[Microsoft] [ODBC Microsoft Access driver] Operation must use an update query.

Similar Questions

• Error in database engine Microsoft JET '80004005' operation must use an update query.  / fax_remove/index.asp, line 115

  everything began to receive the following error message

  Microsoft JET Database Engine error '80004005'

  Operation must use an update query.

  /fax_remove/index.asp line 115

  
  

  for the following Web page

  Remove.canchair.com

  
  

  no coding changes have been achieved
  

  Use your host control panel to check the permissions of the remote folder that contains the mdb and the mdb itself. Contact your host if you are unsure how to proceed.

• DIAG [37000] [Microsoft] [ODBC Microsoft Access driver] syntax error in the statement CREATE TABLE

  Dear Experts,
  We work with software that uses the database (excel / access / SQL / Oracle) via the windows ODBC drivers. He can't go to the database. here below you can see the ODBC log:

  LFM 1178-1204 OUT SQLAllocHandle with code 0 (SQL_SUCCESS) back
  SQLSMALLINT 2
  SQLHANDLE 0X06CC1F48
  SQLHANDLE * 0X0C460BCC (0X05D3AC30)

  LFM 1178-1204 ENTER SQLDriverConnectW
  HDBC 0X05D3AC30
  HWND 0X00000000
  WCHAR * 0X64CD8B34-[3] "*-0.
  SWORD                       -3
  WCHAR * 0X64CD8B34
  SWORD                       -3
  SWORD * 0X00000000
  UWORD                        0

  LFM 1178-1204 DATED SQLDriverConnectW code 0 (SQL_SUCCESS) back
  HDBC 0X05D3AC30
  HWND 0X00000000
  WCHAR * 0X64CD8B34-[3] "*-0.
  SWORD                       -3
  WCHAR * 0x64CD8B34 -[3]
  SWORD                       -3
  SWORD * 0X00000000
  UWORD                        0

  Understand that if someone can help?
  Thank you
  Hassan

  Hassan

  This issue is beyond the scope of this site and should be asked on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• make a function using the update query - error PLS-00103

  I get the following error message in my pl/sql developer every time, I try to create this function in my package
  PLS3-00103 encountered the symbol ";" when expecting one of the following return
  
  Please note, I'm trying to do is to get a user entered to perform an update for a specific row in a table called accountingtable that is located in the CDC schema. I don't want to make a comeback but in my update function.
  
  
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  The package Specfication
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  FUNCTION update_price (needed_newprice in ccl.accountingtable.price%rowtype,
  partforupdate in ccl.accountingtable.part_id%rowtype,
  colourpart to ccl.accountingtable.colour_id%rowtype);
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  package body
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  FUNCTION update_price (needed_newprice in ccl.accountingtable.price%rowtype
  partforupdate in ccl.accountingtable.part_id%rowtype,
  colourpart to ccl.accountingtable.colour_id%rowtype);
  
  
  
  BEGIN
  Update accountingtable
  fixed price = (needed_newprice)
  where part_id = (partforupdate)
  and colour_id = (colourpart);
  
  END update_price;
  
  Thanks in advance for any help.

  Procedure update_price (needed_newprice in ccl.accountingtable.price%rowtype,
  partforupdate in ccl.accountingtable.part_id%rowtype,
  colourpart to ccl.accountingtable.colour_id%rowtype);

  No % rowtype. Use type %

  Procedure update_price (needed_newprice in ccl.accountingtable.price%type,
  partforupdate in ccl.accountingtable.part_id%type,
  colourpart to ccl.accountingtable.colour_id%type);

  is not respected in the body

  create or replace pacakage body test_board is

  procedure update_price (needed_newprice in ccl.accountingtable.price%rowtype---ici
  partforupdate in ccl.accountingtable.part_id%rowtype,
  colourpart to ccl.accountingtable.colour_id%rowtype) is

  Published by: user2679851 on June 2, 2010 14:01

• using the update query exists

  Hello
  I run the query below
  and I'm ggetting error
  
  update of sh_mem one
  Set a.custno =
  
  (select b.custno in the ac_details b where to_number (a.memrefno) = b.memberno)
  where exists (select 1 from ac_details b where to_number (a.memrefno) = b.memberno)
  SQL > /.
  Set a.custno =
  *
  ERROR on line 2:
  ORA-01407: cannot update
  ("TRIAL". "" "" sh_mem '. "" CUSTNO') with the NULL value
  
  number of records in both tables do not match
  
  Help, please

  HEMU wrote:
  OK Sir
  It worked

  But you don't score one of the posts as 'Correct' or 'useful '.

  :-(

• I have Adobe photoshop Elements 4 and use windows 10. When you try to import photos and do other things in Adobe I the following error coming. {Microsoft} [ODBC Access driver} cannot open database' the may not be a database of your application]

  I have Adobe photoshop Elements 4 and use windows 10. When you try to import photos and do other things in Adobe I the following error coming. {Microsoft} [ODBC Access driver} cannot open database' the may not be a database that your application recognizes, or the file may be corrupt,.] Everything worked very well this fault has just come. Anyone know how to solve this problem.

  Settle into the Photoshop Elements forum.

• Driver ODBC for Microsoft Access/no visible

  We are running ColdFusion MX Enterprise ColdFusion MX Developer *.
  Solaris operating system
  Drivers of integrated according to http://www.adobe.com/products/coldfusionmx61/productinfo/product_editions/ data base
  Microsoft Access/ODBC, SQL Server, MySQL, Oracle, DB2, Informix, Sybase
  
  We do not have Microsoft Access ODBC driver / in our version.
  Is it because this driver has not been installed?
  Is there an option to select the driver for the witch to install or not during installation or all the drivers installed automatically?
  
  Thank you.
  
  

  I think that doesn't tell you what operating system is available, and what database integrated drivers are available, no contract that are available to all.

  The list at the bottom of the page actually tells you the real story: ColdFusion MX 6.1 comparative function view ODBC is NA for each operating system except Windows.

  Also, you can check on the Matrix of Support of complete systems for MX 7, in particular the section for Solaris. No access or ODBC. I'm sorry.

  Phil

• Error: database name not found and no default driver specified, installing a program and pay using the Microsoft access database.

  Original title: name not found and no data source driver by default specified

  Hi all, I tried to google search and try all methods that talk about the world. but I can't always solve this error for 1 week.
  I have install the program pays to computer A, and it works fine.
  But I install the same program to computer B, it gives me this error
  data source name not found and no driver specified default.
  the computer is windows 7 32 bit, and I did add the system DSN.
  It is using microsoft access database.

  does anyone have the solution for this?

  Thank you

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Office 2010 - IT Pro General Discussions TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• I am designing a task manager with a reminder system that works in Microsoft Access. DOE anyone know of a way to do just using Access 2003?

  How can I create a task with Microsoft Access Manager?

  Hello Mr. Jama,.

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Access 2003 and would be better suited to the community of Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Microsoft Access with Unicode

  Hello

  I recently updated my site in CF5 CF9 running on a virtual server. Here are the specs.

  CF Version: 9,0,0,251028

  Edition: Enterprise

  Operating system: Windows Server 2008

  My old code worked fine except that some queries were turning slowly. My webhost has suggested that I have change the driver to "Microsoft Access" to "Microsoft Access with Unicode." As suggested, it made things much faster. However, there are some pages on my site that didn't work. I did some research and found that I had used the two words 'reserved' for table names that caused pages to fail when you use 'Microsoft Access with Unicode' as the driver. Curiously, the pages worked well with the regular driver of "Microsoft Access".

  I'm now left just a mistake that I can't solve. I get the following error ONLY if you use the "Microsoft Access with Unicode" driver.

  Run database query error.

  Error running query of queries.
  The column reference select [GetList.ItemNo] is not in the table [GetList].

  This is the code that it is.

  <!--use QofQ to join archives interviewed against basket data-->
  < CFQUERY NAME = "GetProducts" DBTYPE = "query" >
  SELECT

  AS ItemNo GetList.ItemNo,
  GetList.Item point, AS
  GetList.Grades AS Grades,
  Price GetList.Price AS,
  Amount of GetList.OrderQty AS,
  (GetList.OrderQty * GetList.Price) AS ProductSubTotal
  OF GetList
  < / CFQUERY >

  Is there a problem with "Microsoft Access with Unicode" play not with query of queries?

  I would be very happy any contribution to this issue.

  Thank you

  Steve

  ... two words 'reserved' for table names that caused pages to fail when you use 'Microsoft Access with Unicode' as the driver. Curiously, the pages worked well with the regular driver of "Microsoft Access".

  Different database drivers can have different reserved words.

  Run database query error.

  Error running query of queries.
  The column reference select [GetList.ItemNo] is not in the table [GetList].

  This is the code that it is.

  It seems very unlikely that the error has something to do with the driver used in the original request.  That means the original query 'GetList' look like? It contains the "ItemNo" column OR have this column more than once?

• Uninstall the Microsoft IPMI driver (IPMIdrv.sys) on Server 2008 R2

  Hello
  Several sources mention that the driver IPMI from Microsoft and Intel IPMI driver should not be loaded at the same time. If the two drivers are installed, the resource contention problems cause unreliable operation.
  I want to use the Intel driver and tried to uninstall the Microsoft IPMI driver (IPMIdrv.sys), but all my efforts have failed so far.
  Obvious way seems to be to start device, go to "System devices" Manager, "Microsoft generic compatible peripheral IPMI" right-click, select Properties, and on the driver tab, click on "Uninstall". When I do that, I don't get an error message, but when the reboot of the machine, "Microsoft generic compatible peripheral IPMI" reappears.
  I've also tried using DevCon.exe, but I got the same result as before. I also tried a few 'dirty' things, but they don't work as well.
  I am aware that I can choose to stop (disable through Device Manager) the Microsoft IPMI driver, but I really wish to uninstall completely (the evidence being IPMIdrv.sys should not appear when driverquery command is executed).
  Also, I can see in the Device Manager, Microsoft Generic IPMI compatible device properties -> resources -> list of the conflicting devices:
  Range of input/output, CA 0, 2 - 0CA 2 used by:
  Motherboard resources
  Range of input/output, CA 0, 3 - 0CA 3 used by:
  Motherboard resources
  Does have a meaning?
  Intel has published a document entitled the IPMI driver conflicts resolution in Windows Server 2003 R2, but as its name suggests, it is intended to Server 2003 R2, and the mentioned techniques do not work for Server 2008 R2.
  The pointers will be greatly appreciated.
  Thank you
  CD

  Hello

  It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• Save my computer while Microsoft will allow me to use this computer

  I'm with the program of warrior of woundered at Walter reed hospital.  They gave me a laptop Dell Inspiron with windows xp.  He worked for a few weeks and it stopped in the middle of an emnail in Iraq.  It now comes with license error and all licenses to date.  I work with it, but it won't allow me.  best buy said I need to contact thank you reenstatement to have my work computer once more.  Can you please allow me to have my laptop.  I'm in * address email is removed from the privacy *.

  Once xp is activated through microsoft servers, the license to use the OS is active for the life of the computer, unless the OS is uninstalled from the computer.   When it is uninstalled the o.s. is disabled and the license is open for use on another computer.

  In addition, if the computer you have received had installed xp recently within the last 30 days and it has not been activated / license, then you would have received nag reminders on your desktop on the activation of your operating system

  In addition, since you have a laptop, its hard disk probably has a partition hidden with your files retrieved on it.   The hidden restore partition has your windows xp configuration files that can be used to install the laptop to its factory condition.  The method is called restore factory and the product key for your machine must be on a sticker of halographic under the laptop.

  So, it looks like you have another problem that is not related to the license for your xp...

  The question now is if your laptop has a sticker with the code key of the product on this subject.

• How can I add a Microsoft Access Table for Dreamweaver CS6?

  Hello world

  I am trying to add my Access Table already created in Dreamweaver CS6. When I try the file > Input > tabular data, it does not work. It must be in the format Microsoft Access SQL. The version of Microsoft Access that I use is 2013. Computer Windows 10.

  Thanks in advance for your help.

  YourAccessFile.accdb">Click here to download an Access file

  Nancy O.

• Dreamweaver CS3 and Microsoft Access

  I'm currently building a website using Actinic v9 CMS and Dreamweaver CS3 for a project. I posted the same topic on Actinic forums.

  Actinic has a built-in connection system and it uses a Microsoft Access database (I think that the version 2000). What I'm trying to do in Dreamweaver CS3, is to create a secure registration function. Basically how it works is as follows:

  A php script runs and passes on the information on the form to be temporarily stored in a MySQL database. A javascript written a password generated randomly to be read by php - php send an email with the attached code and user name - also temporarily stored in MySQL.

  When the user enters a hyperlink in the email, they will fill in their user name and the password - password is then recovered by an another php for the MySQL database by finding the correct username. A Javascript will see if both match and answer 'true' or 'false' for the php script. If this is true, php will retrieve all user data from the MySQL server and put it in Microsoft Access database of Actinic. If it's false, php will write the code is incorrect and ask the user to retype the fields. After five attempts, php will wipe away the registration of the user of the MySQL database and will have to re-register.

  What I need to know, it's can handle MS Access databases and how Dreamweaver CS3 can help me with this? I have already learned how to manage MySQL in php, it's that I never used Access to the web databases before. Until I started with Actinic, I don't think you could.

  My field is with UK2.net whislt, accommodation is in host - It.co.uk

  
  Thank you.

  __________________________

  Adobe Web Premium CS3.3 Student Edition - Yes, I know that is old, but I can't allow myself to be a student--even with 80% off...

  in dreamweaver, click WINDOWS in the top menu and select the DATABASES

  After a click on the + symbol and select custom connection string.

  You must export the data from "ms access" as .mdb, then import it from dreamweaver.

  Kind regards

  Aroldo

• Unable to install audio driver because the Microsoft bus driver should be installed

  Hello!

  I have a portable satellite series A. When I try to install the sound drivers it says "Microsoft bus driver should be loaded before installing the Realtek High definition audio driver.
  I downloaded uplods KB835221 and kb888111xpsp2 and they should solve the problem, but they do not have. What should I do now?

  Hello

  The proper installation order is necessary and important.
  You installed SP2?
  Sometimes the Toshiba drivers must also be updated after installation of SP2.
  But all the information on the driver installation, you should find the driver download area.