VC 2.5 and SQL 2005

Similar Questions

• vCenter and SQL 2005 Express on the same physical machine

  I'm new on the VMware environment and am a little concerned about my VMware infrastructure and design.  I have 3 boxes physical accommodation 15 virtual servers.  I have a 4th server that hosts the database SQL and vcenter.  I am wondering what are my chances of having vCenter and SQL 2005 express installed on the same box?  That suggest VMware as best practices concerning this configuration?  If this configuration is ok, what are my options to protect myself in case the box with vCenter and the SQL database dies?  Thank you

  VMware sets a limitation to 5 guests and 50 wen invited you use SQL Express. I run it with 6 guests and 48 guests (incl. models) on the same machine as the server vcenter. That's not what I want to keep and we will change to a standard SQL 2005 on a separate server from SQL (which we had with SQL 2000 and before VI3).

  But I didn't have one problem with this configuration, again.

  With both on the same server may lead to a conflict: SQL 2005 requires IIS but vCenter uses ports. So I installed it but disabled.

  I think also that separating the two tracks faster that have it all on the same box.

  AWo

  VCP / vEXPERT 2009

• Configuration of replication between SQL 200 and SQL 2005

  

  0

  I use two SQL servers

  Server1 = (SQL2000 8.0.2194)

  Server2 = (SQL 2005 9.0.5000)

  Server1 is my editor and Server2 is my Distributor and Subscriber

  For some reason, I managed to create server1 and Server2 server publishing server, but I can't to server2 sonfigure as a Distributor on server1 see error below

  Error 18483: Could not connect to the server XXXX because
  'distributor_admin' is not defined as a remote login on the server

  What could be the cause?

  Thank you very much

  Best regards

  Vusi RAHARISON

  Hey Vusi Radebe,.

  Please reach out to the IT Pro audience in the community support with replication SQL Server TechNet. The link below will take you to the SQL Server instance that focuses on replication issues:
  TechNet - SQL Server - replication

• ESX 3.5 and SQL best practices

  I searched for info on best practices when deploying SQL on the virtual computer. We already have a couple of lightweight SQL production servers running 2008 x 64 and SQL 2005. We are looking for migrating databases existing physical servers to a 2008 newly deployed x 64 SQL VM, I was able to find documents of Vmware and turned to the forum and information. This are not the giant databases - of things such as BES, EPolicy and other mundane but necessary databases. Even more to divide readers to separate newspapers, the sys and databases? Any advice would be appreciated.

  Take a look on:

  Best Practices for SQL Server

  http://www.VMware.com/files/PDF/solutions/sql_server_virtual_bp.PDF

  http://www.VMware.com/files/PDF/SQLServerWorkloads.PDF

  André

• 5.2 CSA and Local SQL 2005

  After reviewing the http://cisco.com/en/US/docs/security/csa/csa52/install_guide/CSA52IG.pdf for the system requirements, I stumbled on the following.

  Hardware configurations:

  1 single Pentium 4 processor (3 Ghz +) with 2 GB of RAM

  2 dual processor Xeon (2.5 Ghz +) with 4 GB of RAM

  Only 1 hardware configuration supports Microsoft SQL Server 2005 Workgroup Edition or Standard Edition with their limit of 4 GB RAM.

  According to the above documentation, can it really be true that Microsoft SQL Server 2005 Workgroup or Standard ed. does not work with the hardware configuration 2?

  Can someone shed some light on why this wouldn't work or check if it works? I had planned on using the hardware configuration 2 with SQL Server 2005, but now I'm unsure if it will work.

  Each configuration will work.

  (1) SQL 2005 Standard does not have the limitation of the RAM, he's going as high as the RAM of the OS.

  (2) limitation of the memory for the Express and the Working Group is that it will not use that much, not that it will not work if you have more (or less for that matter).

  Tom

• vCenter on vOrchestrator on SQL 2005 and SQL 2008?

  I was reading the support for vCenter and vOrchestrator matrix and was surprised to see that vCenter is fully supported on SQL 2008 but vOrchestrator is only supported on SQL 2005. As we all migrate to SQL 2008, we want to install as many vSPhere on SQL 2008 as possible. Is - it possible/decision-making supported to install vSphere on SQL 2008 and then separately install vOrchestrator on SQL 2005? Installing vCenter it seems to me that if both components have been installed at the same time, but maybe it was because I was in a lab environment and went with the built-in SQL Express.

  Any word on what vOrchestrator will support SQL 2008? I really don't like VMware may not have common requirements for all their products. I know that vOrchestorator was an acquisition, but still... come on people! Life is complicated enough.

  vCenter and Orchestrator use their own databases, you can install vCenter on SQL 2008 and Orchestrator 2005 without problem.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• I try to install the update update of security for SQL 2005 service pake 3. I have vista 2 this update applies to my computer I get an error code ff or c0000005

  I try to install the update update of security for SQL 2005 service pake 3.  I have vista 2 this update applies to my computer I get an error code ff or c0000005

  1. navigate to the following registry key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Setup)

  2. find the "Summary" (REG_DWORD), and then change its decimal value from 1 to 0

  3. restart the computer

  4. install the same update.  It should work.

• SQL 2005 update failed. error code 663.

  I didn't know an answer to my previous question, which was:-my computer to stop asking me to update.  I try and it tells me that try to update sql 2005 failed.  error code 663.  This has happened for a long time.  I am a user of the computer only so don't understand not why I need SQL 2005.  Can someone give me a simple answer please.  I run windows XP media center edition version 2002 service pack 3

  You don't need SQL 2005 if you know. You can simply uninstall it from Add and remove programs and uninstalling SQL windows update will not offer you the update and you will not receive an error message, but if you want SQL you have to do is to repair the installation of SQL and the error message will disappear!

• Security update failed for SQL 2005 SP3

  original title: failure of security update

  I keep trying to install an update to security for SQL 2005 Service Pack 3 to windows, but I get the patch installation error message stopped working and its been going on for months, anyone know how to fix it please I need help!

  Try posting in the SQL Server Setup & Upgrade forum for appropriate assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads

• DELETION OF SQL 2005

  I need to remove SQL 2005 on my machine to install a new software product. I followed the recommendation of support for MS to do.

  Now, I try to install the new software on my machine and I get this error >

  Appeal procedure not valid error 5 or argument (C:\Users\David\Desktop\WV-ASM200P_V1.22_English\1 SQL Server2005\English\Component\SQLEXPR. EXE/qb-ADDLOCAL = ALL

  SecuirtyMODE = SQL GTAUTOSTART = 1

  ASCOLLATION = Latin1_General_CS_AS_KS_WS DISABLENETWORKPROTOCOLS = 2

  xp_cmdshell = 1 INSTANCENAME = SQLACCOUNT ASM200 = "NT".

  NT\SYSTEM' SAPWD = tcs5y0na)

  It is a security of the user or a registry problem or what should I do to solve it?

  I suggest that you publish in Microsoft SQL forums on TechNet here:

  http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .

  Thank you.  :)

• SQL 2005 to SQL 2008 R2 update

  Hey everybody,

  I have a MSD (13.0) running on a dedicated Windows 2003 server and has the database hosted on one of our corporate servers running SQL 2005. All the companies getting SQL servers migrate to 2008 R2 at the end of the summer. Has anyone done this type of migration with the MSDS database and what questions or unexpected came?

  Thank you

  Hello Steven

  I'm assuming that you'll upgrade TMS to the latest version as well (13.2%).

  Longer if you follow the procedure documentation and check all the prerequisites and requirement conditions everything should go smooth.

  Please check this link, in particular page 16:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/Install_Guide/Cisco_TMS_install_guide_13-2.PDF

  Also, I highly recommend to install TMSPE that uses the database SQL instead of the OpenDS.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/tmspe/Install_Guide/Cisco_TMSPE_Deployment_Guide_1-0.PDF

  Please note that you must upgrade your VCS so at least 7.1.

  I hope this helps.

  Rafal

• TMS and SQL 2008 R2

  Hi all

  We plan to spend our SQL 2005 a 2008R2 server. In the Installation of TMS and Quick Start Guide (http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/install_guide/Cisco_TMS_Install_Getting_Started_Guide_13-1.pdf , page 6), they say that all versions of SQL 2008 are supported, but we must be sure that this includes the SQL 2008R2. Are there restrictions or considerations?

  Thank you!

  I seem to TMS doesn't run well with SQL 2008 R2 no problem

• CLEANUP_USESSAUD is locked in the MS SQL 2005 database

  Hi team,

  CLEANUP_USESSAUD stored procedure is encrypted in the MS SQL 2005 database bydefault.

  Can I know how to open and edit this procedure?

  http://optillect-SQL-decryptor.software.informer.com/

• vCenter 4.1 on SQL 2005 express upgrade to vc5

  Hello

  Am looking for first upgrade our environment for vsphere 5... first step is to vcenter.  I've read a lot of threads on this topic... but each looks different... Some say to database backup and uninstall it all... others suggest upgrading the database to 2008 r2 first, etc.

  VSphere 5 has been out for several months, this is a generally accepted approach for upgrading to vcenter 4.1 to 5 located on 2005 express?

  My configuration:
  -vcenter installed on 64-bit Windows 2008 R2

  -The 32 bit SQL 2005 express database

  -You are looking at using SQL 2008 R2 express as database

  -Looking at on place upgraded on the same server 64-bit currently in

  All advice appreciated.

  ilyo - I just made this update even 2 weeks ago.  See the process I followed here:

  http://communities.VMware.com/thread/393923

  It will be useful.

  Wally