Using the space bar to move through the pane puppet causes the timeline to play and error that appears

Similar Questions

• Sam s173-1415: cannot use the restore CD - 'Bad Machine' error message appears

  I have a s173 1415. I had to format the hard drive, when I went to use the original CD that came with the laptop it said BAD MACHINE. So I installed Windows XP.

  Now, I have all the necessary drivers and can not find one for the dvd/cdr drive, so sometimes the disc is recognized and sometimes it disappears.

  I want to set the laptop to original state, but the CD won't let me.
  What can I do?

  Hello

  It s very strange that this error message appeared.
  Generally all compatible CD should be delivered with this laptop.
  If you want you can order form taken CD supported and compatible, Toshiba service partner. It s not very expensive.

  You will also find the page of all drivers on the Toshiba driver download:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp#

  Please install all drivers in the correct order. The chipset utility must be installed and the beginning.

• Why can't I use the space bar to move rectangle selection I.E. selections. With the help of a pc in WIN7

  Why can't I use the space bar to move rectangle selection I.E. selections. With the help of a pc running WIN7. The hand icon appears, but the selection disappears. reappear when the version of the space bar

  This is a normal behavior. You need not use the space bar to move a selection.  Just have the chosen selection tools and have the cursor within the selected area.  Then just left-click and drag.

• use restart from scratch using the option "ALT F10" and lose everything. Help, please!

  Whenever I try to connect my laptop, a screen invites me to do a repair of launch set-up. It goes through the motions for ten minutes and the screen turns white. The only way I can get at all is to restart all from scratch using the option "ALT F10" and lose everything. Any advice I would really appreciate.

  Hello

  1. Since when are you facing this problem?
  2. You did any recent changes?
  3. What version of Windows is installed on the computer?

  I suggest that you go into recovery options and try to perform system restore and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Otherwise, I suggest you to give us more information, so that we can better help you.

  It will be useful.

• How to configure and use the local storage dirve and usb

  My company bought a server DMM cisco as well as 10 players of 4310 g dmp.  I tried to work on mine here to get it all working.  Let me expose what we would do first before to get into the details.

  The cental DMM will it play any content and be used to create and manage the content here at company wehre I am.  However my boss wants to send dmp individual players (4310 g) out to our factories across the country.  He wants me to be able to creat content or allow a person managing the exact address to edit the content and then push the content from the server DMM to corporate local DPM record either on local storage or attached thumb order.  I guess my questions on what are the following.

  (1) is it necessary to push the content locally for playback?  Willingness to play the content of our dmm on the wan to do lots of traffic?  Presentations could be as simple as a welcome page based presentation playing images video and flash.

  (2) based on local content would be a wise decision I'll have to see exactly how this is done poorly.  In the settings of the dmp, I see the setting of local storage and turned it on and set to read/write.  In regard to the command of thumb gose exactly how I implement that so that DPM can see?  I plug to the back of the drive, and it seems that it is active but the management console of the player I don't see anyway to actaully see if she knows the USB.

  (3) how will push the content for local storage and control of the DMM thumb?  It looks like I can send things to the storage internal if package transfer and or advanced/DPM deployment tasks or server file.  What exactly is the difference between these two?

  (4) Lastly how I actually play the local content of the dmp?  Can I set this up on a schedule of the dmm just like I would if he played the local dmm?

  I searched through the documentation, but I have not found any good docs who are clear to actually how to do these things.  So, any help would be appreciated.

  Thanks in advance.

  gec5741

  Hi Glen,

  Here are the answers to your questions

  1) is it nessesary to push the content locally for playback?  Will  playing content from our dmm over the wan be to much traffic?   Presentations could be as simple as a basic welcome page to a  presentation playing video and flash images.

  It is not required to push the content locally, you can also play the DMM directly. The main advantage of playing on the spot, is that you can transfer the videos several hours or days before the presentation begins to be played if you deploy content off hours and then, when he's ready to start playing the new presentation.

  If you play directly the content of the DMM, the content will be transferred at the time of the DMP starts playback. This may fail if the WAN link is saturated at that time here.

  2) If pushing the content local would be a wise decision I am having  difficulty seeing exactly how this is done.  In the dmp settings I see  the local storage setting and have it turned on and set to read/write.   As far as the thumb drive gose how exactly to I set that up so the dmp  can see it?  I plug it in the back of the player and it looks like it's  active but from the management console of the player I do not see any  way to actaully see if it knows about the usb thumb drive.

  You don't need to do anything to enable USB storage, simply plug it in. To confirm that the DMP is able to see it properly, the simplest way is to connect to the DPM via FTP and confirm that he has a «usb_2» directory This "usb_2" directory, where is the USB drive is mapped.

  3) how will I push the content to the local storage and the thumb drive  from the DMM?  It looks like I can send things to the internal storage  though the advanced tasks/deployment package and or file transfer to DMP  or server.  What exactly is the differnce between these two?

  The task of "File transfer" will just do this, transfer a file to the DMP. The deployment package is smarter and will transfer all the contents of a presentation and organize them in a structure that can be used to read the content locally. You should always use the deployment package.

  4) finally how will I actually play the content from the local dmp?  Can  I set this up on a schedual from the dmm just like I would if it was  playing from the local dmm?

  Yes, she may be scheduled as any other presentation.

  I suggest you have a look at the link below. He explains the steps required to configure the deployment package and read the content deployed with it.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMM/user/guide/DMP/CDs.html#wp2188026

  I hope everything is clear now, but if you have any questions, let me know. I'll try to answer.

  Daniel

• I would like to cut out an object using the Quick Selection tool and drop the object into another image. Can anyone help

  I use background images and want to cut objects of other JPEG files using the Quick Selection tool and drop them in the background image. So if I have a banana and select the object, I need to copy the banana in the context on the other.

  Hope it makes sense.

  Gary

  Select the banana. Right click > copy layer. Move tool. Click and drag to the other file. Place on the image.

  GOLD: load history and banana in a stack (file > Scripts > load file in the stack). Select banana and layer for copy or create the layer mask.

  Benjamin

• Is it possible to look at the code generated using the timeline?

  I'm sitting here grumbling because my super-easy slideshow look right and I know that if I used the tools of design/timeline, would be perfect.  The only problem is, I want to load my images using an XML file and the only way I know to do is to go strictly code.  Is it possible for me to do the interpolation using the timeline and view the code that generates lightning to start the slide show.  It would be a very useful learning tool.

  Create your pre-teen.  Right-click on one of the tween frames and click on copy movement in as3 and paste the code to inspect or use.

• Hai iam Amaladas from Chennai (India) iam Remote Sensing and GIS researcher here most people using the Google Earth application and five members using Iphone, we need a Google Earth app (India)

  Hai iam Amaladas from Chennai (India) iam Remote Sensing and GIS researcher here most people using the Google Earth application and five members using Iphone, we need an app (India) of Google Earth?

  https://www.Google.com/search?q=Google+Earth+app+India&ie=UTF-8&OE=UTF-8

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Read the motor current by using the controller PXI-7350 and MID-7604

  I use the PXI-7350 controller and MID-7604 drive to run a motor drive.  I would like to be able to measure the motor current while moving the engines.  This measurement is possible?  If so, what commands are required to read the motor current?

  Hi Casey,.

  the 7604 can limit the current to a value that is selectable by the user and you can activate the current reduction if the axis is stopped, but there is no way to read the current engine. If you want to measure the motor current, you must do it with an external device, but due to the current chopping and multiphase, motor control stepper motors is not a trivial task. Micro step mode the current phase looks like a rough sinus with lots of harmonics signal, so you will need to do a true measure requiring RMS of expensive measurement equipment.

  Anyway. If you need to know the temperature of the motor you should better measure the temperature directly. The most inexpensive device OR do is the NI USB-TC01, but there are many other options available.

  Kind regards

  Jochen

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• I use Windows XP and care April 2014 if I always use the it, what will happen after that Microsoft no longer supports it?

  I use Windows XP and care April 2014 if I always use the it, what will happen after that Microsoft no longer supports it?  My computer will become unusable?  It works great and I would keep it if I can.  I use a Dell Inspiron 530 desktop.  Some people have told me that "nothing will happen" and others tell me that my computer will be more vulnerable.  I use ESET NOD 32 and Malwarebytes.  They tell me that they should still continue to work.  I am told that because my computer was purchased in September 2008, he cannot me upgraded to Windows 7.  I'm not a geek and would need assistance "passage" my files from one computer to the other as well.  And then what to do with my old top office.  I'm very worried and I had to face the fact that Microsoft is not going to deliver any security updates patches after April of 2014.

  I can't wait to hear from someone on this problem and more just to go out and invest in Windows 8!  Thank you.

  I can tell you one thing, all or almost of windows xp device drivers will disappear from the computer manufacturers support websites and will reappear on all these shady sites who claim to be download for free but comes with unwanted software. Download the latest device drivers and keep several copies of them and download them to your skydrive or dropbox account fo guard.

  I doubt that will happen. I've seen Windows 2000 drivers still on websites mfg.

• why there are four drives in the Fable: The Lost Chapters pack but we can only use the first to play?

  original title: fable: the lost chapters
  Hello! I wonder why there are four drives in the Fable: The Lost Chapters pack but we can only use the first to play?

  My guess would be that the other 3 drives are required for installation, because they contain the installation files, but actually the game startup files are only on the 1st disk.

• Mac with bootcamp to format and reinstall windows, can I use the same cd key and product?

  I want to reformat my mac...

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  If it worked the first time, there is no reason that it will not work the second time on the same computer, as long as the Windows 7 is a full version.

  If this is an upgrade version, you must have the qualifying OS installed and enabled before you upgrade and it will work.

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc