Sat Pro L10 - loss of display Num/Caps Lock indicators and Volume level

Similar Questions

• HP Compaq Presario CQ62 blank display, solid caps lock light light orange, solid f12

  Good afternoon

  Currently, I'm stumped on troubleshooting lights error code for a hp compaq cq62 customers. I tried the hard reset, the reinstallation of the memory and even plug the laptop directly into the wall instead of a surge protector with battery removed. I can't find any solution on the HP site or any other site of forum for this issue as to what a solid caps lock light and a solid orange light on the f12 key.

  Currently I think the customer may need a new back light system or a new processor. Before to come to this conclusion, I hope that there is a clear solution for my problem. Thank you for any assistance.

  Hello @NotURt3kSupport ,

  Welcome to the HP Forums!

  I understand you are having problems starting your PC clients laptop Compaq CQ62.

  A single glance on the caps lock light usually means it is a failure of the CPU and requires a replacement of CPU or the motherboard.

  Also try to go through these documents to resolve startup problems:

  Computer does not start and the lights blink or the computer will beep.
  Troubleshooting of the black screens with no start-up or start-up error message.
  Tests of hardware failures (Windows 7, Vista) or hardware failures (Windows 8).

  You can tell if the backlight is the issue or start by plugging in a VGA monitor to see if the screen is displayed or not. If this is the case, you have on the laptop display problems. If it isn't, you're dealing with a problem of CPU, GPU or motherboard.

  Also, it would be useful to know what product and the operating system you are using. For more information on the search for your model and product numbers, click here: How can I find my model number or product number? What version of Windows you are using, click here: Windows operating system am I running?

  In the event of hardware failure I suggest you contact the services options HP telephone support. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

  Hope this information helps!

• HP pavilion dv6-1245dx won't boot screen logo, grid screen, caps lock, shift and numluck work

  * little background, my laptop works well before it happened, I stopped and then tried to power it using after a minute I Gilles down, it starts and then when I try to use internet, the display suddenly blacked out, thought it was the power so I tried to power it again I get is bright with no logo so I turn it on and turn it on again then it became lines graph form tried to check if keyboard works numlock and capslock not working when I press it, ang wireless volume does not work

  HP pavilion dv6-1245dx won't boot screen logo, grid screen, caps lock, shift, and numluck work.

  I tried to remove the battery and press hold power button almost 60 sec to reset the bios always the same, I tried the reinstallation of the memory 2 still the same please help

  problem solved... saw something on the forum about pressing f10 or f11 I randomly pressed start magically work

• HP Pavilion G6: Black screen, Cap lock blinks and turned on wifi in orange

  Bought this non-functional computer for $40.  The screen is black, the caps lock flashes and the wifi light is lit in orange.  At the time, we could hear all the computer starts, the fan would go, the drive initialize... so I watched a few videos on the problems of black screen on youtube, he got up and running.

  However, it is a tease, she worked for less than a month.  I does not solve the problem which has been heat.  I buy quadfans for going below but they turned off during the night and should not have.  I have the computer to check the updates at 03:00, so the computer would then come and fans wouldn't.

  Well, the black screen problem is backkkk.  The fan don't dΘmarre, try the hard drive.  This time nothing is set.  Ive pulled the motherboard to replace the fan.  I replaced and updated the hard drive and memory... still nothing.   It also has a new battery and power cord.  Any suggestions as to what may be the problem?

  Hello @Kureeeus1,

  Thanks for the quick response!

  Try to review the following document and let me know how it goes:

  Computers laptops HP - computer will not start and emits a LED or a beep Code

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Sat Pro L10: Disable the wake on lid sensor

  I have a Satellite Pro L10 and disable all power on/set off the power of the actions that occur when the lid is closed - that's very well under windows, and I have disabled things sur-cloture in the power supply of the control panel section. BUT in PARTICULAR, I want to disable the automatic turning on when the lid is opened (i.e. a Bios or other material toshiba parameter). Where can I do this?

  Hello

  I think that light will be activated if the device is in stand-by or hibernation mode. If you open the cover, the device starts automatically.

  If the device turns and you close the lid that nothing will happen if you defined any action. I think that just display will be switched off, but after opening the lid he display will be activated immediately.

  Auto lights up when option doesn t open cover exist.

  Good bye

• Sat Pro L10 DVD Super Multi Drive

  I have a new Satellite Pro L10 with DVD Super Multi player running XP Pro. I was not able to write on the DVD player - either it does not recognize the DVD in the drive or it blue screens and crashes when I use the Windows backup installation until I read the error message. Now I get very nervous, I could not support the 6 weeks I got it...
  I can play the pre-recorded (of movies) DVD in the drive and it can read CDs and some brands of DVD. The manual is singularly useless on the use/troubleshooting of the Super Multi drive

  Hi Christine,

  I don't think you can use the Windows backup to record directly to CD or DVD. The following is an excerpt from the Microsoft web site: -.

  • .......... Unfortunately, the Windows backup utility cannot save files directly to a CD - RW disc.

  Have you tried the software to burn DVDs. I think that you should have Sonic RecordNow and Windvd.

  HTH

• Sat Pro L10: Cannot install printer

  Hello

  I have a portable Satellite Pro L10 and have had problems to install an HP photosmart 7350 printer.
  After installation if I try to print, the computer indicates a failure to print warning. This printer works very well on my main computer that is running windows 98. So I tried a brand new HP PSC 1610 with the same result.

  But when I tried a friends HP Jet 5500 desktop it works very well. I tried to reinstall the operating system using the restore disc that came with the laptop for each printer has been tried with a new installation every time. Has anyone else had this problem and managed to solve it?
  Any help would be appreciated.

  Thank you
  Tony Jones

  Hello

  Unfortunately, I never heard talk about this. But I don't think it's a problem of unity because another printing works correctly.
  In my opinion, you should check the printer drivers.
  If you have problems with printer drivers, try to use the original OS drivers.

  Good bye

• Sat Pro L10: built in WLAN issues

  Hello

  I am using the inprocomm WLan on a new satellite Pro L10 running XP Pro with Windows zero configuration disabled.

  I have 2 routers netgear acting as access points, with several other wireless devices work well.

  I found a few problems:
  local network utility does not define the WEP key at startup (and does not work with reliability of boot).
  You cannot run the utility except if connected as an admin user.
  profile settings not retained "broad machine", only by the user.
  the support inprocomm website does not appear to exist (www.inprocomm.com.tw).

  most are small problems, but the lack of reliable startup is a major problem. I had an another toshiba I got before reliable machines, but this feels like the beta test software.

  the drivers are up-to-date (even if it is not updated on the web site of toshiba, and pilots were dated 2004)

  Anyone got directions on how to do it?

  I spent a day of evil and cannot do this work anyway for a non admin user, and must always start manually for work at all.

  Stephen

  Hello.

  I m unaware of this key WLan card because it s are not a product of Toshiba but
  I found a site with Inprocomm WLan drivers. Please check for this possibility.
  http://list.DriverGuide.com/list/company3145/

  Do you have accounts for different users on this device?
  I think that you need the appropriate permissions for all users.

  Good bye

• No Notification of the display of "caps lock we / off" on the screen

  Hello

  I have windows 7 ultimate (32 bit) installed, Dell Inspiron 14 laptop model R N4010, OS is the processor intel core i3.

  I can't see an indication of caps lock... so very difficult to know if its on or off.

  Help, please!

  Hello

  This option is not there by default, for LOCKING of UPPER icon in the Notification area, you may need to install the keyboard software from the manufacturer of your laptop / desktop.

  Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  So, for better assistance, I suggest you to contact the manufacturer of the system.

  You can post your query to the Dell forum for assistance:

  http://en.community.Dell.com/

• Caps lock key and its associated

  Any way to associate a sound to hit the SHIFT key?  How many times have you accidentally hit that caps lock key only lines of discovery 2 later that it was a mistake?

  Thank you

  You can go to control panel, accessibility, make the keyboard easier to use. Check the turn on the ToggleKeys. You will hear a beep when you press SHIFT CAPS LOCK, Numlock or SCROLLLOCK.
  
  --

  Dustin Harper
  E-mail address is removed from the privacy *.
  http://www.mstechpages.com  Microsoft News, support, FAQ, and much more!

  "ldb55066" wrote in message News: dd4900df-c362-4010-9 d 67-d8068466de96...

  Any way to associate a sound to hit the SHIFT key?  How many times have you accidentally hit that caps lock key only lines of discovery 2 later that it was a mistake?

  Thank you

  Dustin Harper * address email is removed from the privacy * http://www.mstechpages.com---aide Windows and Support Page

• Types of keyboard uppercase with CAPS lock OFF and vice versa - with laptop and same and external keyboard the on-screen keyboard

  During the night, something happened to the way that Windows 8 reads at the entrance to the keyboard.  It doesn't matter if I use the laptop keyboard, external wireless keyboard or pop-up on-screen keyboard, the results are the same.

  If SHIFT CAPS LOCK is DISABLED, the entrance presents itself as CAPS.

  If SHIFT CAPS LOCK is enabled, the entry is lowercase

  Regardless of the status of CAPS, entered numberic is impossible, either from the top row of keys OR number pad (with NumLock on or off).

  It is therefore impossible to connect to the computer as the password there.

  The laptop is an ASUS (sorry, don't know not the model and it's home now while I'm at work), bought in the last 2 months.  Everything worked great yesterday.

  Any help is greatly appreciated!

  Fixed!  Here is the solution:

  "By pressing the right SHIFT key for 8 seconds in the word 2003is filters a shortcut keys. When you click Cancel if it changes the configuration of the keyboard. When you press a letter key you will get capital, even if you don't have a behaviour the key to the capital. When you press a number key, you will get the symbol above the key as if you had hit the SHIFT key with her.

  To correct this problem and return to the normal mode by default words

  Press the two SHIFT KEYS at the same time. This will cancel the change in the configuration of the keyboard.

  To cancel the shortcut key shift so that this problem does not happen

  * Hold DOWN SHIFT RIGHT for 8 seconds to appear popup filter keys

  * Click on SETTINGS

  * On the keyboard tab go to filter keys and click SETTINGS

  * Under click on shortcut key on the box USING the SHORTCUT to remove

  brand

  * Click OK

  * At the bottom of the Accessibility Options box, click APPLY, then OK.

  * Press the two shift KEYS to disable changes.

  Keyboard should now return to normal mode and if you hold down the SHIFT key for 8 seconds or more, you should never have this problem again. »

  http://answers.microsoft.com/en-us/office/forum/office_2003-word/how-to-turn-of-shift-key-from-activating-filterkey/718a88f3-2f75-4b11-9cbf-236f0b80a72f?msgId=22a93d80-9c76-419f-a25d-467ceb87ecc3&tm=1365534268087

• Sat Pro L10 - its two continuous tone unusual

  My L10 Pro Sat has begun to emit a two-tone sound. This continues when the speakers are turned off, and even when all sources of energy are removed (sector and battery). Any ideas what is cuasing that and how can I stop it.

  Hello

  I am very interested about your case, but I really don t understand you not at all. Two tone without feeding sounds. It's very strange. I guess that your unit is fairly new and the warranty is still valid.

  On this path, it is really not easy to give you some explanations. In my opinion, you should contact Asp and they should check the device.

• Sat Pro L10... Do I have wireless or not?

  Hi, I have a satellite L10 pro with Mr. centrino processor all software configfree that came with my laptop. I have the button switch on the front that get out me of my screensaver when you press on, but it won't activate m wireless? I know that only some models are equipped with wireless and I bought it thinking it was. do I need any other, a network card or should it be installed? Please help if anyone has a solution to the problem of HRT, thank you

  Hello Karin

  Each unit of WiFi has WiFi label in the lower corner. I put t know what L10 you have, but please check if the wireless adapter is listed in the device under network adapters Manager.
  Wireless network card is listed there?

• Sat Pro L10: LCD screen and market off button / stop

  Ive had my L10, little more than a week and im having problems with the on off button does not turn on the laptop properly, so I need to keep it easy on and outside. After awhile, it will load up finally. However now wen it starts after about 5 minutes the laptop just freezes. You know the segestions

  Hello

  problems with start-up the machine always indicates a hardware failure. So you should take it to the service to be fixed.

  Good bye

• Sat Pro L10: WXP does not start correctly

  With a few computer startup problems. Screen loads but does not load the widows "xp" logo. So, I went with a balnk screen and no computer activity. Can you help me?
  S

  Hello!

  It can be:
  1. some Windows XP system files are damaged (it looks like explorer.exe)
  2. the machine has probably a virus.

  Suggestion: it is possible to reinstall OS (Windows XP)