Error while installing ESXI

Similar Questions

• Error in installing ESXi 5 on PC

  Need help... when installing ESXi, I get an error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine.
  
  What could be the reason for such reason?

  The parameters must be configured in the host system (HP Pavilion). I don't know how this BIOS looks like, you can search settings (settings of the processor usually). As mentioned earlier, after changing the setting, the system power cycle!

  André

• Failed to load lvmdriver error on install ESXi 4 on a XP pro 64 - bit SP2

  I get the following error on the ESXi installation on the boot cd: "failed to load lvmdriver" (after he went through the installation process of the workload does ' t program).

  ESXi cannot be installed on a machine pro 64 - bit SP2 XP (wih virtualization enabled in BIOS)? What are the requirements for hostsystem material and BONES?

  I want to use it for a productionenvironent,

  In this case, you need to install ESXi on a bare metal system.

  And the system must be in HCL if you want to use for production (just to be sure that all can work):

  http://www.VMware.com/resources/compatibility

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Error while installing Oracle 11 g under Solaris 10 SPARC 2 forms and reports

  We are trying to install Oracle Forms and reports 11 GR 2 (11.1.2.2.0) 64-bit Solaris 10 SPARC 64-bit (U9) and we are facing errors of installation during installation of 11 GR 2 forms. I will note down the environment and steps reproduced to produce errors:

  Environment:

  Operating system: Solaris 10 SPARC 64-bit (U9)

  JDK: Oracle 1.7.0_79 64-bit JDK

  WebLogic: Oracle WebLogic Server 10.3.6 64-bit

  Form & reports: 11.1.2.2.0 64-bit

  Steps to follow:

  1. install JDK - success

  2. installation of WebLogic Server 10.3.6 (64-bit) and created a new home of Middleware. -Success

  3. ensure that all prerequisites are met by a prior information of Oracle: http://docs.oracle.com/html/E25460_01/r2_fr_requirements.htm

  a. all patches necessary OS and packages are installed

  b. There are a lot of disk space, swap, TEMP space and memory (RAM live)

  c. all environment variables are cleaned, as indicated in the prerequisites in the URL

  d. no other product Oracle doesn't lie in the path except for the JDK. (NOTE: Forms 6i is installed in a separate House in the server.)

  e. all software are 64-bit

  f. the user oracle (same user who has installed the JDK and WebLogic) has read, write, and execute permissions for the entire House of Middleware.

  g. we set the LD_LIBRARY_PATH variable to $ORACLE_HOME/lib as indicated in the Doc ID 1643548.1.

  4. start the installer of Forms

  a. choose 'install only - do not configure ".

  b. all the prerequisite checks passed

  Errors: Installation product until it reaches approximately 92% when we get the first error:

  "Error in invoking target 'nnfgt.o' of makefile '$ORACLE_HOME/network/lib/ins_net_client.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".

  If we click on 'Continue' to work around the error, we get another error after that:

  "Error in invoking target 'repeat' of makefile '$ORACLE_HOME/precomp/lib/ins_precomp.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".

  Someone has met these errors before installing 11 GR 2 forms (11.1.2.2.0) on Solaris 10 SPARC 64-bit?

  Thank you

  Scott

  We have solved the problem. The library of expr has not found in/usr/xpg4/bin but in another location. After you create a symbolic link in/usr/xpg4/bin pointing to where it has been deployed, the installation is completed successfully (after removing the previous attempt failed).

  A test you can do to make sure that expr is working correctly is to run expr 1 + 1 in the shell. If the command works, the library can be found.

  Matthew, I thank you for your suggestions as well.

  Thank you

  Scott

• Error while installing Win 8 update on Satellite L955-108

  Been trying all day to install the updates of Windows (all 8), but constantly having * error Code: unable to action * 8024200d

  Never had this problem before on Satellite L955-108

  In my opinion, is that Microsoft related question to verify it please this page.
  I hope that you will find answer here.

  Any comment is welcome!

• Error while installing Windows 7 on Dm4-3170se?

  I just bought a refurbished DM4-3170se. He got in shape without the operating system. When I try to install the Windows 7 it keeps defaulting to the configuration step.

  I have even converted the disk cache raid drive.

  I tried to load the Raid drivers available from intel.

  Two things have failed. If I order the recovery disks it will work? or do I did something else?

  Hello Dealer101.  I understand that you encounter some difficulties in installing Windows 7.

  You try to install Windows 7 on a commercial installation disc?
  
  
  
  What happens when you try to load the RAID driver?  What is the error message that you receive?  Here is a link for the driver in case.

  If you use a normal commercial disc to install Windows 7 I do not pretend to order a set of recovery media.  This should make the process much more as a recovery will install not only the operating system, but the drivers of devices as well.  This should save time that you will not have to scour the internet looking for drivers.  If you are in the United States / Canada you can contact the HP Support to the 1-800-474-6836 for information on the recovery media.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  I'll keep an eye out for your answer.  I wish you a nice day!

• "0xc01a001d (\Registry\Machine\COMPONENTS\DerivedData...). Error while installing Vista SP1, WITH RESTORATION or BACKUP ACCESS FORBIDDEN! ANY CHANCE OF HEALING?

  I rebooted several times Vista since Vista SP1 download.  I tried to get my system prepared for a Boot (as several vital Programs are not yet supported) double Win7.  I keep getting stuck on the "0xc01a001d? / 99216 (\Registry\Machine\COMPONENTS\DerivedData... "error.

  I have saved on an external USB hard disk and do not have the original system disks.

  I downloaded the Vista recovery disk.  On all options, he said that I could not restore.  He could not read the USB key to find the backup point.  He would not even install when I tried to reinstall.

  Y at - it a help to me.  I am a student and can get another copy of Vista from MSDNAA but would go instead by the download time intensive task, to find drivers on the Dell Web site (I have an Inspiron 1501) and reloading everything.

  ALL BOARDS

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Vista.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error while installing windows Xp on my E Aspire 13 ES1-311-C4VK. Error is STOP: 0x0000007E.urgent pls help

  I tried so many times to install windows xp on my Aspire E 13 ES1 boot cd - 311 - C4VK.Xp first, then load something. After that, it shows the error:

  STOP: 0X0000007E (0XC0000005, 0XF73B9D66, 0XF78D9EA0, 0XF78D9BC)

  ACPI.sys - address F73B9D66 base at F73AE000, DateStamp 480252 b 1.

  I need urgent help.

  And another thing, I want that it is not possible to change the sata ACHI to ide mode. Isn't it possible to change?

  Why windows XP?

  It is not longer supported by Microsoft and other SOFTWARE, and it is the best OS to have viruses, rootkits and other infections.

  you will be also problems of drivers/hardware as acpi.sys

  If you need windows XP for some old software, try to use a virtual machine or buy a second hand laptop.

• get the engine deployment error while installing Vista Ultimate 32-bit

  When I try to load vista ultimate I get an error message; Windows game could not reset the deployment engine. To install windows restart installation. then I start again with the same results. Vista can't handle new computers? This is a new computer without an operating system.

  Hello

  1. how you try to install Vista? You install using Setup disc or try to re the image?

  Please check the compatibility of your drive with Vista:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=Seagate%20barracuda%201.5%20TB

  You can use third party software to do a low-level format of the disk, and then try to install Vista once more.

  Important: Microsoft offers no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

   

  If this does not work please get another Vista Installer DVD to install it.

• "Pilot of the reader needs CD/DVD is missing..." "error while installing Windows7 from USB

  Im trying to install Win7 on a new generation of PCs. I have created a bootable USB key as I have no optical drive but when I get to the Setup screen, I get an error saying "needs CD/DVD device driver is missing... »

  -I'm using the USB 2.0 ports (not 3.0) and I tried to a switch port to others as some nets has suggested, but that has not worked. (Ref my Mo is a MSI Z170I)

  -Ive also confirmed that my BIOS is set to AHCI (non-RAID)

  Any ideas of what I could try to fix this or what Im missing drivers?

  Also, when I try to review for the drivers I see only a X: drive that does not have the same directories as on my USB key. For example, I downloaded the drivers SATA of MSI and copied on USB to see if that helps. But when I try to search for it I can not even find the files. Does this mean that my USB is not detected?

  Thank you

  See if that helps the z170 and Skylake use xhci instead of ahci, so you will need a creative tool special iso usb.

  https://Forum-en.msi.com/index.php?topic=261560.0

  If you do not have a win - 7 iso file you can use Chrome and this to get a

  Link was considered as inappropriate by the moderators: p

  See also this for a painless as possible install

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• error while installing linux on vitavm9

  Hello

  I install Linux on VM ware pre-installed 9 installing it I amgetting error

  PXE - E53: no boot file name given

  PXE - MOF: Exit Intel PXE ROM

  Operating system not found.

  I did the mount connected and plugged in but still iam getting the error

  Please help me soon its urgent

  Hi I did the right thing has also selected the power connected and connected on

  in fact I'm taken iso on my local drive not cd, I tried with both but gives me the same error

• Error when installing ESXi 5 on 8 workstation

  Hello team,

  I'm dounia. Recently, I completed my training as a VCP on vSphere 5. But when I try to set up a lab in my personal pc using workstation 8, it gives the VT is not enabled on your processor error. I even checked in my physical syustem BIOS and it has been activated. I disabled it and re-enabled again. Then, turn power off and power on the same. But still the same error. I checked the BIOS settings on the operating system prompted but unable to find VT settings on it.

  I am using Windows 7 32-bit operating system

  Intel i3 processor

  I allocated CPU 2 and Core 2, GBB 50 HDD, 2 GB of RAM to the ESXi.

  Please help me!

  Thank you

  Dounia

  Welcome to the VMware communities forum.

  You will need to tweak the virtual machine a little to get VT crossed at the prompt.

  Workstation 8 / Player 4

  Virtualized HV is available for the hardware virtual version 8 virtual machines on the hosts that support Intel VT - x or AMD - V and EPT of IVR. To activate the HV virtualized, select VM-> settings and access the processor settings screen. Check the box 'Virtualiser Intel VT-x/EPT or AMD-V/IVR.' You will see a warning that virtualized HV will make this inconsistent VM with other VMware products. In particular, if this virtual computer is moved to a 5.0 ESXi host, virtualized HV is available without twist additional.

  For more information, please see this document - http://communities.vmware.com/docs/DOC-8970.

• Error while installing I-200

  Application manager downloads and installs.

  I run the app and it tells me I need to sign in with my adobe ID.

  Then he said:

  "An unexpected error has occurred processing your request. Please try again later.

  "I-200"

  I uninstalled the app and re-downloaded and installed and I still get the same error.

  Any ideas?

  -ben

  Delete the following folders

  "OOBE" and "MBLStore" are in the locations below:

  on Mac: /Users//Library/Application Support/Adobe

  Windows XP: drive: \Documents and Settings\Settings\Application application Adobe

  on Windows 7: drive: \Users\\AppData\Local\Adobe

  Let me know how it goes.

  - Abhishek Maurya

• Validation error: while installing LC ES2.5 on w7 (invalid domain name)

  Hello

  I installed LC ES2.5 on Windows 7 (32 bit, 4 GB Ram) machine. When configuring (Express Mode), I'm stuck at step turnkey JBoss SSL set up. I filled out the fields below.

  

  When I click on JBoss SSL generates a Validation error indicating that:

  Invalid name for the common name. The value must be the fully qualified domain name.

  

  I tried several options but unable to escape.

  I am new to LiveCycle, p rental help.

  Thanks in advance.

  -

  Afonso

  Hi Afonso,

  The SSL configuration step is not a blocker and can be ignored on LiveCycle Configuration Manager. You can also configure and manually activate SSL for JBoss later when you want to. For more information, please see the guide installation and deployment of LiveCycle ES2 using turnkey , section 6.4 page 49. Let me know if you need more information.

  See you soon,.

  Suhas Yan

• Error while installing Oracle e-Business, 9100 user management (ORCL_EBS_UM_)

  I try to install ORCL_EBS_UM_91000 on IOM 9102 and facing the error
  
  "DOBJ. XML_IMPORT_ERROR
  Unknown tag received OBJ_OFFLINED.
  "
  
  When I checked the log
  ERROR, may 3, 2010 17:43:02, 944, [XELLERATE. WEBAPP], class/method: ConnectorInstallProcessAction/importXmlForInstallation/DDM Exception when importing xml meets some problems: unknown tag received OBJ_OFFLINED.
  
  Please help... its very urgent for me... before this I installed around 4 different connectors with questions

  It's almost impossible. It is not on 9.1.0.2 for sure. Perhaps it has not entirely updated IOM. For confirmation of the upgrade, see logs.

  Thank you

  Sunny