UTL_MAIL works do not, but apex_mail... any ideas? (SMTP transient error: 421 Service not available)

Similar Questions

• ORA-29278: SMTP temporary error: 421 Service not available

  Hello
  
  I am struck intermittently

  ORA-29278: SMTP transient error: 421 Service not available 

  on

  DB Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi

  Please let me know if additional information is required.
  
  Any ideas would be appreciated.
  
  Thank you
  CJM

  Assuming that you are still connected to the same SMTP server, this means that the SMTP server intermittently is down or inaccessible (at least on the port that you are using). Most likely, it would be a problem to address to the administrator of the mail server even if it could be an intermittent network problem.

  Justin

• How do I resolve the error "421 Service not available.

  Hello
  
  Can someone help to solve the "421 Service not available" error I tried to send emails with three different smtp servers.
  
  the error I get this error: -.
  
  ERROR on line 1:
  ORA-20000: cannot send an e-mail: ORA-29278: SMTP temporary error: 421 Service not available
  ORA-06512: at "SYS." SEND_MAIL', line 34
  ORA-06512: at line 1
  
  
  Thanks in advance
  Uttam Singh

  This problem on the SMTP server.

  You should check with the system administrator.

  Maybe your server via SMTP SSL SMTP.

  problem sending mail with UTL_SMTP (STARTTLS)?

  or try

  UTL_SMTP.command (conn, 'STARTTLS');

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• I am trying to disable my photoshop of a computer, so I can move it to my new computer. It keeps giving me error codes and told me to call the phone support. The phone number does not work. Does anyone have any ideas how I can TALK to someone? UGH

  I am trying to disable my photoshop on the old computer, so I can transfer it to the new computer. Continue to get the 24:24 error code and told to call but can not get a number to work. Any ideas on how to get to TALK to someone?

  Oh, for CS2 activation servers have been closed. You must follow the instructions on this link to reinstall CS2:

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• The keyboard keys and symbols above them will not work. I have nothing except a space or they last used shift key, but works fine in other applications such as MS Word. The keypad works fine. Anyone have any ideas on that.

  I had to do a reinstall and upgrade to Windows 7, so I may have missed something. Running a 64 bit OS. Problem only appears in browsers.

  Troubleshooting extensions and themes

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

  Troubleshooting plugins

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20plugins

  Check and tell if its working.

• Effects Panel does not work on text editable? Any ideas on how to solve this problem?

  
  In case of problems with even to start with a new box and still the problem.

  To apply text effects, Muse must rasterize the text in an image. Therefore, effects on text will be only works if you have selected a system font or if you turned your text - which forces the text to be rasterized. The ability to select an effect to Web or Web safe fonts depends on compatibility with browsers that is not equal for all browser platforms like compatibility with CSS in browsers is something which Muse does not control in its design, we allow users to apply it to the text using system fonts because we are already rasterize the text block.

  If you want the effect on the text block, you need to add a stroke.

  Adding text effects | Adobe Muse CC tutorials

  Thank you

  Sanjit

• I am trying to open a web site called shark Groove and he always tells me that I have no ' adobe flash', but I do. I tried to open it in 'Internet Explorer' and it works? Do you have any idea how to solve this problem?

  I have version 3.6.13 Firefox and Windows XP. I don't know if I had something off or not? I put Firfox in safe mode to see if it would run faster, and since I'm now getting this message?

  There are 2 versions of Adobe Flash:

  • the version of the Plugin for Firefox and most other browsers
  • the only ActiveX for IE version (see: ActiveX)
  • Updated, you need to update as well

  You do not have the Plugin version installed for Firefox. Search for "Shockwave Flash" in tools > Modules > Plugins

  1. Install the Flash plugin to the latest version.
     • Download and SAVE to your desktop, so you can find the Setup program later
     • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
     • Once the download is complete, exit Firefox
     • Click on the installer, you just download and install
       • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
     • Launch Firefox and recheck your version or up to the download link below to test the installation
     • Download and information: http://www.adobe.com/software/flash/about/
       • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
       • Use IE to go to the site above to update the ActiveX to IE
     • Download manual installers.
       • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
       • Note the separate links for:
         • Plugin for Firefox and most other browsers
         • ActiveX for IE

• Hi, prob with professional vista laptop. Installed an English language pack. I can't connect to windows update, the window opens briefly and then closes, any ideas message.__any error? Thank you :-)

  no error message
  recent changes, installed vistalizator, English. German origin
  It would be much easier if I could write more than 255 characters! :-)
  Add AVG free try to help
  performed Trojan / malware scan, no problems

  He had an AVG antivirus on it originally but when I got my partner who brought it with her to the Austria I couldn't find the top program so I installed a.

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  CF. http://michaelstevenstech.com/cleanxpinstall.html#steps

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Remote Desktop works Win 7, but local printer receives a RPC error

  I have several laptops with Windows 7, which connects to 2 computers, using Windows 7 via Remote Desktop. Except for 1 computer, all the Remote Desktop connections work fine.

  A laptop will connect with Remote Desktop very well and allow the user all privileges, except printing on the client computer. The printer is shared in the same way for other laptops, the printer appears as an option and is selected, BUT when a print job is requested, this laptop computer receives a CPP print server error message.

  I also tried to disable the firewall on this laptop and continue to receive a the same printer error, so I don't think that it is a firewall issue. I also replaced it with one of the other phones using the same material and the printer works fine. One last note, I checked that the dirvers impression is correct on the laptop problem. When you are working on the local client computer, the printer works fine, the printing problem occurs only with a remote desktop connection.

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps.

• Any idea about this error ORA-20001: this post doesn't exist at all.

  Hi, I keep getting the error when I try to update of position and work with hr_assignment_api.update_emp_asg_criteria below
  
  Error report:
  ORA-20001: invalid Position
  
  This position does not exist, or is not completely in the period of the assignment.
  ORA-06512: at "APPS.HR_ASSIGNMENT_API", line 16616
  ORA-06512: at line 36
  
  But the id id and job position exists in the system.
  
  But if I use different position combination id id and work it works fine.
  
  One has faced similar problem?

  Hello
  You are visiting l_datetrack_update_mod VARCHAR2 (100): = 'FIXED '; so he's trying to fix the Position of 30-Sep-2011, but there is no such thing as the post on 30-Sep-2011, so it is in error.

  So, if you give l_datetrack_update_mod VARCHAR2 (100): = 'UPDATE '; Then he will try to fix the Position as on sysdate and it will not work properly.

  I hope this helps.

  PS - please mark my messages useful/correct if that is so he can help others.

  Thank you
  Gerard

• Any idea about the error on submit form (form external eloqua built-in)?

  Hi guys,.

  My team Web site operations gets attached all error trying to test the integrated external eloqua form.

  I tested the form by taking the HTML form Eloqua and make presentations to test. It seems to work very well.

  Someone has an idea what could be wrong here? Is there something wrong in integration on the landing page?

  Have you checked that the code is correct in the external page.  Form fields name and that relevant at all?

  Elizabeth

• SMTP service not available

  Hello
  
  How to send mail via the following code?
  
  CREATE OR REPLACE PROCEDURE send_mail (p_to IN VARCHAR2,
  P_FROM IN VARCHAR2,
  p_message IN VARCHAR2,
  p_smtp_host IN VARCHAR2,
  p_smtp_port in DEFAULT NUMBER 25)
  AS
  sys l_mail_conn. UTL_SMTP. Connection;
  BEGIN
  l_mail_conn: = sys. UTL_SMTP.open_connection (p_smtp_host, p_smtp_port);
  sys. UTL_SMTP. HELO (l_mail_conn, p_smtp_host);
  sys. UTL_SMTP.mail (l_mail_conn, p_from);
  sys. UTL_SMTP. RCPT (l_mail_conn, p_to);
  sys. UTL_SMTP. Data (l_mail_conn, p_message |) UTL_TCP. CRLF. UTL_TCP. CRLF);
  sys. UTL_SMTP. Quit (l_mail_conn);
  END;
  /
  
  
  BEGIN
  send_mail (p_to = > '[email protected]',)
  P_FROM = > '[email protected] ',.
  p_message = > "This is a test message."
  p_smtp_host = > 'mail.google.com');
  END;
  /
  
  
  ERROR:
  
  ORA-29278: SMTP temporary error: 421 Service not available
  ORA-06512: at "SYS." UTL_SMTP", line 20
  ORA-06512: at "SYS." UTL_SMTP", line 96
  ORA-06512: at "SYS." UTL_SMTP", line 138
  ORA-06512: at the 'APPS '. SEND_MAIL', line 9
  ORA-06512: at line 2
  
  
  Please, help me get through the error.
  
  
  Thanks in advance,
  Pradeep
  
  Published by: user11165897 on December 7, 2012 02:27

  Hello

  Here, all input values are false.

  By providing the correct host, email, port, it works fine now...

  Pradeep

• Work does not appear

  I got a copy of a syymbol model and uses the call below to create an instance centered in sight.  Call incoming return successfully, but the symbol is not displayed in the window.  I have the flag "paintOrder" kPlaceDefault value.  Any ideas?

  error = sAISymbol-> NewInstanceCenteredInView (symbolPattern, paintOrder, prep, & newArt);

  error = sAISymbol-> NewInstanceCenteredInView (symbolPattern, paintOrder, prep, & newArt);

  I think I see the problem. You asked for the art of the concatenation of symbol definition (GetSymbolPatternArt) and then you tried to create a new copy of art within this definition, even if it wasn't a recursive definition of symbol, you would actually be stick in limbo, somewhere, where art of definition of this symbol is retained. In any case, I think the docs of GetSymbolPatternArt () to say you cannot actually change it is why it is not probably complain.

  If you just remove this line and gave an art prep NULL, you would probably get what you want. If you want it on a specific layer, however, you do not want to provide the first art on this layer (GetFirstArtOfLayer()) - the layer group container - and a sense of direction (as kPlaceInsideOnTop, but kPlaceDefault would probably be nice).

• HPE h8 - 1360t: Equalizer bat for pc works do not win 10

  Hello

  Please, someone know where I can find a version of the IDT drivers update that actually works with 10 victory. I searched high and low and you have installed 6.10.6418.0 Beats Audio Control Panel and many others, it's the only one that works at any given time. The equalizer is the only part that doesn't work at ALL!

  Any ideas?

  Thank you

  Hello:

  See if it works...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  VERSION: 6.10.6504.0

  File name: sp71717.exe