755, even as on node1)
Then run /home/oracle/app/11.2.0/grid/crs/install/rootcrs.pl - deconfig-force (to unconfigure the clusterware failed battery config)
Run root.sh again -
Re: Satellite Pro L100 - couldn't pass on the card wireless with FN + F8
Hello
I have the same problem with my laptop Satellite Pro L100 and M70.
I installed with new XP SP3 and installed the drivers, but I could not pass over the WiFi connection with the FN + F8 key.
What can I do?Kind regards
Csaba
Hello
Generally, it should be able to activate the Wlan using FN + F8 key combination.
But before that you would use this combination of keys that you must also activate the WLan switch which is placed on the side of books.
If you are not able to use the FN + F8 key combination, then you must install the drivers as Hotkey Utility, utilities and tools.
On the European driver Toshiba page you will find Instructions install txt file. This file shows you the installation order correct driver
See you soon
-
Using TCP on the second ethernet interface
Hello
I use a PXI 8109 Pharlap module running.
I try to use the second my PXI ethernet interface to send UDP and TCP packets. The main interface is used to manage channels Veristand.
Here is the configuration of my two ethernet interfaces:
-eth0 (primary):
IP: 10.0.0.3
subnet mask: 255.0.0.0
-eth1:
IP: 192.168.10.9
subnet mask: 255.255.255.0
For UDP, I have no problem, the packets are sent to the second interface as I want to. I think it works because there is an entry "network address" on the "Open UDP" VI so that the system can choose the right interface.
For TCP, I use the VI "to open a TCP connection" but there is not that kind of entry. And it does not work: I suppose that the system tries to use the main interface, but it can route packets...
For more information, my two networks is physically independent.
Can you help me find out what is happening? Is it possible to use the TCP protocol on the second ethernet interface?
Thank you very much
Kind regards
Laurent
-
LOVs using cascading on the Page elements with values exceeding 4000 characters
A few days ago, I asked a question on the community, but it turned out that there was something wrong with my account and they have removed the item, so I'll just post the solution I found here now:
Well, I found a way to use LOVs cascading on page elements with values exceeding 4000 characters:
Let's say I have a shuttle named P1_ORGANISATIE with "List of values" box, a dynamic LOV named "Source: lists of values Query" containing the value:
Select NAAM as display_value, ID like return_value
of NINEHAM
order by 1
If the number of records-NINEHAM is insufficient, the length of the value of P1_ORGANISATIE, which is a list of concatenated with colon separated digital ID, can exceed 4000 characters.
Now, suppose I have a list of selection called P1_TEST that is connected through "List of values"-> "Cascading LOV Parent article (s)" with P1_ORGANISATIE, using a named LOV dynamic with "Source: lists of values Query" containing:
Select distinct TST. NAAM as display_value, TST.ID as return_value
of the OTE NINEHAM
Join the AFDELINGEN ADG ON (ADG. OTE_ID = OTE.ID)
Join the DEELNEMERS DNR ON (DNR. ADG_ID = ADG.ID)
Join TESTDEELNEMERS TDR WE (TDR. DNR_ID = DNR.ID)
Join TESTEN TST ON (TST.ID = RDT. TST_ID)
where instr (":" |: P1_ORGANISATIE |) '':'', '':'' || OTE.ID | :'') > 0
order by 1
In this case, when P1_ORGANISATIE exceeds 3998 characters, you'll get an "ORA-01704: string literal too long"-error and the P1_TEST will show an element called "undefined".
A way around this is possible because for a named LOV, you can use a "function that returns a sql query" instead of a simple sql query. In other words, we can apply in the context of PL/SQL and thus have maximum for expressions of 32767 instead of 4000 characters. In addition, it is possible to use the two APEX_UTIL. STRING_TO_TABLE and APEX_COLLECTION.
Setting "Source: lists of query values" on the LOV appointed to P1_TEST with the following code will work:
DECLARE
l_selected APEX_APPLICATION_GLOBAL. VC_ARR2;
l_qry varchar2 (32767): =.
"Select distinct TST. NAAM as display_value, TST.ID as return_value
of the OTE NINEHAM
Join the AFDELINGEN ADG ON (ADG. OTE_ID = OTE.ID)
Join the DEELNEMERS DNR ON (DNR. ADG_ID = ADG.ID)
Join TESTDEELNEMERS TDR WE (TDR. DNR_ID = DNR.ID)
Join TESTEN TST ON (TST.ID = RDT. TST_ID)
$1
order by 1';
BEGIN
IF: P1_ORGANISATIE IS NULL
OR LENGTH(:P1_ORGANISATIE) < = 4000
THEN RETURN
Replace (l_qry
,'$1'
,' where instr (":" |: P1_ORGANISATIE |) '':'', '':'' || OTE.ID | :'') > 0'
);
ON THE OTHER
l_selected: = APEX_UTIL. STRING_TO_TABLE(:P1_ORGANISATIE);
APEX_COLLECTION. CREATE_OR_TRUNCATE_COLLECTION (p_collection_name = > 'ORGANISATIE_COLLECTIE');
FOR id IN 1.l_selected.count
LOOP
APEX_COLLECTION.add_member (p_collection_name = > 'ORGANISATIE_COLLECTIE')
, p_n001 = > to_number (l_selected (id))
);
END LOOP;
RETURN
Replace (l_qry
,'$1'
,'join apex_collections ON APC (APC. COLLECTION_NAME = "ORGANISATIE_COLLECTIE" AND APC. N001 = OTE.ID)"
);
END IF;
END;
Andreas Groenevelt says:
A few days ago, I asked a question on the community, but it turned out that there was something wrong with my account and they have removed the item, so I'll just post the solution I found here now:
Something was wrong with the whole site: AP invoice tolerance
I don't post anything substantive until we find out what is happening.
Maybe you are looking for
-
I have an Ipod 6 - there 9.3.1 update and it does not load my pictures on my pc more - any ideas why?
-
Satellite Pro L40 PSL43E - need Bios for Win XP
Need Bios Update for Windows XP to my laptop Satellite Pro L40 PSL43E Ty
-
Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?
-
BlackBerry WebWorks app via a URL with the parameters of launch?
I have an application of WebWorks I want to start with a URL to the browser and pass parameters to query URL to the application in this way. Is this possible? How? I would be happy to use HttpFilterRegistry or API call, but I don't see how to use the
-
Problems installing the Java tools
I'm new to Java development, and I have a problem with the basic tools in place. I am running Windows XP, installed Java (TM) SE Development Kit 6 Update 17 and tried several versions of Eclipse. Installed Eclipse version 3.5.1 then downloaded JDE pl