V570 "cracked" display after having closed the lid

Similar Questions

• HP-17-F113dx: notebook not to resume after having closed the lid.

  Hello

  I have a HP Pavilion laptop 'HP-17-F113dx.

  It does not repeat the operation after you close the lid.

  I have to restart the computer to make it work again.

  What is the driver for this problem?

  @alexanderhernan

  Thanks for joining the HP Forums.
  I'll be happy to help you
  
  As I understand it the laptop is not take over onscreen once his COVER is closed.

  Don't worry, however, as I have a few steps to help solve this problem,

  Let's start by disabling hybrid sleep: click here to see a YouTube with a step by step guide.

  For the steps and details on how to control what your COVER:

  In the Power Options window that opens, click the link to Choose closing the cover on the left sidebar.

  Here you can choose what your power of the buttons on your computer, as well as what happens when you close the lid.
  You can choose to do nothing, sleep, Hibernateor shut down.  In general,sleep is a good option, but if you leave your laptop running, select do nothing.

  Note that you can change the settings for a cell and sector, so your laptop works differently when you use mobile compared to when you are connected to your office.
  Given that we usually only would want to let our laptop running when it's plugged in, we put ours to always go to sleep when it's on battery power, but to do nothing when you close the lid while it is plugged in.  Very convenient.

  Below, you will notice a few additional parameters, but they are protected by default.  Click change settings that are currently unavailable for editing.

  Now you can choose if you want that your computer requires password when he wakes fashion 'sleep'.

  Once you are finished, click Save at the bottom to start to use your new settings.
  If you want to come back when you're on the move again, just repeat the steps and set it as you like.
  Now, you are in full control of what happens when you close your laptop.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• 311-1037 mini Wifi connection is lost after having closed the lid of the screen?

  OK, this just started to happen yesterday, my wifi on my mini disconnects now after you have closed the lid! It is never used to do this, nothing has changed hardware wise, signal is the same strength, really confusing to me.

  Someone at - it the same problem or a solution?

  I have my power mode set to do nothing when the lid is closed, so it shouldn't be disabled at all.

  In fact, it switch performance Max to max power save, then return to perf max seemed to solve my problem.

• Scrolling after having closed the navigation panel shoots at the end of the book

  Hello

  Every day, I use Adobe Digital Editions to the DSM5. If I use the navigation panel to find common ground in the book in the table of contents or by a bookmark, then close the navigation panel, then try to access the next page, I am instantly taken to the last page of the book. I get to the next page either mouse or arrow keys. Basically, the only way I can do this is to scroll through the entire book 992 page to the page I want, so I can go to the next page, or leave the open navigation panel all the time. As with the navigation panel open, I have to constantly scroll left/right on the page, because the text is not redistributed or appear on a page with the open navigation panel that it's extremely frustrating.  I'm on Mac 10.11.3 with Digital Editions version 4.5.126234. I had this same problem on my last laptop and done a clean install, so am sure that's not just my system. Does anyone have a solution?

  Error with different eBooks? Otherwise know to check with this: sample eBook Library | Adobe Digital Editions

• Satellite U400 doesn't wake up after that I closed the lid

  When I want to do something like go out then I close the lid and then I can't get the laptop to wake up again, I have tried a few things but nothing doesn't seem to work.

  I na? t use Toshiba Power Save, I use the normal XP usual energy and I even tried with Toshiba Power saver, but not the software from start > Control Panel > but still the laptop not wakes up after I closed the lid.

  Anyone who can help me with this problem?

  thnx.

  Here's the good news, but could you please post a short instruction how you solved this? I think it would be interesting for other users here in the forum!

• Satellite L500 - external screen display after closing the lid?

  Hello
  I use the Satellite L500 - 120 Notebook, and before installing Windows 7, the laptop has a function very uncomfortable, when I applied an external display.
  When I closed the lid of my laptop, Office was shown on my display (with the native resolution of the external display) external, so I had not to
  change anything on the control panel. In Windows 7, Miss me this feature. I already tried to use the Control Panel, but there is no parameters, which fits
  with the previous ones. I can duplicate the screen in order to see my desktop screen on my external screen, but with the resolution of 1366 x 768 laptop.
  If I extend the views, then there is only the background image to the external screen, but this time with the native resolution.

  So my question is, how to conifgure Windows to recognize that I closed the lid, and the screen should be shown on my external screen?
  Or should I install applications Toshiba, that I had before, who visited account this function?

  Thanks for any help!

  Hello

  I m not a Windows 7 user because I want to wait until it will be released official, but I hope that I can help you a bit:

  First of all in power management, you can choose the action that happens if you close the lid (g. e. sleep, close, etc.). This action must be disabled because otherwise the laptop shuts down or something else.

  So I think that you need to install the display driver for your laptop. You can try the Vista driver because most of them are working on Windows 7.
  Then you should be able to define the correct screen resolution for external monitor.

  A working display driver is important to the clone or extends monitors to verify this!

• SP U400 - cannot return to the desktop after entering in the mode 'sleep' by closing the lid

  Satellite Pro U400 V-11 I used for a week. I don't know if this is a problem or I did something wrong. My setting of closing the lid is recording mode "Eve" in Vista.

  When I close the lid and open a few minutes later it's ok, I see the password login screen. But if the computer is in "sleep" for a while it does not return to the office when I lift the lid. The screen is black. Fan started working then quiet several times.

  The first three LEDs on the left are green. Keyboard does not respond. And also switch / stop does not work either I press once on or hold it. And only after I unplug the power adapter and press the power, it works. But it restarts the system and Windows could not close correctly the error message is displayed.

  Is this normal or something wrong with the mode 'sleep'?
  Thank you

  Hello

  I read on some of the similar problems regarding "standby" mode and the black screen.
  Someone suggested to update the BIOS and the display driver

  So I highly recommend it too much
  See the European driver of Toshiba page, choose the model right for laptop and try to update the BIOS, then the display driver.

  Reboot the laptop and see if the problem still occurs.

  Good luck

• Equium A60-692 restarts after closing the lid

  More annoying, the only thing I can do is hold the power button to turn off & on again. Is there a key combination should I put pressure to bring its edge form after you have closed the lid, or is it a fault?

  Thank you

  Usually when the size of the memory changes, the system can recover.

  Remove the battery and the AC adapter / CC, and then remove one of the memory Modules and power on.

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• Tecra 9100: Sleep Mode is no longer enabled after closing the lid

  Hello

  First post here and not the smartest when it comes to computer skills...

  Have a Tecra 9100 about 4 years old, under XP Pro SP2.

  last 3 days whenever I close the lid of the laptop it won't STAND BY mode me leaving no option but to propel to the top and I get "SUMMARY FAILURE PRESS ANY KEY."... »

  I changed any settings whatsover and since then, I tried to access the Power Saver icon in Control Panel, but when I click on it nothing happens. I then click on a few of the Control Panel Power Options and I get the message "...". "a Microsoft power options and use the Toshiba power Saver saver" which obviously I can't access either!

  Is there any reason why closing the lid of my laptop is no longer 'Stand by' mode, basically going in OFF format only, it became a major drawback and don't know where to turn to.

  Any help or advice would be greatly appreciated.
  Thanks in advance.

  Hello

  Reading your post I guess windows on own power options and doesn t use Toshiba power saver power profiles.

  Generally, the issue should be resolved by switch again to the Toshiba power saver in the-> power options control panel! But your announcement about turning the power on, it is not possible! It s very strange?  :|

  In this case, I recommend to remove the Toshiba installation energy saver. This can be done in the Add & Remove programs.

  So finally, check out the following steps:
  Remove the energy saver, restart the laptop, reinstall the Toshiba Common modules, reboot the laptop and install again the energy saver.

  After this procedure, the splash screen should work! By the way; the hibernation mode is disabled by default. If you want to use the Hibernate mode, you will need to enable it first!

• After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture. What could be the problem and how to fix?

  After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture.  What could be the problem and how to fix?

  Hello

  Looks like a loose connector or a short circuit in the video cable. Check with a real
  store computer (one that works on computers cell phones internal ASUStek) or ASUStek
  Support, their documentation and online in their forums.

  Not a maintainable question by the user.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows error recovery received CONSTANTLY after closing the lid

  I did a factory reset using the recovery a month ago discs.  When I was using the system at this time as I closed the lid.  When I came back to it at a later date, I opened the lid and noticed that it was not on.  I pressed the power button and received the following message is displayed:

  Windows error recovery

  Windows is not shut down successfully.  If it was because of the system does not, or if the system was stopped down to protect data, you might be ale to recover by choosing one of the Safe Mode configurations from the menu below:

  (Use the arrows to select your choice.)

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Start Windows normally

  What is the problem and how can I fix this so it doesn't happen or is this normal with Vista.

  Hi SouthernDixieCowgirl,

  This would happen if the driver graphics card on the computer is damaged or needs to be updated.

  You will need to update the drivers to display on the computer card by visiting the manufacturer of the card or the computer manufacturer's website and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Also, make sure that you install drivers chipset update by contacting the manufacturer of the computer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer laptop bluescreens with BUGCODE_USB_DRIVER after you have closed the lid

  My HP with Windows 7 X 64 laptop recently started giving the bluescreens with
  BUGCODE_USB_DRIVER immediately after I close the lid and open new, as well as when the computer tries to stop.
  I don't know what type of newspapers I can post to display more clearly the problem or where I can find them, guidance would be appreciated on this topic.

  Here are the specifications of my laptop: http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/321957-321957-3329744-64354-64354-5186811-5218648.html?dnr=1

  Hello

  Thanks for posting this question in the Microsoft Community.

  1. what security software is installed?

  2. don't you make changes to the computer before this problem?

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Restart the problem after closing the lid of the laptop for a few minutes

  I use Windows 7 Home Premium on my Asus A53S. I have reboot issues a few minutes after closing the computer laptop lid eventhough I put what to do after closing the lid to "do nothing" for both on battery and the plug. And it will keep restarting over and over again. Rest

  Hi DennisHii,

  You did changes to the computer before the show?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.