Whenever I use the computer, I get the message "install new updates"

Similar Questions

• whenever I restart my computer, I get a message that says ASUS Express Gate Installation was incomplete, not sure what that means?

  I recently bought a computer is restored to nine that I has a 232 GB HDD (which was my drive c :) in it, so I had technicians install my 500 GB HDD (this is my f) also for the extra space.)  I now have the computer startup problems and when I was finally able to she is trying to load my f as my c: drive and I don't know what happened.  Also whenever I restart my computer, I get a message that says ASUS Express Gate Installation was incomplete, not sure what that means?  can someone help me?

  Original title: hard drives

  ASUS Express Gate installation to install Express Gate on your computer mount the DVD media into the optical drive. The drivers tab is displayed if your computer has enabled the Autorun feature. . 2. click on the utilities, tab, then on ASUS Express Gate Installer.3.Select the installation language and click. Ok. 4. the InstallShield Wizard for Express Gate appears. Click next to continue. 5. Select the disk volume target for you to install Express Gate. If you have several volumes and operating system installed on your hard drive, it is recommended to install Express Gate on Volume C click next to continue. 6 follow the instructions on the screen to complete the installation. Partition drive letter can someone have assigned wrong Solution of dough will be if you have Windows disk installation and reinstall windows on the Page of the score make Partition

• Whenever I open my computer I get this message: "explorer.exe has stopped working".

  original title: explorer.exe has stopped working

  whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.

  Hello

  The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  
  Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx

  Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx I don't have Kodak on my computer and I typed Kodak in the search above Start section and checked my programs.

  How do I get this off of my computer?  Any suggestions appreciated woul

  I typed Kodak in search above to start section and checked my programs.

  Instead do with msinfo32.exe to open system information.   Then, in the Environment\Startup software do a find, category searches only for Kodak

  Even better would be to use AutoRuns (utility system available on TechNet).

  HTH

  Robert Aldwinckle
  ---

• Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. »

  Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. "How can I fix it?

  Since my answer does not resolve your problem, please do not mark it as the answer.  I would like to deselect you.  Thank you.

  Try a clean boot of your PC and see if the error persists. Exactly how is determined by your version of WIndows and so far you have not updated this thread to let know us what version of Windows you are using.  Do now.  Click on modify under your original message and change the drop-down windows to indicate your version of Windows.

  You can also see items here: http://support.microsoft.com/search/default.aspx?mode=a&query=perform+a+clean+boot&spid=global&catalog=LCID%3D1033&1033comm=1&ast=25&ast=28&ast=30&ast=31&res=10

• Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". »

  Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". "for my external drives.  I use these daily backup USB drives. It seems that the backup will run, if I acknowledge this message by clicking OK. If this is not the case - it won't. Why is that happening and how can I solve this problem?

  You can repair the associations used to readers.  One of my fellow MVPS, Shawn (no relationship lol) has default binding settings in his site here:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Just scroll down to find the link of 'reader', click it, and launches the link.  You can do the same thing with "folder" and "directory" to be thorough.

• I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

  Hello

  I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Whenever I use my computer, the Windows Media Center screen opens constantly throughout any program, how can I stop this?

  Whenever I use my computer, the Windows Media Center screen opens constantly throughout any program, how can I stop this? I have istsalled game AllShare on my mobile device and the computer. It seems that I started having these problems at the same time, I installed it, but I could be wrong, because I was working on several things. Help, please!

  you say that when you open any program, Media Center opens instead OR are
  you say you can open programs, but Media Center appears in these
  programs. These are two different issues.  Have you tried a system restore to a
  point before your installed this program "Allshare" to see if the problem stops?
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. »

  Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.

  original title: compaction of the database messages

  Hi Kathy,

  Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.

  Mike

• When I start my computer I get a message that says that the file < root windows > \system32\hal.dll. is damaged or missing.

  file HAL.dll

  When I start my computer I get a message that says that the file \system32\hal.dll. is damaged or missing. Please reinstall a copy of the file. I have the original Windows XP CD and I tried to re - install, but it will not go beyond the implementation of window. I can't sign in to windows. How can I reintall this file?

  It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose?  It depends on your hardware, but it is extremely likely that the problem (did I already say that?).  I've never had to replace a file hal.dll for this problem.

  The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted.

  For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top.

  If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too.

  You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go.

  For example, method 1 will not work if your system does not start.  You may have more luck with other "methods".

  If that doesn't work, then I suggest to provide a little more information about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• When I boot computer I get this message... Remove the c:/System Volume Information directory. EFaDATA\SYMEFA. DB-log is corrupted and unreadable

  Original title: damaged and unreadable

  When I boot computer I get this message... Remove the c:/System Volume Information directory. EFaDATA\SYMEFA. DB-Journal is damaged and unreadable... How to fix this?

  Thank you very much for your help.
  I discovered the new external hard drive was the problem. Formatted as NTFS seems to be a problem so I reformatted to FAT and the problem disappeared.
  The error message was: the journal of System Volume Information EfaData SYMFA DB file or directory is corrupted and unreadable.

  Thanks again.

• whenever I use the crop tool, lightroom crashes and I have to restart. I'm using Lightroom CC 2015

  Whenever I use the crop tool, lightroom crashes and I have to restart. IM using a PC, with Lightroom CC 2015

  Hi Egorbey,

  If the solution above Tanuj helps, you can read the troubleshooting section of this document for additional ideas and possible solutions in the long term:

  Adobe Lightroom GPU troubleshooting and FAQ

  In particular, consider trying to update your graphics drivers.

  Mike

• Why do I reactive CS6 whenever I use the program?

  Why should I reactive CS6 whenever I use the program?

  Hi matiasp27326841,

  You suggest to refer to this article and make sure that you don't have the proxy settings or Adobe in the hosts file:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Kind regards

  Claes

• A cleaner PC interrupts my programs whenever I use my computer

  Original title: network adapter wireless network Ethernet NIC device

  PC cleaners interrupted my programs whenever I use my computer... they are not wanted, nor have they been invited to. How can that I get RID of them?

  Please advice Me.

  Hello

  PC Cleaner and PC Cleaner Pro are malicious software and must be eliminated.

  How to remove PC Cleaner<- check="" the="" removal="" methods="" here="" however="" be="" aware="">
  malicious software can turn so it's maybe not accurate.
  http://www.ehow.com/how_5003975_remove-PC-cleaner.html

  PCclean - also check the methods of hair removal here
  http://www.Symantec.com/security_response/writeup.jsp?docid=2008-032714-2234-99&tabid=2

  --------------------------------------------------------------------------------------------------------------------------

  This tool troubleshooting for Windows 7 - Vista is very similar - use XP RUN instead of start.
  Search

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Whenever I start my computer, I get a statement that Windows Defender cannot be started due to error code - 0x8001066ba

  Whenever I start my computer, I get a statement that Windows Defender cannot be started due to error code and I can not start it manually by the same error code. How can I solve this problem?

  Hello

  What is display / causing the error message? Some security/antivirus/antispyware products can cause this
  error. On those which do you use, including everything that you have ever even those uninstalled (remainders
  may cause problems). AVG and others have been known to disable Windows Defender.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.