using the update query exists

Similar Questions

• make a function using the update query - error PLS-00103

  I get the following error message in my pl/sql developer every time, I try to create this function in my package
  PLS3-00103 encountered the symbol ";" when expecting one of the following return
  
  Please note, I'm trying to do is to get a user entered to perform an update for a specific row in a table called accountingtable that is located in the CDC schema. I don't want to make a comeback but in my update function.
  
  
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  The package Specfication
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  FUNCTION update_price (needed_newprice in ccl.accountingtable.price%rowtype,
  partforupdate in ccl.accountingtable.part_id%rowtype,
  colourpart to ccl.accountingtable.colour_id%rowtype);
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  package body
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  FUNCTION update_price (needed_newprice in ccl.accountingtable.price%rowtype
  partforupdate in ccl.accountingtable.part_id%rowtype,
  colourpart to ccl.accountingtable.colour_id%rowtype);
  
  
  
  BEGIN
  Update accountingtable
  fixed price = (needed_newprice)
  where part_id = (partforupdate)
  and colour_id = (colourpart);
  
  END update_price;
  
  Thanks in advance for any help.

  Procedure update_price (needed_newprice in ccl.accountingtable.price%rowtype,
  partforupdate in ccl.accountingtable.part_id%rowtype,
  colourpart to ccl.accountingtable.colour_id%rowtype);

  No % rowtype. Use type %

  Procedure update_price (needed_newprice in ccl.accountingtable.price%type,
  partforupdate in ccl.accountingtable.part_id%type,
  colourpart to ccl.accountingtable.colour_id%type);

  is not respected in the body

  create or replace pacakage body test_board is

  procedure update_price (needed_newprice in ccl.accountingtable.price%rowtype---ici
  partforupdate in ccl.accountingtable.part_id%rowtype,
  colourpart to ccl.accountingtable.colour_id%rowtype) is

  Published by: user2679851 on June 2, 2010 14:01

• Error in database engine Microsoft JET '80004005' operation must use an update query.  / fax_remove/index.asp, line 115

  everything began to receive the following error message

  Microsoft JET Database Engine error '80004005'

  Operation must use an update query.

  /fax_remove/index.asp line 115

  
  

  for the following Web page

  Remove.canchair.com

  
  

  no coding changes have been achieved
  

  Use your host control panel to check the permissions of the remote folder that contains the mdb and the mdb itself. Contact your host if you are unsure how to proceed.

• [Microsoft] [ODBC Microsoft Access driver] Operation must use an update query.

  Trying to insertion or put to update an access database I get on the error message:
  
  [Microsoft] [ODBC Microsoft Access driver] Operation must use an update query.
  
  What is the cause of this, and what could be the solution?
  
  Thank you.
  
  Ross
  

  I discovered after testing that the directory where the database file resides must be barking like rwx as well - not intuitively obvious, certainly!

  I ended up creating a new directory with the file of database inside also well marked for write access in the world and relying on my permissions of normal file off root on the server to protect the directory and file.

  Thank you!

  Ross

• How to select only the part by using the sql query

  Hello

  I have the task to retrieve only the integral of the input text by using the sql query.

  The entry is as follows

  Entry for the price setting

  $12.5 (FYI without space)

  $ 12.5 (FYI single space)

  $ 12.5 (double space FYI)

  $12.5 (FYI multiple space)

  $12.5 (FYI multiple space)

  Output expected of 12.5

  The price is the type varchar2 column in the store_price table.

  Please let me know how to achieve this.

  Thanks in advance.

  If this is always the case that you get a $ followed by a number of places, you can use something like:

  Select to_number (ltrim ('$ 12.5',' $')) DOUBLE

  or

  SELECT ltrim ('$ 12.5',' $') OF double

  but take care of your nls_numeric_character settings if they are defined so that, for example, a comma is the decimal separator, you will have a problem.

  HTH

• After you have reinstalled my old CS6 Design Standard on a new Mac Pro I can't use the updates in help. I only receive offers on update creative Cloud applications. I don't have any application of CC. How to find updates for my applications CS6?

  After you have reinstalled my old CS6 Design Standard on a new Mac Pro I can't use the updates in help. I only receive offers on update creative Cloud applications. I don't have any application of CC. How to find updates for my applications CS6?

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

  When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

  

  Hi Colin,

  Please try to reinstall the creative cloud after disabling antivirus and firewall.

  Reference: error download or update Adobe Creative Cloud applications

  Concerning

  Megha Rawat

• Using the Update Manager when he is incapable of vMotion.

  Using the Update Manager when he is incapable of vMotion.

  I have three Essentials licensed 5.0 hosts and vCenter operating on one of them as a virtual machine. All VM runs on the local disk. I'm tired of patching of CLI and want to use the Update Manager. I can easily do that, on the other hand, two hosts where vCenter is not running but obviously not on the host where it is running.

  I have a data store that is shared in the form of a QNAP NAS, but I can't Storage vMotion because of licensing restrictions. I can't do a vMotion "shared nothing" to another host due to the same restriction. It's like a catch-22 situation.

  I have the service window where I can turn off all the virtual machine

  Anyone has ideas on the use of Update Manager in this configuration or do I just forget about it

  Clone the vCenter even to another VM and make the vcenter temp on another host or elsewhere to deploy a new vCenter on another host and update the host from there

• How to use the update updates 5.1.0a to 5.1.0b?

  Sorry, I'm a newbie.

  Can someone please advise me on how to upgrade my ESXi of either 5.1.0 & 5.1.0a to 5.1.0b using the Update Manager?

  Is it possible to update without having to use the ISO (using the installation of patches)?

  I have 2 main questions:

  1. impossible to update Manager (someone has helped me create a baseline using downloaded ISO "VIMsetup")

  -Guest disconnected with weird error console (sorry no screenshots that I discovered that it was a NETWORK card driver problem much later)

  -Blocked 26% (if you use the Update Manager)

  -some weird message on console, can only view or list a few config

  2. cannot perform direct upgrade of iso or disc bootable on Dell G 12 servers (Dell R320 & r.620)

  -No found NETWORK card (if you use disks or virtual disks via iso mount)

  The file ~3.4GB (arther than 3 TB) you mention is very probably the package of vCenter Server (VMware-VIMSetup-all - 5.1.0 - 947939) and does not contain installation ESXi (VMware-VMvisor-Installer - 5.1.0 - 799733.x86_64.iso).

  Update Manager cannot be used to update or patch vCenter Server, but only the ESXi hosts (or virtual appliances).

  André

• Messed up gets worksheet formatting when you use the update to add additional sheets

  Someone had problems with cfspreadsheet where a sheet has formatting issues when the sheet is added as an extra sheet by using the update action, while the same sheet looks good when the leaf is the first or the only sheet added using the action of writing?

  I use 10 CF.

  For what it's worth, according to some other posts that I found here, I've reconfigured my code so that it creates an object of unique spreadsheet with multiple sheets, rather than objects of individual worksheet for each sheet, then he makes a single call to write this object on the disk. That seems to have solved most if not all of my formatting issues. The basic takeaway I suppose is do not use the update action if you can possibly avoid it.

• I'm trying to update CS 6Illustrator tool by using the update but I continually get an error saying:

  I'm trying to update CS 6Illustrator tool by using the update but I always get an error saying "updates could not be applied." How can this be?

  Here is my log file:

  Update Adobe Illustrator CS6 (version 16.2.1)

  Failed installation. Error code: U44M1P7

  If you are using a mac: http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

• Copy data using the MDX query.

  Hi all
  
  I use the Version 11.1.2 Essbse now I want to copy my data from a component of other component based on their UDA and erase this component particularly in ASO Cube using the MDX query.
  
  For example:
  
  I have my data in 'Part No' now I want to copy the data to based on their UDA Component1.
  
  
  Thank you
  
  Micka

  you will need to use a custom or "procedural" calculation You can find information about it at http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/maxl_excalc_as.html

• Avoid using the same query...

  How can I avoid to use the same query again and again using a single query, such as
  
  SELECT
  a,
  b * (SELECT COUNT (C1) FROM T2);
  c * (SELECT COUNT (C1) FROM T2);
  d * (SELECT COUNT (C1) FROM T2)
  Of
  T1;

  Fanny says:
  How can I avoid to use the same query again and again using a single query, such as

  SELECT
  a,
  b * (SELECT COUNT (C1) FROM T2);
  c * (SELECT COUNT (C1) FROM T2);
  d * (SELECT COUNT (C1) FROM T2)
  Of
  T1;

  A few cross join?

  select a, b*cnt, c*cnt, d*cnt
    from t1, (select count(c1) cnt from t2)
  

• How can I integrate my tree using the tree query in combobox

  Hi all
  
  I have a request of tree and you want to use the same query tree to put a tree inside a ComboBox as combobox category in this link
  http://forums.Oracle.com/forums/search! default.jspa
  
  Can someone help me to do it... I also use my fine navigation tree.
  
  With respect,
  Sunil Bhatia

  Hello

  LEVEL is not a real column - it's a nickname, so it shouldn't be on your table, because it generates the SQL.

  Your statement could be something like:

  SELECT LPAD(' ', 2 * (LEVEL-1), '.') || "NAME" d, "PAGE_NO" r
  FROM APEX_PAGES
  WHERE PAGE_NO NOT IN (SELECT "PAGE_NO" FROM "#OWNER#"."APEX_USER_PAGES" WHERE "APP_USER" = :APP_USER)
  START WITH PAGE_NO = 1
  CONNECT BY PRIOR PAGE_NO = PARENT_PAGE_NO
  

  I don't know what would be your starting page number - it would be to the top of the tree - so I just put 1 in this example.

  Here is a page that I put in place using my example of EMP table, just to show what would be the result: [http://apex.oracle.com/pls/otn/f?p=35917:22]

  Andy

• update of the lookup using the fusion query table

  Hi Experts,

  My requirement is, we have total 4 tables called x, y, z and a_lookup table. join between these tables column is deptno.

  I need to update a_lookup table based on less than the conditions of the

  condition1: table a_lookup update with the corresponding records of X and Y

  condition2: If there is no record in X does not match, then we have to compare with Z and update the table a_lookup accordingly

  Here is the table scripts and my attempt as well.

  Only doubt is, is my fine appearance of MERGE statement, or is it otherwise better update the a_lookup table?

  Please share your ideas on this.

  create table x (empno, deptno number);
  

  -Samples

  Insert into x
  Select the level, level * 10 double connect by level < = 10;
  

  create table y (empno number, number deptno).
  

  -Samples

  Insert y
  Select the level, level * 10 double connect by level < = 5;
  

  create table z (empno number, number deptno);
  
  -Samples

  Insert into z
  Select the level, level * 10 double connect by level < = 10;
  

  create the table a_lookup (empno number, deptno_lookup number);
  

  -Samples

  insert into a_lookup
  Select null, level * 10 double connect by level < = 10;
  

  -Merging of records in a_lookup based on X, Y, z. using right outer join on X and Y

  Fusion in a_lookup one

  using the ((select x.deptno, x.empno from x, y where x.deptno = y.deptno)

  Union of all the

  (select z.deptno, z.empno in z, (select x.deptno from x, y where x.deptno = y.deptno and y.deptno is null) res1)

  where z.deptno = res1.deptno)

  ) res

  on (a.deptno_lookup = res.deptno)

  When matched then

  update set a.empno = res.empno;

  See you soon,.

  Suri ;-)

  Like this

  Fusion in a_lookup one

  a_l'_aide_de)

  Select deptno nvl (a.deptno, z.deptno)

  empno nvl (a.empno, z.empno)

  z

  left

  Join them)

  Select x.deptno

  x.empno

  x

  left join y

  On x.deptno = y.deptno

  where y.empno is not null

  ) a

  On z.deptno = a.deptno

  ) b

  on)

  a.deptno_lookup = b.deptno

  )

  When matched then

  update set a.empno = b.empno;