No valid MX was found - is this a problem for my own hosting service or Thunderbird?

Similar Questions

• OS5 stops Javascript when the backlight is off or time > 10 seconds - is this a problem for the WebWorks applications?

  I read that the OS5 browser stops all scripts once the backlight turns off, or if the script takes longer than 10 seconds to run. The problem is that the scripts will automatically restart (!). I really hope this isn't the case for the WebWorks applications, I can't have the app stop working if the backlight turns off. If the general development of BB moves towards HTML5 and JS and expects to have success, this kind of problem cannot exist.

  WebWorks for OS5 doing?

  No, this time-out does not occur for applications WebWorks... only for pages running in the browser.

• Serial number you provided is valid, but calling it a product was not found on this computer

  I try to install LR6.  I have a valid serial number, but during the install process, I get the following: serial number you provided is valid, but calling it a product was not found on this computer.

  Duh! It's because I'm trying to install it on this computer!  How should I proceed from here?  I have a HP Pavilion laptop with Windows 10.  I LR6 installed on my other computer, which is a desktop HP Pavilion on Windows 7, and now I want to install it on my Lap Top.  Can someone explain what is happening here and how to fix?

  you will need serial number of your previous version.  There is no work around.

  There may be ways to recover serial number depending on whether lr5 is currently installed on a computer (old) or you bought lr5 where saved from adobe.

• Validation problem: Lightroom 6 ' serial number provided is valid, but calling it a product was not found on this computer.

  I downloaded and installed 6 Lightroom to my new computer.  It will not be validated.

  I get a message "Serial number provided is valid, but calling it a product was not found on this computer.

  You have entered a serial number update for version 6.

  To verify that you qualify to use the serial number upgrade, Setup Lightroom 6 tried hard disk for a previous version of Lightroom installed.

  Because he could not find a previous version, it is now asking you to enter the serial number from a previous version (version 5 or earlier) so that you version 6 update serial number can be accepted.

• I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed] is valid but the product was not found on this computer HELP!

  I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed by Mod] is valid but the product was not found on this calculation? Help!

  More information about this error is also available onhttp://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html who can refer you to contact support if necessary.

  Concerning

  Stéphane

• Could not load the LR 6 on my laptop - I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."  I downloaded, from the Adobe Web site and given the serial number when I bought L

  I'll put up a new Macbook Pro the retina, bought this week, and try to install the copy of LR 6 I bought in September 2015.  It is currently loaded on my old Macbook Pro.  I understand that my license allows me to install this on two machines;  This is particularly important now that I move from an old machine to a new one.

  I downloaded the complete file of the LR6, but when I try to install, I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."

  I gave the serial number under my account on the Adobe website and delivered when I bought LR 6 September 2015.

  It is said to "Select a product", but only gives me options of Lightroom 1-5, not 6.  My new LR 6 license is useless just 6 months after purchase?

  I opted to buy 6 LR on perpetual license rather than a subscription monthly CC, as my country's currency is devaluing rapidly and I need to be able to afford access.  But now Adobe does not seem to recognize the validity of the copy that I own.  In fact, it is difficult to find a reference to LR 6 on the Adobe web site.

  Can anyone help?

  Thank you

  It shows the message you have purchased an upgrade license, and it asks you to select the older version that you upgraded and provide older version serial number as proof that you are eligible to use the upgrade.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the ProX1 op

  I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the option ProX1.

  Hi Carl,

  It seems that you have installed Acrobat XI pro as an upgrade and an upgrade you will need a serial number for a product older Acrobat X, etc. 9:

  See, error: "this serial number is not for a product calling it" | Adobe Creative Suite

  Also, I checked with your Adobe ID on the forums and I can only locate XI of Acrobat pro upgrade recorded, please check if you have registered an earlier version of Acrobat on some another email to get this serial number.

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Try to reinstall 6.1 ELS ' serial number you provided is valid, but calling it a product was not found on this computer. "

  Try to reinstall 6.1 ELS ' serial number you provided is valid, but calling it a product was not found on this computer. "

  I installed from a version upgrade, but I'm recovering from disk crash so I don't have a previous version.

  I know there are way to recover/override as has already happened.

  The installation process is supposed to give you a place to enter your previous serial number if the previous version is not actually on the computer

  https://Accounts.adobe.com/ , then click on Plans & products above for your serial numbers

• First Pro CS6 license not recognized - "serial number provided is valid, but calling it a product was not found on this computer."

  I have a new computer and tried to get the first Pro CS6 installed. I have a license first Pro "Version 6"Windows - I can see in MY PRODUCTS. So downloaded installation for first Pro CS6 "old downloads" page - when I put in the serial number, it says ' serial number provided is valid, but calling it a product was not found on this computer. "there is a"select a product"drop down and the only thing on the list is Pro Prem CS5.5 - when I put in the liscence here It says invalid. Just to try, I downloaded the installation for CS5.5 and who does not accept the license at all. What can I do to get the CS6 running on my new computer?

  A bit of history which could be related, I remember that I originally bought first Pro CS5 from someone on ebay, not knowing that it was a Mac version, which would not work on my PC - so I contacted Adobe and upgraded to CS6 for Windows at a lower cost. I see in MY PRODUCTS there is a serial number for the two "Adobe Premier Pro" version 5 for MAC and Version 6 for Windows.

  Help is appreciated!

  Mike

  It asks you to select a product, qualifying, which is that you have you upgraded

  IF you do not have a serial number for a product that you upgraded by using the same platform, please contact our support staff.

  To contact support for a serial number or activation number, please click on the link below:

  (be sure to connect to adobe.com with your Adobe ID first)

  Serial number and activation support

  Guinot

• Error message: serial number you provided is valid, but no product qualifying was not found on this computer

  After deactivation of license on iMac and want to reinstall on a new MacBook Pro, I got this error message: serial number you provided is valid, but no product qualifying was not found on this computer

  In fact the steps provided by Kglad are accurate.

  Kappes please check software licenses which you have saved in your account at http://www.adobe.com/.  You can find more information on how to locate your serial numbers to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  You want to locate your serial number upgrade, but your serial number of the previous full version eligible as described by Kglad in the #1 message.

• I get the message "serial number you provided is valid, but calling it a product was not found on this computer" when I try and install Acrobat Standard XI

  I have a PC with windows 7 installed.  Reader Acrobat X and XI of Acrobat Pro trial version will work perfectly.  I bought Acrobat Standard XI, and there is a serial number in my account.  Acrobat Standard XI installs fine, but I get the error message after you put my serial number in, 'serial number you provided is valid, but calling it a product was not found on this computer.»

  The message indicates that you have purchased a version upgrade of applications and it asks you to identify the previous version of this application you are upgrading, and then provide serial number.

  If you had no intention to buy a version upgrade then you will probably cancel that and buy it at the price high.

• Serial number you provided is valid, but a qualification was not found on this computer

  I want to install again the cs6 Adobe Production Premium that I have, but when I enter my password, it says ' serial number you provided is valid, but a qualification was not found on this computer. Another user has had this problem but it was resolved to privatly. How can I use my software?

  You try to install the upgrade from Production Premium CS6 version that requires a previous version of this production.

  Fortunately, you have the production premium CS5 full version also bought & registered.

  You must install this ir resrespective serial number because it is installed on this system or not.

  You can get the serial number in your account from www.adobe.com.

  Concerning

  Baudier

• EAP - SIM: 'no. VALID CARD or DRIVE WAS FOUND.

  I have a Windows 7 Professional running on my laptop with Intel® Centrino® Advanced-N 6205 WiFi adapter that supports EAP - SIM.  I have a card reader SIM aid who can't seem to connect to a network with respect to the inserted SIM card. (In the Device Manager, am able to see my network card). Now trying EAP - SIM authentication but I make "No. VALID CARD or DRIVE WAS FOUND.  Please suggest me a solution saying: how, until the interface and running sim card? How it can be made available for EAP - SIM reader?

  Hi Robert,

  I suggest you contact Intel e with respect to this issue, because they are the right forum to answer your query and help you further:

  http://www.Intel.com/content/www/us/en/blogs-communities-social.html

  For reference:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  I hope this helps.

• Help! Could not resolve the address of the server: the requested name is valid, but no data of the requested type was found.

  Hello

  So I started with a Horizon view, so I apologize if this is a noob question. I wanted to try to put a security server in our DMZ, but before I put it in the DMZ I wanted to test whether customers would be on our network. So here's my setup:

  Overview of VMware View Administrator 5.3.2 generation-188719

  Same version for security server.

  Windows Firewall is activated 'On' on all profiles on security and the server connection. (this might be important later)

  Laptop with Horizon installed Client, Version 3.2.0 build-2331566

  IPad Air2 with Horizon Client Version 3.2.0 build-2331566

  On the Administrator display > display Configuration > Security servers > change on the Security Server

  I PCoIP Secure Gateway set to the IP address of the Security Server (say its 192.168.1.10:4172)

  Connection servers > edit on the login server

  I also have the Security server defined as PCoIP Secure Gateway (192.168.1.10:4172)

  Yet once I wanted to test it before I put it in the DMZ

  So when I connect with the iPad, it works fine, I can connect, see all my connections and connect to just fine.

  On the laptop, when I try to connect, I get the login screen where I put my user name and password (correctly, I might add ) and when I try and I get a connection error.

  "Error: could not resolve the address of the server: the requested name is valid, but no data of the requested type was found."

  I found the article KB VMware goes around the question: KB 2085365 (without help)

  I changed the Secure Gateway on both safety and the connection to the server at each IP I can think of, but it still does not work.

  Can someone give me an idea what can be wrong?

  What is my firewall to connect to the server? (I don't remember if I had turned on firewalls when I installed the login server while they could not properly configured summer when I install?)

  Any help would be amazing!

  Thanks for reading!

  I found the problem, it turns out that the network port to the Security server has been set for public and not private in the firewall. Thanks for the help!

• ESX 3.5 U4 - VCB error "another error: the requested name is valid, but no data of the requested type was found."

  I am running the following commanline...

  'C:\Program VMware Consolidated Backup Framework\vcbmounter.exe' h vimlab.ourdomain.com u Administrator password - a 192.168.1.104:winxppro01 - r C:\mnt t fullvm Pei

  2010-03-23 01:00:52.921 "BaseLibs" 3448 info HOSTINFO: See Intel CPU, numCoresPerCPU 1, numThreadsPerCore 2.

  2010-03-23 01:00:52.921 "BaseLibs" 3448 info HOSTINFO: numPhysCPUs is 0, bumping at 1.

  2010-03-23 01:00:52.921 "BaseLibs" 3448 info HOSTINFO: numCores is 0, bumping at 1.

  2010-03-23 01:00:52.921 "BaseLibs" 3448 info HOSTINFO: This machine has 1 UC physical and carrots 1 1 logical processors total.

  2010-03-23 01:00:53.687 "BaseLibs" 3448 info Using the libcrypto, version 90709F

  2010-03-23 01:00:53.687 "vcbMounter" error 3448 Error: Another error: the requested name is valid, but no data of the requested type was found.

  I'm still new to VCB, so I don't know technically what I do. The vmdk files reside on an iSCSI Lun and I point the Server 2003 Windows VCB to the LUN using the MS iSCSI initiator and he see LUN. It see it as "Healthy (Unknown Partition)", but it see IT. My guess is that it should be able to see the files in the iSCSI LUN?

  Anyway, just my SWAG (Scientific Wild Ass guess).

  Using the '-san m "switch gives the same.

  Any help on this is appreciated. I'm just trying to do a full backup of a virtual computer.

  no doubt the '-a ' option does not. You must use it as '-a name:

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.