Validation error: while installing LC ES2.5 on w7 (invalid domain name)

Similar Questions

• I get a Script Error failed. I think it is because the domain name is on page 1 and the field with the calculation is on page 2.

  I get a Script Error failed. I think it is because the domain name is on page 1 and the field with the calculation is on page 2.

  The formula is just + Cash.  I don't know how to tell him to look on Page 1.  If I use the same domain on Page 1, the formula works so I know that this is not something in the name of the field.

  

  It received NO response

  Page1.cash should do it. If not, you can use CTRL + click to enter its name in your script.

  1. Select the field that you add the script.
  2. Scroll the design view until you can see the object whose name you need. (Is not necessary if the object is already in mode)
  3. Click inside the script window to place the cursor where you want the name of the other object.
  4. Hold down the CTRL key while clicking the object whose name you need.

• Error while installing Oracle 11 g under Solaris 10 SPARC 2 forms and reports

  We are trying to install Oracle Forms and reports 11 GR 2 (11.1.2.2.0) 64-bit Solaris 10 SPARC 64-bit (U9) and we are facing errors of installation during installation of 11 GR 2 forms. I will note down the environment and steps reproduced to produce errors:

  Environment:

  Operating system: Solaris 10 SPARC 64-bit (U9)

  JDK: Oracle 1.7.0_79 64-bit JDK

  WebLogic: Oracle WebLogic Server 10.3.6 64-bit

  Form & reports: 11.1.2.2.0 64-bit

  Steps to follow:

  1. install JDK - success

  2. installation of WebLogic Server 10.3.6 (64-bit) and created a new home of Middleware. -Success

  3. ensure that all prerequisites are met by a prior information of Oracle: http://docs.oracle.com/html/E25460_01/r2_fr_requirements.htm

  a. all patches necessary OS and packages are installed

  b. There are a lot of disk space, swap, TEMP space and memory (RAM live)

  c. all environment variables are cleaned, as indicated in the prerequisites in the URL

  d. no other product Oracle doesn't lie in the path except for the JDK. (NOTE: Forms 6i is installed in a separate House in the server.)

  e. all software are 64-bit

  f. the user oracle (same user who has installed the JDK and WebLogic) has read, write, and execute permissions for the entire House of Middleware.

  g. we set the LD_LIBRARY_PATH variable to $ORACLE_HOME/lib as indicated in the Doc ID 1643548.1.

  4. start the installer of Forms

  a. choose 'install only - do not configure ".

  b. all the prerequisite checks passed

  Errors: Installation product until it reaches approximately 92% when we get the first error:

  "Error in invoking target 'nnfgt.o' of makefile '$ORACLE_HOME/network/lib/ins_net_client.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".

  If we click on 'Continue' to work around the error, we get another error after that:

  "Error in invoking target 'repeat' of makefile '$ORACLE_HOME/precomp/lib/ins_precomp.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".

  Someone has met these errors before installing 11 GR 2 forms (11.1.2.2.0) on Solaris 10 SPARC 64-bit?

  Thank you

  Scott

  We have solved the problem. The library of expr has not found in/usr/xpg4/bin but in another location. After you create a symbolic link in/usr/xpg4/bin pointing to where it has been deployed, the installation is completed successfully (after removing the previous attempt failed).

  A test you can do to make sure that expr is working correctly is to run expr 1 + 1 in the shell. If the command works, the library can be found.

  Matthew, I thank you for your suggestions as well.

  Thank you

  Scott

• Error while installing ESXI

  Hi all

  while I'm installing ESXI on my BladeCenter (FlexSystem) on the node

  I get this error message

  What can I do?

  THX

  THX, anything that's help me

  Problem in costumization ESXI from FlexSystem (cannot be installed on the usb - hdd need only port)

• Error while installing Win 8 update on Satellite L955-108

  Been trying all day to install the updates of Windows (all 8), but constantly having * error Code: unable to action * 8024200d

  Never had this problem before on Satellite L955-108

  In my opinion, is that Microsoft related question to verify it please this page.
  I hope that you will find answer here.

  Any comment is welcome!

• Error while installing Windows 7 on Dm4-3170se?

  I just bought a refurbished DM4-3170se. He got in shape without the operating system. When I try to install the Windows 7 it keeps defaulting to the configuration step.

  I have even converted the disk cache raid drive.

  I tried to load the Raid drivers available from intel.

  Two things have failed. If I order the recovery disks it will work? or do I did something else?

  Hello Dealer101.  I understand that you encounter some difficulties in installing Windows 7.

  You try to install Windows 7 on a commercial installation disc?
  
  
  
  What happens when you try to load the RAID driver?  What is the error message that you receive?  Here is a link for the driver in case.

  If you use a normal commercial disc to install Windows 7 I do not pretend to order a set of recovery media.  This should make the process much more as a recovery will install not only the operating system, but the drivers of devices as well.  This should save time that you will not have to scour the internet looking for drivers.  If you are in the United States / Canada you can contact the HP Support to the 1-800-474-6836 for information on the recovery media.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  I'll keep an eye out for your answer.  I wish you a nice day!

• "0xc01a001d (\Registry\Machine\COMPONENTS\DerivedData...). Error while installing Vista SP1, WITH RESTORATION or BACKUP ACCESS FORBIDDEN! ANY CHANCE OF HEALING?

  I rebooted several times Vista since Vista SP1 download.  I tried to get my system prepared for a Boot (as several vital Programs are not yet supported) double Win7.  I keep getting stuck on the "0xc01a001d? / 99216 (\Registry\Machine\COMPONENTS\DerivedData... "error.

  I have saved on an external USB hard disk and do not have the original system disks.

  I downloaded the Vista recovery disk.  On all options, he said that I could not restore.  He could not read the USB key to find the backup point.  He would not even install when I tried to reinstall.

  Y at - it a help to me.  I am a student and can get another copy of Vista from MSDNAA but would go instead by the download time intensive task, to find drivers on the Dell Web site (I have an Inspiron 1501) and reloading everything.

  ALL BOARDS

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Vista.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Argument not valid error when installing a printer

  I use Windows XP SP3 and have problems with my install shield.

  Printer media tells me that my install shield does not communicate correctly and the error is probably in my PATH or the registry.

  Any help would be useful.

  Racefan14

  Hello

  1. What is the number and model of the printer?

  Downlaod the last set of drivers for the printer from the manufacturer's website and install it on the computer.

  Reference:

  To install new or updated printer drivers to update

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_drivers_install_updatew.mspx?mfr=true

  See also:

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  To add a printer attached to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

• Error while installing windows Xp on my E Aspire 13 ES1-311-C4VK. Error is STOP: 0x0000007E.urgent pls help

  I tried so many times to install windows xp on my Aspire E 13 ES1 boot cd - 311 - C4VK.Xp first, then load something. After that, it shows the error:

  STOP: 0X0000007E (0XC0000005, 0XF73B9D66, 0XF78D9EA0, 0XF78D9BC)

  ACPI.sys - address F73B9D66 base at F73AE000, DateStamp 480252 b 1.

  I need urgent help.

  And another thing, I want that it is not possible to change the sata ACHI to ide mode. Isn't it possible to change?

  Why windows XP?

  It is not longer supported by Microsoft and other SOFTWARE, and it is the best OS to have viruses, rootkits and other infections.

  you will be also problems of drivers/hardware as acpi.sys

  If you need windows XP for some old software, try to use a virtual machine or buy a second hand laptop.

• get the engine deployment error while installing Vista Ultimate 32-bit

  When I try to load vista ultimate I get an error message; Windows game could not reset the deployment engine. To install windows restart installation. then I start again with the same results. Vista can't handle new computers? This is a new computer without an operating system.

  Hello

  1. how you try to install Vista? You install using Setup disc or try to re the image?

  Please check the compatibility of your drive with Vista:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=Seagate%20barracuda%201.5%20TB

  You can use third party software to do a low-level format of the disk, and then try to install Vista once more.

  Important: Microsoft offers no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

   

  If this does not work please get another Vista Installer DVD to install it.

• "Pilot of the reader needs CD/DVD is missing..." "error while installing Windows7 from USB

  Im trying to install Win7 on a new generation of PCs. I have created a bootable USB key as I have no optical drive but when I get to the Setup screen, I get an error saying "needs CD/DVD device driver is missing... »

  -I'm using the USB 2.0 ports (not 3.0) and I tried to a switch port to others as some nets has suggested, but that has not worked. (Ref my Mo is a MSI Z170I)

  -Ive also confirmed that my BIOS is set to AHCI (non-RAID)

  Any ideas of what I could try to fix this or what Im missing drivers?

  Also, when I try to review for the drivers I see only a X: drive that does not have the same directories as on my USB key. For example, I downloaded the drivers SATA of MSI and copied on USB to see if that helps. But when I try to search for it I can not even find the files. Does this mean that my USB is not detected?

  Thank you

  See if that helps the z170 and Skylake use xhci instead of ahci, so you will need a creative tool special iso usb.

  https://Forum-en.msi.com/index.php?topic=261560.0

  If you do not have a win - 7 iso file you can use Chrome and this to get a

  Link was considered as inappropriate by the moderators: p

  See also this for a painless as possible install

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• error while installing linux on vitavm9

  Hello

  I install Linux on VM ware pre-installed 9 installing it I amgetting error

  PXE - E53: no boot file name given

  PXE - MOF: Exit Intel PXE ROM

  Operating system not found.

  I did the mount connected and plugged in but still iam getting the error

  Please help me soon its urgent

  Hi I did the right thing has also selected the power connected and connected on

  in fact I'm taken iso on my local drive not cd, I tried with both but gives me the same error

• Error while installing I-200

  Application manager downloads and installs.

  I run the app and it tells me I need to sign in with my adobe ID.

  Then he said:

  "An unexpected error has occurred processing your request. Please try again later.

  "I-200"

  I uninstalled the app and re-downloaded and installed and I still get the same error.

  Any ideas?

  -ben

  Delete the following folders

  "OOBE" and "MBLStore" are in the locations below:

  on Mac: /Users//Library/Application Support/Adobe

  Windows XP: drive: \Documents and Settings\Settings\Application application Adobe

  on Windows 7: drive: \Users\\AppData\Local\Adobe

  Let me know how it goes.

  - Abhishek Maurya

• Error while installing Oracle e-Business, 9100 user management (ORCL_EBS_UM_)

  I try to install ORCL_EBS_UM_91000 on IOM 9102 and facing the error
  
  "DOBJ. XML_IMPORT_ERROR
  Unknown tag received OBJ_OFFLINED.
  "
  
  When I checked the log
  ERROR, may 3, 2010 17:43:02, 944, [XELLERATE. WEBAPP], class/method: ConnectorInstallProcessAction/importXmlForInstallation/DDM Exception when importing xml meets some problems: unknown tag received OBJ_OFFLINED.
  
  Please help... its very urgent for me... before this I installed around 4 different connectors with questions

  It's almost impossible. It is not on 9.1.0.2 for sure. Perhaps it has not entirely updated IOM. For confirmation of the upgrade, see logs.

  Thank you

  Sunny

• "BOOT MGR is missing" error while installing Windows.

  Original title: problem during installation of operating system

  whenever I get the CD/DVD of any Os install , it shows a message

  "BOOT MGR is missing"
  Press Ctrl + Alt + Delete to restart
  -
  -
  I rebooted a hundred times and tried a lot of different types of BONES [e.g Xp, Vista, Windows7, Windows server<2003,2008,2012>& EVEN Windows 8]
  my computer's CPU is Intel Core Duo
  RAM:--2 GB
  supports:-only 32-bit Os
  Please please help me

  whenever I get the CD/DVD of any Os install , it shows a message

  "BOOT MGR is missing"

  Press Ctrl + Alt + Delete to restart

  -

  -

  I rebooted a hundred times and tried a lot of different types of BONES [e.g Xp, Vista, Windows7, Windows server<2003,2008,2012>& EVEN Windows 8]

  my computer's CPU is Intel Core Duo

  RAM:--2 GB

  supports:-only 32-bit Os

  Please please help me

  Some information has been left (by yourself), thinking that we could just assume you were * or * you don't know may not to do.
   
  If you have entered your BIOS and changed so as to allow it to examine first of ALL your CD/DVD drive for a boot media?
   
  Using bootable media?
   
  You have verified that the media in question are readable elsewhere?
   
  You have verified the functionality of the CD/DVD drive (new does not work or configured correctly)?
   
  When he starts a Windows boot media (CD/DVD) it usually States, «press any key to start from the _...» "and if you don't, it will default to the next media (usually your hard drive) defined in the BIOS to boot from... You are out of this message or does anything about it?
   
  Have you tried to create a USB bootable (Windows 7 for example) and change your boot order to try that first?
   
  What is the brand and model of this system which apparently only accepts 32-bit operating systems (you say that it is new - so I'm curious as to why this limitation exists...)?