Utility standby power works don't not/can not uninstall

Similar Questions

• Customer light HP t5325 doesn't work don't not with VMware View 5

  Hello

  I recently got a slim Pro HP t5325 customer for testing with VMware view 5. I ve the thin client to the latest firmware update:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4063703 & prodNameId = 4063704 & swEnvOID = 4030 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-99080-1)

  who has the view 4.6 customer and according to the VMware compatibility list:

  http://www.VMware.com/resources/compatibility/PDF/vi_view_guide.PDF

  It should work with view 5. But when I try to launch the client and connect to your desktop from view, he asks just a super quick message (which I don't see) and then it brands the "active" session, but it doesn't open anything . View 5 Client on my laptop works very well and I m able to access the same desktop VM.

  My current setup is:

  • vCenter server 5
  • ESXi5
  • VMware View 5

  What Miss me? Any help would be appreciated.

  Thank you!

  David

  Hello

  I had the same problem this week. He is not related to view 5, same problem exists also with 4.6.

  The problem seems to be that when you try to open the connection, the client calls a /usr/bin/view_wrapper.sh script and this script does NOT run with user privileges? However, if you switch to admin and then open the connection this script works well. You can test it by opening the X terminal in the thin client, then the su user and try to run the script manually /usr/bin/view_wrapper.sh start at 0 and you will get a prompt for sudo.

  I tried to add the useraccount 'user' in/etc/sudoers and allow that user rights sudo for view_client and view_wrapper.sh programs. Did not help

  If you add the user 'user' to the root group, connection opens fine but then you let the open thin client for the standard user to mess with.

  Quite a bug in the software? They don't do any test before releasing these?

• Dell OMSA GUI reference works don't not with 6.4 CentOS 64 bit

  Hello

  I am trying to install the DELL OMSA on my Dell Poweredge 1950 with no luck setting the GUI part on the server, so I can use the link "https://localhost:1311" in all of our business network.

  The problem is that I've done the following to at least be able to use the CLI portion only:

  http://www.md3v.com/install-Dell-OpenManage-on-CentOS-6-4

  It is a very useful script that I found online to allow at least the installation works fine. I can't access the web interface, it continues to tell me Elinks or any external browser "unable to access".

  I also have openssl installed with wget and perl. I don't know what keeps me to get the portion of browser to work. Please help!

  Here are the currently used version of CentOS kernel:

  CentOS 2.6.32 - 358.el6.x86_64

  Thank you.

  Hello

  What version of OMSA are you using? Sometimes the older versions work better on the older hardware. What does
  

  srvadmin-services.sh status
  

  show? You may also want to try adding a non-root user to /opt/dell/srvadmin/etc/omarolemap
  

• Nothing I find works, don't not even your solutions, I wan't to restore my page of the tab back to "on: newtab ' but I can't, even when I go in" subject: config.

  Everything I try does not help, when I press the new tab button it always shows the "AVG safe Search" page, without worrying if I'm going in: config and change browser.newtab.url or whatever he is called back to the default value. I used the thing to restore research as well. nothing works. Can I change my homepage, but I do not honestly what is my homepage, I want my new page of the tab back to normal. The only thing I thought that work was a message that appeared in the corner saying "Restore default new tab page" I have until it clicks, translating the french text block, agree and then open a new browser and a new tab to see if it worked. It does not work. I don't know what to do, I want the page default new tab back.

  You can disable any extension on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, enabled extensions are listed alphabetically, with extensions disabled downstairs.

  Often, a link will appear above when you disable an extension to restart Firefox. If you disable multiple extensions, you can complete your work on the tab and click one of the links in the last step.

  Is that what helps you regain control of your new tab page?

• Two problem possibly - fold problem with messenger work don't not and will not install error 80070643 - is it because I have WINDOWS UPDATE message can not

  OK, I am a novice computer, I press the button and sail away.

  Recently, MSN Messenger would not connect, it says that I need to install a new version and wouldn't let me use the old version.  When you try to install via Windows Live, he just won't do it and install error 80070643.

  HE MAKES ME BANANA!  Me and my family do not have access to Messenger and I'm getting a lot of earache thereon.

  I did some digging and follow some instructions on using Windows Me was updated via Notepad "Logging on - record entered ' the instructions told me to try again and the registry error messages, but I just get the same message.

  I think that I was invited I then started to investigate windows update, often, I get the message that the message "Windows cannot check for updates", my last update recorded is on 12/02/2008 (eek) (English date, so December).

  I have VISTA and uses a COMPAQ laptop.

  Can someone (in non-informatiques talk) give me advice... Please?

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.live.Messenger

  Discussions in Windows Live Messenger

  They will help you with your WLM questions in the Newsgroup for Windows Live Messenger above.

  See you soon. Mick Murphy - Microsoft partner

• Photoshop touch PaintFX paint tool doesn't work don't not on iPad at all can help you

  Brush painting effect tool does not not on iPad.

  I cannot use this tool to take shelter in pencil t... I used to be able to do it, but now it just seems to cover the whole image in fact pencil because I only want to be part of the picture of the effects of pencil... I use an iPad with the latest version of iOS and Photoshop.touch...

  I have the latest iOS and the last photoshop...

  Adobe can you please correct that everyone can check and see if it is affected in the iPad...

  An idea that I'm something wrong... Can someone tell me...

  Ok

  How many layers you have btw?

  Have you checked the settings of the brush, opacity, size, for example?

  Exactly which version of iOS that you use?

  Have you tried to quit all other running applications, and then restart the device or the app?

  It may be that his reason is low on resources if it is not a thing of the brush.

  Thank you

  Ignacio

• Satellite Pro L20: Need utility standby power

  Please can you let me know where I can download the utility Power Saver for a Satellite Pro L20?
  I tried to install a copy of the software, but don't know if it's for a L20 as it crashes
  at the end of the installation, and when I try to open Toshiba Power Saver in the Control Panel, it is said
  It is not run, but there is no option in the list of eating patterns.

  Thank you very much

  Martin Richard Dawkins

  Have you checked own page driver Toshiba?

• Wake on LAN doesn't work don't not on my 8.1 Windows R7

  I can't get my R7 running Windows 8.1 to wake up from sleep with a WoL «Magic Packet» State I use a Plugable USB2 (6 AX88178/Realtek RTL8211CL) ethernet adapter. I have six other PCs on my home network, all running Windows 7, and WoL works very well on all of them.

  I activated the WoL function in the bios of R7 and the device settings for the NIC Plugable (for which I have downloaded the latest drivers from Plugable), and I tried to wake up the R7 with the QuickStart feature, on and outside. The R7 is lying just through it all.

  Any suggestions?

  vvprad, thanks for your response. But note that if you uncheck the 'disable', the 'magical' 'waking up' boxes and as the two gray outside. Apparently, let the PC to disable the NETWORK adapter in order to have the rest of the NIC in the PC. Makes no sense, but it's the way Win7 Win8 do.

  Anyway, I tested my NIC USB on your laptop Dell Win7. WoL did not work it either until I enabled wake USB in the bios. So if you use a USB NIC, to look for the right settings for the NETWORK card and USB. As you suggest with the suggestion of USB power setting.

  But here's the gist: I unplugged the NIC port USB3 on my R7 and connected to the USB2 port and WoL woke up. The USB NIC did everything perfectly using the port USB3, but not of WoL.

• Mute turns do not Off / Audio doesn't work don't not since the last update of Windows 8?

  I don't know if it is caused by the update of Windows 8 for a few days, but the problem started around then.

  The audio on my laptop does not work. The 'secret' remains switched on, even when I press the physical keyboard button to activate the sound and try to activate the sound with my mouse in the menu volume. Nothing to audio.

  Laptop is a HP Pavilion dv6 Notebook PC running Windows 8 Pro 64 - Bit.

  I've seen other people mention a problem like that recently. Any help would be appreciated.

  Hello world

  There are a few troubleshooting you can do for this issue and a work around. One of my colleagues has posted the troubleshooting steps and work autour from here.

  Thank you

• Re: NB100 - sound does not work [workarounds don't work don't not ethier!]

  Hello
  I recently got myself one of these notebooks, being a windows user and not ubuntu, I decided to update instantly all the features by using the Update Manager.

  This however seems to have killed the sound now, I tried almost everything that was found using google search to get my sound back, however I had no joy.

  I even tried to use popular workaround as copied below
  Hello.
  Anyone who has lost the sound on their notebook can recover missing drivers by entering the following information.

  + Break. +

  + Input terminal.

  + Type sudo mv/lib/modules/2.6.24-19-lpia/updates/sound~/sound+

  + press enter +.

  + password +.

  + press enter +.

  + Type sudo depmod-a +.

  + Press entrance cut Notepad then restart +.

  + good will now be back with you.

  + fun people any probs mail me or enter post and ill do my best. +

  but still no solution. It returns an error saying the files are not.

  Any help at all?

  Thank you very much

  Craig

  It would help if someone downloaded their drivers audio nb100 working and I installed them?

• Scan to PDF doesn't work don't not with J4680 all-in-One

  I can't get the scan to searchable PDF (PDF and PDF) file to work as expected with my new J4680.

  It works very well with other formats (TIF, JPG, etc.), but not with the PDF.

  It scans well request for additional pages correctly, and then try to create the PDF file. This is the process fails.

  An empty PDF file (size 0) is created and it fails with an error message:

  unexpected error, click OK to close the program, and perform the following steps:

  -Restart the program; -start the computer and try again. -Reinstall the software and try again

  8, [(6, 261,-2147417851)]

  (freely translated from the German - except for the error number ;-)

  Of course, none of the suggestions above, or any combination of these, or restart the printer works. Any ideas?

  Thanks, the problem is resolved for now.

  Suppot of HP was somehow in the right direction. I uninstalled the drivers all (!) of the 'old' hardware HP (6110 OfficeJect, ScanJet,...), reinstalled the J4680 completely and from there everything worked.

  Internal error (WIN XP) seems to be related to a conflict with older drivers.

  I hope this help if someone having similar problems.

  Thanks again,

  Alex

• I get the message ieframe.dll unresponsive and then internet also said Internet Explorer doesn't work don't not again and again > how to fix this.

  When I received the message on the screen ieframe.dll does not also Internet Explorer announcement that is not responing. I don't have any idea how to solve this problem, or why it happened. Can someone help me?

  Hello

  You use Internet Explorer to surf the internet?

  Follow the steps below and check if that helps

  Method 1:

  I suggest you to optimize IE using the steps below.

  updated 1: clear cached data in Internet Explorer

  1. open Internet Explorer 8.

  2. click Security and then click on delete browsing history.

  3. to remove the historical area of navigation, click on delete.

  2: reset the security settings for Internet Explorer

  1. open Internet Explorer.

  2. click on tools and then click Internet Options.

  3. click on the Security tab.

  4. click on restore all areas by default level, and then click OK.

  For more information visit: How to optimize Internet Explorer
  http://support.Microsoft.com/default.aspx/KB/936213

  Note: Resetting the Internet Explorer will change all of the settings that you made earlier, and it cannot be reversed.

• HEADSET DOESN'T WORK DON'T NOT :(

  I have a HP Pavilion TouchSmart 10 10-e004au Notebook PC. Whenever I plug my headphones sound speakers instead of headphones. my computer does not even respond when I plug in the headphones. I tried with several Different headphones, and it still does not work. I don't know if there is something wrong with my computer or I have to download a software to do its job. I have had this problem since I bought my laptop. Help, please

  Hello Renee19,

  I see you have a problem with the sound from the headset. I'll try to help you with this problem.

  Try different headphones you mention. Have you tried USB as well as that use the socket? This would help to test the equipment, it could be the headphone jack, which is the issue.

  I also recommend looking threw this document:
      Solving Audio problems with speakers external, headphone and HDMI Sound Devices.
  Also this:
      No sound from speakers (Windows 8)

  I would like to know how everything goes.
  Thanks for posting on the HP Forums.

• Wake on LAN doesn't work don't not on Optiplex 9020

  I'm not able to get the Wake on LAN to work on an Optiplex 9020 (small footprint).  I have the following BIOS settings to the title of power management:
  -Control deep sleep-> disabled - Wake on LAN-> LAN only
  -Block-> block (State S3) sleep sleep

  I have the following settings for the card Ethernet Intel I217-LM:
  -Wake on Magic Packet from power off State-> Enabled
  -Wake on magic packet - > enabled
  -Active sleep on model matching->

  When the computer is turned off, the network adapter has NO of LIGHTS.  Does that mean than the Wake on LAN is not configured correctly?  Which setting I'm missing?

  In case this is relevant: Windows 7 Pro 64 bit.
  Thank you.
  Jerry

  I installed A07 and WOL works now.

• ToolTip works don't not in MAC and HTML5 Audio tags works do not correctly in Premiere Pro < 9.2

  Hi all

  ToolTips do not work in any version of Premiere pro panels under Mac. We ask a web page aspx inside an iframe with nodejs-disabled = "true" parameter

  A tool tip feature works in windows environment.

  The HTML5 audio tag also seek bar is come in first pro versions < 9.2

  

  You can give your valuable comments to solve this problem.

  Thank you and best regards,

  ANOOP NR

  From CEP_6.1_HTML_Extension_Cookbook.pdf:

  "CEP 5.2 supports the HTML title attribute to show the ToolTip on Windows. However, it is not supported on Mac because of rendering out of the screen. The alternative is to use JavaScript instead, please refer to http://www.a2zwebhelp.com/bootstrap-tooltips for good examples. »

  Anoop, send me a snippet that reproduces the audio tag seek bar issue, in a Panel from the body?