ProBook 6545b: error light and start battery ProBook 6545 b

Similar Questions

• My satellite phone battery does not light and the battery won't charge (rest on 2%)

  Basically, my laptop is 3 months old and I don't know why it's acting weird. First of all, when I bought the laptop in June 06... the first week the laptop has no power in battery mode. So I stopped using the battery mode and still had to use my power adapter to power my laptop.

  Now 4 weeks later, I removed the battery to the rear and put again. Guess what the battery started working. Now 2 months later the same problem occurs, only that this time after removing the battery to it still turn on and the battery says 2% and also fails to load.
  So I m stuck with my son again... can anyone help?

  Hello

  In my opinion the best solution is to confront your local dealer with this problem. If I were you I wouldn't waste time. Unit is fairly new, warranty still valid and unit should operate.

  Perhaps is there some problem with electronic supply power.

• When I go to the defender of window he says it's off. Box comes up press to put on the ___message error lights and error ox800705b4 comes out and it freezes and I have to wait until its expiration time says. __

  You have problems with start programs windows Defender
  OX800705b4 error messages
  Recent changes made to your computer just installed the new system
  What you have already tried to fix the problem mbut he fails to change things to saysany Mu status

  You have a suite of security such as MSE, Norton, McAfee, etc., installed? They have integrated programs which do the same work as Windows Defender and close it to avoid a conflict. This is normal and the way it should be. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

  Can I uninstall windows defender? My MSE says protected.  Thank you Charles Dalton.

  GA.

  NO.

  You cannot uninstall windows defender in vista

  It is part of the vista operating system

  BUT you can turn it off

  read the below methods to disable windows defender in vista

  read the information on the link on how to disable the windows defender service in vista below

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

  Walter, the time zone traveller

• Problems with error 1053 and start my printer spooler

  Hi, I also got an error 1053 come when I am trying to install my new Canon MP250 printer to my laptop with Windows 7 installed.

  Can anyone help?

  Hello

  A 1053 would occur if the service does not correctly record his status as started with the service control manager.

  Difficulty for the spooler service dependency information from and then restart the print spooler service and check if it helps.

  Step 1: difficulty for the spooler service dependency information

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  1. click on start, run and type Regedit.exe
  2. navigate to the following branch
  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler
  3. in the right pane, double-click the DependOnService value
  4. remove the existing data and then type RPCSS
  5. close Regedit.exe

  Important This method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the registry
  incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then, you can
  restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to display
  the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry  

  Step 2: restart the spooler service print;

  Follow the instructions below to start the Printer Spooler service.

  1. click on start.
  2. type services.msc in the search to start.
  3. right click on the Printer Spooler service and click Start.
  4. on the general tab, next to startup type, make sure that automatic is selected.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also check this thread for more suggestions:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/38b019cf-44BF-4123-A39E-09c025f89da9/

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Overflow on line error 1727 and 1733 battery when I login in my email account online.

  It is on a single computer only. I ran CCleaner on the registry and it did not help. This problem just started in the last week.

  Help, please. Thank you.

  I changed browsers Google Chrome and all is well now. Chrome is far

  higher speed compared to IE.

• When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

  When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

  I can only log in safe mode of network.

  original title: blue screen error

  If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  "System Configuration Utility overview"
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

  HTH,
  JW

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• Satellite A30 - electric light flashes and the battery does not charge

  Hi guys,.

  I have the model above and recently, when I plug in my power cord to the back of the laptop instead of the usual constant green light loading, the indicator flashes and the light orange low battery always flashes as well.

  I have checked the plug, unplugged the power cord from the laptop and plugged back again but does not help. A few times it started loading so everything went well and now he again refuses to load.

  Any suggestions how I can solve this will be highly appreciated.

  Thank you.

  Dante

  Looks like a hardware problem

  Usually if the power light blinks then it does not sound good because the LED provides an error code which can be read by a technician for laptop

  But before you will contact the technician for laptop for help, try to do it:
  Remove the battery and unplug the AC adapter from the portable computer
  Wait about 20-30 minutes and then reconnect the two parts.

  Then try to turn on the laptop

  If it doesn t help that it s time for the call of the ASP

• HP Photsmart C7280 - flashing lights and error messages on blue when screen off the printer.

  HP Photosmart C7280 All in One.

  This 3 year printer seemed to install OK when I it connected via a wireless modem/router.

  My turn and Lap Top printed ok for months. They use Windows 7 64-bit.

  Recently when the printer was left off for a few days all its lights started to blink.

  If I disconnect and reconnect it the power and cable modem/router, the printer works ok again until it is turned off.

  The lights will start to Flash.  Also, I'm getting 2 error messages on blue screen when the power is off and the lights are flashing...

  B8SIFE84 blue screen error code still appears, and once I saw the blue screen B3772734 error code appear as well.

  I deleted and reinstalled the device by using the printer software HP correct and downloaded and installed all the relevant printer updates that I can find. The problem still persists.

  Help, ideas or thoughts to the subject of what to do to solve this problem would be appreciated.

  Don't

  Have sussed out.
  Power supply is 'blacktus cactorum cactus. "
  It is unclear when it is off.
  Looks like this is a new printer for "don't" then buy HP shares and buy a 5 year warranty with the new printer.

• my mac book does not light and I get three beeps while it tries to start

  my mac book does not light and I get three beeps while it tries to start

  Three beeps is almost always a problem of memory RAM.

• I have an Acer 1810tz-4008 and computer won't start battery. New charged battery - what should I do?

  Original title: the battery starting

  I have an Acer 1810tz-4008 and computer won't start battery.  New charged battery - what should I do?

  Hello

  Check with support from Acer.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ===================================

  Other information that might help:

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• IE8 and it just started with a lot of error reports and custom back to the home page

  Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated

  Hello mikegrimesWQ,

  Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer?  Windows loads correctly and allow you to connect with success?  Have you completed all the updates of Windows since the relocation?  Do you get errors at any time?

  What version of Windows XP you are using and which service pack is currently installed?  I would say confirming all your drivers are recognized and updated.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  Please let us know status.

  Thank you

  James

• My laptop xp display Dim on current alternative and light on the battery! How reverse that?

  Original title: display dims

  My laptop xp display Dim on current alternative and light on the battery!  How reverse that?

  Hello KarenJudyOrdoyne,

  Thanks for the return of the response.  I've included the Dell Web site below for the latest drivers, firmware and BIOS updates.  I would like to confirm that you are the first on the updates.

  Dell support:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427825

  If you look in the support section, other users have reported this problem.  In some cases, replace the power supply cable has solved this problem and I show other update to the latest BIOS update and this has changed.

  Also, do you have the Dell Diagnostics on your computer?  This is usually installed by the manufacturer, but you can run a test to determine if there is a hardware problem.

  I hope this helps!

• Vista SP1 - error startup! 0xc0190002! 328/88027 ($$ _boot_pcat_ja - jp_d98fca962b0246de.cdf - ms). I can not get this error to go away and start my PC now. Help, please!

  Vista SP1 - error startup! 0xc0190002! 328/88027 ($$ _boot_pcat_ja - jp_d98fca962b0246de.cdf - ms).  I can not get this error to go away and start my PC now.  Help, please!

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or try this Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  Restore the previous settings, repair facilities, and retrieve data.

  See you soon.

  Mick Murphy - Microsoft partner

• Could not start the computer using the normal error 0x800106ba and 0x80070426

  Original title: Code 10 and error code Window Vista

  Hello

  I'm loading up on safe mode with network.  When I tried to laod normal I get a blank screen and after I sign-in is on Safe Mode.

  I got error 0x800106ba and 0x80070426 messages and I just opened the Device Manager and found this security processor laoader driver code 10.

  Since then, I have installed a constant guard with Comcast meet all what I had problem with my system.  I called tech support and they won't help because they say that I have problems with my Dell Inspiron 530 problems I describe with the PC and not releated to each software.   If anyone can help.  In August 6, 2012, I ran diagnostic memory without any problem what so ever. I have no idea what else to do for these problems, suggestions please let me know.  Thank you

  Elizabeth

  Hi Elizabeth,.

  Follow these methods.

  Method 1: Disconnect all external devices except the keyboard and mouse and try to start the computer in normal mode.

  Method 2: Start your computer in last known good configuration.

  Method 3: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 4: Follow the steps in the article.

  What to do if Windows does not start correctly