Validation in XP pro on a computer problem compaq presario v2000 laptop

Similar Questions

• Wireless problem Compaq Presario CQ62 220 sv here is the solution! for 220 sv!

  Hi, I need help! Fast please I have a compaq presario CQ62 and do not work wireless

  I installed the driver for the wireless, but do not work

  is a BIOS problem? or anithing alse

  Please I need help! Fast!

  Thanks, Alex

  Sorry for my bad English!

  FAST!

  Update > I enter the device maneger and network controller is not installed

  Hardware ID >

  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
  PCI\VEN_10EC & DEV_8171 & CC_028000
  PCI\VEN_10EC & DEV_8171 & CC_0280

  Hello

  First of all, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46940.exe

  When this has completed, restart the laptop.

  When windows has completely recharged, download and install the Realtek WLAN driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46673.exe

  Kind regards

  DP - K

• Network with the computer problems 2000 2d14sw hp laptop

  Hello

  I just bought a hp laptop of 2d14sw 2000 (FreeDOS). I installed Windows 7 64 bit, but all the functions of network (wired and wireless) are disabled.

  I tried to find the drivers, but everything I installed didn't work.

  Devices with problems and the respective IDS are:

  Ethernet controller
   
  PCI\VEN_10EC & DEV_8136 & SUBSYS_188B103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_188B103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
   
  Network controller
   
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280
   
  PCI device
   
  PCI\VEN_10EC & DEV_5229 & SUBSYS_188B103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_188B103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00
   
  SM Bus controller
   
  PCI\VEN_1022 & DEV_780B & SUBSYS_188B103C & REV_14
  PCI\VEN_1022 & DEV_780B & SUBSYS_188B103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05

  I would appreciate your help.

  Thank you

  GeKat wrote:

  Hello

  I just bought a hp laptop of 2d14sw 2000 (FreeDOS). I installed Windows 7 64 bit, but all the functions of network (wired and wireless) are disabled.

  I tried to find the drivers, but everything I installed didn't work.

  Devices with problems and the respective IDS are:

  Ethernet controller

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-118588-1&cc=us&DLC=en&LC=en&OS=4063&product=5447748&sw_lang=
   
  PCI\VEN_10EC & DEV_8136 & SUBSYS_188B103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_188B103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
   
  Network controller
  http://www.Atheros-vendor.com/Atheros-device.php?id=523
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280
   
  PCI device
  Multimedia Realtek PCIe card reader

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  PCI\VEN_10EC & DEV_5229 & SUBSYS_188B103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_188B103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00
   
  SM Bus controller
  AMD SM Bus controller

  http://support.AMD.com/en-us/download/chipset?OS=Windows
  PCI\VEN_1022 & DEV_780B & SUBSYS_188B103C & REV_14
  PCI\VEN_1022 & DEV_780B & SUBSYS_188B103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05

  I would appreciate your help.

  Thank you

  Please post your results.

• No sound on computer PORTABLE Compaq Presario 1200 (12XL512)

  I recently bought a Presario brocante 1200 (12XL512) notebook, when it arrived it had Windows XP Home installed. After some checking, I realized that I had no sound, even if Device Manager shows everything OK.

  I then installed a XP Pro and updated to SP3, once again no sound, but showing all the drivers o.k.If I move the volume slider I hear temporarily, but once I stop this sound going again.

  After searching all over the net, I found there are others with the exact problem, including the volume slider thing.

  From what I understand, that I need a different driver, although one that I showed it is OK.

  I tried the Driver Detective 2009 registered version, and that shows once again all drivers up to date, but still no sound.

  I live also chatted with HP last night, and all they could say was change the laptop to its original operating system was Windows Millennium.

  But I don't have the software for it and to be honest would'nt want to for obvious reasons.

  So nobody knows how to solve this problem, or know the right driver and where I can get it.

  Just say thank you to Daniel & Mariza, for help with this issue.

  But have now opted for the easy out, way could not solve the driver problem.

  For all those out there who struggle with sound as if I was, you can buy a USB sound card and you'll instantly have sound.

  This is a simple dongle with Mic & headphone/speaker output, plug & plays no need for drivers, etc.

  I paid 3.00 pounds for mine (UK seller), but the same thing has been less than 1.00 pound (which includes shipping) if bought from China.

• my computer compaq presario cq56 laptop does not recognize my usb drive hp usb flash drive v195b

  I have a lot of problems with flash drives and card readers that plug about my ports detected usb, I just buy a new drive 16 GB flash (HP) as above is said on this plug and play, but when I plug it I can't, there is no prompt and if I remove usb it doesn't show there either I have about six card readers and they worked when I used them first, but now I think that there is only one that works. Can you help me please?

  What a fool I am, because the new style of USB is a solid piece, it allows you to put it in the wrong way round, which is what I did, but your help led me to the solution. Thank you very much

  Ian.

• Upgrade laptop computer processor Compaq Presario CQ57

  Hi I'm looking on youtube for hours and can not find a guide on how to find processor and replace it someone could give me a step by step on how to do.

  This is an Adobe product, if you look at the bare minimum CPU it takes to run it it says 2.0 GHz.

  http://www.Adobe.com/CA/products/premiere-elements/tech-specs.html

  So with your current system, you would need to upgrade to your processor.

  Here's your guide to maintenance and service.

  http://h10032.www1.HP.com/CTG/manual/c02948186.PDF

  If you look on pages 19 and 20, it shows what will work, but you also need to install a different heatsink of heat/cooling assembly if you move to an i5 (not so easy to find).

  Even if you improve things in general, I think your machine is going to be difficult to run any sort of video editing software, you can consider a better machine.

  You can download any Adobe product and use their free trial version and make sure.

• Compaq Presario CQ56 - :(wireless Internet problem

  Hey everybody,

  So I just joined here to see if anyone can help with my problem, because frankly, I'm out of options now about two weeks asking friends and colleagues and searching the Internet for answers to similar problems. I tried twice with the information I found on this site for quite some time and it does not work for me!

  In any case, I have a HP Compaq Presario CQ56 laptop. It has been implemented correctly when I bought it, everything worked perfectly. I managed to catch a virus that prevented me from even turn on my computer (which is strange, because I'm not a fool with computers, and I know what not to do/download sites to visit), so I had to restart my computer to stock, I used my Windows 7 disc, partitions formatted and installed windows again.

  Now, for some reason it doesn't connects wireless Internet. It connects when I have an ethernet cable connected, but it is not all networks, as shown in this screenshot:

  

  (And also here's a cute Bunny for your pleasure)

  So you see my problem it is very frustrating. I don't know what is the cause, but I guess it must be a driver problem? Which is why I write here, if this is indeed in the wrong section, please accept my apologies.

  Here is an another screenshots that can help, just in case:

  

  If someone could shed some light on the problem for me, or even to resolve, I'd be very grateful it is extremely annoying. As I said, it works fine when I have my laptop connected to the internet, when I'm in College, but when I come on a weekend, I can't put my laptop, because I only WiFi at home.

  Thanks for reading

  Hayley R

  You are the very welcome, Hayley.

  The problem is that the needs of the wireless (network controller) one adapter driver installed and here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  Once you install the driver above, the wireless should work just fine.

  Best regards

  Paul

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• I am owner of acrobat 9 pro and he had to re - download the program from a computer problem but when I get the code of the adobe Web site gives me error invalid serial code.  I use copy / paste to prevent Miss typing the code.

  I am owner of acrobat 9 pro and he had to re - download the program from a computer problem but when I get the code of the adobe Web site gives me error invalid serial code.  I use copy / paste to prevent Miss typing the code.

  Hi Laurent,.

  Please try the steps listed in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html

  Kind regards

  Rave

• Satellite Pro U300 Expansion Chassis problem

  Hello fellow users.

  I am trying to use an expresscard with my satellite pro expansion chassis. Problem is that in Device Manager, I am getting error code 12 for PCI bridges in the chassis and the error code 31 for the PCI bridge on the card I want to use in the expansion chassis.

  I installed latest version of the BIOS but cannot solve the problem.

  Slot for Express card in my computer is fine because I use an Ethernet Express of 1 card G without problem.

  Hunting on the web, it seems that the problem is related to the BIOS being unable to handle the number of PCI bus in the system, refer to the knowledge base article 942959 Microsoft. This article explains the problem and how to Vista and W2008 reslove.

  I am running XP and work around, that they said, does not work. Upgrading to Vista is not really an option as software I want to use is not yet the version for Vista.

  My only options left at this stage are fresh install XP to see if it corrects the problem, or vista fresh install and hope I want to use drivers/software works under Vista.

  Has anyone else seen this problem, got any other suggestions.

  Thank you very much

  Hello

  your problem is unusual, but what I want to know is: which model / manufacturer, what is this expansion chassis?
  It would be interesting since without knowing what we´re talking expansion chassis, it would be difficult to know where exactly the problem could be...

  Greetings

• Satellite Pro A120 (PSAC1E) - TV problem

  Hello
  My laptop "Satellite Pro A120 (PSAC1E)" computer does not connect to any type of TV (digital or analog). I tried many different kind of connections to SCART-VGA to VGA-HDMI. I think something is wrong with the VGA output because apparently the Intel graphic card supports the TV/monitor output as the software driver suggests. However, I can't connect the laptop to an external monitor rather easily and without hassle.
  Someone there has the same problem and if so, do you have a solution to this problem (everything!).

  Thank you

  KAV

  Hello

  As far as I know NOT ALL Satellite Pro A120 PSAC1E are equipped with the video output jack!
  I see you are using an external monitor connector!
  This port can ONLY be used with external display (screen) or a projector, but NOT with the TV!

  The TV can be connected to the s-video port that is not available!

• I have Windows XP Pro on my computer but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  I have Windows XP Pro on my computer tower but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  How to perform a new Installation of Windows 7:
  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  How to do a clean install with Windows 7:
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Migration from XP to Windows 7 Easy Transfer and a USB key:
  http://www.howtogeek.com/HOWTO/3179/migrate-XP-to-Windows-7-with-easy-transfer-and-a-USB-drive/

  Windows Easy Transfer for transferring from Windows Vista or XP:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  If the family Windows 7 product key was already activated, you need to activate by phone. Both your XP COA / product key and Windows 7 very practical key product and then activate by phone following the steps below.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• 5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit.  "Problem retrieving some files.  Check space abailable, etc.. "Worked OK on Windows 7 64 bit.  400 GB of available space.

  5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit.  "Problem retrieving some files.  "Check available space, etc. and the privaleges of Scripture on the destination folder. Worked OK on Windows 7 64 bit.  400 GB of available space.  Tried changing the compatibility of Wiindows 8 and 7, but same problem.  I am the administrator, so there should be no problem of privileges.

  Clear your tmp folder.

  Restart your computer

  replace.

• No valid MX was found - is this a problem for my own hosting service or Thunderbird?

  I can send emails anywhere EXCEPT to [email protected] - when I get a failure message "No valid MX found".
  Is this a problem with Thunderbird or 1 with & 1 Internet hosting my email address?

  I hope someone can help me. I need to know how to fix it!

  Thanks to you all.

  If it is a new area, it could take days for all the necessary name servers get all the DNS records that they need. However registration in 2014 would indicate it is not this new http://www.dnsstuff.com/tools#whois| type = domain & & value =southcoaststeel.co.uk

  I'm guessing that your e-mail provider has an old record of server name without an MX record. Although the MX record support for the field is quite uneven see http://www.dnsstuff.com/tools#ispCacheLookup| type = domain & & value =southcoaststeel.co.uk& & recordType = MX

  They have a MX now, although the domain configuration does not appear to be other issues such as no record has. See http://www.dnsstuff.com/tools#dnsReport. type = domain & & value =southcoaststeel.co.uk