Values of the indicator of multiple Points in a program

Similar Questions

• Drag the control example and how to record a value of the indicator?

  Hello world

  I want to drag the Boolean buttons on my front panel in the time of execution, how can I do?

  I remember that I have seen an example or why, it's a map on the front panel, but I don't remember the name TT someone knows?

  and the second question is how to store a value of the indicator, like the first time, you set the value and close the vi and run it again, the value will remain unless you change in the second run time?

  Thanks in advance

  Thanks to you two, are there good examples of mouse followed the structure of the event available?

  and my second question is for example: read a file using the vi, I created the first, that the value of all the positions of the button on the front panel, and the 'get file vi extension' shows the name of the file on the front panel. then I close the vi and open it again, the button positions is always there where they are, but the file name string is empty.

  How can I save the filename so indicator when I opened that vi still once, if not the other position button file selection, the filename indicator still shows the previous name?

• the value of the indicated guides is diffirent value matching of the sovereign.

  

  the value of the indicated guides is diffirent value matching of the sovereign.

  The 1627px refers to the width of the work space. But if you design your page using fixed coordinates, then you have trouble. Web sites are displayed in a wide range of devices, where you provision would be completely different on a TV screen, as well as on a mobile phone and anything in between.

  Take a look at know how to make and style of a sensitive web page in Dreamweaver. Adobe Dreamweaver tutorials CC

• Need to customize the update of merger based on the value of the indicator.

  I want to write a custom update statement based on the value of the indicator. Is it possible that I can achieve this by using CASES? Please let me know.
  
  Pseudo-code ARY.
  
  
  WHEN MATCHED THEN
  
  CASE WHEN FLAG = "Y" THEN
  GAME UPDATE
  cout_column = cout_column + mrgqueryCounts,
  date_column = sysdate;
  ON THE OTHER
  GAME UPDATE
  cout_column = mrgqueryCounts,
  date_column = sysdate;
  END
  
  
  Thanks and greetings
  Nana
  
  Published by: Nana Akkivalli may 2, 2011 23:07
  
  Published by: Nana Akkivalli may 2, 2011 23:46

  Nagaraja Akkivalli wrote:
  Thanks for your reply, Grosbois.

  I do not want to write a case statement for each column, as there is a lot of update statements. Instead, I want to write a case statement once. Is it possible that we can do? Please let me know.

  WHEN MATCHED THEN

  CASE WHEN FLAG = "Y" THEN
  GAME UPDATE
  cout_column1 = cout_column1 + mrgqueryCounts1,
  cout_column2 = cout_column2 + mrgqueryCounts2,
  cout_column3 = cout_column3 + mrgqueryCounts3,
  date_column = sysdate;
  ON THE OTHER
  GAME UPDATE
  cout_column1 = mrgqueryCounts1,
  cout_column2 = mrgqueryCounts2,
  cout_column3 = mrgqueryCounts3,
  date_column = sysdate;
  END
  Thanks and greetings
  Nana Akkivalli.

  Nana, I know, you can't do it, as you requested. I also checked some documents Oracle and could not see such use for the CASE statement.

  concerning

  Grosbois

• changing the value of the indicator

  I need to change the value of an indicator, while the program is running.

  I enclose a VI

  1. a double is given as input to find derived from ptbypt, and then I compare the derivative (threshold) to enter the value to give a Boolean result.

  I need the user to change the threshold value as required by him.

  Thanks in advance

  Well, use the property node.

  Ran

• Maintain the value of the indicator after the threshold is exceeded

  I have a part of my VI using an auto indexed for loop to display an array of 10 values boolean indicating if a threshold test has been exceeded.  If a false value is received on any one of these 10 channels, I need to have a light, the temperature of this channel.  The problem I have is that the false values continue to update the value of the temperature, rather than keep the temperature when the threshold has been exceeded.

  Research on discussion forums, it seems that maybe a shift register is how it is done.  Add 10 records to offset which allows me to watch the last value for each channel, the best way to handle this?

  Sounds like a job for a Feedback node.

  

• Extract the value of the node with multiple namespace xml

  Hello

  I have to extract values in xml that includes several namepspaces. a single namespace has value of xmlns. I managed to get the value of the node for tag event where as info tag returns null.

  experrts need help.

  <? XML version = "1.0" encoding = "utf-8"? >

  < event xmlns = " " http://www.w3.org/2001/XMLSchema-instance ' >

  < data xmlns = ">

  < object >

  < eventtype > 110 < / eventtype >

  < result > < / result >

  < / object > < / data >

  < xmlns = info "> < jref > JREF < / jref >

  < / info >

  < / event >

  SELECT

  TMX.eventtype,

  TMX.result,

  TMX.jref

  of EXAMPLE_MESSAGES1.

  XMLTABLE (XMLNAMESPACES (DEFAULT 'http://www.w3.org/2001/XMLSchema-instance'), )

  ' for $i in/event/data/object

  Returns the local item: r {$i / eventtype,}

  $i / result.

  {$i / jref}'

  EXAMPLE_MESSAGES1 OF PASSAGE. XML_MESSAGE

  COLUMNS

  EVENTTYPE VARCHAR2 (30) PATH "eventtype"

  RESULT VARCHAR2 (30) PATH 'result ',.

  TMX JREF PATH VARCHAR2 (30) 'jref');

  Version of the database is 11.2.0.3.0

  Hello

  I have to extract values in xml that includes several namepspaces.

  There is only one workspace names in fact (the default value).

  Normally, an empty xmlns UN-declare a default namespace declaration is inherited from the parent node.

  So, in your example, only node belongs to the default namespace.

  In this case, when you have to walk through the nodes belonging to some namespaces and others in any namespace, do not use the DEFAULT option in the WITH XMLNAMESPACES.

  Instead, declare a prefix and use it as needed for qualify of nodes.

  Another thing:

  Returns the local item: r {$i / eventtype,}

  What what do you want with "local:" here?

  The following should give the expected results:

  SELECT TMX.*

  of EXAMPLE_MESSAGES1

  XMLTABLE)

  XMLNAMESPACES ("http://www.w3.org/2001/XMLSchema-instance" as "ns0")

  , ' / ns0:event'

  EXAMPLE_MESSAGES1 OF PASSAGE. XML_MESSAGE

  COLUMNS

  EVENTTYPE VARCHAR2 (30) PATH 'data, object, eventtype.

  , RESULT VARCHAR2 (30) PATH ' object/data/result '.

  , PATH of VARCHAR2 (30) JREF ' info/jref.

  ) TMX;

• How to fill in the value of the MULTISELECT downtown SHUTTLE point

  Hello
  
  I have 2 items
  
  P1_TEXT1 - multiple selection
  P1_TEXT2 - shuttle
  
  I have populated the value of P1_TEXT1 (multiselect) and you want to assign the same value to P1_TEXT12 (shuttle)
  I use the following Javascript function to assign the value of P1_TEXT1 to P1_TEXT2, but it does not work?
  

  $x('P1_TEXT2').value = $x('P1_TEXT1').value

  Thank you
  Deepak
  
  Published by: Deepak_J on December 4, 2009 15:28

  Hello

  I think it's ok. I don't see a problem.
  You can do bit shorter by removing a few lines that you declare the g_myShuttle variable start code.

  
  
  Br, Jari 
  

• Value of the indicator updated after the 2nd round

  Hello

  I have this vi statistic that calculates the various things. One of the indicators is updating its value only in the second inning and not in the first round, I'm puzzled as to why it happens. I tried to use the flat sequence, but it still does the same thing.

  Any ideas?

  Thank you

  simply_me wrote:

  Hello

  I use the local variable just to avoid spending the son anywhere in the block diagram. I'll clean the block diagram.

  BAD IDEA!  Use threads.  Reading this thread.

  If that is the question, how is flat sequence did not work when I tried it (just out of curiosity)?

  I need to see your code with sequence structure flat instead of knowledge.  I guess, you don't have the structure of sequence positioned the way you thought you did.

  Thank you

• Value of the attribute of multiple Menus rings

  I have a VI with many rings Menu and I have to do all the, and then display the value at position 0. Is it possible to do in then all at the same time, without making a relevance for each ring of Menu node?

  Thanks for the help,

  Marcus

  You could make a table of references and send to a Subvi, which has a loop on the inside. Have a control that sets off the references. In this way, you have all bundled up in a Subvi verses all the controls.

• Load data from an intermediate table into a real table by using the value of the indicator

  I need a code quick and dirty pl/sql to read the intermediate table ' STG_TABLE, line by line and load data into a PROD_TABLE.» The load should fail altogether, is a restoration should occur when he there an error occurs during registration to insert into a table of production using a flag value of Y as outcome and N as a failure.
  Any suggestions?

  Hello

  It seems that if you want something like:

  BEGIN
      :ok_flag := 'N';
      INSERT INTO  prod_table (col1, col2, ...)
       SELECT               col1, col2, ...
       FROM     stg_table;
      :ok_flag := 'Y';
  END;
  

  RESTORATION is done automatically in case of error.

  Instead of a link to ok_flag variable, you can use another type of variable that is defined outside the scope of this PL/SQL code.

  Published by: Frank Kulash, June 5, 2012 22:47

• At all indexes on tables of the same value in the structure of the event

  Hello

  I have a panel with the four bays and I use a structure of the event.

  Now, I want that change of the index of array_1 also affects the index of 3 other tables at the same index.

  But there is only a property "value Exchange" and no property 'index-change' in the properties of the table.

  So I read the 'index' property and write in the other table.

  But: It seems as if I have to do so within the period of waiting-section of the structure of the event.

  Is there another way to do this?

  Thanks for help

  You can use the mouse event on each table to detec the event (of course, that will attract not only a change of index, but I don't think you care too) and then use the 'values of the indices' property on all the table to set.

  See annex VI (LV2012), hope this helps

• How to get the value of the tree node without reloading the Page. !

  Hello
  I worked with apex 4.2 and I've created trees and as a table to retrieve the date according to the value of the tree node select the code tree something like that
  
  {
  Select case when connect_by_isleaf = 1 then 0
  When level = 1 then 1
  of another-1
  end the status,
  level,
  'ENAME' as the title,
  NULL as an icon,
  'EMPNO' as value,
  NULL as ToolTip,
  ' f ? p = 36648:34:5234984107903:P40_SELECTED_NODE :'|| EmpNo as link
  "Dept". "" EMP ".
  Start by "MGR" is nothing
  connect prior "EMPNO" = "MGR".
  siblings arrested by 'ENAME '.
  }
  and I put the Page selected node element: P40_SELECTED_NODE. the tree worked well and recover the data in tabular form according to the value of tree node
  
  My Question:
  1. I want to recover the data without submitting the page where whenever I select the value of the tree make page reload to update the tabular presentation with the new value, there is a way to convey the value of the tree node to point P40_SELECTED_NODE and in the form of refreshment without page reload.
  
  2-i want when selected in the page tree run process according to the value of the on-set tree node to create dynamic action with (jquery selector: div.tree li > a) but the value of the incorrect node.
  
  Concerning
  Ahmed;

  Take a look at my sample tree application.
  When you select a node, a details report is updated. That should help you implement for your situation.
  However, one thing to note is the link on each node that you have. Click on a node to redirect to the same page and set the value of P40_SELECTED_NODE. You can keep the element, but the link should go, as it's him "reload" the page whenever you click on a node. Implementation of the action of "onselect" tree and setting the page element to the value of the node that will be in place. Be sure to add the page element in the elements present in the form of tables.
  The reason why your selector didn't return the correct value is that you have a click event bound to the anchor tag in each element of the list. The anchor tag does not hold the real value (usually and id), but holds that the display value. The items list item containing the real value in their attribute "id". Therefore, to get this value you should always inspect the first parent of the clicked anchor tag. (which is another way to solve it, of course)

• How to get the selected values of the af:selectManyChoice in the bean support

  Hello
  
  I have a selectManyChoice with a list of static, as shown below.
  At the click of the button, is called a method in the bean support. I want to get the list of the values selected by the method of the bean.
  How to do the same thing.
  

  <af:panelFormLayout id="pfl1" fieldWidth="50%" labelWidth="50%">
          <af:selectManyChoice label="Days" id="smc1"
                               binding="#{Bean.addDaysChoice}">
            <af:selectItem label="Monday" value="MON" id="si17"/>
            <af:selectItem label="Tuesday" value="TUE" id="si13"/>
            <af:selectItem label="Wednesday" value="WED" id="si15"/>
            <af:selectItem label="Thursday" value="THU" id="si14"/>
            <af:selectItem label="Friday" value="FRI" id="si11"/>
            <af:selectItem label="Saturday" value="SAT" id="si16"/>
            <af:selectItem label="Sunday" value="SUN" id="si12"/>
          </af:selectManyChoice>        
            <af:commandButton text="Button"
                              actionListener="#{bean.callSomeMethod}"
                              id="cb1"/>  
  <af:panelFormLayout/>

  Thank you
  Ajay
  
  Published by: Ajay on January 31, 2011 06:26

  Hello

  What about setting the property "value" of the selectManyChoice, and then point to a method of the managed bean (setter/accessor for a variable of type list)?

  Frank

• display multiple values at the completion point

  All,

  IAM create multiple entries for autopopulate point as shown in this jquery plugin link below but iam trying to change that, then values from the query to the table. How can I achieve even using web services apex 4.1.1 but iam trying NOT to use remote url or external file?

  http://jQueryUI.com/AutoComplete/#multiple

  concerning

  All,

  I'm still digging around and looking everywhere but this blog below how I can pass the valueset returned to my jquery as variable below.

  sample:

  http://ORA-00001.blogspot.com/2010/02/ref-cursor-to-JSON.html

  var availableTags is ['data1', 'data2', 'data3'];.

  concerning