Using variables on localization files

Similar Questions

• Impossible to use variables shared when deploying an exe file

  I tried to use variables shared for some time. I have been all over the forums and still have had no luck. I can get these VI to work until I have install on another PC while they do any work. I don't know what I'm doing wrong. I forced libraries to deploy, but they still do not work on the machine, that I install the exe file. I don't think that libraries are being installed. I can't see in the Distributed System Manager. I can see libraries on other machines, but not on the one that I have.

  Have you included libraries in section always included the source files.  You did, and then change the destination of the library of media files on the Source code file settings tab?

  In the code are you using the correct path when calling the libraries deployment method.   Current path of the VI should be stripped twice and have "data\name.lvlib" built in the end.

• Variable using the Dymanin ODI file name creation

  Hi all
  I am creating a flat file dynamically using variables of ODI. I'm following a document in metalink (using dynamically specified A file name or directory name with ODI [423635.1 ID]). However, I get the following error whenever I try to run the interface:
  
  java.lang.NullPointerException
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.i (e.java)
  at com.sunopsis.dwg.cmd.h.y (h.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source)
  
  IKM: IKM SQL to the file append
  
  I'm sure that it is impossible to locate the file. Can be the value of the variable is not passed, not sure. But, if I mention a name like abc.txt, it works. It creates a new file with abc.txt. However, when I try to use a variable, it throws null pointer exception.
  
  Thank you
  KK

  Hello

  Please declare the variable that you would use in the script that is executed, ODI needs its variables are declared explicitly.

  I hope this helps.

  Thank you.

• ORA-16797: database does not use a server parameter file

  I can see newspapers apply pending data. But in the dataguard alter journal generates error ORA-16797: database does not use a server parameter file
  
  Error message in the logfile dataguard
  -----------------------------------
  
  DG 2010-03-23-17: 0 2 714415739 MICHAEL 46:45: GET_DRC finished
  DG 2010-03-23-17: 714415740 3 1000000 MICHAEL 46:45: GET_SITE: success. (len = 464)
  DG 2010-03-23-17: 714415740 3 1000000 MICHAEL 46:45: GET_SITE finished
  DG 2010-03-23-17: 2000000 3 714415741 MICHAEL 46:45: GET_SITE: success. (len = 481)
  DG 2010-03-23-17: 2000000 3 714415741 MICHAEL 46:45: GET_SITE finished
  DG 2010-03-23-17: 0 2 714415742 MICHAEL 46:45: CTL_GET_STATUS sent to the ANZPRD site for treatment
  DG 2010-03-23-17: 0 2 714415742 MICHAEL 46:45: CTL_GET_STATUS finished
  DG 2010-03-23-17: 47:32 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16797: database does not use a server parameter file
  DG 2010-03-23-17: 47:32 0 2 704706097 CTL_GET_STATUS operation cancelled during phase 1, error = ORA-16797
  DG 2010-03-23-17: 47:32 0 2 704706097 CTL_GET_STATUS operation cancelled during phase 1, error = ORA-16797
  
  QL > SELECT MAX(SEQUENCE#), THREAD # V$ ARCHIVED_LOG GROUP THREAD #;
  
  MAX(SEQUENCE#) THREAD #.
  -------------- ----------
  2, 2000
  2060 1
  
  I did the steps
  
  Create spfile pfie
  Shutdown
  Started by spifile
  
  No luck. Journal of applied began. but I see the same error in the datagurd log file

  Here's what it should look like:

  SQL> show parameter pfile
  
  NAME_COL_PLUS_SHOW_PARAM                                                         TYPE
  -------------------------------------------------------------------------------- ------
  VALUE_COL_PLUS_SHOW_PARAM
  ---------------------------------------------------------------------------------------
  spfile                                                                           string
  C:\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEORABASE.ORA
  SQL> 
  

  My guess is that the file is not in the right place. Check the location and your ORACLE_HOME environment variable.

  It should be in $ORACLE_HOME/database for windows, $ORACLE_HOME/dbs for real operating systems.

• How to pass values to a variable of the file.

  Hello
  
  I want to pass values in a variable to a file. For example: I want to divide the records in the source based on the region and load a region at any given time. Is there a way I can tell ODI to load only one region at a time. Currently I think I have a varibale defined, pass the value from a file and use this variable in the source filter.
  
  All answers are appreciated.
  
  Thank you
  CHikk

  Hello

  Right thinking...

  Simply use the following command, to the updating of the ODI variable tab, to get the values directly in the file:

  Select REGION_NAME
  table
  / * $$ SNPS_START_KEYSNP$ CRDWG_TABLESNP$ CRTABLE_NAME = REGIONSNP$ CRLOAD_FILE = <%=odiRef.getSchemaName("D")%> \MY_FILE. TXTSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=09SNP$CRFILE_SEP_LINE=0D0ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=REGION_NAMESNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLINE_OFFSET=1SNP$CRLENGTH=500SNP$CRPRECISION=500SNP$CR$$SNPS_END_KEY*/

  (the command between ' / * ' and ' * / ' must be in a single line)

  Change the 'MyFile' the real file name

  This help you?

• I use numbers to make files, but other people could not open, why?

  I use numbers to make files, but other people could not open, why?

  Hi Annie,.

  Only numbers can open a document in numbers. Excel cannot.

  In addition, there are several versions of numbers that work on a Mac. Older versions will be not open newer versions.

  What version of numbers do you run?

  What applications are the other people running?

  If other people are running Excel, you can export your document numbers to Excel (Menu > file > export to... > Excel). The export will not be perfect, but they will be able to open it and read it.

  More information, will lead to a solution.

  Kind regards

  Ian.

• whenever I type in the google box to search for each letter i firefox type which application I would like to use to open this file, this is so embarrassing, how to stop this?

  whenever I type in the google box to search for each letter i firefox type which application I would like to use to open this file, this is so embarrassing, how to stop this?

  You are welcome

  Can you tell us which extension caused your problem?

• Qosmio F20-155: how to use BT to share files with the mobile phone

  Hello
  I HAVE TOSHIBA QOSMIO F20-155, BUT I DON'T NO HOW TO USE BLUETOOTH TO SHARE FILES WITH MY CELL PHONE
  PLEASE HELP ME

  Hello

  First a simple question: are you sure that your laptop supports Bluetooth?
  AFAIK the Qosmio F20-155 was delivered without the BT module.

  In addition, if you are not sure if the phone has BT then you can check the bottom of the unit. It should be placed a label BT if the Bluetooth has been installed.

• iTunes can't locate my music. When I try to play a song one get an exclamation point and the message "the song could not be used because the original file cannot be found. You want to locate?

  I don't know if I am posting this in the right place. If she must be somewhere else please let me know.

  When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »

  I use Windows 10 and iTunes version 12.3.1.

  It's the path statement where the music is currently located on my hard drive:

  

  If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.

  To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.

  

  Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.

  Thank you!

  Now iCloud is down, if something happens on the end of apples.

• What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Hi all

  I am new to TestStand. Still in the learning process.

  What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Thanks in advance,

  LaVIEWan

  I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

• Media Player error play 3gp: the player might not support the file type or does not support the codec used to compress the file.

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  Windows gives you integrated programs to open the image as png files.

  In Vista, use Windows Photo Gallery to open png files.

  In Windows 7, if you use it, you can use Windows Photo Viewer to open png files.

  If you have installed Windows Live Essentials, you can use Windows live Photo Gallery to open png files.

• How to include a .lvlib in a generation that was created using a custom .dll file

  I am trying to build an executable in LV2010 which uses a .lvlib which was created using a Keyence .dll file. I added the .lvlib to the source as "Still included" files and I also added all the files "Always included." library .vi I always get the error message saying "Lack the external function" during the execution of the program. The executable seems to open properly on the development computer, but not on a secondary computer. Any ideas?

  Hi Harris,

  I would like to clarify a few points.

  -With all these configurations that you described above, the executable file worked properly on the development computer?

  -L'application works correctly on the development computer outside a build specification, just running in LabVIEW?

  -Have you tried to deploy the executable on multiple computers, and you see the same error on every computer other than the development computer?

  -Is there a software that must be installed so that the TMIF.dll to work? This software is installed on the deployment computer?

  It seems that the DLL is included with success, but for some reason, the function appears as missing. Also, I noticed that the error message has a: C at the end of the message, which makes me wonder - is this a C DLL or a Windows DLL (.NET)?

• Can what program I use to open the files PLX?

  Original title: PLX files

  Can what program I use to open the file in a readable format PLX?

  Hi Truman,

  I understand that you want to open the PLX files.

  Executable program written in Perl programming language; often used for Web applications that are running on a Web server. You can open them using the following application.

  Microsoft IIS with PerlIS.

  I hope this helps.

• Error: Windows Media Player cannot play the file. The player can not support the Codec that was used to compress the file, MP3 downloads will not play

  Original title: MP3 downloads don't play no not on WMP

  My Windows Media Player recently stopped playing downloads from Amazon. I've never had this problem before. I installed VLC Player, has not worked... off the WMP in the Windows app, restarted, turned on the back and restarted... did not help. I get the message "Windows Media Player cannot play the file. The player may not support the Codec used to compress the file. This is for multiple downloads, so I don't think they would be all corrupted files.

  Hello
   
  Have you done any software or changes to the material on the computer before this problem?
   
  You mentioned that the files do not play on a third-party player as well. I suggest you to check if the files are corrupt.
   
  Method 1:

  How to Download Codecs automatically in Windows Media for Windows XP player

  http://support.Microsoft.com/kb/291818
   
  Method 2:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992
   
  In addition, run the fixit from the link:
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/
   
  Hope the information is useful.

• When I send pdf files the recipients using aol receive a file "WinMail" they can't open.

  When I send pdf files the recipients using aol receive a file "WinMail" they can't open.

  I have my mail format HTML the value and we tried also plain text without change.

  What email program are you using?

  Assuming that Outlook 2010 or Outlook 2007, try the following article:
  "When you use Outlook 2010 or Outlook 2007 to send an e-mail message, the recipient of the message sees an attachment called Winmail.dat"
    <>http://support.Microsoft.com/kb/958012 >

  HTH,
  JW