Using the same application with filters prompted by guided Navigation

Similar Questions

• recently to message this application memory is exhausted when I use the same applications as always before

  iMac running OS 10.9.5, suddenly getting alerts that my application memory is running out / has run out; I use the same applications that I used throughout and never had these alerts. I close all except an application but still get the message. This just started happening.

  HI there are Selia,

  Looks like you get this error message concerning the exhaustion of the memory of the application no matter how little you actually run. I would like to start by resetting your PRAM first:

  OS X El Capitan: reset PRAM your computer

  https://support.Apple.com/kb/PH21876?locale=en_US

  1. Choose the Apple menu > shut down.

  2. Look for the following keys on the keyboard: Option, command, P and r. you need to hold these keys down simultaneously in step 4.

  3. Turn on your Mac.

  4. Immediately press on and hold down the command-Option-r-P. You must press these keys until the black screen with the Apple logo to appear.

     Continue to hold the keys down until you restart your Mac, and you hear the tone of starting for the second time.

  5. Release the keys.

  After resetting the PRAM on your computer, you may need to update your speaker volume, screen resolution and startup disk preferences.

  Then test the question a bit. If it persists, I would then start mode safe so that the system can check for disk errors and clear a few caches of system level.

  OS X El Capitan: start in safe mode

  https://support.Apple.com/kb/PH21875?locale=en_US

  You can also use the activity monitor to see if there is a runaway process eating all your memory or put too much pressure on her:

  Use the monitor activity on your Mac.

  https://support.Apple.com/en-us/HT201464

  Thank you for using communities of Apple Support.

• Win7 with FF 31, smart phone 4.2 with FF letest ver. using the same account with 1 email. But the phone is not getting any collar, Bokmr, etc.

  Brother.
  We use win7 with Mozila 31, 4.2 with Mozila Android smart phone latest google app store on 04/10/0214. Using the same account with the same email. But the phone does not get any new information of win7 with Mozila 31. PL z give useful information.

  Hi w3ur_team,
  Thank you for your question. I understand that there are two features that are documented in the sync account. However the Android is not synchronized.

  There are two places we can check:

  1. In the Android settings, under accounts is the Firefox Sync or Firefox Sync (discouraged) joint account?
  2. Credentials work on accounts.firefox.com on the mobile device and are there any error messages in the synchronization of the settings menu > sync?

  See also Firefox Sync troubleshooting and tips for more troubleshooting steps.

• To connect to vCenter using the same Session with PowerCLI

  Hi all

  Is it possible that we can establish multiple connections to vCenter using the same session with Powercli.

  As connect-viserver-Server "vcenter1" - domain\domainacnt of the username-password "Password".

  is to establish several connections and we want to limit, because we are in the process of report generation based on the web developing using Powercli with IIS.

  Please suggest.

  You can use the Session parameter on the cmdlet Connect-VIServer .

  I use this for the PowerShell Workflows, see workflow of PowerShell and PowerCLI

• using the same datamodel with SQL database QML in 2 listviews

  I am using the code for the sample application quotes as starting point. I try to call the same SQL database with the quote template to build a list in the top level of my application and then create a list to the next heirachy.
  For, for example, imagine a list of different types of quotes (funny, sad, happy, etc.) on the home page, then the list of people with their quotes on the 2nd level and their exact quote at the 3rd level. When I use the same quotesModel qml and asyncksource at the top of the list and yet once in 2nd list level I get disconnection issues connect to my SQL database. How would I fix this?

  You only need a data source class, but you will need multiple instances of it.

  The disconnect message means that the new connection is now that of the database of driving. Will there be other errors in the log?

• Why the temperature shows on my watch always different temperature on the watch of my husband when they use the same application?

  Why the temperature still showing on my watch shows a different temperature than on my husband watch when they both use the same weather app?

  Hi Jodie

  If you are each using the weather app (which is included in the framework of the iOS and watchOS), the following steps can help (followed by each of you):

  • On your iPhone, in the weather app:
    • If using anything other than the current location (which is included by default), make sure you have each added to a common location / city.
    • To add another location, select the icon «+»
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > weather > default City > make sure you have each selected at the same location (for example: place of current residence or Mount Laurel).
  • On your iPhone, go to: settings > privacy > location Services:
    • Ensure that the location service is enabled;
    • Make sure Apple Watch is face value while it helps;
    • Check that the weather is set to always;
  • On your iPhone, go to: settings > general > background App update:
    • Check that the bottom App Refresh is enabled.
    • It can also help to activate the setting for the weather.
  • For optimal performance of your watch, keep the Bluetooth and Wi - Fi enabled at all times on your iPhone:
    • iPhone: settings > Bluetooth - on.
    • iPhone: settings > Wi - Fi - on.

• I am asked to select an application every time I try to open a file that is linked through a Web site. How can I tell firefox to use the same application each time?

  I have a Web site; www.designed4submariners.com. on several pages, I created links to images that are found in a download folder. Whenever I click on one of these links on the current site (using Firefox as browser), a dialog box appears to ask: do the Firefox with this file? Under question is a drop-down menu that has "TextEdit (default)", selected next to an option button. The image file opens in a browser window when I select Firefox in this menu drop-down. I can't tell Firefox to open all similar files using Firefox. How can I solve this problem because I have to go through the same process every time that I try to open one of these links.

  no link to my knowledge. We know that win 7 request to associate a program every time u open a file online. I think that you need to configure Windows 7. im not an expert yet in win 7, but it is what im sure on many computers that freshly installed win7

• You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm c

  Hello

  You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm connected to the Internet and I don't have any active anti-virus software?

  Thank you

  No application of cc, no clouds. It's the simple truth here. Programs cannot operate without him, since he controls the installation and licensing. the rest, we do not know, since you have not provided any useful technical information. Start by reading this (yet?):

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  What also good technical details are necessary.

  Mylenium

• Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

  Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

  Yes, individual licenses, ranging up to allow two simultaneous, activations facilities.

  subscriptions allow mounting on an unlimited number of computers.  connection is limited to a maximum of two computers at a time.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Android APP and Native application using the same push record ID

  Hello

  We have an Android existing converted app we use for BB10 platform that we are in the process of gradually. Replace this app is an application of BB10 Native with the same name and features.

  My question is that I have to get a new record ID to push for the new Native application or can I use the existing production record ID?

  Ideally, I would like to migrate my users off the coast of the old version of the application to the new with the least problems for customers.

  Thank you

  Andrew

  You should be able to use the same ID for this record.

• Use certificate and form to the same application of ADF basic authentication

  Hello

  We have an application that needs to use time based authentication CLIENT-CERT and FORM.

  I have configured a domain with Client certificate requested and applied, generated a client certificate, created an Asserter custom identity with a Login Module and successfully recorded in our application using the CLIENT-CERT. , our customer wants to use the FORMS authentication at the same time with the CLIENT-CERT authentication type.

  The idea only I had was to use a servlet proxy deployed on another instance of WebLogic (10.3.6) that uses the CLIENT-CERT authentication that will forward requests to the main ADF application using classic FORM based authentication. The problem with this approach is that the proxy servlet is accessible using HTTPS and the communication between himself and the application of the ADF is made by using HTTP, so the client browser is redirected to HTTP on first access. For example, if I used Apache to proxy requests that would have been easily solved using RequestHeader set true WL-Proxy-SSL.

  You have any other suggestions on how to achieve this?

  
  

  Thank you in advance,

  
  

  Ionut Cristian Paraschiv

  Multichannel Solution Architect

  Advahoo Business Solutions
  

  I found a work around for this problem:

  -l'application uses FORMS authentication in function

  -l'application is deployed on a server managed with Client Cert has requested and applied (only clients with certificates will connect over HTTPS)

  -the login page has only one input for the password text

  -in the bean of login, in the doLogin() method page, we can get the certified client and get the username with a custom class of UserNameMapper

  Object certChain = request.getAttribute ("javax.servlet.request.X509Certificate");

  Certificate CERT [] = certChain (certificate []);

  X509Certificate cert = (X509Certificate) CERT [0];

  ... to get the user name

  Ionut Cristian Paraschiv

  Multichannel Solution Architect

  Advahoo Business Solutions

• Can I open Apex application for the same user with 2 different sessions.

  Hello
  
  I have a problem with apex application session.
  
  In a new browser window, I logged in with user name and password and I get in the application of the apex.
  I want to open the same application in a separate window and I connect again.
  but when I return to my previous window to do something it prompts me to the login screen.
  I'm losing the session. Is there a way to keep the two live sessions.
  
  Any ideas?
  
  Thank you.
  
  Ally.

  See this thread for a possible idea... : Re: two active sessions in the two tabs of the browser - how?

  Thank you

  Tony Miller
  Webster, TX

• my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  Hello
   
  (1) what version of Windows are you using?
  (2) remember to make changes to the computer before the question?
  (3) what browser do you use for Internet Radio?
  (4) what do you exactly mean by the loss of the webradio?
  (5) on which site you want to play the radio?

  (6) using WIndows Media Player to listen to Radio Online?
   
  See also a few following articles dealing on VoIP.
  Troubleshooting VoIP
  http://TechNet.Microsoft.com/en-us/library/ff849747.aspx
  How IP phones connect to the network
  http://TechNet.Microsoft.com/en-us/library/gg425740.aspx
   
  Get back to us with more information on the issue so that we can better help you to provide the resolution.

• Mac with bootcamp to format and reinstall windows, can I use the same cd key and product?

  I want to reformat my mac...

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  If it worked the first time, there is no reason that it will not work the second time on the same computer, as long as the Windows 7 is a full version.

  If this is an upgrade version, you must have the qualifying OS installed and enabled before you upgrade and it will work.