vCAC apparatus and ID admin console launch java errors
Since the upgrade from 6.0.1 to 6.1 (and oh what a joyful experience that was) I now have following error messages appearing on the vCAC and IDS devices admin pages: -.
vCAC device > Admin: -.
Request (getValues) no valid, action (query) or missing controller(<__main__.) Controller to 0xab95a8 instance >
Device ID > Admin: -.
Request (getValues) no valid, action (query) or missing controller(<__main__.) Controller to 0xab75a8 instance >)
Device ID > SSO > newspapers: -.
Request (logInfo) no valid, action (query) or missing controller(<__main__.) Controller to 0xaa5ab8 instance >)
These errors do not seem critical for its not much but any ideas on how to clear this?
See you soon
Danny
This problem seems to be just a result of browser caching. When the tab services on the vCAC device showed as empty, a cache is restarted and erased cleaned browser error and all services appeared. At the same point on the two error messages disappear just devices.
Danny
Tags: VMware
Similar Questions
-
Cannot access Admin Console Internal Server Error
Hello
I installed the server weblogic 10.3.6 on Red Hat EL 6,7 64-bit, x 64 processor.
Able to access console Em and all the servervicess work fine, but when trying to connect to the administration Console
After entering the user name and the password are page like below
"Server encountered an unexpected condition that prevented him from meeting the demand.
The best thing to do is start to the homepage or try the back button of the browser. »
When I check the logs the error below was given help to solve this problem
# < 4 February 2016 09:19:06 EET > < opinion > < Diagnostics > < fi100idmdev01.ddc.teliasonera.net > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 48eeba3244cb2662:-2ec07938:152a18f47a2: - 8000-0000000000004111 > < 1454570346095 > < BEA-320068 > < Watch "UncheckedException" with severity "Notice" on the server "AdminServer" released February 4 2016 09:19:06 EET. Details of the notification:
WatchRuleType: Journal
WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))
[WatchData: DATE = February 4, 2016 09:19:06 EET SERVER = AdminServer MESSAGE = [path of module: ServletContext@485939269[app:consoleapp console: / console spec-version: 2.5]] Servlet failed with Exception
java.lang.NoSuchMethodError: weblogic.servlet.internal.session.SessionInternal.setAttribute (Ljava/lang/String; Ljava/lang/object; V Z)
to weblogic.servlet.internal.ServletRequestImpl$ SessionHelper.updateSessionId (ServletRequestImpl.java:3048)
at weblogic.servlet.security.internal.SecurityModule.login(SecurityModule.java:308)
at weblogic.servlet.security.internal.FormSecurityModule.processJSecurityCheck(FormSecurityModule.java:300)
at weblogic.servlet.security.internal.FormSecurityModule.checkUserPerm(FormSecurityModule.java:211)
at weblogic.servlet.security.internal.FormSecurityModule.checkAccess(FormSecurityModule.java:94)
at weblogic.servlet.security.internal.ChainedSecurityModule.checkAccess(ChainedSecurityModule.java:79)
at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:82)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2219)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2182)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1485)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Subsystem = HTTP USERID < WLS Kernel > = SEVERITY = error THREAD = ExecuteThread [ASSET]: '2' for the queue: MSGID 'weblogic.kernel.Default (self-adjusting)' = BEA - 101020 MACHINE TXID the CONTEXTID = 48eeba3244cb2662 = fi100idmdev01.ddc.teliasonera.net =:-2ec07938:152a18f47a2:-8000 - 000000000000410f TIMESTAMP = 1454570346094
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
Thank you
Shaik
Finally, I am able to access the console
Thank you guys question solved, but to do a few tests more.
After removing all the patches, I have an error of config.xml file and errors that I started to comment on these tags and it worked
once more thanks for the suggestions and you help fast
Shaik
-
Admin Console - requires that the user Admin password and user name valid
I am running FMIS4.5 on CentOS5.5
FMIS runs and I can connect via Flash Media Encoder.
Displays and Web administration console: 1111 gives the xml output, however
During the use of the user and the password in my xml files to connect (tests with ping), I get the error "user Admin password and valid user name required.
conf/FMS.ini:
###########################################################################
# fms.ini contains alternative to Flash Media Server variables #.
# the configuration files. Lines beginning with ' # ' are considered comments. #
# A variable substitution is in the form < name > = < value >. All the way to #.
# the first '=' is considered the substitution variable name and #.
# everything after the first '=' is considered the substitution value. If #.
# you want a substitution variable to have beginning or trailing spaces.
# include double quotes around the value. For example, foo ="bar" #"
###########################################################################
###############################################################
# This section contains configurable settings in the Server.xml file #.
###############################################################
# Username admin server
# For example:
# SERVER. ADMIN_USERNAME = foo
#
SERVER. ADMIN_USERNAME = Admin
SERVER. $admin_password = str34m1ng
# Port and Flash Media Admin Server IP address must listen to
# For example:
# SERVER. ADMINSERVER_HOSTPORT =: 1111
#
SERVER. ADMINSERVER_HOSTPORT =: 1111
# User Id in which to run the process (Linux only)
# For example:
# SERVER. PROCESS_UID = 500
#
SERVER. PROCESS_UID = 500
# GID in which to run the process (Linux only)
# For example:
# SERVER. PROCESS_GID = 500
#
SERVER. PROCESS_GID = 500
# Key license for Flash Media Server
# For example:
# SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
#
SERVER. LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS #.
# LIVE_DIR is the full path of the sample application 'Live '.
folder # to store any live streams recorded by the server.
# For example:
# LIVE_DIR = \applications\live < FMS_Installation_Dir >
#
LIVE_DIR = / opt/adobe/fms/applications/live
# VOD_COMMON_DIR is the full path to the sample application "VOD".
folder # to the storage on demand and progressive download of fichiers.flv/.mp3.
# File stored in this folder can be listened to and are also available PD.
# Note: If you use the installation default Apache as a Web server.
# If you change VOD_COMMON_DIR and please change the document root
# in the httpd.conf file accordingly.
# For example:
# VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >
#
VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod
# VOD_DIR is the full path to the sample application "VOD".
folder # to store only the fichiers.flv/.mp3 on request. Files stored in
# This file are not PD-able
# For example:
# VOD_DIR = \applications\vod\media < FMS_Installation_Dir >
#
VOD_DIR = / opt/adobe/fms/applications/vod/media
# The maximum size of the FLV cache, in megabytes.
# The default is 500 MB.
#
SERVER. FLVCACHE_MAXSIZE = 500
# To start and stop the server HTTP included throughout
# with FMS.
#
SERVER. HTTPD_ENABLED = true
################################################################
# This section contains configurable settings in Adaptor.xml #.
################################################################
# Application to the virtual host directory
# For example:
# VIRTUAL SERVER. APPSDIR = C:\myapps
#
VHOST. APPSDIR = / opt/adobe/fms/applications
VHOST. ALLOW all =
####################################################################
# This section contains configurable settings Application.xml #.
####################################################################
# List of semicolon delimited paths of research for loading script
# For example:
# APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts
#
APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib
###############################################################
# This section contains configurable settings in Logger.xml #.
###############################################################
RECORDER. LOGDIR =
####################################################################
# This section contains configurable settings in Users.xml #.
####################################################################
# Enable or disable using HTTP requests to run admin commands.
# The value "true" to enable, otherwise it will be disabled. The
actual orders # allowed for the server admin and admin of the virtual host
# users can be defined in Users.xml.
USERS. HTTPCOMMAND_ALLOW = true
Users.XML:
< root >
< UserList >
<!-this tag defines a server administrator. ->
< username = ' ${SERVER.» ADMIN_USERNAME} ">"
<!-salted Hash of the password for the administrator of the virtual server. ->
< password encrypt = "false" >$ {SERVER. $admin_password} < / password >
<!-this administration cannot connect to the server of the-> specified
<!-hosts. This is specified as a comma-delimited list.
<!-host names or domain names and/or (full or partial) IP->
<!-addresses. For example,-->
<!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >
<>allow all < / allow >
<!-this admin is unable to connect to the server from all the...
<!-specified hosts. This is specified as a list by commas->
<!-the name of host or domain names and/or IP (full or partial) - >
<!-addresses. For example,-->
<!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >
< deny > < / nie >
<!-specifies the order in which evaluate < Allow > and ->
<!-< Deny > tags. This can be 'Allow, Deny' or 'Deny, Allow '. The - >
<! - default is 'Deny, Allow', which means that access is allowed - >
<!-unless specified in < Deny > < Allow > and not. ->
< order > allow, deny < / order >
< / user >
< user name "janedoe" = >
< password encrypt = "false" > S4mpl3P4ss < / password >
allow <>< / allow >
< deny > < / nie >
< order > allow, deny < / order >
< / user >
< / UserList >
< AdminServer >
< HTTPCommands >
<!-turn on or off using HTTP requests to run admin commands. ->
<!-set "true" to enable, otherwise it will be disabled. The - >
<! - actual orders allowed for server admin and admin of the virtual host - >
<!-users can be defined in allow it and deny elements. $
< activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >
<!-list orders admin server accessible through HTTP. ->
<!-add several commands separated by commas. 'All' indicates->
<!-all orders (it is not recommended to allow orders). ->
<!-Separate multiple commands with commas. ->
Ping < Allow > < / allow >
<!-list of orders admin server refused access via HTTP. ->
<!-add several commands separated by commas. 'All' indicates->
<!-all orders. ->
< deny > all < / deny >
<!-processing order for refuse and allow command lists. 'Deny, allow' - >
<!--means that the command will be permitted if the order is allow-->
<!-list or not in the deny list. 'Allow, Deny' means the--> command-line
<!-will be allowed if it is in the allow list and not in the - >
<!-list of deny. ->
< order > deny, allow < / order >
< / HTTPCommands >
< / AdminServer >
< / root >
Exit the: admin/1111/ping? auser = Admin & apswd = str34m1ng:
< result >
errorof the < level > < / level >
< code > NetConnection.Connect.Rejected < code >
< description > Admin user requires valid user name and password. < / description >
< timestamp > Thursday, May 17, 2012 11:33:43 AM EDT < / timestamp >
< / result >
Links do not work for localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.
Any help is appreciated!
Hey Jon,
Please take a look at this. Should help.
http://forums.Adobe.com/message/4346847#4346847
Thank you.
-
Can register on EM and Admin Console but not Analytics - down presentation server
I installed 11G on Windows 7 Enterprise. I am able to sign on Enterprise Manager and the Administration Console but not in analytics.
The presentation server is down and there is a message in the nqserver.log about a problem with the oracle.bi.security.service. I pasted the nqserver.log and the sawlog0.log file and the file nqsconfig.ini below.
I checked the BISystemUser into the realms of Weblogic Administration Console/security/myrealm and reset the password.
I also have to reset the password for BISystemUser in Weblogic Enterprise Manager/WebLogic Domain/Security/Credentials/oracle.bi.system
Then restarted services.
I checked to see that there's no lock on DEV_MDS and DEV_BIPLATFORM.
I tried to restart the services on several occasions without any modification.
I don't know what else to check or how to proceed. Is there anything else I should check to identify what I might need to the difficulty of obtaining this race?
Thank you
Dara
c:\OBIEE11G\instances\instance2 > opmnctl status
Process pending: instance2
---------------------------------+--------------------+---------+---------
IAS-component | process type. The NEST | status
---------------------------------+--------------------+---------+---------
essbasestudio1 | EssbaseStudio | 0 | NONE
essbaseserver1 | Essbase | N/A | Down
coreapplication_obiccs1 | OracleBIClusterCo ~ | 3940 | Alive
coreapplication_obisch1 | OracleBIScheduler ~ | 7504. Alive
coreapplication_obijh1 | OracleBIJavaHostC ~ | 7452 | Alive
coreapplication_obips1 | OracleBIPresentat ~ | N/A | Down
coreapplication_obis1 | OracleBIServerCom ~ | 2476 | Alive
nqserver.log
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [36007] loading repository C:\OBIEE11G\instances\instance2\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\SampleAppLite_BI0018.rpd.
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 169 c] domain [14055] loading: SampleApp Lite...
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 169 c] [14056] done to the sector of activity: SampleApp Lite.
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [58002] Query Cache loaded with 0 entries registered the cache files.
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [85003] MDX member name Cache subsystem has been started successfully.
[2013 10-14 T 08: 13:28.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [85004] member recovered MDX entered names Cache subsystem: 0, size: 0 bytes.
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] an error message was received by security BI: oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [13026] error getting BI Security Service roles: "' an error message was received by security BI: oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error '"
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] [46172] store security database is not available, do not re - associate with this type of provider.
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1478] nqsserver: started clustered Oracle BI Server (64-bit). Version: 11.1.1.7.0.
[2013 10-14 T 08: 13:29.000 - 07:00] [OracleBIServerComponent] [NOTIFICATION: 1] [] [] [ecid: 00iHoglZgjCFW7WFLzqIOA0000ag000000] [tid: 1fbc] [43071] a connection with THE Cluster controller - 2083841:9706 was created.
[2013 10-14 T 08: 13:31.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglTjROFW7WFLzqIOA0001qC000000] [tid: f9c] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error
[2013 10-14 T 08: 13:31.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHoglTjROFW7WFLzqIOA0001qC000000] [tid: f9c] [nQSError: 43126] failed authentication: invalid user/password.
[2013 10-14 T 08: 13:39.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmFUwcFW7WFLzqIOA0001Ho000005] [tid: 688] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error
[2013 10-14 T 08: 13:39.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmFUwcFW7WFLzqIOA0001Ho000005] [tid: 688] [nQSError: 43126] failed authentication: invalid user/password.
[2013 10-14 T 08: 13:43.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmAz8aFW7WFLzqIOA0001Ho000000] [tid: 153 c] oracle.bi.security.service.SecurityServiceException: SecurityService: < init > initialization error
[2013 10-14 T 08: 13:43.000 - 07:00] [OracleBIServerComponent] [ERROR: 1] [] [] [ecid: 00iHogmAz8aFW7WFLzqIOA0001Ho000000] [tid: 153 c] [nQSError: 43126] failed authentication: invalid user/password.
sawlog0.log
[2013 10-14 T 07: 51:52.000 - 07:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services (OBIPS) 11.1.1.7.0 (130303.2025 64-bit Build) start. [[
Leader: sawserver.cpp
Online: 455
Geographical area:
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
]]
[2013 10-14 T 07: 51:52.000 - 07:00] [OBIPS] [WARNING: 16] [] [saw.mas.csf] [ecid:] [tid:] store database security is not available, do not re - associate with this type of provider. [[
Leader: csfwrapperimpl.cpp
Online: 152
Geographical area:
Saw.Mas.CSF
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
]]
[2013 10-14 T 07: 51:53.000 - 07:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] security query's timeout is: 120 []
Leader: odbcuserpoploaderimpl.cpp
Line: 1068
Geographical area:
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
]]
[2013 10-14 T 07: 51:56.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.webextensionbase.init.workstationCheck] [ecid:] [tid:] WARNING: The Oracle BI Presentation server Services is running on a machine of class workstation (Windows XP Professional, Windows 7 Professional, etc). The number of concurrent users may be severely limited by the operating system. [[
Leader: webextensionbase.cpp
Online: 492
Geographical area:
saw.webextensionbase.init.workstationCheck
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
]]
[2013 10-14 T 07: 51:56.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.local.checkforcatalogupgrade] [ecid:] [tid:] update is recommended in the latest version of the catalog. [[
Leader: localwebcatalog.cpp
Online: 242
Geographical area:
Saw.Catalog.local.checkforcatalogupgrade
saw.catalog.local.loadCatalog
Saw.Subsystems.catalogbootstrapper.loadcatalog
Saw.webextensionbase.init
Saw.sawserver
Saw.sawserver.initializesawserver
Saw.sawserver
ECID:
NQSConfig.INI
###############################################################################
#
# NQSConfig.INI
#
# Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.
#
# INI file parser rules are:
# If the values are in literals, numbers, or _, they may be
# given as such. If the values contain characters other than
literals #, numbers or _, the values must be in quotes.
#
###############################################################################
###############################################################################
#
# Article repository
#
# Repositories are defined as the name of the logical repository - file name
pairs of #. ODBC drivers use names of logical repository defined in this
# section.
#
# All repositories must reside within the Oracle BI Server instance
Directory of repository #.
#
###############################################################################
[REPOSITORY]
Star = SampleAppLite_BI0018.rpd, default value; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
###############################################################################
#
# Query result Cache Section
#
###############################################################################
[CACHE]
ACTIVATE = YES; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
# A list separated by commas of the < maxSize directory > pairs.
# They are relative to the directory of the process instance.
# e.g. DATA_STORAGE_PATHS = "nQSCache" 500 MB;
# resolves to
# $(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / nQSCache
DATA_STORAGE_PATHS = "cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; # 0 is an unlimited size
MAX_CACHE_ENTRY_SIZE = 20 MB; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
MAX_CACHE_ENTRIES = 1000; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
DISABLE_SUBREQUEST_CACHING = NO;
#Cache the size of the file buffer. Default is 128 KB
CACHE_FILE_BUFFER_SIZE = 128 KB;
# Cluster cache.
# Note that, since it is a network share, the directory should not be
# relative.
GLOBAL_CACHE_STORAGE_PATH = "' 0 MB; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
MAX_GLOBAL_CACHE_ENTRIES = 1000;
CACHE_POLL_SECONDS = 300;
CLUSTER_AWARE_CACHE_LOGGING = NO;
###############################################################################
#
# General section
#
# Contains general settings of the default server location
# and internationalization, temporary space and memory, allocation
# and other default parameters used to determine how data is returned
# from the server to a client.
#
###############################################################################
[GENERAL]
# Localization/internationalization settings.
LOCAL = "English - United States";
SORT_ORDER_LOCALE = "English - United States";
SORT_TYPE = "binary";
# Case must be adjusted with the remote control
target database of the #.
CASE_SENSITIVE_CHARACTER_COMPARISON = ON;
# SQLServer65 sorts NULL values first, while Oracle sorts
# nulls last. This property of ini file must conform to the
# of the remote target database, if there is a
# unique remote database. Otherwise, choose the command
# that corresponds to the database (i.e. the)
# based on the volume of data, frequency of access, sorting
# bandwidth performance).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh ';
DATE_DISPLAY_FORMAT = "yyyy/mm/dd";
TIME_DISPLAY_FORMAT = "hh."
# Allocation of temporary space, memory and resources
# parameters.
# You can use KB, MB for memory size.
# Working directory paths can be left empty and default
# for the temp of the process instance directory. For example,.
# $(ORACLE_INSTANCE) / temp/OracleBIServerComponent / < InstanceName >.
# If it is relative, it will be compared to this path. So absolute.
# We take the absolute path when running.
WORK_DIRECTORY_PATHS = "";
VIRTUAL_TABLE_PAGE_SIZE = 128 KB;
# Analytics Server returns all month names and day three
abbreviations # (for example, "Jan", "Feb", "Sat", "Sun").
# To use full names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
USE_UPPERCASE_MONTH_NAMES = NO;
USE_UPPERCASE_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO; # default is none
###############################################################################
#
# Security section
#
# The legal value for DEFAULT_PRIVILEGES are:
# NO READ
#
###############################################################################
[SECURITY]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL = YES; # default is none
# Note that the below paths must be relative to the instance
directories of config # if specified. for example,.
# $(ORACLE_INSTANCE) / config/OracleBIServerComponent / < InstanceName >
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; default value is none.
SSL = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_CERTIFICATE_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\server-cert.PEM '; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_PRIVATE_KEY_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\server-key.PEM '; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_VERIFY_SERVERS = YES; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_VERIFY_CLIENTS = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_CA_CERTIFICATE_FILE="C:\OBIEE11G\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\biinstances\coreapplication\ssl\combinedcacert.PEM '; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SSL_TRUSTED_PEER_DNS ="";
SSL_CERT_VERIFICATION_DEPTH = 9;
SSL_CIPHER_LIST ="";
###############################################################################
#
# Server section
#
###############################################################################
[SERVER]
READ_ONLY_MODE = NO; # It is both online and offline - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
MAX_SESSION_LIMIT = 2000;
MAX_REQUEST_PER_SESSION_LIMIT = 5000;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),
HTTP_CLIENT_THREAD_RANGE = 0-100;
HTTP_CLIENT_THREAD_STACK_SIZE = 0; # default is 256 KB (32-BIT mode), default of 0 for 1 MB (64-bit),
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; # default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; # default is 1024
MAX_QUERY_PLAN_CACHE_ENTRY_SIZE = 0; # default is 256 KB, (in 32-BIT mode), 1 MB (64-bit), the default value to 0
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; # default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; # default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; # default is 20
CLIENT_MGMT_THREADS_MAX = 5; # default is 5
# This specifies the port number and IP that the server will be
# listen to. When it is set to 0.0.0.0, the server listens on all IPs
# address on the machine, otherwise the server will bind to the
# specified ip address.
RPC_SERVICE_OR_PORT = "9703; # default is 0.0.0.0:9703 - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
LISTEN_ADDRESS = "0.0.0.0"; # default is 0.0.0.0
LISTEN_PORT = 9703; # default is 9703
ENABLE_DB_HINTS = YES; # default is Yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = YES; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
# Suite required if CLUSTER_PARTICIPANT = YES
# The directory of publication must be a full path as it should
# a shared drive.
REQUIRE_PUBLISHING_DIRECTORY = NO; # Do not join the cluster if the directory is not accessible - Configuration of this setting is managed by Oracle Enterprise Manager Fusion Middleware control
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
VARIABLE_VALUE_LIMIT = 4096;
# EVALUATE_SUPPORT_LEVEL:
# 1: evaluate is supported for users with the permission of manageRepositories
# 2: evaluate is supported for all users.
# other: assess only is not supported if the value is something else.
EVALUATE_SUPPORT_LEVEL = 0;
FMW_SECURITY_SERVICE_URL = " " http://131.216.37.7:7001 "; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
FMW_SECURITY_SERVICE_MAX_NUMBER_OF_CONNECTIONS = 2000;
FMW_SECURITY_SERVICE_MAX_NUMBER_OF_RETRIES = 0;
# FMW_SECURITY_SERVICE_RETRY_EXCEPTION_SUBSTRING = "closed by force."
FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = NO;
# ENABLE_NUMERIC_DATA_TYPE:
# When this setting is enabled, the Administration tool will be
# import, data type Oracle/TimesTen number as the type of digital data in physics
column definition #. Oracle BI Server will interpret the Oracle Number data
# type in the form of digital data internally during its execution.
ENABLE_NUMERIC_DATA_TYPE = NO;
MONITOR_PORT = "9701; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
ORACLEHARDWAREACCELERATION = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
###############################################################################
#
Article # high availability
#
###############################################################################
[HIGH_AVAILABILITY]
HA_DB_PING_PERIOD_MILLISECS = 60000;
###############################################################################
#
# Dynamic library section
#
# Dynamic libraries specified in this section
# are classified by the CLI, they take over.
#
###############################################################################
[DB_DYNAMIC_LIBRARY]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
Oci8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
BAPI = nqsdbgatewaysapbapi;
ESSBASE = nqsdbgatewayessbasecapi;
OracleADF = nqsdbgatewayoracleadf;
OracleADF_HTTP = nqsdbgatewayoracleadf;
OracleCEP_HTTP = nqsdbgatewayoraclecep;
HyperionADM = nqsdbgatewayadm;
OracleWS = nqsdbgatewayoraclews;
Hadoop = nqsdbgatewayhadoop;
TimesTen = nqsdbgatewaytimesten;
timesten35 = nqsdbgatewaytimesten35;
###############################################################################
#
# Section monitoring of use
#
# Collect usage on each logical query statistics submitted to the
# Server.
#
###############################################################################
[USAGE_TRACKING]
ACTIVATE = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
#==============================================================================
# Parameters used to write the data to a flat file (e.g., DIRECT_INSERT = NO).
#
# Note that the directory must be relative to the directory of the instance.
# In general, we prefer directo insert flat files. If you work in
# a cluster, it is recommended that you use direct insertion. If there is
a single instance Oracle BI Server #, then you can use data from flat files.
# The directory is assumed from the process instance. For
example #, "UTData" is resolved to
# "$(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / UTData.
STORAGE_DIRECTORY = 'path to the <>directory ";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = 'ANSI '; # ANSI, UTF8, 1252, etc..
#
#==============================================================================
DIRECT_INSERT = YES; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
#==============================================================================
# Parameters to insert data in a table (for example DIRECT_INSERT = YES).
#
PHYSICAL_TABLE_NAME = "<>database". "' Catalogue of <>. "" schema of <>. "< table > '; # Or "<>database". "" schema of <>. "" < table > "; -This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
CONNECTION_POOL = "<>database". "<>Connection pool '; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
BUFFER_SIZE = 250 MB;
BUFFER_TIME_LIMIT_SECONDS = 5;
NUM_INSERT_THREADS = 5;
MAX_INSERTS_PER_TRANSACTION = 1;
#
#==============================================================================
SUMMARY_STATISTICS_LOGGING = NO; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
SUMMARY_ADVISOR_TABLE_NAME = "<>database". "' Catalogue of <>. "" schema of <>. "< table > '; # Or "<>database". "" schema of <>. "" < table > "; -This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
###############################################################################
#
# Query optimization flags
#
###############################################################################
[OPTIMIZATION_FLAGS]
STRONG_DATETIME_TYPE_CHECKING = ON;
###############################################################################
#
# MDX member name Section Cache
#
# Subsystem of cache for the mapping between the unique name and the legend of
number of members of all SAP/BW cubes in the repository.
#
###############################################################################
[MDX_MEMBER_CACHE]
# The entry to indicate that if the feature is enabled or not, by default, NO because it applies only to the SAP/BW cubes
ACTIVATE = YES;
# The path to the location where the cache is persisted, applies to one place.
# the number at the end indicates the storage capacity. When the feature is activated,
# administrator must replace the "< directory path >" with a valid path.
# This cache will be relative to the directory of the process instance data. For
example: #
# DATA_STORAGE_PATH = "MDXCache" 500 MB;
# resolves to:
# $(ORACLE_INSTANCE) / bifoundation/OracleBIServerComponent / < instance_name > / MDXCache
DATA_STORAGE_PATH is "MDXCache" 500 MB.;
# Space maximum allowed for each user.
MAX_SIZE_PER_USER = 100 MB;
# Number of members in a level can be kept on the disk
MAX_MEMBER_PER_LEVEL = 1000;
# Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB;
###############################################################################
#
# Section aggregation persistence
#
###############################################################################
[AGGREGATE_PERSISTENCE]
# Persistence default aggregation
# The prefix must be between 1 and 8 characters
# and should not have special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_;
AGGREGATE_THREAD_POOL_SIZE = 5;
AGGREGATE_AW_NAME = "OBI_AW";
PREAGGREGATE_AW_CUBE = YES;
###############################################################################
#
# Section Javahost
#
###############################################################################
[JAVAHOST]
JAVAHOST_HOSTNAME_OR_IP_ADDRESSES = "AI - 2083841:9810"; # This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control
#JAVAHOST_HOSTNAME_OR_IP_ADDRESSES = '< machine-name1 >': < port_number1 >, < machine-name2 >: < port_number2 >;
###############################################################################
#
# Section Datamart Automation
#
###############################################################################
[DATAMART_AUTOMATION]
' ESSBASE_STUDIO_URL = ' http://localhost:9080/dma/dmaservlet ";
ESSBASE_SERVER = "localhost";
DMA_DATABASE = "DMA_DB";
Intresting...
I recommend you go through the below article
Rittman Mead Consulting & raquo; Blog Archive & raquo; OBIEE / FMW and networking on the DHCP hosts
Thank you
Angelique
-
Hi all
How can we extract the list of the current source session and Desktop Manager console or view VDI server. I did it via the administration console VDI himself (just copied VDI console URL and passed to the Excel file), but it poses problem in the conf file and generates the error and change the refresh value o-1 (for this reason our VDI console was not showing the list of users in the means of the pool when we clicked on any pool he went into the suspended state) I fought for this problem since a week and after a lot of research on the VMware site, I found the error and the solution but I solved the problem, but now I again reqiured a list of computers disconnected and connected and ready.
The thing is that I need to know
How many users is connected or disconnected?
How many office are ready assined to a bot user does not use them?
I have the plan hurt get the list and stops the virtual machines that are in ready state, then it will improve the performance of the VDI cluster.
Is there any problem so ill stop the virtual machines that are in the ready state.
Thanks in advance!
Pradeep K Yadav [email protected] administrator VMware & VDI
Why do you the work by yourself?
Use the Provisionigs parameter to stop the unused VMs in order of time / disconnect or logoff.
-
Based on Windows Vista unable to launch Java application
Windows Vista unable to launch Java based application for example Samsung phone mobile file management software Kies, iPhone iTunes and trading stations.
I had uninstalled all the old version of Java and downloaded the java last official website of Java and tried to reinstalled several times. Java can be installed successfully but the Java application or Java-based software may not be launched or opened.
Also, for one of the web based Java software (for example the stock/mapping platform forex at ProRealTime.com), when I hover my mouse over the bar (lower right next to the time bar), tasks the Java icon just disappears.
I searched high and low for a solution for more than a year now and nothing works.
I think it's the fault of Windows OS and not the Java or Java applications. I had checked that my Java has been installed correctly this way. But Java-based software would be launched just don't!
Some experts from Microsoft can you please help?
Can I re - install Windows Vista without re - format the hard drive of my computer?
Please help.
Hello Yap Kok Heng,
Have you tried to find a solution to your question on the forums located here Oracle Java? -
Cannot install java - java console not working-error 1714 during installation
My java Control Panel and the java console in IE10 do not work. When I try to install ANY version of JAVA I get the error: "ERROR 1714. The old version of JAVA 7 update 21 cannot be deleted. Consult your technical support group. "I already had and it worked. I don't know how he took. I searched the system and can't find any reference to JAVA. I cleaned the registry and deleted all references to JAVA, JRE, JAVA and VM machine. I got the console to be recognized in Firefox, but cannot get it to IE 10. I desperately need this problem and soon. Can someone tell me what is the problem and how to fix it? If so, thanks in advance.
Hi Dave,.
I suggest you try the steps from the following link:
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651Post us the update on the State of the question
-
Admin Console requires a reboot in order to identify yourself again
Hello
We run the WLS 11 g (10.3.6.0) on an Oracle Linux server. After running the administrator of the server for several days, the admin console app would deny the login and then you need to restart the management server and it works again. No one has changed the password. All the world has noticed this behavior? What can be done to solve this problem without having to restart the Management Server?
Thank you
Zemian
Hello
The reason which not able to connect to the console after a few days can be possible to lock the user some may have used the wrong password for the largest number of times.
You can change the settings so that it accepts more number of invalid attempts, buy by default that it accepts only 5 invalid attempts and then block the account for 30 minutes.
You can navigate to security realms ==> locking the user ===> and change the threshold of locking a higher value and you won't face the question until what someone types the incorrect password for this particular moments.
Change the configuration and verify the behavior.
It may be useful
-
Reset the Admin Console Admin password.
Hi people.
One of these questions...
I have vCOPs trial (Version 5.7.2, Build 1314472).
It has been installed, and now I want to introduce some statements of SMTP, so I need to access the Administration console, but I forgot the password.
> I have 'root' access to two virtual machines in the paralytic.
> I can access the console of the "admin" user interface
> I can't just access the GPMC as "admin".
For the life of me I don't know a way to change the password of admin for this particular console.
Can I change the admin console UI using the resetadminpwd.sh command, but it doesn't seem to change the other console.
I try to change the admin user by using the command passwd admin , but this does not seem to apply either.
Can someone please advise?
Thank you!
Yes, no joy.
However, I've now solved:
Passwords admin on the Analytics box and the user interface of the box where not the same thing.
I've now changed them, so they are both the same, and it's to let me.
The base admin passwd command on the correct box does the work.
Thanks for trying to help me!
-
Problem of Thinapp 2012 Sccm Admin Console
Hello
I am of Thinapp 2012 SCCM Admin Console.
It works fine, except when I try using the remote control (device, Start, Remote Desktop)
It then starts a couple of mstc.exe and the CPU will Tigertailz.
My procedure is:
Windows XP VM ThinApp vanilla
Start company ThinApp
Install .net Framework
Install Sccm (adminconsole.exe)
In the entry points that I select:
Configuration Console Manager
mstsc
PresentationHost
RemoteControlViewer
TSWBProxy
wksprt
I'm doing an .msi with a DAT.
Any ideas?
I didn't know the 2012 SCCM admin console, but I made some snap-ins mmc try changing your package.ini (assuming that sccm uses mmc) by the following.
[Config Manager Console.exe]
Source=%SystemSystem%\MMC. EXE
CommandLine=%SystemSystem%\MMC. EXE 32 "Path\To\File.msc".
I hope this helps.
-
Could not keep the portal admin console repository connections.
Hello
I created the additional WLP (flow in function) repository in oracle.
and configured as a data source in the server console. and added respective JNDI name in the portal administration console.
and I could add/remove content. But whenever I'm restart the machine I'm losing the additional connection of the console to the configuration Portal admin console only.the connection server is safe.
whenever I have to configure with same name JNDI add working with it in the portal administration console only, whenever I restart the machine.
The content and data sources configuration is secure.
but whenever I create additional repository WLP, I couldn't see the respective details have updated content - mgmt.xml in the meta-inf EAR.
is that because of this. If so why is getting updated when it adds new connection in the administration console.When you create a connection of repository running with the administrator of the portal, the configuration is written to a Deployment Plan. By default, the deployment Plan is written in a location which can be removed during a redeployment of the application. You can specify a location for the deployment plan, that will not get deleted through the WebLogic Server Console or you can add the information to the/meta-inf content - config.xml in
. http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/prodOps/deployment.html#wp1045617
Brad
-
WebLogic portal 10.3.2 sample domain admin console question
I use the domain example bundled with WebLogic Portal 10.3.2 for some tests. I'm trying to access the admin console, can someone tell me how to find the username and password to access the console? I thought that weblogic/eu1 was the default.
Thank youThe password for the user of weblogic in the WLP 10.3.2 domain example is "webl0gic" (note the use of zero the password).
Brad
-
How to find and remove old versions of Java on Mac OS.
How can I find and remove old versions of Java on MAC Os?
Via the Terminal check this https://www.java.com/en/download/help/mac_uninstall_java.xml
-
I play runescape and lately to get java error on my desktop icons very much, they are labeled hs_err_pid followed 3 different numbers, help please
Hi madsman,
Thank you for using Microsoft Windows forum
For better support please give us the exact error code.
This could well be a virus problem. If your step would be to run a full scan of PC online using the following link:
http://OneCare.live.com/site/en-us/Center/whatsnew.htm
Then, go to your Control Panel and open "Programs and features" and tell us what version of the Java Application you have.If you have a Version that is older, then you must remove the older version of "Programs and features" and install the latest version by visiting here: http://www.java.com/en/download/manual.jsp
It is normally acceptable to load new versions of Java on top of older versions, but in this case we want to start over with a latest full version.
Scroll down a bit to the "Download Windows Section" and download/install "Windows 7".
After download/install this newer version. Close all windows and applications that may be running and "restart" your computer.
Then click the link once more to return to the download page and select the link that reads "Check Java has been installed properly" If the application downloaded/installed correctly then this test will let know you that Java is working properly.
Your last step would be to run a malware scan using this link:
Malicious software removal tool: http://www.microsoft.com/security/malwareremove/default.aspx
Kind regards
Aziz Nadeem - Microsoft Support -
I try to open Microsoft Outlook 207 - get repeatedly: C:\Documents and Settings\Admin\My Documents\Personal folders (2) .pst could not be found
Fix your broken Outlook personal folders (PST) file
http://www.howtogeek.com/HOWTO/Microsoft-Office/fix-your-broken-Outlook-personal-folders-pst-file/
I hope I could help
Maybe you are looking for
-
HP 2000: Double monitor and identify as #1 and 2
I have a HP 2000, it has a HDMI, VGA and 3 USB ports (1 is already in use). My graphics card is a radeon HD 8400 AMD / R3 series. My question is can I connect a second monitor and use my laptop screen as a principal with the external display as a se
-
for some reason my system restore stopped working, can't download new updates.tried now says restore (0 x 81000202) left me speechless?
-
the award application code 6700
On hpconnected.com, I am trying to record my printer and ask them to the enterclaim code. However when I use Info Print, the print is my code printer (the original tape of the e-mail assigned to the printer address). When I enter this code, I get the
-
BlackBerry Smartphones Can I get directions?
GPS on my Curve 8330 can feel alternately like a conventional GPS? For example, can he tell me to turn right into 100 feet that I turn to the next round? Or did he just give me a list of directions as mapquest. I thought that maybe because it's a
-
Pantalla locked al iniciar el equipo. VAIO con S.O. Windows 8
«"Pantalla al arrancar is presenta con"preparing reparacion automatica"- diagnosticando - intentando realize reparaciones" y finalmente una nueva pantalla donde is muestra "reparación automatica no pudo reparar el equipo" Precisa "Advanced options" r