VCB Helper for SCSI Hot-add and FULL-VM backups

Similar Questions

• Two virtual machines always "using network", while the rest of the cluster is "using SCSI hot add.

  The testing of VDR 1.2 in a cluster 4.1 with around 60 virtual servers.

  I have two Windows Server 2008 R2 VMs who is always using the network, with a full tank and after that all incremental backups.

  Nothing matches the conditions of the related knowledge base article and there are several other 2008 R2 servers deployed from the same template that uses SCSI hot add.

  The only thing that differs from the other virtual machines, it is that both are mailbox servers in a cluster, Exchange 2010 DAG.

  OLE Thomsen

  Check the block size for VMFS data store where the VDR-appliance is running. If the larger disk of your virtual machine is greater than the maximum file size of supportet on the VMFS where the VDR, VDR uses the network instead of add to hot. Move another VMFS-store data in big block with the VDR solves the problem in my environment. Also, in this case when the disk you lorsque le disque vous sauvegardez back up is a RAW device physikal mode, which should be ignored for VDR, VDR, but makes the network backup of the other disk of this virtual machine.

  Paul

• Need help for upgrade of RAM and hard drive for HP Pavilion dv6-2130ej

  Hello.

  I have the HP Pavilion dv6-2130ej with windows 7 Home Prem OA system.

  1. I would like to improve my RAM from 4 GB to 8 GB memory.
  2. I would like to add another hard drive instead of CD space.

  Can you tell me please, what I need to change the card of 4 GB to 8 GB card or is there another place to add a 4 GB card more?

  In any case, I would like to get a memory card description that corresponds to my computer so I do not buy the wrong memory card. Characteristics of the witch, I do?

  Is it possible to add another hard drive to the computer instead of the Conference on disarmament and please tell me what parts do I need to buy and what is the maximum. Storage hard drive which may include my computer? There now 4RAM internal memory and 500 GB hard drive.

  I would like to make my PC as strong as possible because I use it for work with heavy programs editing and I need a lot of internal memory.

  Thank you for your help,
  Waiting for a response,
  You can contact me by email too
  [Personal information]

  Vira.

  Hello.

  I think you can install the drive and use your recovery disk to reinstall Windows.

  You can change the hard drive of your computer with a WD one Pavilion, just keep in mind that you need a 2.5 inch drive. In addition, if your Pavilion model is dv6500 or more, it has a SATA-II interface, but you can always take a drive SATA-III and it will not work (although will run at the lower speed of SATA-II).

  Here, you want to take a look at all our 2.5-inch drives:

  http://products.wdc.com/support/kb.ashx?ID=HzdPVS

  Hope this helps and let me know if you have any additional questions.

  See you soon!

• Little help for a Qosmio F50 and win 8 is required

  Hello

  I have an old Qosmio F50 and since he still has enough power to manage Windows 8 I decided to give it a try. What I did is a clean install of WIN 8 x 64 pro and I used a mixture of various models of Toshiba drivers and third parties. The results were not bad, since everything works except for a weird thing.

  Specifically, I used:
  -Drivers of the Chipset V, 9.4.0.1022 directly from Intel.
  -V with Toshiba HD processor driver, 1.0.2.71
  -Enecir v. 2.7.4.1 drivers
  -Realtek High definition audio drivers R271
  V battery Bluetooth 8.00.12 (T)
  -VGA Nvidia 320.49 drivers
  -ALPS V8.x0.303.206 drivers for the touchpad
  -Camera assistant software v 1.7.260.0526L (a bit unstable and settings reset every now and then, but always functional.) The most recent camera app couldn't handle the old Chicony)
  -Everything was provided by Windows Update.

  And finally, I used:
  Toshiba 1.00.6626.06 function key, cards Flash 1.51.8.2C (version b) .and v.1.3.3.64 SpecApp.exe (aka the button support)

  The only problem I have is with the touch media buttons. While working as it should and I can remap them with the SpecApp.exe very well, they do a crazy thing:
  Sometimes, as well as the proper functioning of the button will open also calculator of windows which is quite annoying. I tried many things including the search in the registry, but I couldn't find a way to solve it, so if someone could help that would be great.

  Other than this problem, everything works just perfect, including all FN keys.

  Thank you for reading and if you have an idea I'm all ears.

  It is always a challenge to such experiences as new installation OS on an old machine and unsupported. Let's see if someone else with the same machine had success with Win8.

  Anyway, there is always something that will not work correctly. The key is that most of the stuff works well, so if you will not be able to find the solution for touch buttons, in my view, that it's not so bad.

• Need help for recovery from msn and Xbox Live, think have been hacked

  I'm having a terrible time trying to recover my password, my game with Xbox Live, the period of my account, I asked for help on the phone several times Urgghhh! . I have a gold Xbox Live subscription and have not been able to PLAY!. 3 week or two, I created a new account so that I could try to change the information, so far failed to get anywhere, I think that my account has been hacked and my information stolen, please help!  Here are the two
  1 tries to recover - * address email is removed from the privacy... * A new created * address email is removed from private life * thanks for your help...

  You can try to consult the following link:

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  And he steps.

• Need help for export to PDF and transparency issues

  Thanks to this community, my InDesign files are almost free WARNING , but I still have the following warnings in the preflight:

  The PDF document using the features requiring at least Acrobat 5.0 (PDF 1.4) [someone suggested I do that - is this correct?]

  Used transparency (transparency group)

  Used transparency (soft mask in the image)

  Police is incorporated (either completely or as a subset)

  I export to PDF.

  I have merged my diapers.

  What should I do?

  Here is a summary of my settings:

  Description

  [Based on "[print high quality]"] Use these parameters to create Adobe PDF documents for print quality on the ovens and desktop printers.  Creating PDF documents can be opened with Acrobat and Adobe Reader 5.0 and later versions.

  Setting predefined PDF: CreatespacePreset

  Compatibility: Acrobat 5 (PDF 1.4)

  Compliance with standards: no

  General

  Pages: all the

  Spreads: Off

  View: default

  Layout: default

  Full screen: off

  Generate thumbnails: Off

  Optimize the PDF: on

  Create Acrobat layers: n/a

  Export of layers: visible and printable layers

  Include bookmarks: Off

  Include hypertext links: Off

  Export nonprinting objects: Off

  Export the visible guides and baseline grids: Off

  Create the tagged PDF document: on

  Interactive elements: exclude the

  Compression

  Color images

  No change sampling

  for the above images: 450 ppi

  Compression: automatic

  Size: n/a

  Quality: maximum

  Grayscale images

  Bicubic Downsample to: 300 dpi

  for the above images: 450 ppi

  Compression: automatic

  Size: n/a

  Quality: maximum

  Monochrome images

  Bicubic Downsample to: 1200 dpi

  for the above images: 1800 DPI

  Compression: CCITT Group 4

  Compress text and line art: on

  Crop the Image given to executives: on

  Marks and bleeds

  Crop marks: Off

  Brands of purge: Off

  Registration: Off

  Color bars: Off

  Information page: Off

  Brand page type: default

  Weight: 0,25 pt

  Shift: 0,0833 in.

  Use Document bleed settings: on

  Purge at the top: 0 in

  Bottom purge: 0 in

  Purge inside: 0 in

  Bleed outdoors: 0 in

  Slug area: Off

  Output

  Color conversion: no color Conversion

  Destination: n/a

  Profile Inclusion policy: include all profiles

  Simulate overprinting: n/a

  Output Intent profile_name: n/a

  Output condition: n/a

  The identifier for the exit Condition: n/a

  Registry name: n/a

  Advanced

  Subset fonts below: 0%

  Omit PDF: Off

  Omit EPS: Off

  Omit Bitmap Images: Off

  Transparency flattening preset: n/a

  Ignore spread overrides: n/a

  Security

  N/A

  Caveats

  Thank you

  Susan

  These warnings are not a problem for the export settings you use, not for CreateSpace so they can take the dynamic transparency.

• Need help for the restoration of the level 1 backup

  Hello!
  
  I am trying to create my database on a new server using hot rman incremental backups.
  
  I already restored and retrieved my database of level 0 on the new server, but I am not able to restore/recover the level 1 backup of the new server. I transported irom backup level 1 the old server to the new. What I need to get lvl 1 bkp only or also to restore it.
  
  Can someone help me on this problem by specifying the steps to restore/recover backups incremental level 1?
  
  Thank you!

  If the recovery has been completed and "tables are not present", this means that the tables were not present at this SNA. Either they were created after the SNA GOLD were dropped from the later the RCS.

  You must have block change tracking for restoration. It is used for backups only (and it of okay if she was present or not in the backup).

  Hemant K Collette

• Hot Add Remove lun fails in rescan periodical at the time of the withdrawal, although the path is marked as DEAD as planned

  So we run the hot add and remove cases from LUNs in the certification for ESX 5.5 with Workbench 3.0 kit

  The hot add succeeds to the two manual add and periodic scan... Deletion succeeds manual extraction, but a failure in periodicals rescan same removal so it lists the path out of SERVICE.

  Here are the logs

  [August 26, 2014 20:01:29: WLMANAGER] [0] FRAME: no charges Found.

  [August 26, 2014 20:02:25: HOTADDREMO] [0] INFO: hot test add using RESCAN

  [August 26, 2014 20:07:55: HOTADDREMO] [0] INFO: performance of rescan the first server

  [August 26, 2014 20:08:28: HOTADDREMO] [0] INFO: found new LUN eui. 48d8bf5f64e64100

  [August 26, 2014 20:08:28: HOTADDREMO] [0] INFO: add hot with the new analysis is the first server

  [August 26, 2014 20:08:28: HOTADDREMO] [0] INFO: Running rescan the second server

  [August 26, 2014 20:09: HOTADDREMO] [0] INFO: found new LUN eui. 48d8bf5f64e64100

  [August 26, 2014 20:09: HOTADDREMO] [0] INFO: add hot with rescan is the second server

  [August 26, 2014 20:09: HOTADDREMO] [0] INFO: hot test add using PERIODICALLY RESCAN

  [August 26, 2014 20:15:05: HOTADDREMO] [0] INFO: Test runs on the first server

  [August 26, 2014 20:15:06: HOTADDREMO] [0] INFO: found new LUN eui.48d8bf5f64e64200

  [August 26, 2014 20:15:06: HOTADDREMO] [0] INFO: add hot with the new analysis from time to time, is the first server

  [August 26, 2014 20:15:06: HOTADDREMO] [0] INFO: Test runs on the secondary server

  [August 26, 2014 20:15:08: HOTADDREMO] [0] INFO: found new LUN eui.48d8bf5f64e64200

  [August 26, 2014 20:15:08: HOTADDREMO] [0] INFO: add hot with periodically rescan is the second server

  [August 26, 2014 20:15:10: WLMANAGER] [0] FRAME: no charges Found.

  [August 26, 2014 20:16:07: HOTADDREMO] [0] INFO: hot control remove using RESCAN

  [August 26, 2014 20:17:27: HOTADDREMO] [0] INFO: hot execution removes the test on the first server

  [August 26, 2014 20:18: HOTADDREMO] [0] INFO: LUNS deleted eui.48d8bf5f64e64200

  [August 26, 2014 20:18: HOTADDREMO] [0] INFO: Test successfully on the first server

  [August 26, 2014 20:18: HOTADDREMO] [0] INFO: hot execution removes the test on the second server

  [August 26, 2014 20:18:33: HOTADDREMO] [0] INFO: LUNS deleted eui.48d8bf5f64e64200

  [August 26, 2014 20:18:33: HOTADDREMO] [0] INFO: Test passed on the second server

  [August 26, 2014 20:18:33: HOTADDREMO] [0] INFO: hot control remove by using PERIODICALLY RESCAN

  [August 26, 2014 20:23:20: HOTADDREMO] [0] INFO: Test runs on the first server

  [August 26, 2014 20:23:21: HOTADDREMO] [0] INFO: check the path to removed LUN on the first server

  [August 26, 2014 20:24:17: TRANSPORT] [0] FRAMEWORK: running cmd 'esxcfg-mpath - bd eui.48d8bf5f64e64100' mode of blocking on the host 'esxia.amiads.com '...

  [August 26, 2014 20:24:17: STAFBASE] [0] FRAMEWORK: command execution STAF: staf esxia.amiads.com PROCESS SAMECONSOLE RETURNSTDOUT RETURNSTDERR WORKDIR SHELL START / WAIT COMMAND esxcfg-mpath - bd eui.48d8bf5f64e64100

  [August 26, 2014 20:24:18: STAFPROCES] [0] FRAME: host esxia.amiads.com returned eui. 48d8bf5f64e64100 : * iSCSI disk (eui.48d8bf5f64e64100)

  vmhba34:C0:T65:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

  vmhba34:C3:T65:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

  
  

  [August 26, 2014 20:24:27: HOTADDREMO] [0] ERROR: LUN is found not deleted after periodic rescan on the first server

  
  

  So I checked the Vmware perl code that performs this case... it is available at /opt/vmware/VTAF/storage50-cert/VTAF/Test/Storage/StorageCert/FVT/HotAddRemoveLUNs.pm

  
  

  Sub RunHotRemoveTest

  {

  .....

  # Remove LUN only cause death I/O path.  It does not delete the LUN.

  # Evaluate for the dead I/O path.

  $deadPathFound = "NO";

  LogInfo (channel = > $channel, MSG = > "Check the path to remove LUN on $server");

  foreach my {$lun (@lunListBeforePeriodicallyRescan)

  #my $lunObj = $host2HbaObj-> CreateScsiLun (name = > $lun);

  $cmd = "esxcfg-mpath - bd $lun";

  My $cmdObj = new VTAF::Framework:Core:Common:Command)

  Home = > $host2Obj-> GetName();

  Cmd = > $cmd);

  my $rc = $cmdObj-> GetReturnCode();

  my $cmdResult = $cmdObj-> GetStdout();

  my $cmdError = $cmdObj-> GetStderr();

  If ($cmdError) {}

  $deadPathFound = "YES";

  LogInfo (channel = > $channel, MSG = > "mpath command returned: $cmdError");

  LogInfo (channel = > $channel, MSG = > "$lun is deleted after periodic rescan");

  }

  }

  If ($deadPathFound not 'YES') {}

  LogError (channel = > $channel, MSG = > "LUN is not deleted after periodic rescan on the $server");

  return FAILURE;

  } else {}

  LogInfo (channel = > $channel, MSG = > ' delete hot with periodically rescan PASSED on the $server ");

  }

  }

  So if you see the code above, Vmware itself expected the path to show the death, but they perceive three error codes for the output of esxcfg-mpath - bd < lunname >

  I think they expect an error to return to $cmdError... But looks at though it lists the path as DEAD, she returns to success... So the $deadPathFound is always set to no. He goes into the path of "not YES" and not the test case...

  I would like to open a folder from supported with VMware, but before that I would like to know if someone has faced this problem and had this problem of VMware using any patch in their Workbench... Or if any new workbench has this problem fixed...

  We are using Vmware Test Manager: 3.0.0 - 1610638

  5.5 storage certification: 3.0.0 - 1337995

  VMware Workbench say 3.0.1

  Than I went back to our older certification with ESX 5.1 where this matter has passed... and was able to check the logs. It has been performed with Workbench 2.0. In this they executed a more order "peripheral storage esxcli list d lunname" and lists the path as dead and also properly detects the dead path and scored the try with the... Unfortunately I don't seem to have their old code to compare with...

  [July 27, 2012 12:34:06: SCSILUN] [0] FRAMEWORK: check if the 'eui.93bb4a37348e4100' lun is available or not.

  [July 27, 2012 12:34:06: TRANSPORT] [0] FRAMEWORK: running cmd ' esxcli storage device base list d eui.93bb4a37348e4100 ' mode of blocking on the host 'esxia.amiads.com '...

  [July 27, 2012 12:34:06: STAFBASE] [0] FRAMEWORK: command execution STAF: staf esxia.amiads.com PROCESS SAMECONSOLE RETURNSTDOUT RETURNSTDERR WORKDIR SHELL START / WAIT COMMAND esxcli storage base device list d eui.93bb4a37348e4100

  [July 27, 2012 12:34:07: STAFPROCES] [0] FRAME: host esxia.amiads.com returned eui.93bb4a37348e4100

  Full name: * iSCSI disk (eui.93bb4a37348e4100)

  Definable display name: true

  Size: 2048

  Device type: Direct access

  Multichannel plugin: NMP

  Devfs Path: /vmfs/devices/disks/eui.93bb4a37348e4100

  Seller: * I

  Model: *.

  Review: 2 0 s

  SCSI level: 4

  Is nickname: false

  Status: dead

  RDM Capable is: true

  Is Local: false

  Is removable: false

  SSD is: false

  Is Offline: false

  Is perpetually booked: false

  Thin Provisioning status: Yes

  Attached filters:

  VAAI status: unknown

  Other UID: vml.01000000003933626234613337333438653431303053746f725472

  [July 27, 2012 12:34:07: MULTITECH] SETTING [0]: called VTAF::TestLib:Sphere:Storage:Lib:CLI:ScsiLun:IsLunAvailable (Password='password@123' Username = 'root' HostName = 'esxia.amiads.com' LunName = 'eui.93bb4a37348e4100') returns '1'

  [July 27, 2012 12:34:07: TRANSPORT] [0] FRAMEWORK: running cmd 'esxcfg-mpath - bd eui.93bb4a37348e4100' mode of blocking on the host 'esxia.amiads.com '...

  [July 27, 2012 12:34:07: STAFBASE] [0] FRAMEWORK: command execution STAF: staf esxia.amiads.com PROCESS SAMECONSOLE RETURNSTDOUT RETURNSTDERR WORKDIR SHELL START / WAIT COMMAND esxcfg-mpath - bd eui.93bb4a37348e4100

  [July 27, 2012 12:34:08: STAFPROCES] [0] FRAME: host esxia.amiads.com returned eui.93bb4a37348e4100: * iSCSI disk (eui.93bb4a37348e4100)

  vmhba34:C1:T65:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

  vmhba34:C0:T65:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

  [July 27, 2012 12:34:08: HOTADDREMO] [0] INFO: eui.93bb4a37348e4100 died because of the LUN to remove test

  So basically had the question warm Add Remove Lun. It is a problem in the ESX version we use and scripts of WorkBench. If we use the build ESX GA this would have worked. ESX changed the behavior of the command in version 5.5 of GA to a new approach and then back to the old approach again in 5.5 Update1.

  The version we use are two versions higher than the release of GA... Therefore, the behavior of this command is different between these two versions.

  ESXi 5.5 Patch 2	2014-07-01	1892794	N/A
  ESXi 5.5 Patch Express 4	2014 06-11	1881737	N/A
  ESXi 5.5 Update 1 has	2014-04-19	1746018	N/A
  ESXi 5.5 Express Patch3	2014-04-19	1746974	N/A
  ESXi 5.5 Update 1	2014 03-11	1623387	N/A
  ESXi 5.5 Patch1	2013 12-22	1474528	N/A
  ESXi 5.5 GA	2013-09-22	1331820	N/A

  
  

  This is the behavior in version 5.5 GA ESX

  ~ # vmware - v

  VMware ESXi 5.5.0 build-1331820

  Added the target

  ~ # esxcfg - mpath - bd eui.3db57bdc252c0200

  1. EUI.3db57bdc252c0200: FRIEND iSCSI disk (eui.3db57bdc252c0200)

  vmhba34:C0:t0:l0 LUN:0 Status: active iscsi adapter: iqn.1998-01.com.vmware:5213e0fa-31de-329a-5885-002590135b9e-17c7a47e target: IQN = iqn.1991 - 10.com.ami:itx002590135d84e923:l.v10 Alias = Session = 00023 000002 PortalTag = 5 d

  ~ # echo $?

  0

  Removed from the target

  ~ # esxcfg - mpath - bd eui.3db57bdc252c0200

  Device eui.3db57bdc252c0200 unknown

  ~ # echo $?

  1

  Now the version of ESX 5.5 Update 1, we use

  Added the target

  ~ # vmware - v

  VMware ESXi 5.5.0 build-1623387

  ~ # esxcfg - mpath - bd eui.5b5fbb54c4d80200

  1. EUI.5b5fbb54c4d80200: FRIEND iSCSI disk (eui.5b5fbb54c4d80200)

  vmhba38:C1:t0:l0 LUN:0 Status: active iscsi adapter: iqn.1998-01.com.vmware:5405e3db-f95e-9f9c-e99b-0025900cab82-01a17ffb target: IQN = iqn.1991 - 10.com.ami:itx00259014329a26b:l.sharontest Alias = Session = 00023 PortalTag = 9 000002 d

  ~ # echo $?

  0

  Removed from the target

  ~ # esxcfg - mpath - bd eui.5b5fbb54c4d80200

  1. EUI.5b5fbb54c4d80200: FRIEND iSCSI disk (eui.5b5fbb54c4d80200)

  vmhba38:C1:t0:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

  ~ # echo $?

  0

• UCS hot add/replace memory/CPU

  Hello. I know on cisco UCS C460 we can expand the amount of memory using memory riser cards. Memory riser cards are hot-swappable. This means that when I run Win2008R2 Datacenter Server c460 I can hot add and replace the memory riser card memory?

  Can I hot replace memory on the motherboard slots?

  What UCS server models are supported CPU hot add/replace?

  Dmitry,

  Yes the risers of memory are hot-swappable, so assuming that the bare metal OS can support memory added to hot it will work.

  There is no DIMM slots on the motherboard directly on the C460.  Memory riser is only motherboard for memory interfaces.

  There is no such a thing to my knowledge as an addition to hot CPU on all Cisco platforms.

  See the Installation Guide HW for more information:

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C460/install/replace.html#wp1160169

  Kind regards

  Robert

• Hot add RAM through workflow

  I'm working on a workflow to change the RAM/vCPU for a VM given, ideally using hot add, and it seems to be running into a problem with the memory part. My plan is to just get something working for now, and then add the logic to treat various conditions (hot don't add not activated/VM under tension, etc.).

  So far, I have a relatively simple workflow (see below). The virtual machine in question has 2 GB of RAM and is turned on.

  

  I looked also directly using the workflow change in RAM, but it gives me the same error. I use vSphere 5.5, vCO 5.5.2 - of ideas?

  EDIT: I should mention that my test VM THAT hot add activated, it is supported by the OS, I have the license appropriate, and that VMware tools are up-to-date.

  I found the problem... it turns out that Linux 64 bit guests with less than 3 GB of RAM can only warm - add up to a total maximum of 3072MB. If you're at 3071 MB, you can add only hot 1 MB. If you're 3073, you can add warm all the way up to 20 GB if you wish.

  There is a KB for this: KB2008405.

• Need help with Exchange 2010 Diag and implementation

  I NEED HELP FOR EXCHANGE 2010 DAG AND THE IMPLEMENTATION THAT CAN HELP-IM I IN THE RIGHT SUPPORT GROUP?

  Hello HectorLopez_790,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question with Exchange would be better supported in the TechNet forums.
  Click here for a link to transfer your question in the forums of Exchange.

  Thank you

  Marilyn

• Hello I need help for OCR multiple files

  Hello I need some help for OCR multiple files and I found that batch OCR multiple should be the solution, but I can't with Adobe Acrobat Pro DC. Pleas help me

  You will find in the Action Wizard.

• Download Support Manager: where can I download the docs PDF help for CS6?

  Folk in the morning,

  I hope you can help me with my problem with the help managing the CS6. I´d want to download the documentation for Illustrator and Photoshop as local files, but the menu status tells me that these files are not available. I can also activate the "Refresh" button, it seems grey. This also happens when I try to use the option to manually update the files.

  This may seem a little short in the eyes , but I can't find versions of language of the pdf version of the manuals when I manually search for. Are only available in English?

  Help for Creative Suite CS5 and CS5.1, CS5.5 applications documents, CS6 (HTML and PDF)

• Help with Script to add Hot CPU/Mem to large number of virtual machines

  So I found these two functions of http://ict-freak.nl/2009/10/05/powercli-enabledisable-the-vm-hot-add-features/comment-page-1/#comment-14664

  He

  seems to be only for a unique virtual machine, but I need to set up

  their making hundreds of multiple servers.  Is it possible to implement

  foreach ($vm to $devVMs)

  $devVMs = c:\listofvms.txt

  in

  the script to point to a list of virtual machines, such as a list of Windows 2008 64-bit

  VMs, vms 32 bit Windows 2003 as another list etc. instead of making a virtual machine

  at the same time.

  The two functions are for features to add memory to warm and the VM OS per CPU.

  Function Enable-MemHotAdd ($vm) {$vmview = Get - vm $vm |} Get-view$ vmConfigSpec = New-Object VMware.Vim.VirtualMachineConfigSpec$ extra = New-Object VMware.Vim.optionvalue$ extra. Key = "MEM.hotadd" $extra. Value = "true" $vmConfigSpec.extraconfig += $extra$ vmview. ReconfigVM ($vmConfigSpec)}

  Function Enable-vCpuHotAdd ($vm) {$vmview = Get - vm $vm |} Get-view$ vmConfigSpec = New-Object VMware.Vim.VirtualMachineConfigSpec$ extra = New-Object VMware.Vim.optionvalue$ extra. Key = "vCPU.hotadd" $extra. Value = "true" $vmConfigSpec.extraconfig += $extra$ vmview. ReconfigVM ($vmConfigSpec)

  }

  Any help is greatly appreciated.

  You can save this script in a .ps1 file.

  After have connected you to the vCenter (Connect-VIServer), you run the script from the prompt PowerCLI.

  .\myscript.ps1
  

  It will read all the guestnames that you stored in the .txt file and for each of these calls to the function.

  If you need to address another group of guests you modify the contents of the .txt file and run the script again.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• [SOLVED] I need help for Shared Documents and Documents on my computer XP Home

  I need help with my shared Documents and other folders on my computer. I have an administrator account. My son has a limited access account.

  I clicked on the option 'make my private files and folders '.  His file was renamed to Documents now my shared Documents. It's just my account.

  I tried to undo what I did. I tried everything (I mean everything) has proposed to do online.

  First of all, I logged in Safemode administrator account. I went to the Documents folder, and I've added the Administrators group and click full control.

  Then I restored system a few weeks before. Then, I went to http://computers.douglasthrift.net/winxpfaq/#faq3_shared_documents and did everything.

  None of them worked. I did so much, that I don't remember.

  Then, I found that the registry key for the Shared Documents lacked in the MUi cache. @shell32.dll,-21785. I entered, but after I rebooted a few times, he disappeared. I have to hurt... In addition to this. Now I face a different problem. I don't know it is normal but when I login my account and click on

  My computer, I see Documents of my name and the name of my son in addition to Documents (Shared Documents).

  When I save a new file in the My Documents folder, it is automatically created in the folder of Documents of my name, too. I can't delete them because they are system folders. I crossed my registry keys in the MUI cache and discovered that 4 of them did not exist in other accounts.

  @shell32.dll,-21792; 21793; 21794; 21795 (%, etc. of music of % documents). I don't know if I can delete them or not.

  I'm not an expert in computers. I'm sorry that it is very long.  I hope someone can help me. Thank you.

  Hello

  I suggest you follow the troubleshooting steps and check if this solves the problem on your computer.

  Method:

  Ra SFC scan to search for the missing or corrupt files that can cause this problem.

  Of file system (CFS) when checking that all the Windows XP system files are intact and not altered, changed or damaged.

  a. Click Start, click programs, accessories, command prompt principally made.

  b. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  If you are prompted to insert the Windows XP disc, load the disc of Windows XP on the CD drive on your computer.

  Once the scan finished restart your computer and test to see if the problem you are experiencing is resolved or not.

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  I hope this information helps. Please get back to us if you have any other questions on this subject.