Using the monitor 2 on PC

Similar Questions

• When you use the monitor in Windows 7 feature, I can choose which is my primary monitor, laptop or external monitor?

  I have a laptop HP which I use with an external monitor as your desktop put in place. I have no problem with the standard choice working about the poster. However, I would like to than the main office (Start menu and shortcuts) to display on the monitor external and my laptop at the extended screen display. I came across ideas in the research of the object, but most of them is based on earlier versions of Windows and not Windows 7.

  I have a laptop HP which I use with an external monitor as your desktop put in place. I have no problem with the standard choice working about the poster. However, I would like to than the main office (Start menu and shortcuts) to display on the monitor external and my laptop at the extended screen display. I came across ideas in the research of the object, but most of them is based on earlier versions of Windows and not Windows 7.

  Hey English2Go

  Here is the vista forums

  Try the forum Office windows 7 the link below

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/threads?filter=AllTypes

  Walter, the time zone traveller

• "No signal not detected" when using the monitor.

  Original title: Second just conked monitor

  I have two LG monitors with a desktop Acer running Win7Pro: Monitor1 (M1) = W2253 Monitor 2 (M2) = 23MP65HQ. All of a sudden yesterday stopped M2 display. It is said 'No signal detected' and goes to sleep. In the devices list, it is displayed as generic PnP monitor. When I check the resolution of the screen, it shows M2 in a small gray square, but it is not identifiable or traceable.

  It is the monitor or the cable. When I unplug M1, M2 is functioning normally.  So it seems that I can't use the two together no more. Except for a little while after the blackout. I opened a program had been posted on M2 before the failure of current and for a short time while M2 has been reactivated, but with a bad resolution. When I tried to set the resolution, the screen went black again and has stay black since. The display resolution is a constant problem before that. Sometimes he'd lose the setting and I reach the screen resolution and to detect and it would be fixed - just not always. An occasional pain but is not debilitating.

  There were no cases leading up to black screen - except a Windows Update. I didn't do any cleaning, moving, or adjustment of any sort, no power bumps or other external event. He became all black while I was doing a regular job. This is my work computer and I'm the only person who uses it.

  Help?

  Click on the following link and check if it helps.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

• problems using two monitors. both screens show the same thing.

  I use the NVIDIA GeForce4 MX integrated graphics.  I need to use the monitors at the same time, but with a capacity for dragging from one monitor to the wire to the other.

  Hi Denise,

  See http://support.microsoft.com/kb/307873 to learn how to configure and use multiple monitors in Windows XP.

  To view the same desktop in multiple Monitors (Extending the displays)

  -In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to use in addition to your primary monitor.
  -Click to select the checkbox extend my desktop on this monitor . After enabling this feature, you can drag items across your screen on alternative screens. Or, you can resize a window to stretch it on several monitors.

  Hope this information helps.  Let us know if you have any questions.

• Qosmio G20-139: use the laptop screen to play on the Xbox 360

  Hi I have a question about the monitor function with the G20-139,

  I have an xbox 360 and would like to know if there is a way to use laptops screen to play on the 360 in high definition or composite mode using the monitor function. With the laptop came a composite cable at one end and a sort of headphone 3.5 mm at the other.

  I read the manual about the case and it does not work.

  Any help would be appreciated thanks

  Hello

  The port monitor - where you can connect with the composite cable can be used to display video from your digital camcorder, video game or VCR on the internal LCD screen. It can be used as a line-in port to allow the connection of a stereo device for audio input.

  In my opinion, you also need this cable to connect the Xbox to the Qosmio with composite cable plug-in software component.
  http://www.madcatz.com/default.asp?page=257&CategoryImg=Xbox_360_Cables

  Then to commence the Qosmio with the Monitor-in button that starts the Qosmio player.

  Good bye

• How to use the video port with Vista on Qosmio G30

  Im running windows vista Ultimate edition.
  How to use the monitor in port?

  The Composite (in the port monitor) port is placed to the right.
  With the video component cable software plug-in delivered a CATV or satellite box can be connected to the computer to watch channels.
  You can for example use the Qosmio Player or Windows Media Center to watch other channels.

  As much as I know the ultimate Vista supports Windows Media Center, Windows Media Center HDTV.
  You should read some more details on your new operating system!

• Qosmio G20: How to use port Monitor

  Hello!
  Regardless of explanation in the manual, I'm not sure to understand why and how to use the monitor to the port on the back of my G20. Everything I connect nothing happens.

  Any help appreciated.

  Hello

  You can use this port for displaying video from your digital camcorder or VCR on laptop screen you.
  In the user manual, you will find the detailed description of the devices on which you can log in and how to connect the device and the external device.
  If you n t understand the manual which is pre-installed on the unit you so you can download it in your language.

• recently to message this application memory is exhausted when I use the same applications as always before

  iMac running OS 10.9.5, suddenly getting alerts that my application memory is running out / has run out; I use the same applications that I used throughout and never had these alerts. I close all except an application but still get the message. This just started happening.

  HI there are Selia,

  Looks like you get this error message concerning the exhaustion of the memory of the application no matter how little you actually run. I would like to start by resetting your PRAM first:

  OS X El Capitan: reset PRAM your computer

  https://support.Apple.com/kb/PH21876?locale=en_US

  1. Choose the Apple menu > shut down.

  2. Look for the following keys on the keyboard: Option, command, P and r. you need to hold these keys down simultaneously in step 4.

  3. Turn on your Mac.

  4. Immediately press on and hold down the command-Option-r-P. You must press these keys until the black screen with the Apple logo to appear.

     Continue to hold the keys down until you restart your Mac, and you hear the tone of starting for the second time.

  5. Release the keys.

  After resetting the PRAM on your computer, you may need to update your speaker volume, screen resolution and startup disk preferences.

  Then test the question a bit. If it persists, I would then start mode safe so that the system can check for disk errors and clear a few caches of system level.

  OS X El Capitan: start in safe mode

  https://support.Apple.com/kb/PH21875?locale=en_US

  You can also use the activity monitor to see if there is a runaway process eating all your memory or put too much pressure on her:

  Use the monitor activity on your Mac.

  https://support.Apple.com/en-us/HT201464

  Thank you for using communities of Apple Support.

• Installation of the monitor three Lenovo E550?

  OK, so I have a Lenovo E550 and OneLink Pro Docking Station (the one with the RFP, and DVI Ports).

  So when I got to my laptop, I was able to connect successfully three external monitors to your laptop. 1 using the VGA Port on the side of the laptop and then using the DP and DVI ports. (I close my laptop and turn off the laptop screen). However this provoked touching every two seconds. I honestly didn't mind, because it is a work laptop and I do not have anything too serious on this subject.

  Now however I can't even use the VGA monitor if the onelink is attached. It will be either twinkle extremely fast, or just simply stay black. If I disconnect the Onelink however I use the monitor perfectly.

  I thought the solution would be to switch to the use of the HDMI Port, but it would seem that the HDMI Port is disabled when the OneLink is plugged in, because I don't get a signal on my HDMI Port when the OneLink is connected, if I disconnect the OneLink if my HDMI works perfectly well.

  So is there any way to get this configuration works correctly? I've updated all the drivers and firmware, I switched to a different E550, I swapped a different OneLink and a different charger for the OneLink and it seems that the problem persists through on everything.

  Thanks for any help!

  In response to customer relationships of flickering or flashing on external monitors connected to E550 laptop via VGA, a CUTTING-EDGE Service port was released.

  It can be found here: https://support.lenovo.com/us/en/documents/SF15-T0074

  Thank you

• Using two monitors (Windows XP) display configuration

  I spent more than an hour and can't seem to keep the settings I want.  Using Windows XP, I have two monitors side by side.  I want to use my right monitor as my primary monitor. I want to have the taskbar, my icons, when I open programs on the right.  I want to use the monitor on the left to drag items on multitasking or comparison to previous years.  I can get it all, but my mouse wants turns off the screen to the right on the monitor from left to right, left and right while what I would LIKE IT to do is to go back into the seam in the middle.  Right monitor on the monitor on the left goes to left... and going to the right through right to left monitor.  I can get the setting to do, but as soon as I restart the mouse wants to go "around the block" to join the other monitor again.  In the words of my monitors is on the left (2) and the right (1).  I chose the right monitor (1) be the primary monitor, so there the old dark blue box. Currently... Control Panel/display/settings I have the #2 raised on the left and #1 on the right slightly primary underneath.  I Mnitor Plug-and-Play with ATI Radeo HD 2400 PRO... and below the use this device as the primary monitor and extend my desktop on this monitor are selected and gray.  If I select the monitor #2 as being the accented monitor turns off light gray below and extend it my Windows desktop becomes the only one selected.  I tried many combinations... .and I want until I restart, even if I get ' application and press OK.  As soon as I restart the enjambment mouse stops and goes back "around the block" out there, anyone can tell me what I'm doing wrong?  It used to work fine until I got another problem and had a 'guru' get on remote.

  I can get the setting to do, but as soon as I restart the mouse wants to go "around the block" to join the other monitor again.  In the words of my monitors is on the left (2) and the right (1).  I chose the right monitor (1) be the primary monitor, so there the old dark blue box. Currently... Control Panel/display/settings I have the #2 raised on the left and #1 on the right slightly primary underneath.

  The key trick is to drag these two icons so that their order changes.

  I Mnitor Plug-and-Play with ATI Radeo HD 2400 PRO... and below the use this device as the primary monitor and extend my desktop on this monitor are selected and gray.  If I select the monitor #2 as being the accented monitor turns off light gray below and extend it my Windows desktop becomes the only one selected.

  ATI has a tool called Catylst Control Center, which can help.   I don't know if it is still available for such a product so.

  BTW this thread will be probably moved to a XP Hardware forum where you can get more informed help.  ;  )

  Good luck

  Robert Aldwinckle
  ---

• Data of the monitoring report: FSMService

  Hi all
  I have successfully build different services with the host group. I can see the details of the Service with the content engine virtual and everything seems fine. But when I now try to run a report using the monitoring: FSMService as a context parameter, for example the Module VMware Virtual Machines configuration report, I have all shown data if I use one of my construction services.
  If I use the build already in virtualization Service, it shows me all the VMS, but my goal was to report according to the accumulation of services with the Service constructor. Could this be something tha service accumulate shows machines (host)?
  Help, please.
  Kind regards
  hEINER
  SystemInfo: vFogLight 6.5 on Windows Server 2008 R2 64 bit

  Hello hEINER,.
  My suggestion would be to open a support case to diagnose the issue further.
  Concerning

• Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hi Sergior96769872,

  I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

  Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

  Connect and disconnect activate Cloud Creative applications

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

  If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  
  

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.

• T410 w / integrated graphics can support the RES Dell U2711 of 2560 x 1440 using the displayport?

  I wanted to buy the Dell U2711 that uses a resolution of 2560 x 1440.  I have a Lenovo T410 that uses the integrated Intel Graphics Media accelerator card.  I have a few questions:

  (1) can I use the monitor resolution 2560 x 1440 with this configuration of the laptop (connection via Displayport to Displayport adapter), if not, what is the maximum resolution I can use?

  (2) If Yes, can I use the Dell U2711 monitor plug and play or do I need to install drivers to use the maximum resolution (the T410 is a company computer and I can't install the drivers)?

  Also, while I'm asking, I have a T500 with a host of Ati. HD 3650 video card.  Can I connect to the monitor dell via adapter Displayport to Displayport to achieve this resolution?

  (1) Yes it can.

  (2) no driver, plug-and-play. Even if windows would give you a few drivers for monitor calibration, etc..

  (3) Yes, you can (all thinkpads with displayport can support this resolution, which is one of the reasons why Lenovo choose this over HDMI in their mobile phones of the company).

• I can connect new iMAC (A1418) on my Win10 to use the iMAC monitor?

  Can I connect my new iMAC (A1418) to my Win10 so the Win10 can use the iMAC monitor?

  Read the article to use your iMac as a display with the target - Apple Support Display Mode Apple. Apple described the iMacs will work. You will probably find that you get an external display to work with your Windows machine.

• How to use the activity monitor?

  Can I use the activity monitor active processes against a list of processes that are supposed to be here vs not and if so, can someone point me in the direction where the default process for comparison?

  You have a problem or if you are curious?  I think that etrecheck would be a better choice.  You could start your mac in safe mode to see what is typical.  There is a lot of process.  I have internet google with the name of the process.  is going to be a bit tedious for all 185 or let etrecheck aside.

  You can run etrecheck, by default, it leaves aside the common process of apple.

  Download etrecheck.  Click the link to download at the bottom of the screen.

  http://etrecheck.com/

  Seal of approval

  https://discussions.Apple.com/docs/doc-8181