Various display size screen problems

Similar Questions

• Dell S2440L will not display size full screen using my HDMI input

  I have a laptop connected via VGA to this monitor and it takes size to display full-screen (ie. the image goes all the way at the edge of the screen).  My desktop PC is connected to the same monitor via a HDMI Monster of good quality cable and my resolution is set to 1920 x 1080 and again the display was about a black 1 inch around edge (ie. the picture is NOT all the way on the screen - there is about an inch all around here it's dark).  When I go to OSD, the Auto setting is gray.  The menu OSD tells me that I'm using "resolution: 1080 p".  I tried to reset the settings of the monitor, but that did not help.

  Because the screen is narrowed down, I don't actually use a native resolution and text rendering is horrible.  In some cases, it is so bad, it is difficult to read some screens.  I need to know how to solve this problem, otherwise the monitor will be back in the store.

  Thank you
  Ray

  I think that there is a problem with my graphics card.  I connected another computer to this monitor via HDMI and the monitor worked fine.

• How a DCR can display a screen that is AUTOMATIC, size the width of the BROWSER?

  How a DCR can display a screen size that is self adjustingto the BROWSER WIDTH?

  

  David - please play with the parameters - and see if you can get it to work as you wish.

  For example, you could turn "width = 1100' to ' width = 100%" and see if you want to lead.

  No = streching maintains the ratio the screen size

• Blue screen problems with Windows 7 64 bit

  It's my first time ever to come here so go easy on me if I have not posted correctly haha.
  Anyway, I came here to see if anyone can help if all goes well shed some light on the issues I'm having. I get these blue screens recently and below I have posted some of the recent issues. To follow and the State for the record that I am aware of a RAM problem that I'm trying to hash it out, but it seems not matter what I always blue screens. I am considering a complete replacement of the RAM, but before you start spending money I don't have I want to get some opinions more. I'll post what I can which may or may not help but any constructive contribution will be GREATLY appreciated.
  
  
  
  
  It's happened today:
  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information about the problem
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960002C66DC
  BCP3: FFFFF8800E988CB0
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Bucket ID: X64_0x3B_win32k + 2566dc
  Information about the server: d597ded6-f553-4a5b-962c-9fef9d479eb8
  It took place on 26/04/13:
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 101

  BCP1: 0000000000000031

  BCP2: 0000000000000000

  BCP3: FFFFF880009E9180

  BCP4: 0000000000000001

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC

  Information about the server: d179de1f-a3f4-4303-8fe7-d91692670210
  This happened on 24/04/13:
  
  
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000041790

  BCP2: FFFFFA800135CB70

  BCP3: 000000000000FFFF

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_0x1a_41790_nt! MiDeleteVirtualAddresses + 40330

  Information about the server: 407de12b-0f29-45e1-a934-e63146fe2f26
  I don't know if this is necessary, but I used my Steam to obtain more detailed information on my system. All that may be necessary let me know.

  Processor information:

  Seller: AuthenticAMD

  Speed: 2511 Mhz

  4 logical processors

  4 physical processors

  HyperThreading: unsupported

  FCMOV: supported

  SSE2: support

  SSE3: support

  SSSE3: unsupported

  SSE4a: support

  SSE41: unsupported

  SSE42: unsupported

  Version of the operating system:

  Windows 7 (64-bit)

  NTFS: support

  Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0

  Video card:

  Driver: NVIDIA GeForce GTS 450

  Name of the DirectX driver: nvd3dum.dll

  Driver version: 9.18.13.1422

  The DirectX driver version: 9.18.13.1422

  Driver date: March 14, 2013

  Desktop color depth: 32 bits per pixel

  Monitor refresh rate: 59 Hz

  DirectX card: NVIDIA GeForce GTS 450

  VendorID: 0x10de

  Device ID: 0xdc4

  Number of monitors: 1

  Number of logical video cards: 1

  No SLI or Crossfire detected

  The main screen resolution: 1680 x 1050

  The desktop resolution: 1680 x 1050

  Main display size: 23,35 "x 14.57" (27,48 "diag)

  59.3 cm x 37.0 cm (69.8 cm diag)

  Main bus: PCI Express x 16

  Main VRAM: 1023 MB

  Supported MSAA modes: 2 x 4 x 8 x

  Sound card:

  Audio: speakers (VIA A high-definition

  Memory:

  RAM: Mb 6143

  Various:

  INTERFACE language: English

  Media type: DVD

  Total disk space: 152586 MB

  More great free block on the hard disk: 26355 Mb

  Humility101

  Sorry just missed your post.  22 of the 35 were directly related to the corruption of memory
  

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• Office display size

  My screen on my screen size is huge.  I can't understand how to change it.  I went to the customization and the DpI is the default 100%. How can I get the job "display size s back to normal?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• PC Tablet tx2000 - display and wireless problems

  Hey people. I have a HP tx2000 tablet PC laptop with a year of purchase warranty - which expired last month, and now two serious and potentially debilitating problems encountered. I spent about four or five hours with the Livechat nice people, who were on the whole patient and temporarily managed to fix one of the questions.

  (1) the wireless device may not be detected - wireless laptop card is not read. It is a big downer for me because I'm using wireless exclusively at home and work and I really want to shell out money for a smart card to replace the technology on a laptop that is 1 year and 1 month. The first thing I tried was re - install Vista. The wireless adapter has been detected and worked just dandy until as soon as I restarted the computer. Then he disappeared from the Device Manager list. I have re-installed twice and it's the same thing. LiveChat directed me to a new BIOS to install, so I installed that, too. It's the same thing. Then Livechat instructed me to delete the program HP Wireless Assistant and bingo! The wireless worked very well and through several reboots. For a day and a half. Now, it is not found yet.

  (2) when the laptop from sleep or hibernation, the display is not 'wake up' again. The fan will be UM, the LED flashes, but display refuses to wake up. The only way to solve this problem is to restart the computer. This also happens / every time / I switch on the computer itself. The display will be activated, no post screen, no beep system seconds later. The only solution is to hold the power slider until the system is a closed hard down, and then click again to turn the computer back on. This usually works, but sometimes it takes 2 or 3 tent.

  The Livechat was to update my video drivers, and they sent me a nice handy nvidia update.  To restart the installation, the computer performed normally, but as soon as I rebooted again (after the conclusion of the session of Livechat marathon at 5 in the morning) the white screen problem has occurred. I also tried to install the latest drivers from the nvidia site (which have been updated from those HP gave me), without result.

  I've read about these two problems on various boards of the internet; Wireless outage seems to be something very common with pavilions and the chipset, even if it is fairly unique in that reinstall allows the system to 'find' immediately and it works very well, and Livechat HP gave me a working solution where the wireless ran for a day and a half and ten or twelve of the low power/ups power. The problem with the monitor, however, seems very widespread and is frustrating in the extreme to me and many others. Much the assumption it implies the tablet technology. My previous laptop was a Dell Inspiron with a large, 2 "hole diameter engraved on the screen, and Support from Dell wouldn't even talk to me even if they had a unique way of extension of the guarantee for what is a major problem of manufacturing. Nevermind, I have below the 3-year warranty, and they would just me shuttle for a salary-service as soon as I gave them my tags. I lost all faith in Dell products accordingly. HP, on the other hand, was very polite by Livechat, and I read some of these forums... It seems that if people know what they are doing here. I don't want to throw more money on another laptop, and the Tablet functions are the bomb. I want just a working laptop.

  See you soon,.

  Hello!

  I got a free replacement of Hewlett-Packard after 30 or two hours and two months of work with HP, as follows:

  (1) contacting a case manager (call HP, o askt be xferred to the records management) and pointing out that:

  (A) my laptop (as well as many others here and elsewhere) suffers from symptoms described in the limited warranty Service extension (http://support.hp.com/us-en/document/c01087277 and HP can agree with that

  (B) the only reason for which it is not covered by the LWSE that the above is that my system is not listed as an attack (it is yours or thousands of others)

  (2) However, 2 months out of warranty case manager first offered a half - off repair (what tech support told me was $428), then again a repair for $90.

  (3) I refused both offers, because it is - of course - a manufacturing defect that affects much more than just a handful of systems. HP is completely ignoring people and hoping it will go away. I got ahold of all the e-mail addresses of single senior partner/CEO/worker I could and started FREE shipping asked to fix my laptop as I MERIT because it is DEFECTIVE.

  (4) Finally, one of the e-mails came to the attention of the Executive customer relations. 15 minutes to speak to a representative, he decides to give me a free repair. All there was to it. The mail box arrived at my door two days later.

  Yes, good luck for the rest of you... I stand testament to the fact that HP gave a free repair to an owner of a machine of series tx, suffering from the failure of GPU Nvidia (missing sporatically wireless are the first and the most common symptom of this). You can get your machine fixed and must never pay for it. Components of a laptop should last more than 13 months! NVIDIA and HP as well acknowledge the failures, but not released any information on what parts have been affected. It is to you, noble drive, to make a pretty big stink to get HP to fix your investment.

  And don't forget... Do not buy HP again!

  See you soon!

  Message edited by Wendy on 21/06/2009 20:48

• IPhone screen problems 5

  I have an iphone 5 with screen problems.  When the phone turns first of all, I can't drag the screen to enter my security code.  The screen is blank.  It will take several times before it stand for a long time, just enter the code.  I also have problems with the original key.  I downloaded the virtual home key, and I'm sure now.  However, when the screen is blank, I use the key home, which does not always, to get it back again.  It's very frustrating.  I'm 1.8 GB for use available, my capacity is 12.5 GB so I don't think that's all. I use the cloud for storage of photos, etc.

  Hello. Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Firefox does not appear in "partial" mode I can't get the display full screen or reduced display, not the intermediate partial screen window.

  The 'partial screen' icon does not work. When it is selected, the screen is reduced to the minimum. (Hover displays the text 'restore down', that doesn't look right.)

  When the screen is reduced to a minimum, I have to hover over the preview, right - select optimize for any screen at all, and it's the display full screen.

  Difficulty? I tried to uninstall/re-install has not fixed the problem.

  Hello rclacher, try this to reset the settings of user interface in firefox: go in firefox > help > troubleshooting information, click on file/show profile folder and close all firefox windows later. a windows Explorer window should open upwards - in there remove the file named localstore.rdf - it will be regenerated the next time you launch the browser.

• Double-click the mouse events to change the display size

  Hello to everyone.

  Thank you very much for reading this post and be able to help.

  I have an image on the screen in front of the Panel.

  I would like that when users double click on it, the display size increases at a specific site for user ca better view.

  How can I do this event?

  Thank you very much.

  Here you can get information about how to create a mouse double click event:
  http://digital.NI.com/public.nsf/allkb/391D522B0FDD4B3F862571E300739F44

• For what display size is optimized Labview 2012?

  Hello

  I have a top of Tower with a high resolution (1920 x 1080). After that I installed Labview2012, on some of the dialogs, e.g. Tools-> Options (see image) not all text is shown completely.

  Also, when I opened VI designed for a lower resolution display I overlap on the labels and controls.

  Can someone tell me if this is due only to the display resolution, or also the Labview? And what display size optimized Labview2012?

  Concerning

  

  Hi, I found the problem. Text size DPI in my Windows display settings has been set to 120 DPI. After, I changed to 96 DPI, text and labels returned to their normal position.

• 2301 x does not display full-screen

  My x 2301 is not display full-screen 1920 x 1080 at 60 Hz on my computer system. graphics card is the Radeon HD5870. Hope someone can help me with this problem. Thank you

  I found the solution for users of cards AMD graphics card. Right-click to open Catalyst Control Center - graphics on the top left corner - computer desktop and displays - there will be an icon of the small screen in the lower-left - click on the black triangle - set up - Scaling Options - slide the bar to 0% overscan - FACT

• TouchSmart IQ506 touch screen problem

  Our company has recently obtained a TouchSmart IQ506 with Windows Vista 64 bit and everything works fine. We did a cool, been reformatting in the network and ran all the updates and others. As you may, or may not, know, the IQ506 isn't a VGA port to install a second monitor or to connect to a projector, so that to use the TouchSmart mirroring an image to the projector, we bought 2.0 of StarTech USB to VGA Display Adapter. I installed the drivers and got work and mirroring the image properly, however, now I'm having a problem with the touch screen.

  The touch screen responds when I touch it, but that the pointer is emptied all the way to the right. Mouse follows my pen up and down with me, but it does not come to the left. It's as if the screen is only read the coordinates there where I touch, and coordinates x are blocked all the way to the right.

  The touchscreen was working perfectly fine until I installed the graphics card driver and software for the VGA display adapter to work. The keyboard and the mouse works fine, everything is perfect except for this touch screen problem. I'm 99% sure it's a software problem, and I wanted to know if there is a known issue, or if anyone else has had this kind of problem. I guess this is the software for the VGA graphics card and I was wondering if this is the case, what I can do for the TouchSmart can support a second screen bypassing screen touch, or any other, problems of alternatives.

  Sorry in advance if there is already a topic on this issue, I went thorugh the forums and can't find anything about it.

  RasterBlaster thanks for your comment.

  I wanted to try something before your steps and I seemed to have solved the problem.

  The problem is that the nvidia card driver was not cooperating with startech to the VGA graphic card driver. I uninstalled the nvidia card driver and all this work and am now able to see on both screens.

  I know I'm going to miss some qualities of video, but from now on, everything works and I think it's what is best. I will try to reinstall the graphics driver, but right now, the problem is resolved. Thank you.

• Windows 7 blue screen problems

  Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
  so time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• reduced after display size.

  Dear friends,

  Display size of my screen on my small laptop (2 inches black bars as the cinema laid to the left and right of the screen) which has happned my baby press certain keys randomly. Please help me get my full screen.

  regarding

  Patrice d

  Hello

  1. Close all open windows.

  2. Right click on the desktop and select Properties.

  3. Click the settings tab in the display properties window.

  4. Under screen resolution, move the slider to adjust the display resolution slider.

     Figure 1: screen resolution slider

     

• Windows 7 - display size too big

  Just replaced XP with Windows 7 on my Dell PC and now the graphica are much too large for the screen. I tried to change the resolution, but it makes it just worse. Did I miss something?

  What resolution your monitor supports? If its a LCD/LED, they generally cite a "native resolution", try setting the PC to that.

  What resolutions have tried? - http://windows.microsoft.com/en-US/windows7/Change-your-screen-resolution

  Go to the website of support for your PC and download that latest support W7 graphics card drivers for your version of windows (32/64 bit) they provide and install them. Reboot and see if they help.

  If this is not the case, check the DPI setting - http://www.sevenforums.com/tutorials/443-dpi-display-size-settings-change.html to ensure that his game initially to 100%, if this helps then make "tweaks" as required.