Value required not pulling

Similar Questions

• Get-VMStartPolicy receives an error: 'value required 'systemDefault' is not found.

  I'm trying to get all the virtual machine to a VMHost, who 'None' StartAction.

  [ESX Server > > Configuration tab > > Machine virtual Startup / Shutdown]

  I used the following command:

  Get-VMStartPolicy - VMHost < hostname >. Select the virtual machine, StartAction | Where {$_.} StartAction - eq 'None'}

  My problem is now, we have about 20 ESX host and for 17 of them, the command runs.

  For 3 of them, I got the following error:

  Get-VMStartPolicy: 07.05.2015 11:51:33 Get-VMStartPolicy asked "systemDefault" value was not found.

  On line: 1 char: 1

  + Get-VMStartPolicy - VMHost < host name >

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [Get-VMStartPolicy], VimException)

  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.GetVMStartPolicy

  In addition, I tried the following command:

  Get-VMStartPolicy - VMHost < HOST name >

  An example of a successful ESX Server:

  Get-VMStartPolicy - VMHost "Server1."

  StartAction StartDelay StartOrder VM

  VM1 PowerOn 120 (pop.) 1

  VM2                              PowerOn 120 (pop.) 2

  An example of a failure of ESX Server:

  Get-VMStartPolicy - VMHost "Server2."

  Get-VMStartPolicy: 07.05.2015 12:10:51 value Get-VMStartPolicy asked 'systemDefault' was not found.

  On line: 1 char: 1

  + Get-VMStartPolicy - VMHost Server2

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [Get-VMStartPolicy], VimException)

  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.GetVMStartPolicy

  Other commands such as "Get-VMHostAdvancedConfiguration - VMHost 'gbczbesx01.company.internal' work properly for the affected servers."

  Can someone tell me what the above error messages means?

  And why this command fails for some hosts?

  Thank you.

  [I am using this command in a powershell script]

  I got the following response from VMware Support:

  "There is an internal PR opened with genius for that matter but I see that it has not been updated since last year. Engineering do not have priority in this issue because of the availability of a workaround. (manually change the lowercase S to uppercase) it is unlikely that I'll have an answer to your questions anytime soon. I ask questions to them and tied the case to PR. As soon as I have no information for you, I leave you, you know. I don't expect that it may take some time because a fix for this will have to be coded in a future release. »

  The following workaround may correct the above error message:

  Edit the VMAutoStart.xml (in/etc/vmware/hostd) and look for entries "systemDefault" ("s" tiny) and replace it with SystemDefault (capital "S").

• Medium need to return false if a value has not yet been written.

  I am a new user of labVIEW here looking for a way to return false if the value has not yet been written.

  I am using the "select" tool to swap between values early enough in my simulation. However, it requires data that has not happened yet, so I need something that is waiting for the value to write.

  Is it possible to use a while loop to wait until TRUE or FALSE (instead of NULL) has been written and then change the frequency?

  All instances of data in LabVIEW (controls, terminals, constants, shift registers etc.) have a value, there is no concept of NULL.

  A Boolean control, before write you, will be its default value (probably false). A string will be empty (but not NULL, it is always valid). A digital will be zero, a reference is not valid (possibly equivalent to NULL, but this terminology is not used.)

  Can you describe your needs more detail, I don't understand what you need to do.

  If you want to wait for a change in value (Boolean to change true), then survey (read several times) from the Terminal command in a while loop with it connected directly to the terminal of condiitional. Its default value of False will cause the while loop loop continuously until the value is set to True. I would advise to insert a short wait inside the loop so that it hoggig a CPU.

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• Reset the default value does not

  'Reset to the default value' does not work for my ListBox multicolumn, but it works for my string flags.  Someone at - he never encountered this before?

  I tried to remove all the elements and setting "default value to', but after another execution of the program, still not reset to nothing.  I have to do it programmatically in my code, and I can't do using the server reference VI Reset at the same time.  I have to define arrays of strings individually to null.

  I use a large number of nodes of property in my loop of consumer to read/write the values in the front panel.  Not sure if this is related.

  Thank you.

  This occurs because the value of a multicolumn listbox is a digital scalar or table (depending on the selection mode of the control) Express which line or the currently selected cell.

  "Reset to default" only resets the values and no other properties. In this case, it is the property of ref that hosts that we consider intuitively the value of listbox mc, but it's not.

• Structure of the case: selector values are not unique

  Get the error: case Structure: selector values are not unique...

  With the help of producer-consumer architecture w / SW-events and comms of queue.  DevSuite - LV2014

  My loop of consumers use a typedef for case selection control.  The typedef is an enum and the names of text for each value.  All my files are in quotes and there are no duplicates in the typedef or structure of the case.

  Help

  JF

  Jeff.F wrote:

  Get the error: case Structure: selector values are not unique...

  With the help of producer-consumer architecture w / SW-events and comms of queue.  DevSuite - LV2014

  My loop of consumers use a typedef for case selection control.  The typedef is an enum and the names of text for each value.  All my files are in quotes and there are no duplicates in the typedef or structure of the case.

  Help

  JF

  I don't know what you're doing exactly what I think. Do not write text in quotes for values box. Wire the enum in the switch case, right-click on the structure of the case and select "add a case for each value.

  It might be a little different because I'm teliing memory.

  Ben64

• No sound! Driver of Bus Audio HDA required, not found

  I recently re-installed Windows XP on my computer Dell Dimension desktop and downloaded every update is available from Windows Update. All right, except that I have no sound.  In the device manager under "Other devices" with a yellow question mark is multimedia Audio Controller.  I know that I need the ADI 198 x integrated Audio driver I can get from the manufacturer's website, but when I try to download it I get the following error:

  Driver of Bus Audio HDA required, not found

  I have tried everything to solve this problem, including the automatic adjustment on this site (which has not detected a problem) AND download a patch for Windows XP, which is available here: http://support.microsoft.com/kb/888111.  The problem is that there is no fix for XP with Service Pack 3 users! At this point, I am at my wits end and nothing seems to work.  I appreciate any help you could give me. It feels like I tried all the solutions, but I'm open for anything at this point. Thank you!

  If you will forgive the play on words, using MS Update is not the way the most up to date to get the latest drivers for your audio device.

  You go directly to the Dell support site and get your machine of Dimension, and then download the necessary drivers. If you get an error message during the installation you may have inadvertently downloaded the wrong driver.

  Try again or re-post giving Dell Dimension model number.

  See you soon,.

  Jerry

• codec error, I get the message (file cannot be imported because the codec required not installed) how to install appropriate codec?

  original title: codec

  I have windows vista Home premium.  I get the message (file cannot be imported because the codec required not installed) how do we install the right codec

  ... How to install appropriate codec

  There is an excellent set of codecs available here.

• iDRAC error on PowerEdge R720 (SWC0700: iDRAC is not ready.) The configuration values are not available.

  My PowerEdge R720 started with iDRAC Initialization Error as topic above.

  SWC0700: iDRAC is not ready. The configuration values are not available.

  Noise of FAN after pressing F1 to continue. Please what can I do? It's my edge transport server and it is now off to find out what needs to be done. Please notify.

  Been,

  Network administrator,

  ExecuJet Aviation Nigeria.

  Hello, I'll email you to ask for the serial number. Thanks Marco

• Added system ok but as far as I know, powerUp listener not pulling

  Hey. My application, in main(), adds a listening on starting system to cold (battery replaced), without error. However, the powerUp method below does not pull when I switch off my BB and sur-Appuyez the red end button for 5 sec and press once again (a warm start). How do you get powerUp to call? Code is below.

  MSL MySystemListener = new MySystemListener();
  MonthlySpend ms = new MonthlySpend();
  ms.addSystemListener (msl);

  private static class MySystemListener implements SystemListener
  {
  public void batteryStatusChange(int a) {}
  public void batteryGood() {}
  public void batteryLow() {}
  public void powerOff() {}
         
  public void powerUp() {}

  PerformAnyReset... schedule, calls so if not reset, don't program twice
  If (!.) PerformAnyResetWhichWasScheduledWhilePhoneWasSwitchedOff())
  ScheduleTotalResetForStartDateOfNextBillingCycle();
                                 
  SetIconAndTitle();
  ScheduleIconUpdateOvernight();
          
          
  String logMessage = "Warm" started
  If (EventLogger.logEvent (0x4c9d3452d87922f2L, logMessage.getBytes (), EventLogger.ALWAYS_LOG)) {}
  System.out.println ("Log successful!");
  }

  Hey - fixed. The application itself must be a SystemListener, not another class

  J

• When I try to "Optimize the readers", I get "Value is not available" on a SSD

  I am running Windows 8 Pro. I can't optimize my SSD. I read online that I should be able to click on "Optimize" and who would send my SSD TRIM data in order to improve its performance. But currently "Analyze" and "Optimize" buttons are grayed out for my solid state drive. The current state also show "optimization is not available.

  Thanks for any help.

  Same thing here.

  Went to Windows "Optimizing disks", click on optimizing, but he said "Value is not available" and then the button "Optimize" changed in gray.

  When I manually ran the automatic Maintenance (Control Panel > Action Center > maintenance > start maintenance), I noticed a lot of reading and writing for the SSD during the maintenance process.  So I opened 'Optimize the readers' and he has done exactly as she was running the Disk Defragmenter (despite it, grateful that he was a Solid State Drive).  I looked in the resource monitor to see what that wrote for the SSD and I don't remember the exact name of the process, but it was something with defrag in the name.  I had already done Windows Experience Index before that, then Windows knew that an SSD has been installed and it showed as such under 'média Type', so I don't know why it was running a disk defragmentation.

  I just ran the automatic Maintenance again, but this time it doesn't seem to be running defrag as it did the first time I ran it.  But, it continues to display "Value is not available" to optimize disks.

  Then, when he says "Value is not available", which means exactly?  DisableDeleteNotify showing 0 (indicating the PAD is on), but is windows sends always TRIM wants the SSD or not?

• OBIEE error - Datetime-01-01 value does not match the specified format

  I get this error after the promotion of Production. It works perfectly well on the Test Server.

  I am using SQL server. After launching the date as a varchar, it works fine.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046]-01-01 Datetime value does not match the specified format. (HY000)

  Gurus of OBIEE please help

  JD

  I found the solution as well.

  The Windows Server ODBC driver was old (Version 6). I have who has upgraded to SQL Server Native Client 11.0 and everything works fine.

• "OS requirements not met" in soundcards 10

  I bought the Photoshop 6CD in room light. I received a message "not respected OS Windows Vista requirements" not supported. I am running Windows 7, but nevertheless I downloaded Windows 10 m and installed it. I always get "no respected OS Windows Vista not supported requirements". Any help? I could use it!

  About Vista, but is not https://forums.adobe.com/thread/1836232

• ERRORS AFTER UNINSTALLING ALL of the cs5.5:Exit Code: 7 - Summary - 1 fatal Error (s), 3 (s), 6 warnings WARNING: DW065: display the requirements not met for {60E59A6C-7399 - 495 A - B8}

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 3 (s), 6 warnings

  WARNING: DW065: display the requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}

  WARNING: DW065: display the requirements not met for {23767F5D-A80C-4264-B8EA-ED4085FC332A}

  WARNING: DW065: display the requirements not met for {DDBDE7B0-6FC4-40B1-B673-66EEE8CB60CF}

  WARNING: DW031: payload: Adobe XMP panels CS5 3.0.0.0 {2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} has been updated and has been selected for repair. The {42774483-D33C-46F7-8B20-FD0B1A3DAC25} patch Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 are uninstalled now.

  WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The {A189C479-C7CD-4E08-8CCF-D999B68C0C71} patch camera profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 are uninstalled now.

  WARNING: DW031: payload: Photoshop Camera Raw 6.0.0.0 {37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} has been updated and has been selected for repair. The {FD58D99B-9927-4226-8E00-959A4F76BD89} patch Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 are uninstalled now.

  ERROR: DW020: found payload conflicts and mistakes:

  ERROR: DW020:-Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX must be installed.

  ERROR: DW020:-Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin must be installed.

  FATAL: DW020: conflicts were found in the selected payloads. Stop the installation.

  -------------------------------------------------------------------------------------

  What to do now?

  end of message.

  Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

• I'm trying to convert a PDF to a word document and the system tells me that I must pay.  The account must be active and does not require not renewal until mid-February of this year.

  I'm trying to convert a PDF to a word document and the system tells me that I must pay.  The account must be active and does not require not renewal until mid-February of this year.

  Hi louiset79309343,

  Have you tried the https://cloud.acrobat.com/exportpdf online option?

  I checked your account, you have an active subscription for the service to export it to Adobe PDF format.

  Kind regards
  Nicos