VAIO with XP start is no longer

Similar Questions

• Why backup with Xperia companion take so long? (2 days)

  Hello

  why backup with this tool takes so long. The information bar, says phone has 15 GB. After 24 hours, about half is saved. Make backups with other tools is done in less than an hour :/

  Everyone knew what goes wrong?

  THX a lot.

  best,

  Meg

  Hello

  I live in France and I have the same problem with the Xperia for Windows companion software. I bought the new XA Xperia a week ago. I connected with USB on my computer, I started companion Xperia and I launched the backup point. I selected all the boxes (documents, contacts, photos, videos, music). The backup process took several hours (4 hours precisely) and stopped at about 50% without any error message. So I cancelled the process of backup at this stage.

  I tried a new backup process by selecting only 'music' backup piece (I 314 music this cost 1.3 GB on the Xperia XA) and here, it worked and the backup process took about 5 minutes and finished.

  So, there's a big problem with the companion software when all the boxes of the savepoint are checked.

  I contacted Xperia Care France and Xperia care told me this very short message: "(1) (download the software companion Xperia 2) (plug the Xperia XA your computer 3) launch of the companion software and follow instructions on the companion show...» »

  For example, to get help, I write this message on this forum for Xperia. Please help me or tell me which Android App that I can use to back up my data (contacts, documents, settings, photos, music, videos).

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• In CloverETL how to read file xlsx with a column of type "long".

  Hi all

  Let me know how to read an xlsx (Excel) file with columns of data type "long".

  I used XLSDataReader to read file xlsx. There are names of "Remarks" column, which exceeds the linits of 256 characters, so I can not use type 'string' to do this.

  IM using "long" datatype and graph below error crossings.

  Pointers on this will be greatly appreciated.

  INFO [main] - * graphic CloverETL framework/transformation, (c) 2002-2013 Javlin a.s., published under the GNU Lesser General Public License *.
  [Main] INFO - running with CloverETL library version 3.4.1 build #010 updated 07/01/2013 18:38:12
  INFO [main] - running on 4 CPUS, operating system Windows 7, architecture amd64, Java version 1.7.0_07, max memory available for JVM 913920 KB
  INFO [main] - loading properties by default: defaultProperties
  INFO [main] - graphic definition file: graph/SurveyResponses.grf
  INFO [main] - graphical revision: 1.16 modified by: 470707 update the: kill Jan 20 16:13:52 IST 2015
  INFO [main] - check the graphical configuration...
  INFO [main] - graphical configuration is valid.
  INFO [main] - graphical initialization (SurveyResponses)
  INFO [main] - initialization of the phase 0
  INFO [main] - Phase 0 initialized successfully.
  INFO [WatchDog_0] - starting all the nodes in the phase [0]
  INFO [WatchDog_0] - has successfully started all nodes in phase!
  INFO [XLSDATA_READER1_0] - reading data of 0 sheet (Sheet1).
  ERROR [WatchDog_0] - component [XLSDataReader:XLSDATA_READER1] finished with ERROR status.
  How (long) field cannot be set to the value "comment." does not match the specified format ' ' with good reason 'incomplete analysis. " in folder 1, 23 ("comment"), metadata field 'Survey_Responses_Sheet1 '; value: 'How' (note that for parallel processing ParallelReader or server, run the registration number may be incorrect)
  ERROR [WatchDog_0] - the error Details:
  org.jetel.exception.JetelRuntimeException: component [XLSDataReader:XLSDATA_READER1] finished with ERROR status.
  at org.jetel.graph.Node.createNodeException(Node.java:535)
  at org.jetel.graph.Node.run(Node.java:514)
  at java.lang.Thread.run(Thread.java:722)
  Caused by: org.jetel.exception.BadDataFormatException: how (long) field cannot be set to the value "comment." does not match the specified format ' ' with good reason 'incomplete analysis. " in folder 1, 23 ("comment"), metadata field 'Survey_Responses_Sheet1 '; value: 'How' (note that for parallel processing ParallelReader or server, run the registration number may be incorrect)
  at org.jetel.data.LongDataField.fromString(LongDataField.java:465)
  at org.jetel.data.parser.XLSXDataParser.parseNext(XLSXDataParser.java:492)
  at org.jetel.data.parser.XLSParser.getNext(XLSParser.java:136)
  at org.jetel.util.MultiFileReader.getNext(MultiFileReader.java:432)
  at org.jetel.component.XLSReader.execute(XLSReader.java:562)
  at org.jetel.graph.Node.run(Node.java:485)
  ... 1 more
  Caused by: java.lang.NumberFormatException: incomplete analysis
  at javolution.text.TypeFormat.parseLongString (unknown Source)
  at javolution.text.TypeFormat.parseLong (unknown Source)
  at javolution.text.TypeFormat.parseLong (unknown Source)
  at javolution.text.TypeFormat.parseLong (unknown Source)
  at org.jetel.util.formatter.JavolutionNumericFormatter.parseLong(JavolutionNumericFormatter.java:74)
  at org.jetel.data.LongDataField.fromString(LongDataField.java:462)
  ... 6 more

  INFO [WatchDog_0] - the implementation of phase [0] completed with error - elapsed time (sec): 4
  ERROR [WatchDog_0] -! Completed with error - graphic stop run!
  INFO [WatchDog_0]-* the summary execution of Phases * -.
  INFO [WatchDog_0] - Phase # finished status RunTime (sec) MemoryAllocation (KB)
  INFO [WatchDog_0] - 0 4 175279 ERROR
  INFO [WatchDog_0]-* end of summary * -.
  INFO [WatchDog_0] - finished the watchdog thread - total running time: 4 (s)
  INFO [main] - freeing graphics resources.
  ERROR [main]-
  --------------------------------------------------------------------------------------------------------------------------------------------------------- Error details ----------------------------------------------------------------------------------------------------------------------------------------------------------
  Component [XLSDataReader:XLSDATA_READER1] finished with ERROR status.
  How (long) field cannot be set to the value "comment." does not match the specified format ' ' with good reason 'incomplete analysis. " in folder 1, 23 ("comment"), metadata field 'Survey_Responses_Sheet1 '; value: 'How' (note that for parallel processing ParallelReader or server, run the registration number may be incorrect)
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  ERROR [main] - the graph failed!

  I think the 256 character limit is a red herring.  All data is there, the front-end integrator is truncating only for display purposes.

  Your data is a string, it should certainly be classified as a string in the metadata.  For a long time is for numeric values.

  I don't think there is a problem here, if you were to write this data to the trash or a text file (after reading it in), you will see that your data is not truncated.

  Kind regards

  Patrick Rafferty

  Branchbird

• Is there anyone who can help me with Super Start

  I need assistance with Super Start. I checked the faqs and my problem is not covered.

  Great Start has a "backup" feature that allows you to export and import manually or via a "cloud" service
  http://www.enjoyfreeware.org/SuperStart/export-import

  There is also a folder named /superstart/ in the Firefox profile folder that contains various data files that are associated with Super Start. The file named sites.v1.json contains the data for the 'tiles' that are on the page "start". And there is a folder named snapshots with the images for the page tiles "start". Other files are in the folder / / superstart, but I know not what they are for - has in Super Start I've not used.
  https://support.Mozilla.org/en-us/KB/profiles-where-Firefox-stores-user-data

  There are also a bunch of about: config preferences for Super Start. I am a new user of Super Start, but do not have much experience with it. I installed only for having a "homepage" with tiles for 6 news sites I visit every day.

• Sony VAIO with Windows 7: Firefox crashes within minutes of departure. Did not initially. Can you help me?

  Portable changed job several months ago.
  Currently using Sony VAIO with Windows 7 OS.
  Changed during any of the information; several tabs open as 'home '.
  No problem for months with firefox running.
  About 4 to 6 weeks after the opening, the program freezes and will not respond. I have to force him to leave. Abandoned and changed in Google Chrome.
  Internal number THERE dude can't understand.
  I have no problem with my personal MAC (even put in place and home of the tabs).

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Stop synchronization of windows with the file is no longer available

  How to prevent synchronization of windows trying to sync with a folder that no longer exists? I'm working on a windows XP computer that had a network folder shared on our old domain controller. It was created to "work offline". This former DC has since died, but the XP machine is still trying to synchronize with him whenever he disconnects or connects.

  I tried to delete all the files temporary/offline, I tried windows Explorer and go to tools > Synchronize and then unchecking the file that does not exist. I tried to go to the configuration of the synchronization and UN-checking the folder to synchronize when connected to the LAN. Nothing seems to prevent synchronization attempt. There are also other folders that exist that I want to keep the synchronization with, so I don't want to completely disable synchronization. Does anyone know how to make so that he can stop sync with just this file?

  Hello

  You can try the troubleshooting steps provided in the link below in case you haven't tried them already.

  How to use offline files in Windows XP
  http://support.Microsoft.com/kb/307853

  For more assistance, you can publish the isuse on the link below.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to move the "blue bar" with the start option and the clock and icons of a vertical__position on the left side of the screen to the bottom of the screen... has this before happen__once, can't remember what to do.

  How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen.  It's happened before and I forgot how to move.

  Hello pookprec

  Here's how to do it

  .

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• Office restarts itself when it is stopped with the start menu and the power button.

  Original title: stop problem

  My office will restart itself when it is stopped with the start menu and the power button. I went to the start menu task bar to ensure that the setting was correct.

  Hello

  1. Press (Windows key) + R and type "regedit" and press enter.

  Find the following key:

  Geographical area: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  3. double-click on "PowerdownAfterShutdown.

  Then,
  Change it to '0' if it is '1' OR
  Change it to '1' if it is '0 '.

  And press ENTER.

  Then reboot andtry to stop.

  If this does not work, make sure that you change the value in regedit back to what she was original

  Try this one:

  Put the laptop to sleep then let it restart itself. Then run command prompt and

  Enter 'powercfg - lastwake. It should give you the description of what caused the alarm.

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410

• Why can't I just move on with windows7 starter to windows 8, my computer is only 9 months since purchest?

  Why can't I just move on with windows7 starter to windows 8, my computer is only 9 months since purchest?

  So it will not uninstall then install my programs, or what, then another question is the offer for $14.99, that's what I was watching and I filled a free upgrade and probably has not been fully tested for this upgrade, he said I would be able to get the upgrade, but there is no decrease in my emails guess still in work. While {s it improves just $ 40 million that I should wait for a version pro or ultimate?

  And what will happen to my saved files?

  and I'll be able to restore to the factory with warranty setting and I can use my series to my computer for the upgrade?

  NOW please if you don't know it please tell me I would like to know some facts and since there is so much development, in my view, the pro version is yet to come, so...

  Windows 7 Starter is not eligible for the offer of $14.99.  Only Windows 7 Home Basic, Home Premium, Professional and Ultimate. If you must upgrade to Windows 8, then you have to wait on the upgrade $ 39.99 for Windows 8 Pro that will become available October 26, 2012.

  The upgrade will allow you to keep your applications, personal files and settings.

  Yes, it should be able to restore the factory State, but always backup before making changes on your computer like installing an operating system:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

• I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Two points:

  1. it is unlikely that your current installation would work if
  you have changed motherboards. You need to reinstall itself.

  2 but you cannot use your current copy of Windows if you change
  motherboards, not even if reinstall you it cleanly. The largest
  disadvantage of an OEM version, is that its license it binds permanently
  the first computer, it is installed on and Microsoft believes that
  If you change the motherboards, another computer. It can never
  legally be moved to another computer, sold or transferred (except with)
  the original computer). If the computer dies or is stolen, your
  license dies with him.

  Ken Blake, Microsoft MVP

• Sony Vaio with Windows 8 - battery error message

  I have a Sony Vaio with Windows 8. After updating, I received this message:
  
  Click OK to switch to hibernation mode, remove and reinsert the battery. See the electronic Guide VAIO (R) for more information on using the battery. The battery may not be properly connected to the computer or may not be compatible with the computer.

  How do I solve this problem with Windows 7, I saw other messages, but I can't translate it for Windows 8. Can anyone help?

  Hello

  This error message is generated by Sony battery Checker (ISB utility). This indicates that there is a problem with the battery.

  I suggest that you check with Sony support for more information about the issue.

  http://eSupport.Sony.com/us/p/select-System.pl?model_type_group_id=10