Email scanned image 1536dnf MFP

Similar Questions

• HP MFP M277 dw: scanned image is not horizontal

  Hello

  I have problems with scanning.

  The scanned image is not right, not horizontal, the image / lines slightly tilting. The right of a line that is slightly below the line on the left. Looks like the book was a little twisted, but it's not. The left and right margins are straight and vertical, but the lines is tilted slightly.

  This occurs regardless whether I put the paper on the glass or using the paper feeder.

  My MFP is almost new, and this problem has happened all the time.

  / Paul

  @Paul_Sund

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you have not already done so, try setting "Calibrate" to help improve performance.

  The User Guideexplains the procedure on Page 121

  Calibrate the product in order to harmonize colors
  Calibration is a function of product that optimizes print quality.
  Follow these steps to solve the problems of quality of printing such as misaligned color, shadows, fuzzy graphics or other color print quality problems.
  1. on the product control panel, press the Setup button.

  2. open the following menus:
  ● System Configuration
  ● print quality
  Color calibration ●
  ● Calibrate now

  3. a calibration message appears on the control panel of the product. The calibration process takes a few minutes to complete. Do not turn off the product until the end of the calibration process.

  4 wait until the product is calibrated and then try to print again.

  

  If nothing helps, I suggest that you contact HP Support.

  Explain the problem and ask for options / help.

  HP Contact Information - sales, Technical Support, other Contacts - USA / Canada

  Fill out the form to receive the case number and Contact information

  Contact HP support - USA-

  Contact HP - including UK information

  HP technical support / Service delivery - some English Speaking countries

  HP global support

  Warranty check

  HP customer support - product warranty check

  Plans of optional guarantees:

  Enter your product number in the screen to view the different warranty plans available for this system:

  Care Pack Central

  Definitions (file may be slow to load in Firefox - Edge is faster...):

  Definitions of Care Pack Services

  HP Services to consumers (Service purchase information)

  1-866-724-8600

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• [Solved] Only software of HP Laserjet 1536dnf MFP

  [EDIT] The problem is resolved. My uncle asked someone to solve the problem. It has removed a plus printer related additional file. Unfortunately, I don't have the name. After that, that he has downloaded all-in-one file and printer correctly installed. Sorry for the inconvenience.

  Hello

  My uncle has Win 7 Ultimate, 64-bit (updated to the latest windows updates)

  installed via bootcamp on iMac

  HP 1536dnf MFP printer be installed via USB. No other HP product is installed.

  I had problems I've managed to solve.

  Problems:

  Earlier, the window 'Properties' flashed and closed immediately. I couldn't solve the problem even after trying the solutions offered in the messages earlier. After installation, my installer would fail as he won 99%. Even if I killed the install via the Task Manager, still I could not find a solution. HP toolbox FX could not be installed.

  As usual, I removed all the HP driver enteries of

  • services tab,
  • Device Manager and
  • somewhere in "printers and devices" (afte rclicking / select any printer on the top bar, there is an option to select the driver).
  • I also removed HP record form "programs x 86"(mon système est en 64bits). "» In the folder programs, I found nothing.
  • I also checked for universal printer is uninstalled and
  • sprooler printing works and is set to automatic.

  I had also updated the firmware to the latest version of 2014.

  1536dnf always failed Windows Update.

  I run the latest al-one installer of HP (210 MB)

  All-in-one installer...

  With the windows installer install also installs software. I clicked on the taskbar icon to see the details. He seeks the latest scan drivers, printing, etc. on the net and then installs it.

  After the installer HP 26 to 29%, seeks 1536 printer driver (we see on the screen to install windows). When the installation program has reached 29%, it is said

  Failed installation. Messege is something like

  Installation of HP Laserjet 1536dnf failure.

  I kept the installer running. After reaching 99%, it crashes. After a few minutes, it shows a fatal error. I ended up installing through the conversation Manager, the software is still not install.

  HP diagnostic tool identifies the printer, but said, software is not installed and indicates the downloads page, which is not the MFP from HP 1536dnf.

  There is a solution, I've not tried. A post said to create a new user.

  Half of the Solution:

  Then I tried to print base settings and scan driver PCL 6 without the first installation of software (which is later available on the version of the site 2011 HP) and... it worked. Now I can print and open for the tab of properties of the he.

  Note also that this is a "universal Printer driver'--> all suggested this universal printer and cause print spooler problems

  It works very well, but without the software that I can't scan. I do not use photoshop.

  Question:

  My question is

  210 mb Setup will still install the drivers. What will happen as in this case, I have already installed the drivers and work fine, but as mentioned, I can't scan. Scanning software HP gives good options.

  Is there a version available where only the software is installed and no driver is installed.

  Since 210 mb all-in-one installer always hangs at 99% (downloaded 2 times and installed 7 - 8 times), I might try basic installer.

  What will happen to the pre-installed drivers?

  The problem is that driver a universal printer PCL 6

  I will again be my uncle on Saturday.

  Please help me. Thank you.

  Kind regards

  White Lotus (WL)

  [EDIT] The problem is resolved. My uncle asked someone to solve the problem. It has removed a plus printer related additional file. Unfortunately, I don't have the name. After that, that he has downloaded all-in-one file and printer correctly installed. Sorry for the inconvenience.

• Unwanted fax confirmation pages for faxes received on HP LaserJet 1536dnf MFP

  I would like to disable the confirmation pages for faxes received on my HP LaserJet 1536dnf MFP but keep the pages of confirmation for faxes sent. How can I do this?

  It is not too difficult.  Press Fax Menu button.  Tap the right arrow until that fax reports is on display (should be the first thing that pops up), then tap OK.  Press the right arrow until Fax of Confirmation is displayed (again, it should be the first thing that pops up) and press OK.  Press the right arrow until you see Send Fax only and press OK.  Now you should be set to get reports of confirmation only when sending.  Hope that helps.

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• Preview of the scanned image is good but once saved image is black with horizontal lines

  My OS is: OSX 10.9.3

  I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.

  Print is good.

  Copy is good.

  But now I have some analysis of the issues, probably due to an update of the OS.

  Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.

  I rumaged through the forums and you have not yet found a solution to my specific machine.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  Scan using the software provided as Capture of Image or preview.

  The application of scanning HP for your printer is not available to 10.9, you use incompatible software.

  Follow these steps to get the results of the analysis required:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• HP 6510 - areas shaded on scanned images

  When I scan an image or document using a HP 6510 scanned images are dark and shaded areas along the vertical edges of the completed scans. The cover is closed all the way and the shadows are not part of the original image/document. What could cause this problem and how to fix it?

  I have scanned hundreds of images with a C5280 printer/scanner and never had any problems with it. Since I bought the 6510, I didn't have problems with it, it's a true lemon IMO. Does anyone know if HP is planning a recall on this model?

  Resolved: The problem proved to be the scanner cover. It allows a small amount of light to enter along the edge of the hinge. After you verify that the lid has been correctly installed (tabs of hinge in place and the lid placed correctly in addition to glass) I found that putting something, like a book or my hand on top of the lid while the machine is scanning has solved the problem.
  
  I miss my old HP Photosmart C5280.

• Photosmart 7515 adds lines from bottom of the scanned image

  My photosmart 7515 started just add a line double about 2 inches from the left edge of all of the scanned images. NO modification of the system that I am aware. Prins computer or internet as usual. Any ideas?

  Hi Bobvan1,

  Welcome to the Forums of HP Support! I see when you scan with your HP Photosmart 7515 he started to add a double line about 2 inches from the left edge.

  I would like that you start here: vertical, lines or streaks in the Copies or Scans, please fill ALL troubleshooting steps, focusing on cleaning.

  Let me know the results, I'll watch for your reply.

  Thank you

• Part of the image appears in the scanned image

  I have an officejet 6600 all-in-one printer.  Lately, whenever I try to scan the image is cut off.  Only a small part of the document appears in the final image.  The content is visible on the scanned image is in the lower right of the scanning space.  Please tell us what the steps should I take to solve this problem.  Thank you

  Hello Pierre,

  Welcome to the Forums of HP Support!

  I see you are trying to scan documents using your HP Officejet 6600, how ever you getting only a very small part of the analysis. What happens when you try to make a copy, the entire page produce on the copy?

  If the HP software, make sure that the scan size is set to sweep the area.

• i MAC mid 2011: error saving a scanned image by choosing Documents with text... the drop-down list of Preset MAC

  When I scan a text document and try to save it as a PDF, I get the error message "could not save scanned image.

  If I use parameters for general use, it records OK.  Any thoughts?

  Hello

  HP Easy Scan provides not less features HP Scan, this is a later version of the software.

  It provides the same functionality, such as capabilities, OCR, Image detection, scanning front panel and other capablities supplied by HP Scan.

  You can also install more HP Scan and test it, the current application will remain on your Mac.

• line on scanned image

  I have an Officejet 6500 has more all-in-one. The machine works fine except for one question.

  When you are scanning from the document feeder only, all scanned images leave a thin black line running vertically down the page, exactly 1 inch from the right side. If the same page is analyzed by putting it on the flat, no line appears.

  Just to confirm, is this normal? And if not, what is the solution?

  Art

  Could not resolve the problem after the documents you pointed me to

  Called HP support

  The problem has been resolved by unplugging the printer/scanner to the surge protector power bar and plug directly into the wall outlet

  Very strange, but he has apparently solved the problem

  Art

• HP LaserJet 1536dnf Mfp: HP Laserjet 1536dnf MFP - print problem printer

  My office has a printer HP LaserJet 1536dnf MFP printer and copy machine and it's only last month a year.  This morning the computer was printing and copy fine, then in the middle of a print job 21 page pages begins to show the 4 brands of blackshadow - like on the right side of the page (starting at the top and down to about 4 inches before printing the next black shadow).  Sometimes copying and printing.  I tried to reset the printer by unplugging the power for 10 minutes.  I tried to clean it with cleaning setting.  So far, nothing has worked.

  Greetings;

  If you could post a small picture of the question I might better be able to determine the cause.

  Are marks on the page dashes in the media?

  Brands repeat down the page in a spaced identical schema?

  The issue might have to do with the toner drum, but could be a piece of paper stuck on the fuser unit.

  Unlike the intervention of Anonymous_Fan this is not a model of injket and has no heads printing or alignment of the calibrations.

  I followed this thread and waiting for your response.

  Kind regards

  Jaclyn

• I continue to receive emails with images that do not appear?

  Hello

  I continue to receive emails with images that do not display, simply to show a Red Cross in the top left box from where the image should appear. I can download that will automatically open these emails?

  At soon AL

  Since it is a XP forum... I'm guessing that you are running Outlook Express?

  The following steps may be worth a try...

  Open Outlook Express and go to...

  Tools / Options / Security tab.

  Clear (clear) the box "block images and other external content in HTML e-mail" / apply / OK

  Also on the reading tab... Make sure that "Read all messages in plain text" is not checked.

• Photosmart All In One C410: Unable to save the scanned images

  I have a Mac with 10.11.1 and a HP c410 printer/Scanner.

  I can scan to the computer, but when I try to save in file I get the error message

  "Could not save the scanned images.

  It is the first time that I scanned because I upgraded to El Capitan, and I see that the scanner instructions have changed.  I can send the page scanned to the printer, but I can't save file so I can send by e-mail.

  Hello

  What application you scan currently?

  Can you save successfully scan using the HP Easy Scan application below?

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

• HP ENVY 4500: Scanned image appears in several parts of the whole.

  Hi people, for convenience, I'm going to number paragraphs describing my problem.

  1. any new product, which was to install a couple of days.

  2. the product prints and copy great and no problems. However, although yesterday I scanned a picture OK, now not so much.

  3. I hate to admit it, but I am 81 and my memory is not so great. Perhaps, I do not use the Protocol? Here are the details of the problem:

  4. when I scan using the screen of the printer the printer allows to scan that a good connection to my computer and an appropriate message is displayed on the monitor screen "Scanning". When parsing the result image is sent to the 'Documents '. So far, good.

  5. what analyzes all the I go to Documents and find the split image in ten 10 or more separate items and it would be a major task using PES or similar to the room together. In any case, would not be a solution, the photo scanning in a room, that's what I'm aiming for.

  6 but it is not the end of the problem. When I scan using the computer all scans correctly and is displayed in the preview window, which appeared on my screen. But the 'same' problem persists as above and the scanned image in appear in 10 or more parts at all.

  7. I don't think that there is nothing wrong with the product, rather I strongly suspect that I'm doing something wrong or maybe I misconfigured Setup.

  How can I fix this problem? What should I do to scan photos and documents as an image or a document and not 10?

  I'll be very grateful to help on this problem. Thank you very much. If you need more information, please just ask.

  Stehkoyeh.

  What follows is HPENVY4500 all_in_one printer, scanner, copier and fax. Professor, thank you very much for your help. However, I managed to fix my situation with the changes as follows:

  1. in the hp/scan utility on the computer. I clicked on the Scan of the computer and then the change analysis tasks...

  2. This was brought up in a popup window. I then put 'photo jpeg' highlight and click on modify.

  3. This brought another window. This is the important part. I've changed the menu presets "Photos, graphics, etc." and then that immediately under this Type 'exit' I've changed to read JPEG.

  4. everything that sounds very complex and I know I got lucky to fall on this procedure, because I'm good technically not for sure!

  However, the procedure above fixed my problem and my scans to and from the computer using Direct and wireless network were quite normal and very good. The scans are clear and bright and crisp colors. I am now very happy.

  As for the solution "self-cultivation", I'll certainly store that is far away and use it if you need. Although it was not necessary for my problem now, it's a very important protocol worth remembering.