Admin Console requires a reboot in order to identify yourself again

Similar Questions

• Admin Console - requires that the user Admin password and user name valid

  I am running FMIS4.5 on CentOS5.5

  FMIS runs and I can connect via Flash Media Encoder.

  Displays and Web administration console: 1111 gives the xml output, however

  During the use of the user and the password in my xml files to connect (tests with ping), I get the error "user Admin password and valid user name required.

  conf/FMS.ini:

  ###########################################################################

  # fms.ini contains alternative to Flash Media Server variables #.

  # the configuration files. Lines beginning with ' # ' are considered comments.  #

  # A variable substitution is in the form < name > = < value >. All the way to #.

  # the first '=' is considered the substitution variable name and #.

  # everything after the first '=' is considered the substitution value. If #.

  # you want a substitution variable to have beginning or trailing spaces.

  # include double quotes around the value. For example, foo ="bar" #"

  ###########################################################################

  ###############################################################

  # This section contains configurable settings in the Server.xml file #.

  ###############################################################

  # Username admin server

  # For example:

  # SERVER. ADMIN_USERNAME = foo

  #

  SERVER. ADMIN_USERNAME = Admin

  SERVER. $admin_password = str34m1ng

  # Port and Flash Media Admin Server IP address must listen to

  # For example:

  # SERVER. ADMINSERVER_HOSTPORT =: 1111

  #

  SERVER. ADMINSERVER_HOSTPORT =: 1111

  # User Id in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_UID = 500

  #

  SERVER. PROCESS_UID = 500

  # GID in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_GID = 500

  #

  SERVER. PROCESS_GID = 500

  # Key license for Flash Media Server

  # For example:

  # SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX

  #

  SERVER. LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS #.

  # LIVE_DIR is the full path of the sample application 'Live '.

  folder # to store any live streams recorded by the server.

  # For example:

  # LIVE_DIR = \applications\live < FMS_Installation_Dir >

  #

  LIVE_DIR = / opt/adobe/fms/applications/live

  # VOD_COMMON_DIR is the full path to the sample application "VOD".

  folder # to the storage on demand and progressive download of fichiers.flv/.mp3.

  # File stored in this folder can be listened to and are also available PD.

  # Note: If you use the installation default Apache as a Web server.

  # If you change VOD_COMMON_DIR and please change the document root

  # in the httpd.conf file accordingly.

  # For example:

  # VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >

  #

  VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod

  # VOD_DIR is the full path to the sample application "VOD".

  folder # to store only the fichiers.flv/.mp3 on request. Files stored in

  # This file are not PD-able

  # For example:

  # VOD_DIR = \applications\vod\media < FMS_Installation_Dir >

  #

  VOD_DIR = / opt/adobe/fms/applications/vod/media

  # The maximum size of the FLV cache, in megabytes.

  # The default is 500 MB.

  #

  SERVER. FLVCACHE_MAXSIZE = 500

  # To start and stop the server HTTP included throughout

  # with FMS.

  #

  SERVER. HTTPD_ENABLED = true

  ################################################################

  # This section contains configurable settings in Adaptor.xml #.

  ################################################################

  # Application to the virtual host directory

  # For example:

  # VIRTUAL SERVER. APPSDIR = C:\myapps

  #

  VHOST. APPSDIR = / opt/adobe/fms/applications

  VHOST. ALLOW all =

  ####################################################################

  # This section contains configurable settings Application.xml #.

  ####################################################################

  # List of semicolon delimited paths of research for loading script

  # For example:

  # APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts

  #

  APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib

  ###############################################################

  # This section contains configurable settings in Logger.xml #.

  ###############################################################

  RECORDER. LOGDIR =

  ####################################################################

  # This section contains configurable settings in Users.xml #.

  ####################################################################

  # Enable or disable using HTTP requests to run admin commands.

  # The value "true" to enable, otherwise it will be disabled.  The

  actual orders # allowed for the server admin and admin of the virtual host

  # users can be defined in Users.xml.

  USERS. HTTPCOMMAND_ALLOW = true

  Users.XML:

  < root >

  < UserList >

  <!-this tag defines a server administrator. ->

  < username = ' ${SERVER.» ADMIN_USERNAME} ">"

  <!-salted Hash of the password for the administrator of the virtual server. ->

  < password encrypt = "false" >$ {SERVER. $admin_password} < / password >

  <!-this administration cannot connect to the server of the-> specified

  <!-hosts. This is specified as a comma-delimited list.

  <!-host names or domain names and/or (full or partial) IP->

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  <>allow all < / allow >

  <!-this admin is unable to connect to the server from all the...

  <!-specified hosts. This is specified as a list by commas->

  <!-the name of host or domain names and/or IP (full or partial) - >

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  < deny > < / nie >

  <!-specifies the order in which evaluate < Allow > and ->

  <!-< Deny > tags. This can be 'Allow, Deny' or 'Deny, Allow '. The - >

  <! - default is 'Deny, Allow', which means that access is allowed - >

  <!-unless specified in < Deny > < Allow > and not.     ->

  < order > allow, deny < / order >

  < / user >

  < user name "janedoe" = >

  < password encrypt = "false" > S4mpl3P4ss < / password >

  allow <>< / allow >

  < deny > < / nie >

  < order > allow, deny < / order >

  < / user >

  < / UserList >

  < AdminServer >

  < HTTPCommands >

  <!-turn on or off using HTTP requests to run admin commands.     ->

  <!-set "true" to enable, otherwise it will be disabled.  The - >

  <! - actual orders allowed for server admin and admin of the virtual host - >

  <!-users can be defined in allow it and deny elements.                                   $

  < activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >

  <!-list orders admin server accessible through HTTP.         ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders (it is not recommended to allow orders).          ->

  <!-Separate multiple commands with commas.                              ->

  Ping < Allow > < / allow >

  <!-list of orders admin server refused access via HTTP.                ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders.                                                       ->

  < deny > all < / deny >

  <!-processing order for refuse and allow command lists.  'Deny, allow' - >

  <!--means that the command will be permitted if the order is allow-->

  <!-list or not in the deny list.   'Allow, Deny' means the--> command-line

  <!-will be allowed if it is in the allow list and not in the - >

  <!-list of deny.                                                           ->

  < order > deny, allow < / order >

  < / HTTPCommands >

  < / AdminServer >

  < / root >

  Exit the: admin/1111/ping? auser = Admin & apswd = str34m1ng:

  < result >

  errorof the < level > < / level >

  < code > NetConnection.Connect.Rejected < code >

  < description > Admin user requires valid user name and password. < / description >

  < timestamp > Thursday, May 17, 2012 11:33:43 AM EDT < / timestamp >

  < / result >

  Links do not work for localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.

  Any help is appreciated!

  Hey Jon,

  Please take a look at this. Should help.

  http://forums.Adobe.com/message/4346847#4346847

  Thank you.

• After installing itunes on a windows 10, it opens and the game once, then requires a reboot every time

  After you have installed itunes on a new computer windows 10, it will open and play only once, and then requires a restart of the computer before opening again.  Then it will open and play only once, requiring a reboot again

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Can you please send me the serial number, you have a private message ?

• Reset the Admin Console Admin password.

  Hi people.

  One of these questions...

  I have vCOPs trial (Version 5.7.2, Build 1314472).

  It has been installed, and now I want to introduce some statements of SMTP, so I need to access the Administration console, but I forgot the password.

  > I have 'root' access to two virtual machines in the paralytic.

  > I can access the console of the "admin" user interface

  > I can't just access the GPMC as "admin".

  For the life of me I don't know a way to change the password of admin for this particular console.

  Can I change the admin console UI using the resetadminpwd.sh command, but it doesn't seem to change the other console.

  I try to change the admin user by using the command passwd admin , but this does not seem to apply either.

  Can someone please advise?

  Thank you!

  Yes, no joy.

  However, I've now solved:

  Passwords admin on the Analytics box and the user interface of the box where not the same thing.

  I've now changed them, so they are both the same, and it's to let me.

  The base admin passwd command on the correct box does the work.

  Thanks for trying to help me!

• Problem of Thinapp 2012 Sccm Admin Console

  Hello

  I am of Thinapp 2012 SCCM Admin Console.

  It works fine, except when I try using the remote control (device, Start, Remote Desktop)

  It then starts a couple of mstc.exe and the CPU will Tigertailz.

  My procedure is:

  Windows XP VM ThinApp vanilla

  Start company ThinApp

  Install .net Framework

  Install Sccm (adminconsole.exe)

  In the entry points that I select:

  Configuration Console Manager

  mstsc

  PresentationHost

  RemoteControlViewer

  TSWBProxy

  wksprt

  I'm doing an .msi with a DAT.

  Any ideas?

  I didn't know the 2012 SCCM admin console, but I made some snap-ins mmc try changing your package.ini (assuming that sccm uses mmc) by the following.

  [Config Manager Console.exe]

  Source=%SystemSystem%\MMC. EXE

  CommandLine=%SystemSystem%\MMC. EXE 32 "Path\To\File.msc".

  I hope this helps.

• I want to reinstall our Adobe Acrobat Pro XI because we started to get the error messages. I followed the original instructions, but when I logged in I couldn't find 'My orders' page that is required to install my order.  Any ideas?

  I want to reinstall our Adobe Acrobat Pro XI because we started to get the error messages. I followed the original instructions, but when I logged in I couldn't find 'My orders' page that is required to install my order.  Any ideas?

  Barbara,

  If you are looking for your serial number, sign in to your account Adobe. On the page for managing accounts that appears, all of your registered products and their serial numbers are listed in the section Plans & products. For more information about the location of the serial numbers, please see find a serial number

  Here is the link to download and install the software:

  Acrobat X, XI

  Guinot

• Prime Minister 12 gel elements and requires a reboot

  I have version 12 elements of the first frost and requiring a reboot.  Is what someone else has this problem and is at - there a way to fix.  Victory of 8.1 64-bit, Intel i7, 16 GB of RAM and two SSDS.  plenty of room and power should not too many questions, I think.

  Muzzer

  I have the first 12 on Windows 8.1 items 64 bits with less resources of the computer that you and am not have freezing problems or collisions using the program. The computer environment does not all SSD.

  What I ran into (Windows 7, 64-bit 8 or 8.1) has been extremely slow opening time of file Menu/New/Project and extremely slow time of closing for the project (registered or unregistered). 8.1 issues 64-bit are now essentially disappeared after massive but systematic troubleshooting. At no time were there any problems other than those two I mentioned.

  But, your problem...

  a. you have the latest version of QuickTime on your computer with Premiere elements 12?

  (b) you run the program run as administrator or an account with administrative privileges?

  c. What are the details of these blockages? They just open a new project? They come after you open an existing project? What is the size of the project freezing when frost occurs? What do you do in the timeline when the freeze happens?

  d. is your video card driver update according to the manufacturer of the video card?

  e. What is your Scratch disk location as to where they're headed and how much free space is where? See Edit Menu/preferences/Scratch disks. Search for ups of the bunch of files preview and compliant audio and video files.

  Please read the above, and then we can move forward according to your answer.

  Thank you.

  RTA

• is adobe reader, acrobat requires a reboot of the system for installation and improvement

  is adobe reader, acrobat requires a reboot of the system installation and improvement?

  Hi Harish,

  If you install it for the first time, it does not require a reboot. But if you repair the installation, it will require a reboot.

  Some quarterly updates require reboot. It also depends on when was the last time you rebooted the machine for the changes to apply.

• Could not keep the portal admin console repository connections.

  Hello
  I created the additional WLP (flow in function) repository in oracle.
  
  and configured as a data source in the server console. and added respective JNDI name in the portal administration console.
  and I could add/remove content. But whenever I'm restart the machine I'm losing the additional connection of the console to the configuration Portal admin console only.the connection server is safe.
  
  whenever I have to configure with same name JNDI add working with it in the portal administration console only, whenever I restart the machine.
  
  The content and data sources configuration is secure.
  
  
  but whenever I create additional repository WLP, I couldn't see the respective details have updated content - mgmt.xml in the meta-inf EAR.
  
  is that because of this. If so why is getting updated when it adds new connection in the administration console.

  When you create a connection of repository running with the administrator of the portal, the configuration is written to a Deployment Plan. By default, the deployment Plan is written in a location which can be removed during a redeployment of the application. You can specify a location for the deployment plan, that will not get deleted through the WebLogic Server Console or you can add the information to the/meta-inf content - config.xml in .

  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/prodOps/deployment.html#wp1045617

  Brad

• WebLogic portal 10.3.2 sample domain admin console question

  I use the domain example bundled with WebLogic Portal 10.3.2 for some tests. I'm trying to access the admin console, can someone tell me how to find the username and password to access the console? I thought that weblogic/eu1 was the default.
  
  Thank you

  The password for the user of weblogic in the WLP 10.3.2 domain example is "webl0gic" (note the use of zero the password).

  Brad

• Detcts iPod but ITunes "cannot correctly identify" uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify correctly.

  ITunes detects the iPod, but 'cannot correctly identify' uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify" during each step, also disconnected iPod USB port.

  Try the following (in that order).  Looks like you're using Windows (not a Mac), so I'll make this assumption...

  Shut down (power off) the computer, disconnect all the USB devices.  Plug the laptop power adapter, so that it does not work on battery power.  Do this Reset (reboot), the iPod

  Learn how to reset your iPod - Apple Support

  Start computer, run iTunes and connect the iPod to a USB direct on the laptop by itself.  If there is no difference, put the iPod in Disk Mode

  Put the iPod in disk - Apple Support Mode

  Then connect to the laptop again, always by himself.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  If you're OK with deletion of the iPod, do the restore.  See if the iPod is "correctly identified" after restoration.

  If the problem persists, you said you uninstalled and reinstalled iTunes, but may not have uninstalled iTunes and associated software components.  Follow the steps in this document to uninstall an iTunes installation components, in the order described all listed

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version of iTunes

  http://www.Apple.com/iTunes/

• Let me know if there is an option to differentiate is with the color of the tab or return background color tab. I use to open differrent pages on the same site in different tab or window, in order to identify each i

  Let me know if there is an option to differentiate is with the color of the tab or return background color tab. I use to open differrent pages on the same site in different tab or window, in order to identify each...

  Try:

  • Colorful tabs: https://addons.mozilla.org/firefox/addon/1368

• My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  Hello

  Make sure that Photoshop is closed.

  1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop

  You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.

  2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.

  It should be working fine now.

  Thank you

• Mail (version 9.3) frequently freezes, requires a reboot.

  Mail under El Capitan (10.11.6) freezes frequently. Rebuild my Inbox, sent messages, Junk, etc was not rectified the problem. Seems arbitrary? Anyone else having this problem? All possible solutions to this?

  Make a backup, preferably 2 on 2 separate drives.

  Exit the Mail.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder. Go to Library/Containers/com.apple.mail.  Move the folder com.apple.mail on your desktop. You must move the entire folder, not just the content.

  Reboot, re-launch Mail and test. If the problem is resolved, recreate the required e-mail settings and import emails you want to save to the folder on the desktop. You can then put the file in the trash. If the problem persists, return the folder where you have guessed replacing one that is there.

  If he does not repeat the above using Containers/com.apple.MailServiceAgent.

  Information derived from Linc Davis. Thanks to leonie for certain information contained in this.

  Mail crashing

  Accidents / unexpected