Using the grid

Similar Questions

• I just bought a 6 d. is it possible to use the grid in other than the auto mode?

  I just buy a 6 d.  Is it possible to use the grid in other than the auto mode?  Also, is there a way to use the self-timer in other than the auto mode?

  Thank you very much. I look forward to your comments.

  I have to assume that your camera came with a manual you need to rely on. In my manual for my 7 d Mark 2 the index near the end of the manual lists the applicapable pages for whatever this is relating to the use or other people. Grid is under G, Self Timer is under S and called "self-timer."

  If you use a computer based pdf to see the info it will probably be several pages listed, but you can click on a page number to get to it rather than scroll to it.

• using the grid to form 10 g or 11 g

  Hello
  
  any body can help me to know how use the grid in form 10 or 11 g?

  Perhaps this Java Bean

  François

• Everyone has put in place a responsive BC catalog using the grid of Foundation block

  I put the list of products to li, but I still can't get it to work. I looked at a few models of electronic trade of BC with the Foundation, but they don't seem to be using the block grid.

  I spent hours on this subject and I'm starting to think that it is not possible.

  Additional classes of BC 'productList and productSmall' there are stop working. There must be a way around it?

  < div class = "row" >

  < div class = "big-12 columns newCushions" >

  < ul class = "big-block-grid-3 way-block-grid-2 small-block-grid-1" >

  < ul class = "productList productSmall" >

  < id li =... >

  < a href =... >

  < img... / >

  < /a >

  < /li >

  < /ul >

  < /ul >

  < / div >

  < / div >

  I use the normal grid for my eCommerce page layouts.

  While not the best, you could use jQuery to add the class where you would like:

  It may be possible with the liquid to do, but I'm not sure about that.

• When using the grid of fluid in dreamweaver 6

  When you upload your site using the fluid in Dreamweaver 6 grid, if someone using a phone, tablet or desktop, made fluid grid design sight reconzize if a person uses a phone, tablet or desktop? Do we have to insert the code so that it can recognize this device is used to surf on the view?

  Thank you

  Yes, it is the work of "media queries" who writes your CSS Grid of fluid. It will seek the resolution of the screen of the user and the re - set to scale and display IE desktop / mobile / phone view to them. You don't have to worry about any code written for her.

• using the grid without CARS

  How can I get the grid without CARS. ??
  
  
  I want to do a grid of one of our serveres but we dnt want to use RAC so, how can I use gridb w/o CARS?

  Salvation;

  What is your purpose? If you use ASM you need install the grid and you don't need to have cars

  Respect of
  HELIOS

• Using the Grid control with the ALLOWED_LOGON_VERSION parameter

  Hello
  
  We use a 10.2.0.4 database and a 10.1.2.3.0 grid control (with its own 10.2.0.4 database) and WHO and the database are patched up to April 2010 CPU. We tried setting the SQLNET. ALLOWED_LOGON_VERSION = 10 in the SQLNET.ora of the database, but it seems as if the control grid or the agent cannot connect to the database. This is the error that we received from the grid if the parameter is active.
  ORA-28040: no authentication protocol matching (DBD ERROR: OCISessionBegin).
  
  I found no information on activate or not the ALLOWED_LOGON_VERSION if a grid control is followed by a database.
  
  Someone had this problem before?
  
  Thank you
  Francis

  Francis,
  I googled on "SQLNET. ALLOWED_LOGON_VERSION = 10 ". This leads me to SQLNET. ALLOWED_LOGON_VERSION here is a description of the bug 6051243. Seaching on My Oracle support for this bug led me to the notes 466939. Looks like you're running in this bug.
  Note 755605.1 gives you some solutions.

  Eric

• the stream using the grid 10.2 control configuration

  can configure us the flow through the grid control 10.2? Please let me know the step by step workflow configuration.
  
  Thank you.

  Grid control has a wizard that allows you to configure the table, a schema or database replication complete. You can use the wizard to generate a script for the configuration, ask well. There are some resources available online covering the wizard of replication and monitoring of streams in general with EM.

  For example, there is an annotated presentation (Grid Control 10.2.0.5: workflow management) which describes the pages EM streams and how to use them. Link: http://download.oracle.com/docs/cd/E11882_01/server.112/e10703/tdpii_repcont.htm

  There is also an Oracle by example (OBE) demonstrating 11.2 management DBControl Brooks walking through the wizard configuration and replication and monitoring. Link: http://http//www.oracle.com/technology/obe/demos/11gr2/streams11_2/streams_and_em/streams_and_em_viewlet_swf.html

  11.2 2 Day + data replication and integration book (Chapter 4) also includes a tour through the pages of stream DBControl 11.2. Link: http://download.oracle.com/docs/cd/E11882_01/server.112/e10703/tdpii_repcont.htm#BABEFAFI

  Published by: pmcelroy on March 30, 2010 19:45

• Planning of a work of export using the Grid control

  Hello
  
  I had an obligation to schedule tasks for export in Oracle Grid Control 10.2.0.5 (Windows). Is this possible and have each done this? If so, please share the steps. The idea is to receive alerts when a job fails.
  
  Thank you.
  GB

  Here are the easy steps (there could be some slight differences as I'm posting screen of 11 g-based)

  1. the grid control console, click on the relevant database

  2. click on the tab "Data Movement.

  3. click on "export to export the files.

  4A chose the export type (Database / Schema / table / Tablespace)

  5. provide credentials to the host (OS user name and password) and click on "continue". You will get a new screen called ' export: Options

  6. click on the box called 'Generate a log file', and then select the directory object where you want to create the dump files. (You must create a database directory object, if you do not)

  7. choose the option that you required the content, then click on ' * following *'. You will get a page called ' export: files

  8. Select the directory object in the drop-down list and provide a name of filename format and click on "next".

  9. here provide you the job name and description, and chose repeat options (daily, weekly, etc.) and click "next".

  10. you will get a summary screen called ' export: Annex "." Review the details of your job and click 'submit '.

  It's the solution, and it works well.

• EN the error using the grid java.rmi.UnmarshalException

  Hello

  
  

  I started using Hyperion Financial Reporting on the remote machine and now I installed it on my machine.

  Everything was ok during the installation process. Then I tried to create a new report with a new grid. When I click on the button, EN gives me the following error:

  
  

  ********

  
  

  ; nested exception is:

  java.rmi.UnmarshalException: error demarshalling return; nested exception is:

  java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; incompatible local class: stream classdesc serialVersionUID =-1288366423950156093, local class serialVersionUID =-5245705824007679661

  ********

  Can someone explain to me what I can do to fix this error?

  In my experiences, it gives me this error when a report have a grid or when I try to create a.

  It is perhaps at a level different patch, EN can be sometimes not work so well when the client and server versions do not match.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• We cannot pull a script using the grid control?

  Hi all
  II need a script for the table and the indexex which is present in the database.
  Is it possible to remove a script for this purpose in gridcontrol?
  
  Thank you

  In the console...

  1. go on the homepage of the database
  2. in the tab "schema".
  3. on the link of the table or index
  4. connect to the database
  5. Select the schema
  6. Select the table or index
  7. in the drop action, select 'generate the ddl' and click 'go '.

  Best regards
  Robert

• Why use Oracle Grid in the oracle database

  Hi experts,

  In fact in my workplace, we use normal database (use not the grid). I want to know why we use the grid in the oracle database. all that the advantage of it.

  Reg,

  Thomas

  You might have a grid of database servers (access to the shared storage) or application servers.

  You can use the Grid control to monitor and manage multiple database / application servers.

  10g and 11g and 12 c facilities grid Infrastructure is installed to facilitate the DSO (is not part of the 10g GI) but a part of the 11 g and 12 c GI and Clustering.

  Then, depending on the context "grid" can refer to another product.

  Hemant K Collette

• How to keep the lines of the grid appear on each document as I open them? Can someone help me please?

  I hope someone can help me please.

  Whenever I open any document it opens with a grid set although the function of the grid is not checked. It closes as soon as I use Ctrl + H or close the function in the menu, but it reappears in the following document/picture etc. I use the grid a lot but have never experienced this before. It's very frustrating! It seems to me that there is a simple solution, button to press or setting to change, but turns suddenly so it feels more like a default any.

  Thank you in advance.

  Margaret

  HI Margaret

  CTRL h is short for "hide all", controlling the band guides of ants (selection) and its grid.  You must use the individual shortcut for the grid that is Ctrl ' (apostrophe).  CTRL; Activates / deactivates the Guides.

  Or you can do everything that precedes it in the view menu

  

• Massive update of the title in the display of the grid does not

  I am currently using Lightroom 5.6.  I used to be able to select multiple photos using the grid in the library module and change all the titles of the photos for the same title.  Now, this procedure doesn't seem to work.  It replaces the title of only the first photo in the selection.

  Please suggest a procedure to achieve this.

  Make sure that metadata > show metadata for goal Photo only is not checked.

• the variable name of database query to SQL Server using the Oracle database link

  Hi all
  
  I have an ApEx 4.1 application running on x 64 (11.2.0.1) 11g on Windows Server 2008 x 64, and I have a few points of data integration with SQL (2005 and 2008) server that I need to create. I have configured the database with dg4odbc link and it works perfectly... I can run queries on the SQL Server database without any problem using the database link.
  
  However, there is a scenario where the SQL Server database name is dynamic, and I need to generate on the fly in a PL/SQL block and then use it in a query dynamic SQL (all this in the ApEx). It of wherever I meet problems... when I asked the default database that is based on the ODBC connection and I don't have to specify the name of the database, no problem. But when I need access to one of the several other databases by default, I received the error "invalid table.
  
  It works well:* (note that 'fv' is the name of my database link)
  
  v_query1: = "select 'Release Date' from dbo." Schedules@FV where dbo. Annexes. "" SchedID "=: calendar";
  EXECUTE IMMEDIATE v_query1 in rel_date using the grid.
  
  
  
  
  I then take this rel_date variable, convert a varchar2 (rel_date_char), then use it as the name of the database in the following query...
  
  
  _ It returns an error(error ORA-00903: invalid table name)
  
  v_query2: = "select"PARTNO": rel_date_char.dbo.ProdDetails@fv where 'SchedID' =: calendar and"UnitID"=: unit"
  and 'MasterKey' =: master and "ParentKey" =: parent';
  
  EXECUTE IMMEDIATE v_query2 in part_number using planning, master, parent unit;
  
  
  
  I also tried using all of the following conditions without result:
  
  "select"PARTNO"of" | : rel_date_char | '.dbo. ProdDetails@fv where 'SchedID '...
  "select"PARTNO"of" | rel_date_char | '.dbo. ProdDetails@fv where 'SchedID '...
  "select"PARTNO"of" | @rel_date_char | '.dbo. ProdDetails@fv where 'SchedID '...
  "select"PARTNO"in @rel_date_char.dbo.ProdDetails @fv where 'SchedID'..."
  
  
  Is it possible to do it in PL/SQL?
  
  Thanks for any help!
  -Ian C.
  
  Published by: 946532 on July 15, 2012 19:45

  Just did a test using passthrough:

  SQL > set serveroutput on
  SQL > declare
  2 val varchar2 (100);
  3 c whole;
  4 whole nr;
  5. start
  c: 6 = dbms_hs_passthrough.open_cursor@FREETDS_DG4ODBC_EMGTW_11_2_0_3;
  7 dbms_hs_passthrough.parse@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c, "select count (*) from EMP");
  8 LOOP
  9 nr: = DBMS_Hs_Passthrough.fetch_row@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c);
  10 output when nr = 0;
  11 dbms_hs_passthrough.get_value@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c, 1, val);
  12 dbms_output.put_line (val);
  13 end of loop;
  14 dbms_hs_passthrough.close_cursor@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c);
  15 end;
  16.
  24576

  PL/SQL procedure successfully completed.

  SQL > declare
  2 val varchar2 (100);
  3 c whole;
  4 whole nr;
  5. start
  c: 6 = dbms_hs_passthrough.open_cursor@FREETDS_DG4ODBC_EMGTW_11_2_0_3;
  7 dbms_hs_passthrough.parse@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c, ' select count (*) from dbo.) EMP');
  8 LOOP
  9 nr: = DBMS_Hs_Passthrough.fetch_row@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c);
  10 output when nr = 0;
  11 dbms_hs_passthrough.get_value@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c, 1, val);
  12 dbms_output.put_line (val);
  13 end of loop;
  14 dbms_hs_passthrough.close_cursor@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c);
  15 end;
  16.
  24576

  PL/SQL procedure successfully completed.

  So all 3 ways work for me.

  Published by: kgronau on July 23, 2012 10:08

  Now, using the variables to make the selection:

  SQL > declare
  2 val varchar2 (100);
  3 c whole;
  4 whole nr;
  5 tabname varchar2 (20): = 'EMP ';
  6 ownr varchar2 (20): = "dbo."
  7 dbname varchar2 (20): = "door";
  Start 8
  c: 9 = dbms_hs_passthrough.open_cursor@FREETDS_DG4ODBC_EMGTW_11_2_0_3;
  10 dbms_hs_passthrough.parse@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c, ' SELECT count (*) FROM ': dbname: '.) ' || ownr | '.'|| tabname | ") ;
  11 LOOP
  12 nr: = DBMS_Hs_Passthrough.fetch_row@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c);
  13 when the exit nr = 0;
  14 dbms_hs_passthrough.get_value@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c, 1, val);
  15 dbms_output.put_line (val);
  16 end loop;
  17 dbms_hs_passthrough.close_cursor@FREETDS_DG4ODBC_EMGTW_11_2_0_3 (c);
  18 end;
  19.
  24576

  PL/SQL procedure successfully completed.

  => instead of executing the statement using the "execute Immediate" we use the PASTHROUGH package to pass the statement to SQL Server.

  Published by: kgronau on July 23, 2012 10:10