Similar Questions

• Smartphones blackBerry for email alerts

  I downloaded some ringtones and alerts to my phone and managed to transfer to the PC. My question is how can I get my phone to play different alerts and ringtones for various applications. I wish that my emails have a different my sms alert, etc.

  Thank you very much

  Click the icon for your profile and scroll down to the tip. Then select the profile you want to edit. You will see then a whole list of things that you can change the alert for. For example, click on "phone". Your first setting is "off the case". This means that you don't have the phone mode "sleep" or in an approved Holster BB. You can change this voice against zero which means no warning at all. Tone would be your choice of ringtone. Vibe and ring would vibrate THEN ring. Vibrate is vibrate. Next option is tune. You can select a preloaded ringtone, or if you want to choose a song that you downloaded browse choose music, and song. Then is volume. Low medium high climbing or none. Then repeat the notification is none or flashing LED. When turned on your status light flashes red for a long time after you have missed a call. This works for other alerts as well. Then there is the number of vibrations before the song starts 1, 2 or 3. But you do not consider that if you do not use vibrate. So you want to change the setting for in case as well. Hope this helps, if not please do not hesitate to ask for clarification.

• Smartphones blackBerry 9700 "Bold" no Audio for Email alerts

  Hello

  Already activated my new Bold 9700 with Bell this morning. Everything works except for the audio alerts by e-mail. I'm very frustrated with it that I have tried several solutions, hopefully a tech here rep can provide a method that I have not already tried.

  When I receive an email, the light, the red asterisk in the main message section, but there is no audio alerts. I have the profile set to normal, sonar ping as audio choice and set to always indoors or out of Holster.  All this started after I tried to sync with contacts from my old phone, a Blackberry 8830 with Bell.

  Here's a little recap, in chronological order.

  -active 9700, voice work of calls, classic phone ring ToneWorks, went to the site of the BIS, set up my two email with Gmail and Yahoo accounts. Received messages and audio alerts by e-mail.

  -the problem started when I synced my old 8830 version 4.5.0.127 with Bishop Office and transferred the address book and contacts of Bishop BB the 9700.

  -Alerts audio email stopped working on gmail and yahoo, still getting emails well. Strange because when the audio alert worked, the red asterisk indicating a new email will appear in the message section and the section of gmail/yahoo messages. With the audio alert does not, the red asterisk appears only in the message section.

  -at this point, the 9700 is running on something v5.0.0.3

  -Sync also failed to transfer phone numbers 8830 address book the 9700. The names and e-mail addresses have been transferred but no phone number.

  -changed profiles by selecting a different audio alert, activated the wireless market, removed the battery for 5 minutes and restarted. Still did not work.

  -wipe the device, set up the email once again, an e-mail alert audo still does not.

  -at this point, I went back to the dealer for help. They used their desktop Manager to synchronize with my 8830. Their timing worked better that phone numbers have been able to transfer through. Once again however, no warning audio email.

  -dealer spent 90 minutes, yes 90 minutes working on my device. He did the same methods I've tried... twice. They wiped my camera... twice. Updated the service books, changed the normal profile to one other than sonar sound alert, still does not.

  -store was closed then dealer suggested to delete the old 8830 BIS email. Don't forget my 8830 and 9700 have different mobile numbers on separate accounts.

  -return home and has decided to do the opposite of the dealer's suggestion, I've deleted email BIS (on the site of the BIS on my PC) on the 9700 rather than the 8830 and recorded again. It worked! Getting email audio alerts on two e-mail accounts! Synchronization Manager to back up, once I do request now if I want to upgrade to v5.0.0.423. I save my profile, and then click ok... bad idea. Once happens, alerts audio email stopped working again.

  -Restore backup data, I just saved, alerts e-mail audiio does not. And then deleted and added a new e-mail, and update of new service books and audio alert in normal profile options.

  -repeats removing the battery, turning network works, no luck.

  From this moment, I have a 9700 with v5.0.0.423, updated service books and two emails from BIS (gmail and yahoo) which are still not give audio alerts email. Is this a problem of software or a defect in my own device? What can I do to fix this? It is imperative for me to answer my emails BIS in time for audio alerts by e-mail are a must for me.

  In addition, my 8830 was conducting a BES until four weeks ago. Now, it is on BIS only even if one of the BES parameters is still present and I couldn't remove it. I don't know the password security feature, 8830 claims always my pw to unlock. Have not been able to turn it off on the security options screen.

  Please help... How to get back my audio alert email?

  Hello Triple_P88,

  To correct this problem, you need to remove the COMPUTER of your BlackBerry smartphone policy.

  To do this, we would need to back up the BlackBerry smartphone. Please open the BlackBerry Desktop Manager and connect your BlackBerry smartphone. Click the backup and restore button, and select Save. Note the location where the backup is saved will allow us to access later to restore the BlackBerry smart phone.

  Once you have saved your BlackBerry smart phone, please follow the link below to remove it from your BlackBerry smartphone strategy

  Link: http://www.blackberry.com/btsc/KB14202

  I advise to do this for both phones, as well as after it is done do not restore the old backup, but selective restore as outlned below.

  Selective restore of your BlackBerry smartphone (only restore the essential elements such as the address book, calendar, messages, etc.). I enclose a link below on how to do it.

  Link: http://www.blackberry.com/btsc/KB1033

  Thank you

• Re: Email alert Notofications

  Hello guys,.

  I am using custom dashboards and I send as an email alerts to the respective teams. To do this, we have @event alert and its configuration. To specify that only certain alerts (those important or essential) should hit the enamel of team members we have now no settings GUI to configure the alert out of dashboards customized just like standard dashboards in notifications. (See attached image)

  For this vmware has created an emailfilter.xml file in the VM Analytics which allows to modify according to your design. My question is where can I fnd this file on a virtual computer analytical if we deployed Ops vC as a paralytic? because vmware has told u cannot use this xml file configuration file editor.

  Vmware notes: see highlited lines

  A filtering rule is a set of conditions and e-mail addresses. The vCenter Operations Manager E-mail plugin uses
  filtering rules to send email notifications to alert appropriate users based on the application, resources
  kind, level alert and other criteria.
  You define filter rules in the emailFilter.xml file, which is located in the vcenterops\
  Directory of user\plugins\outbound\filter_alertplugin\conf.
  If you use the Operations Manager VAPP vCenter, edit the file emailFilter.xml on the second virtual server
  machine.
  VCenter Operations Manager Standalone, you can edit emailFilter.xml directly, or you can use the
  Configuration file editor. This procedure describes how to use the Configuration file editor.
  To the Operations Manager VAPP vCenter, you must modify emailFilter.xml directly. You cannot use the
  Editor configuration file with the Operations Manager vApp vCenter. For a description of the XML elements
  in emailFilter.xml, see "emailFilter.xml leader," on page 82.

  Any help is appreciated

  Thank you

  VK

  Hi, VK,.

  About VM Analytics:

  / usr/lib/VMware-vcops/user/plugins/Outbound/filter_alertplugin/CONF

  Hugo

• How to have the calendar email alerts?

  How can I get calendar send me alerts? I thought I could do it once, but now I can't figure out how. This is for the Air to the Ipad.

  Thank you

  It is not really an email alerts. If you look in the settings, notifications, there are options for the banners and the such of your calendar.

• Is there any way/application control e-mail notification so I receive notifications for emails that meet certain criteria only?

  Turning the email notification is a nightmare, I'll end with so many jump on my watch

  Hello

  When you use iCloud as your e-mail account, you can configure your watch so that you are notified only on e-mails from certain senders. All other e-mails can still be read on your watch, but you will not be notified as they are received.

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > E-mail:
    • Under alerts, type in iCloud > if off view alerts to iCloud > return to the previous screen (tap Mail at the top left of the screen);
    • Under alerts, type on VIPs > turn on display the alerts of VIPs (also activate Haptic and sound).
  • Apple Watch will now offer only alerts for emails from VIP.
  • To add a contact to VIP on your iPhone:
    • In the Mail application: open an email > press on name of the sender (from: xxxx) > tap Add to the VIP, or;
    • In the Mail application, in the view of mailbox: tap the arrow and 'i' icon at the far right of the VIP mailbox > on the next screen, press Add VIP... > choose a contact in Contacts.

• 5.8.1 infrastructure cartridge - create rule for 'availablePagingSpace '?

  I have a number of AIX systems monitored by using the cartridge of the Infrastructure.  I copied and modified the rules for the CPU, the ability to file systems and memory.

  I need to create a rule to alert on 'availablePagingSpace' that appears on the chart "Memory usage" when I click on the "Paging Space" graph via the Host Monitor dashboard.

  I'm assuming that I could copy the rule "Utilziation memory" and likely the condition to test insteead 'availablePagingSpace' of the 'use '.   This seems to be a false assumption.  When you use the rule condition query interface, these are the errors I get.

  com.quest.nitro.service.sl.interfaces.scripting.ScriptingException: com.quest.nitro.service.sl.interfaces.scripting.ScriptMalformedQueryException: bad request: java.lang.IllegalArgumentException: Type ' foglight - 5:Memory:8' doesn't have a property with the name "availablePagingSpace" - start of the script - #availablePagingSpace #.< 100="" ----="" script="" end="">

  I tried to change the rule definition to use different topologies, such as "ICAGENT", but I can't seem to find this property available anywhere.

  I'm still a bit of a newbie to the rule editing Foglight, so bear with me.  If someone has a pointer in the right direction for me on how to access the "availablePagingSpace" metric, so I can use in my terms of rule, I would be very grateful.

  Thank you!

  GWL-

  Hello

  Please try this on a local Foglight Server first.

  When you look at the gauge for swap space available in the dashboard you can see that it is actually taken from the host itself

  

  If the scope of the rule should be the host itself, not memory.

  The easiest way is to seek a similar rule with the host as the scope.

  If you copy the rule run the length of queue for example, you can see that the scope of the rule is host.
  You can then change the rule condition to and when you use the condition Editor, you can see the metric of availablepagingspace as part of the host

  

  I hope this helps...

  Golan

• Email alerts - iDRAC7 - Gmail

  Hi all

  I tried to get the alert e-mail to work with iDRAC7, but my test emails fail immediately.

  In our environment, we have a couple of NAS devices that have the alert e-mail.  I put to use port 587 and I enable TLS.  I also use a Gmail (smtp.gmail.com) as the e-mail server.  It works very well with my NAS devices.

  I would use this same account to gmail for email iDRAC alerts.  I activated Google Alerts and activated authentication.  I guess it will be port 587?

  Someone at - he had to work with a Gmail email alerts?

  I did some research and played a bit with the domain name and the dns name, but I got no chance (in the common parameters).  I have two DNS servers entered in the network settings.  I also tried just to put the ip address of smtp.gmail.com as the e-mail server instead of the name of trying to make DNS of the equation.

  Port 587 is permanently open on our firewall.

  Thank you

  In fact, I found a work around that I wanted to share.

  I have configured an internal SMTP relay server in 2012 from server to transfer emails to the gmail server.

  http://fmuntean.WordPress.com/2008/10/26/how-to-configure-IIS-SMTP-server-to-forward-emails-using-a-Gmail-account/

  In this way, port 25 may be used internally (iDRAC for relay server) and the port 587 TLS can be used to send to Gmail (smtp.gmail.com relay server).

• WAAS Email alert

  Is it possible to set up e-mail alerts for when the central Manager displays an alert.  For example recently one of our devices show that a diet is bad and must be replaced.  I see in the Manager of the central, there is a section for the SMTP server info, but according to the documentation, I think it's only for the notification of the report jobs correct me if I'm wrong. I also know that you can go to each device and configure notifications and provide the SMTP info here as well but I don't know if that will send the right information.  I looked on the device GUI that has the power of bad diet and cannot be found anywhere in the GUI, who says he has a bad power supply. The alert is only appear in the Manager of the central as well as if you SSH to the machine and do a show alerts.

  Any help would be greatly appreciated

  Thanks in advance

  Hi Daniel,.

  Yes. You are right. The paper I sent you is SNMP configuration only. It does not set up alerts by e-mail on WAE.

  You must configure individual WAE for e-mail alerts. It is not yet integrated through the Central Manager. The WAE will send individual email alerts, independent SNMP alerts. I am yet to confirm whether or not you should activate the alert SNMP on WAE to make it work.

  Added: I just checked you must enable and configure the SNMP settings to make this work.

  Kind regards.

• Notification of blackBerry 10 for emails only in the hub of priority

  Dear users,

  Currently, my camera Z10STL100-2/10.2.2.1531 warns me of each email has arrived (displayed on the lock screen and blinking). I would like to receive a notification only for emails in the hub of the priority. Or set a filter on certain emails / shippers are ignored and do not run any notification. How can I set, please? I don't like about other notifications (LI, FB,...).

  See you soon,.

  The only change that you can do is, go to: settings, Notifications, drag upward on the screen to view Contacts, press Contacts, click Customize for the Contact, tap the contact, tap e-mail Messages, Turn Off the alerts you want.

• BlackBerry Smartphones Email alerts

  I just changed from Nextel to AT & T and a to a Blackberry Pearl 8110 Blackberry 7100. I can't find anywhere in the menu to set or remove the e-mail alert tone.  It drives me crazy.  I always want my ringtone for incoming calls, I want just the alert for email to go.  I checked the manual but can't find something there.  Help please.

  From the main screen go to profiles. In the menu that appears, select Advanced, and then click the profile 'active '. From there you can enter the category of Messages and change the settings for Holster/In case None or vibrate

• BlackBerry smartphones turn off email alert? How to do this?

  I just got my phone set up for eMail. Now it drives me crazy because I don't know how to disable the sound alert that says when I send.  Please tell us if you know how to do this.

  Thank you very much.

  If you have just personal (with BIS), you can set up filters to messages on your BIS carrier's Web site.

  If you are on a BES you will have the choice on the device to filter your corporate email (under Messages |) Options | E-mail filters). Personal emails will always be your carrier's Web site.

• R820 email alerts

  Hello

  I noticed that on our R820 this email alert is not enabled by default for all CRITICAL alerts.

  Seems to be a random choice that are activated and conditions that are not.

  • Is there a way to quickly activate alerts all THE REVIEWS to send an email?

  (Test email alerts work OK btw)

  THX,

  John Bradshaw

  What FW iDRAC is installed on the server. You can run racadm commands to activate the alerts by e-mail for all critical alerts below. To do this, you must have iDRAC 1.50.50 FW or higher installed on the server

  racadm eventfilters - c idrac.alert.system.critical - a none set email - n

  racadm eventfilters - c idrac.alert.storage.critical - a none set email - n

  racadm eventfilters - c idrac.alert.audit.critical - a none set email - n

  racadm eventfilters - c idrac.alert.Config.critical - a none set email - n

  Note: For some category you could get an error message indicating "few parameters of alert have failed." This is normal because the E-Mail alert is not supported for all critical alerts.

• Email alerts not working not

  I install hyperic to let know me by email when an alert is generated. I see generated alerts. I don't get the emails. And yes I have Setup notifications of e-mail for the alert that I set up. Is there something that I am missing? My installation is done on the Windows XP computer. I couldn't see a place to enter the ip address of the e-mail server hypericHQ. Please help if you can.

  Check the server.log to see if there are errors on sending emails.
  Two things happens probably here:
  1. the mail server with that HQ is configured does not exist or is
  misconfigured.
  2. the mail server that receives the notification e-mail is rejected
  it because the 'From' email is configured with a domain that is not
  fix.

  Both have fairly easy bugs.  # 1, you can change the e-mail HQ Server
  uses to send alert notifications by editing
  Server-2.7.x/conf/HQ-server.CONF.  # 2 the HQ administrator can
  change the email address used to send notifications to alert on the HQ
  The (Administration-> Configuration of the HQ server) server settings page.

  If none of them are the problem, we will need to see the server.log to
  solve problems more far.

• Force evaluation of the rules for the non-existent entities and unknown attributes...

  Hi all
  
  I have another issue potentially easy for the gurus of the OPA in this forum - there must be a simple explanation to this question but I'm just not see it.
  
  The problem that I am having with several of my rules, it's that the conclusion is not evaluated due to the non-existent entity instances or unknown entity attributes. As an example of the first scenario, I have a rule that checks for the existence of an instance of an entity with a type and status. The conclusion is evaluated as if there is at least an instance of this entity, otherwise, the conclusion remains unknown.
  
  Similarly, I wrote an equation to annualize all its (financial) obligations in a case, where the frequency of the obligation can be weekly, fortnightly, monthly, etc.. I created an attribute for each type of frequency, which are then added to the equation. The issue in this example, is that the equation does not conclude if there is not a value for each attribute in the equation. For example, if:
  
  assign 1 = A + B + C
  
  where A = 1, B = 2 and C is unknown, does not examine the attribute from 1 to 3, but will remain unknown. Logically, I expect that the lack of a digital defaults to 0, and rather unknown attribute value, but this is not the case.
  
  I looked at the 'Certain and known operator rule examples' help topic to try to understand how assign a value to an unknown attribute, but the example at the bottom of the topic page does not provide a sufficient explanation as to how the logic:
  
  point of the total team = team 1 round points + points of the round 2 team + team of turn 3 points
  
  the team of the round 1 points = 0 if
  Round 1 team points (such as recorded by the team) is unknown
  
  the team from round 2 points = 0 if
  etc.
  
  It seems from the example that there are 2 attributes used to the same variable: [team of the Tower, 1 points] and [team of the round 1 points (such as recorded by the team)]. It is not clear to me how the original equation can be concluded if the values are stored in the alternate attribute [points of the round 1 team (such as recorded by the team)] etc.
  
  I have also considered using fragments of rule by the help topic "Prove an attribute using multiple rules", while I could use two equations separated to set the value of an attribute according to the circumstances, that is to say:
  
  assign 1 = A + B + C
  
  1 = 0 if attribute
  attribute 1 is unknown
  
  This attempt results in a logic loop error, probably because I am trying to set the value of an attribute based on the same attribute value.
  
  Any help will be greatly appreciated!
  Philippe

  Hi Philippe,.

  I suggest the following way to solve this problem, although there are other ways too.
  You can use a table of rules for it.

  Open a Working Document, and then press 'Alt + Z' created a rules table.

  Use the following rule: -.
  Keep the text in bold in the left-hand column and the text in italics as a condition for the title in the right column. Use a correct indentation during the compilation of the rules.

  -------------------------------------------
  Attribute 1
  -------------------------------------------
  *0*     any
  A is unknown or

  Uncertain East
  and
  any
  B is unknown or
  B is uncertain
  and
  any
  C is unknown or
  C is uncertain
  ----------------------------------------------
  Has any     
  B is unknown or
  B is uncertain
  and
  any
  C is unknown or
  C is uncertain
  ----------------------------------------------
  A + B C is unknown or     
  C is uncertain
  -----------------------------------------------
  A+B+C in the opposite case     

  Thank you
  Sofiane