UTF-8 vs. ASCII - presentation server problem

Hi all

After using HTTPwatch, the web team has noticed that OBIEE was sending ASCII characters to render the Web page. The web team has suggested that we use UTF8 instead because it will reduce the number of bytes sent.

I tried to figure where this change must be made in OBIEE?

Any ideas as to where I can make this change?

Hello
first of all, I agree with Turribeach, this evolution characters of the Web page seem not to be the right starting point for improving performance.
But I'm curious on this subject and know if it can make a difference, and if it is possible to change this setting.

I found some files that can keep this setting. They are all \OracleBI\web\config and are named:
charactersetdefinitions. XML
devicecharactersetlists. XML
localecharactersetlists. XML
localedefinitions. XML

In localedefinitions.xml, you can set the characterlist for each language.

In localcharactersetlists.xml you can find characters by language games, here you can read:

For en-us is the list:


     
     
     
     
     
     

Then maybe you can put utf - 8 as the first characters in the list. I did not have time to test it, then try it for yourself and share the results. Thank you.

Kind regards
Stijn

Tags: Business Intelligence

Similar Questions

  • Citrix MetaFrame Presentation Server

    What to do for the following message: "your version of Citrix ICA is not compatible with this version of Windows.

    Published content:

    Hello

    The answer for sub questions are the following:

    1. Yes, I faced a problem in my hard desk and I changed it & re.installed Windows 7.
    2. In case of normal use, I click on the launch of Citrix Web Client icon and access to the ERP server but after changing the office hard it is unresponsive and when executing 'Check solutions online', I get this message.
    3. I don't know exactly the version of Citrix ICA because it is installed on the company's server and users access the application after the installation of "Customer MetaFrame Presentation Server (ActiveX) for 32-bit Windows" on the user's PC.

    I hope that the above are useful and I will have soon support

    Note: I tried to get help from www.citrix.com but I could not,

    Thanks & best regards,

    Magdi

    Hi mame,.

    Thank you for the update.

    Note: To avoid confusion, we have removed the duplicate thread. Please try to respond to the current thread, which will help you solve the problem as soon as possible.

    Given that the problem persists, you will need to get in touch with Citrix Support for assistance.

    If your system is connected to a domain, you can also get in touch with the system/network administrator to check the same.

    Hope the helps of information.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • More older Citrix Presentation server ESXi 5

    We have a Citrix server which is currently powered by a hamster peg-legged and held together with duct tape. Cost is a problem, then we got a quote for a decent server that can be extended. We would like to install ESXi 5 and have the Citrix Presentation server on a virtual R2 2003 computer. To save money, they do not want to move to a more recent version of Citrix so we will migrate.

    They currently have Citrix Presentation Server version 4.5. Who will work in ESXi 5 (on a 2003 R2 VM)?

    TIA!

    It will work absolutely - I have several of them works just fine.

  • Can register on EM and Admin Console but not Analytics - down presentation server

    I installed 11G on Windows 7 Enterprise. I am able to sign on Enterprise Manager and the Administration Console but not in analytics.

    The presentation server is down and there is a message in the nqserver.log about a problem with the oracle.bi.security.service. I pasted the nqserver.log and the sawlog0.log file and the file nqsconfig.ini below.

    I checked the BISystemUser into the realms of Weblogic Administration Console/security/myrealm and reset the password.

    I also have to reset the password for BISystemUser in Weblogic Enterprise Manager/WebLogic Domain/Security/Credentials/oracle.bi.system

    Then restarted services.

    I checked to see that there's no lock on DEV_MDS and DEV_BIPLATFORM.

    I tried to restart the services on several occasions without any modification.

    I don't know what else to check or how to proceed. Is there anything else I should check to identify what I might need to the difficulty of obtaining this race?

    Thank you

    Dara

    c:\OBIEE11G\instances\instance2 > opmnctl status

    Process pending: instance2

    ---------------------------------+--------------------+---------+---------

    IAS-component | process type.     The NEST | status

    ---------------------------------+--------------------+---------+---------

    essbasestudio1 | EssbaseStudio |       0 | NONE

    essbaseserver1 | Essbase |     N/A | Down

    coreapplication_obiccs1 | OracleBIClusterCo ~ |    3940 | Alive

    coreapplication_obisch1 | OracleBIScheduler ~ |    7504. Alive

    coreapplication_obijh1 | OracleBIJavaHostC ~ |    7452 | Alive

    coreapplication_obips1 | OracleBIPresentat ~ |     N/A | Down

    coreapplication_obis1 | OracleBIServerCom ~ |    2476 | Alive

    nqserver.log

    [2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [36007] loading repository C:\OBIEE11G\instances\instance2\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\SampleAppLite_BI0018.rpd.

    [2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 169 c] domain [14055] loading: SampleApp Lite...

    [2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 169 c] [14056] done to the sector of activity: SampleApp Lite.

    [2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [58002] Query Cache loaded with 0 entries registered the cache files.

    [2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [85003] MDX member name Cache subsystem has been started successfully.

    [2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [85004] member recovered MDX entered names Cache subsystem: 0, size: 0 bytes.

    [2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] an error message was received by security BI: oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error

    [2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [13026] error getting BI Security Service roles: "' an error message was received by security BI: oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error '"

    [2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [46172] store security database is not available, do not re - associate with this type of provider.

    [2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] nqsserver: started clustered Oracle BI Server (64-bit).  Version: 11.1.1.7.0.

    [2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1fbc] [43071] a connection with THE Cluster controller - 2083841:9706 was created.

    [2013 10-14 T 08: 13:31.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglTjROFW7WFLzqIOA0001qC000000] [tid: f9c] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error

    [2013 10-14 T 08: 13:31.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglTjROFW7WFLzqIOA0001qC000000] [tid: f9c] [nQSError: 43126] failed authentication: invalid user/password.

    [2013 10-14 T 08: 13:39.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmFUwcFW7WFLzqIOA0001Ho000005] [tid: 688] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error

    [2013 10-14 T 08: 13:39.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmFUwcFW7WFLzqIOA0001Ho000005] [tid: 688] [nQSError: 43126] failed authentication: invalid user/password.

    [2013 10-14 T 08: 13:43.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmAz8aFW7WFLzqIOA0001Ho000000] [tid: 153 c] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error

    [2013 10-14 T 08: 13:43.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmAz8aFW7WFLzqIOA0001Ho000000] [tid: 153 c] [nQSError: 43126] failed authentication: invalid user/password.

    sawlog0.log

    [2013 10-14 T 07: 51:52.000 - 07:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services (OBIPS) 11.1.1.7.0 (130303.2025 64-bit Build) start. [[

    Leader: sawserver.cpp

    Online: 455

    Geographical area:

    Saw.sawserver

    Saw.sawserver.initializesawserver

    Saw.sawserver

    ECID:

    ]]

    [2013 10-14 T 07: 51:52.000 - 07:00] [OBIPS] [WARNING: 16] [] [saw.mas.csf] [ecid:] [tid:] store database security is not available, do not re - associate with this type of provider. [[

    Leader: csfwrapperimpl.cpp

    Online: 152

    Geographical area:

    Saw.Mas.CSF

    Saw.sawserver

    Saw.sawserver.initializesawserver

    Saw.sawserver

    ECID:

    ]]

    [2013 10-14 T 07: 51:53.000 - 07:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] security query's timeout is: 120 []

    Leader: odbcuserpoploaderimpl.cpp

    Line: 1068

    Geographical area:

    Saw.sawserver

    Saw.sawserver.initializesawserver

    Saw.sawserver

    ECID:

    ]]

    [2013 10-14 T 07: 51:56.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.webextensionbase.init.workstationCheck] [ecid:] [tid:] WARNING: The Oracle BI Presentation server Services is running on a machine of class workstation (Windows XP Professional, Windows 7 Professional, etc). The number of concurrent users may be severely limited by the operating system. [[

    Leader: webextensionbase.cpp

    Online: 492

    Geographical area:

    saw.webextensionbase.init.workstationCheck

    Saw.webextensionbase.init

    Saw.sawserver

    Saw.sawserver.initializesawserver

    Saw.sawserver

    ECID:

    ]]

    [2013 10-14 T 07: 51:56.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.local.checkforcatalogupgrade] [ecid:] [tid:] update is recommended in the latest version of the catalog. [[

    Leader: localwebcatalog.cpp

    Online: 242

    Geographical area:

    Saw.Catalog.local.checkforcatalogupgrade

    saw.catalog.local.loadCatalog

    Saw.Subsystems.catalogbootstrapper.loadcatalog

    Saw.webextensionbase.init

    Saw.sawserver

    Saw.sawserver.initializesawserver

    Saw.sawserver

    ECID:

    NQSConfig.INI

    ###############################################################################

    #

    # NQSConfig.INI

    #

    # Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.

    #

    # INI file parser rules are:

    # If the values are in literals, numbers, or _, they may be

    # given as such. If the values contain characters other than

    literals #, numbers or _, the values must be in quotes.

    #

    ###############################################################################

    ###############################################################################

    #

    # Article repository

    #

    # Repositories are defined as the name of the logical repository - file name

    pairs of #.  ODBC drivers use names of logical repository defined in this

    # section.

    #

    # All repositories must reside within the Oracle BI Server instance

    Directory of repository #.

    #

    ###############################################################################

    [REPOSITORY]

    Star = SampleAppLite_BI0018.rpd, default value;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    ###############################################################################

    #

    # Query result Cache Section

    #

    ###############################################################################

    [CACHE]

    ACTIVATE = YES;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    # A list separated by commas of the < maxSize directory > pairs.

    # They are relative to the directory of the process instance.

    # e.g. DATA_STORAGE_PATHS = "nQSCache" 500 MB;

    # resolves to

    # $(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / nQSCache

    DATA_STORAGE_PATHS = "cache" 500 MB;

    MAX_ROWS_PER_CACHE_ENTRY = 100000;  # 0 is an unlimited size

    MAX_CACHE_ENTRY_SIZE = 20 MB;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    MAX_CACHE_ENTRIES = 1000;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    POPULATE_AGGREGATE_ROLLUP_HITS = NO;

    USE_ADVANCED_HIT_DETECTION = NO;

    MAX_SUBEXPR_SEARCH_DEPTH = 7;

    DISABLE_SUBREQUEST_CACHING = NO;

    #Cache the size of the file buffer. Default is 128 KB

    CACHE_FILE_BUFFER_SIZE = 128 KB;

    # Cluster cache.

    # Note that, since it is a network share, the directory should not be

    # relative.

    GLOBAL_CACHE_STORAGE_PATH = "' 0 MB;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    MAX_GLOBAL_CACHE_ENTRIES = 1000;

    CACHE_POLL_SECONDS = 300;

    CLUSTER_AWARE_CACHE_LOGGING = NO;

    ###############################################################################

    #

    # General section

    #

    # Contains general settings of the default server location

    # and internationalization, temporary space and memory, allocation

    # and other default parameters used to determine how data is returned

    # from the server to a client.

    #

    ###############################################################################

    [GENERAL]

    # Localization/internationalization settings.

    LOCAL = "English - United States";

    SORT_ORDER_LOCALE = "English - United States";

    SORT_TYPE = "binary";

    # Case must be adjusted with the remote control

    target database of the #.

    CASE_SENSITIVE_CHARACTER_COMPARISON = ON;

    # SQLServer65 sorts NULL values first, while Oracle sorts

    # nulls last. This property of ini file must conform to the

    # of the remote target database, if there is a

    # unique remote database. Otherwise, choose the command

    # that corresponds to the database (i.e. the)

    # based on the volume of data, frequency of access, sorting

    # bandwidth performance).

    NULL_VALUES_SORT_FIRST = OFF;

    DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh ';

    DATE_DISPLAY_FORMAT = "yyyy/mm/dd";

    TIME_DISPLAY_FORMAT = "hh."

    # Allocation of temporary space, memory and resources

    # parameters.

    # You can use KB, MB for memory size.

    # Working directory paths can be left empty and default

    # for the temp of the process instance directory.  For example,.

    # $(ORACLE_INSTANCE) / temp/OracleBIServerComponent / < InstanceName >.

    # If it is relative, it will be compared to this path.  So absolute.

    # We take the absolute path when running.

    WORK_DIRECTORY_PATHS = "";

    VIRTUAL_TABLE_PAGE_SIZE = 128 KB;

    # Analytics Server returns all month names and day three

    abbreviations # (for example, "Jan", "Feb", "Sat", "Sun").

    # To use full names, set the following values to YES.

    USE_LONG_MONTH_NAMES = NO;

    USE_LONG_DAY_NAMES = NO;

    USE_UPPERCASE_MONTH_NAMES = NO;

    USE_UPPERCASE_DAY_NAMES = NO;

    UPPERCASE_USERNAME_FOR_INITBLOCK = NO;  # default is none

    ###############################################################################

    #

    # Security section

    #

    # The legal value for DEFAULT_PRIVILEGES are:

    # NO READ

    #

    ###############################################################################

    [SECURITY]

    DEFAULT_PRIVILEGES = READ;

    PROJECT_INACCESSIBLE_COLUMN_AS_NULL = YES;  # default is none

    # Note that the below paths must be relative to the instance

    directories of config # if specified.  for example,.

    # $(ORACLE_INSTANCE) / config/OracleBIServerComponent / < InstanceName >

    #IGNORE_LDAP_PWD_EXPIRY_WARNING = NO;     default value is none.

    SSL = NO;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    SSL_CERTIFICATE_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\server-cert.PEM ';  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    SSL_PRIVATE_KEY_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\server-key.PEM ';  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    SSL_VERIFY_SERVERS = YES;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    SSL_VERIFY_CLIENTS = NO;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    SSL_CA_CERTIFICATE_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\combinedcacert.PEM ';  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    SSL_TRUSTED_PEER_DNS ="";

    SSL_CERT_VERIFICATION_DEPTH = 9;

    SSL_CIPHER_LIST ="";

    ###############################################################################

    #

    # Server section

    #

    ###############################################################################

    [SERVER]

    READ_ONLY_MODE = NO;  # It is both online and offline - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    MAX_SESSION_LIMIT = 2000;

    MAX_REQUEST_PER_SESSION_LIMIT = 5000;

    SERVER_THREAD_RANGE = 40-100;

    SERVER_THREAD_STACK_SIZE = 0;  # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),

    DB_GATEWAY_THREAD_RANGE = 40-200;

    DB_GATEWAY_THREAD_STACK_SIZE = 0;  # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),

    HTTP_CLIENT_THREAD_RANGE = 0-100;

    HTTP_CLIENT_THREAD_STACK_SIZE = 0;  # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),

    MAX_EXPANDED_SUBQUERY_PREDICATES = 8192;  # default is 8192

    MAX_QUERY_PLAN_CACHE_ENTRIES = 1024;  # default is 1024

    MAX_QUERY_PLAN_CACHE_ENTRY_SIZE = 0;  # default is 256 KB, (in 32-BIT mode), 1 MB (64-bit), the default value to 0

    MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024;  # default is 1024

    MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024;  # default is 1024

    INIT_BLOCK_CACHE_ENTRIES = 20;  # default is 20

    CLIENT_MGMT_THREADS_MAX = 5;  # default is 5

    # This specifies the port number and IP that the server will be

    # listen to. When it is set to 0.0.0.0, the server listens on all IPs

    # address on the machine, otherwise the server will bind to the

    # specified ip address.

    RPC_SERVICE_OR_PORT = "9703;  # default is 0.0.0.0:9703 - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    LISTEN_ADDRESS = "0.0.0.0";  # default is 0.0.0.0

    LISTEN_PORT = 9703;  # default is 9703

    ENABLE_DB_HINTS = YES;  # default is Yes

    PREVENT_DIVIDE_BY_ZERO = YES;

    CLUSTER_PARTICIPANT = YES;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    # Suite required if CLUSTER_PARTICIPANT = YES

    # The directory of publication must be a full path as it should

    # a shared drive.

    REQUIRE_PUBLISHING_DIRECTORY = NO;  # Do not join the cluster if the directory is not accessible - Configuration of this setting is managed by Oracle Enterprise Manager Fusion Middleware control

    DISCONNECTED = NO;

    AUTOMATIC_RESTART = YES;

    VARIABLE_VALUE_LIMIT = 4096;

    # EVALUATE_SUPPORT_LEVEL:

    # 1: evaluate is supported for users with the permission of manageRepositories

    # 2: evaluate is supported for all users.

    # other: assess only is not supported if the value is something else.

    EVALUATE_SUPPORT_LEVEL = 0;

    FMW_SECURITY_SERVICE_URL = " " http://131.216.37.7:7001 ";  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    FMW_SECURITY_SERVICE_MAX_NUMBER_OF_CONNECTIONS = 2000;

    FMW_SECURITY_SERVICE_MAX_NUMBER_OF_RETRIES = 0;

    # FMW_SECURITY_SERVICE_RETRY_EXCEPTION_SUBSTRING = "closed by force."

    FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = NO;

    # ENABLE_NUMERIC_DATA_TYPE:

    # When this setting is enabled, the Administration tool will be

    # import, data type Oracle/TimesTen number as the type of digital data in physics

    column definition #.  Oracle BI Server will interpret the Oracle Number data

    # type in the form of digital data internally during its execution.

    ENABLE_NUMERIC_DATA_TYPE = NO;

    MONITOR_PORT = "9701;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    ORACLEHARDWAREACCELERATION = NO;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    ###############################################################################

    #

    Article # high availability

    #

    ###############################################################################

    [HIGH_AVAILABILITY]

    HA_DB_PING_PERIOD_MILLISECS = 60000;

    ###############################################################################

    #

    # Dynamic library section

    #

    # Dynamic libraries specified in this section

    # are classified by the CLI, they take over.

    #

    ###############################################################################

    [DB_DYNAMIC_LIBRARY]

    ODBC200 = nqsdbgatewayodbc;

    ODBC350 = nqsdbgatewayodbc35;

    Oci8 = nqsdbgatewayoci8;

    OCI8i = nqsdbgatewayoci8i;

    OCI10g = nqsdbgatewayoci10g;

    DB2CLI = nqsdbgatewaydb2cli;

    DB2CLI35 = nqsdbgatewaydb2cli35;

    NQSXML = nqsdbgatewayxml;

    XMLA = nqsdbgatewayxmla;

    BAPI = nqsdbgatewaysapbapi;

    ESSBASE = nqsdbgatewayessbasecapi;

    OracleADF = nqsdbgatewayoracleadf;

    OracleADF_HTTP = nqsdbgatewayoracleadf;

    OracleCEP_HTTP = nqsdbgatewayoraclecep;

    HyperionADM = nqsdbgatewayadm;

    OracleWS = nqsdbgatewayoraclews;

    Hadoop = nqsdbgatewayhadoop;

    TimesTen = nqsdbgatewaytimesten;

    timesten35 = nqsdbgatewaytimesten35;

    ###############################################################################

    #

    # Section monitoring of use

    #

    # Collect usage on each logical query statistics submitted to the

    # Server.

    #

    ###############################################################################

    [USAGE_TRACKING]

    ACTIVATE = NO;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    #==============================================================================

    # Parameters used to write the data to a flat file (e.g., DIRECT_INSERT = NO).

    #

    # Note that the directory must be relative to the directory of the instance.

    # In general, we prefer directo insert flat files.  If you work in

    # a cluster, it is recommended that you use direct insertion.  If there is

    a single instance Oracle BI Server #, then you can use data from flat files.

    # The directory is assumed from the process instance.  For

    example #, "UTData" is resolved to

    # "$(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / UTData.

    STORAGE_DIRECTORY = 'path to the <>directory ";

    CHECKPOINT_INTERVAL_MINUTES = 5;

    FILE_ROLLOVER_INTERVAL_MINUTES = 30;

    CODE_PAGE = 'ANSI ';  # ANSI, UTF8, 1252, etc..

    #

    #==============================================================================

    DIRECT_INSERT = YES;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    #==============================================================================

    # Parameters to insert data in a table (for example DIRECT_INSERT = YES).

    #

    PHYSICAL_TABLE_NAME = "<>database". "' Catalogue of <>. "" schema of <>. "< table > ';  # Or "<>database". "" schema of <>. "" < table > "; -This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    CONNECTION_POOL = "<>database". "<>Connection pool ';  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    BUFFER_SIZE = 250 MB;

    BUFFER_TIME_LIMIT_SECONDS = 5;

    NUM_INSERT_THREADS = 5;

    MAX_INSERTS_PER_TRANSACTION = 1;

    #

    #==============================================================================

    SUMMARY_STATISTICS_LOGGING = NO;  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    SUMMARY_ADVISOR_TABLE_NAME = "<>database". "' Catalogue of <>. "" schema of <>. "< table > ';  # Or "<>database". "" schema of <>. "" < table > "; -This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    ###############################################################################

    #

    # Query optimization flags

    #

    ###############################################################################

    [OPTIMIZATION_FLAGS]

    STRONG_DATETIME_TYPE_CHECKING = ON;

    ###############################################################################

    #

    # MDX member name Section Cache

    #

    # Subsystem of cache for the mapping between the unique name and the legend of

    number of members of all SAP/BW cubes in the repository.

    #

    ###############################################################################

    [MDX_MEMBER_CACHE]

    # The entry to indicate that if the feature is enabled or not, by default, NO because it applies only to the SAP/BW cubes

    ACTIVATE = YES;

    # The path to the location where the cache is persisted, applies to one place.

    # the number at the end indicates the storage capacity. When the feature is activated,

    # administrator must replace the "< directory path >" with a valid path.

    # This cache will be relative to the directory of the process instance data.  For

    example: #

    # DATA_STORAGE_PATH = "MDXCache" 500 MB;

    # resolves to:

    # $(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / MDXCache

    DATA_STORAGE_PATH is "MDXCache" 500 MB.;

    # Space maximum allowed for each user.

    MAX_SIZE_PER_USER = 100 MB;

    # Number of members in a level can be kept on the disk

    MAX_MEMBER_PER_LEVEL = 1000;

    # Maximum size for each individual cache entry size

    MAX_CACHE_SIZE = 100 MB;

    ###############################################################################

    #

    # Section aggregation persistence

    #

    ###############################################################################

    [AGGREGATE_PERSISTENCE]

    # Persistence default aggregation

    # The prefix must be between 1 and 8 characters

    # and should not have special characters ('_' is allowed).

    AGGREGATE_PREFIX = "SA_;

    AGGREGATE_THREAD_POOL_SIZE = 5;

    AGGREGATE_AW_NAME = "OBI_AW";

    PREAGGREGATE_AW_CUBE = YES;

    ###############################################################################

    #

    # Section Javahost

    #

    ###############################################################################

    [JAVAHOST]

    JAVAHOST_HOSTNAME_OR_IP_ADDRESSES = "AI - 2083841:9810";  # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control

    #JAVAHOST_HOSTNAME_OR_IP_ADDRESSES = '< machine-name1 >': < port_number1 >, < machine-name2 >: < port_number2 >;

    ###############################################################################

    #

    # Section Datamart Automation

    #

    ###############################################################################

    [DATAMART_AUTOMATION]

    ' ESSBASE_STUDIO_URL = ' http://localhost:9080/dma/dmaservlet "; 

    ESSBASE_SERVER = "localhost";

    DMA_DATABASE = "DMA_DB";

    Intresting...

    I recommend you go through the below article

    Rittman Mead Consulting & raquo; Blog Archive & raquo; OBIEE / FMW and networking on the DHCP hosts

    Thank you

    Angelique

  • Server problem?  Cannot access our rooms to the United Kingdom

    We are unable to access one of our Acrobat Connect Pro rooms to the United Kingdom.  Simply, we get a blue bar hanging saying 'sign in' whatever the location, browser, pc etc etc.  Not even through iPad can access us.  Since at 0850 am hour British.

    Also, we cannot access recorded sessions, but we can get into our dashboard general Adobe Connect.

    Cannot access the content downloaded in our shared content. Once you click on the URL for it, it freezes / or shows no connection.

    Can anyone help?  Trying to contact the Support of Adobe Connect is a hideous job.

    Matt

    PS: It's interesting because I'm writing a presentation I'm doing for the eLearning Show Thursday, which is run by learning UK & Performance Institute.  I wonder what I will eventually talk...

    The server problem has been identified and fixed. The system is stable now. Let us know if you encounter any problem.

    We apologize for the inconvenience.

    Thank you

    Ashwani

    Acrobat Connect Pro Support Team

  • iBot errors: Oracle BI presentation server error: access denied

    Hi all
    I'm trying to configure the iBot for the first time in our dev instance.
    I get the error next can someone ' a please guide me to solve this problem. I login as an administrator during the creation of the iBot.

    pointers are highly appreciated.

    Thank you
    Vijay


    +++ ThreadID: 70 c: 16:46:13.583 2011-06-08
    [nQSError: 77006] Oracle BI presentation server error: access denied.
    Error codes: OKZJNLK4



    +++ ThreadID: 70 c: 16:46:13.583 2011-06-08
    iBotID: / users/administrator/_ibots/test
    ... Retry loop main iBot.

    +++ ThreadID: 70 c: 16:46:13.583 2011-06-08
    ... Sleep for 5 seconds.

    +++ ThreadID: 70 c: 16:46:18.583 2011-06-08
    [nQSError: 77006] Oracle BI presentation server error: access denied.
    Error codes: OKZJNLK4



    +++ ThreadID: 70 c: 16:46:18.583 2011-06-08
    iBotID: / users/administrator/_ibots/test
    ... Retry loop main iBot.

    +++ ThreadID: 70 c: 16:46:18.583 2011-06-08
    ... Sleep for 8 seconds.

    +++ ThreadID: 70 c: 16:46:26.583 2011-06-08
    [nQSError: 77006] Oracle BI presentation server error: access denied.
    Error codes: OKZJNLK4



    +++ ThreadID: 70 c: 16:46:26.583 2011-06-08
    iBotID: / users/administrator/_ibots/test
    Exceeded number of retries of request.

    Assign Points if answered your query, Mark also question as answered...

    See you soon
    Ankit

  • Creating user in the repository and Presentation Server

    Hello

    I created for OBIEE users in the administration tool, but I don't see users in the list when I want to add to a group on the presentation server. First of all, I need to log on to the server of presentation with this user to be able to add it to a group. The problem is that I have 150 users and I do not intend to log 150 times.

    Is there an easier way to do this?

    Kind regards

    Osman

    Hi Osman,

    strange error message, I have no idea why get you. You rebooted the Oracle BI server and presentation?

    Kind regards
    Stijn

  • changed Kapersky security with mcafee and cannot retrieve e-mail messages. problems of server on the computer. McAfee can enter my password and my email. they say that I have a server problem.

    changed to mcafee kapersky and cannot receive my e-mail address. McAfee can use my username and password and receive my email. they say that I have a server problem.

    Hello

    I suspect that the problem is with your e-mail service provider, therefore, suggest you to contact your provider of messaging for better help.

  • Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

    Original title: Windows XP and Outlook Express 6

    I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

    "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

    How can I fix this error message and have e-mail sent via Outlook?

    Hi Jeanette Logan,
     
    Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
     

  • Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

    You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

    Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

    t-4-2

  • launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

    Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

    Original title: launch of the problems of checkers:

    Hello

    If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

    Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

    Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

    IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  • Try to create the new account. Message: Server problems! Since 2 days. Who can help?

    Bought the new printer (Photosmart C410b) HP with ePrint option.

    Try to create a new account in eprintcenter.com to save my printer

    to use ePrint. Get a similar message for 2 days:

    "Sorry, we have server problems. We noticed the problem and will come up with a solution.

    I use the German Web site. Is there really a problem since 2 days or is there a any error on my part?

    Who can help?

    Paschahelen

    Problem solved! Found the solution by checking German blogs with the same question.

    System doesn´t accept "Umlaute" (Aug), which are common in European languages.

  • Server problems

    Hello everyone,

    I have problems connecting to the server. I recently downloaded Microsoft Office 365, and I have the product installed on my computer. However, when I click on the ""Sign in"button in the upper right corner of Microsoft Word (Excel, Powerpoint) it sends a message saying"Sorry, we have temporary server problems."" At first I thought the problem was just of Microsoft Office, but now, I've seen other products I was installing have said similar things such as "cannot connect to Server", "is there a problem with your connection", or 'server '.

    I have wifi and there are always 4-5 bars in the lower right corner, and I am able to use the internet browser (I use it as I type this). The first thing I looked at was the server information. Most of the information went over my head, because I am a novice at this stuff, but the essential, that they mentioned was to connect the clock of the internet via the control panel. I did and I still have these server problems. Another thing to check, I saw was the bing via the command prompt. I tried and it said 0% loss (4 envoys and 4 received) and server problems have continued.

    I have a Windows 7 Inspiron 537 s, and my internet is provided by AT & T.

    This office has been mainly sitting back where it has not been used much (my brother and I used sporadically). I decided to move instead of easier access, because it's a good computer.

    The main culprit, I can think of is the wireless network adapter I bought, so this computer is Wi-Fi (instead of an Ethernet cable on the floor), but like I said that the computer has a strong wifi connection. The adapter is a Netgear AC1200.

    No other devices on my network are facing this problem, it's just this office.

    So, just a little recap

    1. I have a wifi connection, and I am able to use internet browsers and download files.
    2. I can't connect to the "servers", such as Microsoft Office.

    Any help would be appreciated, because I can't seem to find someone with a similar problem on the internet.

    This is a link to where I posted this question in the Forum Office (Accident, I didn't see it), where a person tried to help me and there is a little more information. Aid has led to post me here, and the guest in this thread is the same as exact as this thread.

    http://answers.Microsoft.com/en-us/Office/Forum/office_365hp-office_install/server-problems/e8fdace1-4CEC-4B36-95a8-8508dc90af45

    Hello

    Thanks for posting your query on Microsoft Community forum.

    According to the description of the problem, it seems that there could be a chance of third-party applications, services or security software are limiting to connect.

    So I would you suggest temporarily disabling security software and perform the clean boot and then try to sign in to Office 365 and see if it helps.

    Step 1

    Try temporarily disabling security software and then see if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

    Step 2

    Perform a clean boot.

    Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

    In addition to that I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

    Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    1. Go to Start, click all programs and open the Accessories.
    2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
    3. In the command prompt, type the following command and press ENTER:

    sfc/scannow

    For more information, refer to this link:

    http://support.Microsoft.com/kb/929833/en-us

    Hope it would help. If the problem still persists, post back with the current state of your computer and the result of the suggestions, we will be happy to help you.

    Kind regards

  • I can't access a site because of server problems. I don't know anything about. can someone help me?:

    I am just by clicking a link and when I do I get a server problem. I do not know where to go to from there.

    Hello Sharon,

    Please answer these questions to identify the problem.

    1. what link you are talking about when you say "by clicking on a link?

    2. What is the exact error message received when you say "do a server problem?

    3. how you try to access the link?

    4. what version of web browser work?

    5 a it works much earlier?

    Please post with the required information so that we can help you further.

  • Windows Live Mail send any emails. "Your server has terminated suddenly the connection. The possible causes for this include server problems. »

    original title: live mail not sending

    My windows live mail 7 stopped sending a reason any.  It has worked very well.  It receives mail ok.

    Whenever I try to send an email I get the following error

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

    Topic 'task on cognition.
    Server: 'smtp.tiscali.co.uk '.
    Windows Live Mail error ID: 0x800CCC0F
    Protocol: SMTP
    Port: 25
    Secure (SSL): No.

    Any help appreciated.

    It can be something as simple as turning off email in your anti-virus program that is unnecessary and can cause this. However, if it does not, ask the experts in this forum. Here, few people use this e-mail program.

    Windows Live Mail Forum
    http://windowslivehelp.com/forums.aspx?ProductID=15

Maybe you are looking for