VCB on the same servers as backup software

Similar Questions

• How to lock a folder and at the same time enable backup software to access?

  Hello.
  We have 10 systems in our office and an additional computer that acts as a backup server for the important files and folders. However, due to security issues, we want the whole (the inside which are backups) must be locked down and only accessible by providing authentication (e.g. a password). but the problem is that if I block the folder, the backup software may not work.
  Is there a way around this so that whenever anyone attempts to access a file/folder from the server, it will have to enter a password (remember that it is access to the its system which is connected through lan server) and the same brand of time the work of backup software?

  Hello.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, windowsvistaitpro, windowsxpitpro, windowsintune

• VCB on the same server as vCenter?

  Hi, I would like to know if it is possible to host vCenter and VCB on the same server.  and is it recommended?    Server will have 2 processors quda and 16 GB of ram.

  With the latest version of infrastructure 3.5 is now possible to have on the same machine both VCB and VC.

  In any case, you might have to VCB proxy + backup on the computer program physics and VC on a VM.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Satellite A660 - imaging the HARD disc using backup software

  I have an A660. I decided to do a system backup wholw with acronis image home for an emergency. My Quesntion is how are reserved windows make a picture of the toshiba backup partition?

  If I save all 3 partitions above I can restore them individually in case of need arise or I need to get all 3 drives together?

  I just support gelt upward the C drive will no longer Toshiba as its own MBR wrote. I don't mind also save the recovery tohsiba partition too much like its much faster than recovery DVDs.

  Please notify

  Hey,.

  I would recommend a full backup of all partitions. Toshiba recovery partition doesn't need a lot of disk space and recovery environment partition Windows is required, as far as I know, but there are also less disk space.

  With a backup complete all partitions, you are on the safe side and so you can ensure that you have the same settings after doing this.

  In addition if you want to restore the image, Acronis will ask you what you want to restore partitions. So it s always a good idea to make a backup of all partitions.

• I have Vista Home Premium 32 bit: can I switch to a 64 bit OS and keep the same apps, hardware and software, I already have?

  I have a system of 3 GB/500 GB HD in Inspiron 530 Dell, Vista Home Premium 32-bit.  I need to restart more frequently and the system works more slower and slower... so I think the upgrade.  Can I move to a 64 bit OS in Windows 7 or 8 and keep the same hardware and software, applications that I already like Office 2007, Photoshop Elements, etc... ?  What are the benefits to 64-bit?

  Hello

  There is no way to upgrade from 32 bit to 64 bit.

  It should be down with a clean install.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• (1) in windows 8 pro can I run windows defender and 3rd party antivirus [like Mcafee] at the same time?

  Today, I have improved my final from Windows 7 to Windows 8 pro.

  (1) is Windows Defender, it works both as the same as MacAfee antivirus software?

  (2) if I use windows defender in windows 8 pro, do you think that I still need 3rd party antivirus software to protect against viruses and malware?

  (3) can I activate and simultaneously run 3rd party software [McAfee] antivirus and windows Defender 8?

  (1) # Windows Defender is an anti-spyware, and Mcafee's anti-virus.

  (2) Yes

  (3) Yes

  UTC/GMT is 03:46 Sunday, October 28, 2012

• RAC: Installing several "different SID" RAC installs on the same Unix/Linux server...

  Hello my good people.

  I had to see if this is possible.

  Lets just keep things simple from the start.

  Let's say I have 2 Linux servers called "nodes 1 and 2.

  Nodes 1 and 1 have an installation of RAC 11 GR 2 running with the $ORACLE_SID defined as "XEV".

  NOW,.

  This is where I ran into some trouble.

  I have an another Oracle database that I need to install "RAC 11 GR 2" but the $ORACLE_SID will be different and it will be called 'Kai '...

  But I want to do it on the same servers Linux two 'nodes 1 and 2'... You following me now?

  So, in other words, I have 2 totally different databases that need to be "CARS" which will have to live on the same 2 nodes?

  Is it STILL Possible?

  Please let me know... This could be a "show stopper"...

  Yes, it is possible. And here is the easy way to do it... fire upward the database Creation Assistant (DBCA). The utility will create another data base, same CARS, on the same server. It is also for the databases punctual too. The DBCA Wizard will ask you a few questions and you will have this second database running on the same cluster Oracle RAC in no time.

  If it is possible to have multiple databases running at the same time, remember that each needs its share of the resources of the operating system. So make sure you have plenty of CPU, RAM and able to support all the running instances on the node for disk i/o.

  HTH,

  Brian

• dblink to an instance on the same server

  Suppose I have two Oracle instances that sit on the same physical server. In one case, I create one dblink to another and this dblink allows to define a view as select * from sometable@dblink. Will there be of the type involved in the trafficking network restrictions (for example limited to the current network interface physical bandwidth as 100 Mbps, 1 Gbps) causing overhead tiny as these instances be on separate physical machines? In other words, is this dblink between instances the right way to go, or maybe there is possibility to enjoy a few additional mechanisms for these two instances provided the fastest way possible (and assuming that created the view above)?

  Thank you

  If the two instances are on the same server, LAN drivers/software can resolve the IP address of the connected 'server' as the local host, so he won't need to go out on the network (if possible, why not try unplugging the network cable from the server and see if it works again - assuming, of course, the network is not necessary for the duration).   The connection will pass through the network interface on the same server and communicate via the relevant port that the instance is configured on.

  This isn't really any different to having an instance of database installed on a computer not connected to the network that you connect then on this same computer by using any client interface, it will be always access it through the port on which the database is listening, but there is no need for any network physical to exist.

  As separate bodies, then using dblink is probably the method appropriate and common use.

• Can deploy us the BPM and Webcenter on the same weblogic domain?

  Hello
  
  We have a clustered environment with two managed servers configured for SOA.
  Now, we are looking to integrate BPM webcenter Portal app custom lists. In this process, we can create and deploy a custom on the same servers SOA webcenter Portal app? Help, please.
  
  Thank you
  Suren.
  
  Published by: Suren on 8 may 2012 09:25

  There is something called space process which is BPM into spaces Webcenter which can be installed on the same domain

  http://andrejusb.blogspot.in/2011/02/BPM-Portal-11g-PS3-how-to-configure.html

  Like yours is a custom portal WC I would suggested using separate for ADF and SOA managed servers to balance the load and to separate the concerns...

• Management node for two areas located on the same server

  I need help to understand how to set up management node for two areas on the same servers. My configuration is:
  
  Server A:
  AdminServer to area D1
  ManagedServer1 area D1
  ManagedServer2 domain D2
  ServerB:
  AdminServer for domain D2
  ManagedServer1 domain D2
  ManagedServer2 area D1
  
  Just to clarify, D1 and D2 are dev and qa environment. WebLogic configurations and domain are all in different and completely separate folders.
  
  I started a manager based on java node on each server. Managers node configs are in different folders as well. Something is messed up, because it does not work properly. For example when I start nodes on server B Manager, he kills AdminServer for D2.
  
  Can I have that one manager of the nodes in this configuration, and the problem is in the config somewhere?
  I should have a management node on each server for each domain (two per server node managers?)
  
  Sorry if this is a basic trick, I am newbie in the weblogic configurations.
  
  Thank you
  Oleg

  Not sure why you have several domains. A server administrator can manage multiple clusters in a single domain. A domain is just a group admin servers and clusters. You could do something like:

  Server A:
  AdminServer domain D1 with 2 groups C1, C2
  ManagedServer1 cluster C1
  ManagedServer2 cluster C2
  ServerB:
  ManagedServer1 cluster C2
  ManagedServer2 cluster C1

  that would allow you to use only 1 nodemanager by server

  With your current setup, make sure that each of your domains using a Nodemanager port separate from each other. The default value is 5556, so if two of your domains use the same port NM, there will be a problem.

  For example, with your domain name:

  Server A:
  AdminServer to area D1
  ManagedServer1 domain D1 - use port 5556 NM
  ManagedServer2 domain D2 - use NM port 5557
  ServerB:
  AdminServer for domain D2
  ManagedServer1 domain D2 - use NM port 5557
  ManagedServer2 domain D1 - use port 5556 NM

  You will need set the nodemanager.properties and the configuration of the Machine in BOTH appropriate for each administration console. You should be able to run multiple nodemanagers on different ports.

• newbie... possible to install the VCB proxy on multiple servers?

  Hello... Is it possible to install the VCB proxy on multiple servers of the art on the same ESX server host computer?

  It is possible to use several VCB servers in your environment (we have 3), but they reference the virtual center to discover the virtual machine rather than directly to each host...

  You can use several servers VCB to connect on the same host if you carefully scripted specific vcbMounter commands to complete your backups...

• Agent backup and VirtualCenter Server on the same computer?

  It's maybe a stupid question but I in the phases of planning for virtualization of a bunch of servers I know none better yet.

  We will use Tivoli Storage Manager for snapshot backups and files.

  Can I have the same physical machine Act to the virtual host and backup VCB agent or if it was a separate machine?

  We will have 2 LUNS on an iSCSI Equalogic PS500X and 10-12 VMS box.

  Thank you

  Jeff

  It is possible, but not recommended.  This was taken from the VCB release notes:

  VirtualCenter 2.5 and Consolidated Backup can coexist on the same system. However, because the Consolidated Backup proxy has to be locked down as much as possible, VMware does not recommend this configuration.

• First Time Machine to NAS backup freezes at the same point, Console polluted by the same mistakes.

  I just configured my LaCie 5big Network2 act as a time Machine, but it is not back up correctly. When I run it always freezes at 14.70GB/237.71GB, even after deleting the backup and starting up again. I don't know if it of related or not, but the Console is littered with the same error messages (even if Time Machine is not running):

  

  If I stop the backup and restart it, it will get stuck after 7KB. If I delete the backup and starting a new one, it will get stuck at 14,70 Go again. This could be the cause? The NAS is configured correctly and firmware is up to date, disks are operational and functioning perfectly.

  My system is a 2015 retina MBP 15 "16GB / 500GB.

  Time Machine is a LaCie 5big Network2.

  LaCie can support this, but isn't Apple. the NAS can have its own propreitary features or a network can introduce the software is not designed for questions.

  If you want to use a NAS for backup, you can consider Carbon Copy Cloner as alternative

  For more information on the use of a 3rd party with network drive time machine see these article

  http://pondini.org/TM/2.html

  https://www.Google.com/?client=Safari#q=time+machine+over+network+drive

• can I back up and restore on the same beta software

  I want to restore my iphone 6 to solve some problem, but I'm on the iOS 9.3 public beta 4 and I don't know if I am able to back up and restore to the same beta version. My problem is not related to the beta software and I don't want to go down, I want to just restore without losing anything while remaining on the latest beta.

  Make a backup, archive, and restore it as a new phone, no backup.

  Restore will install iOS non-beta 9.2.1

  Update via Wi - Fi to the latest beta (you may need to reinstall the beta profile first), then restore it from the archive save set

• Store files and backup at the same time

  Hello!

  We have a very good software measurement work written in LabView. However, we want to save the data files on a regular basis. We want to be able to do this, even during the measurement, and then the software is written in the files. Now, when we try to do, we sometimes face 'error 5 has occurred to replace/create/open file' (in 'write in a spreadsheet file') because another software (backup, windows stuff, otherwise...) accesses the files too. Now my point of view this type of file matching should not be a problem since LV is the only writing software in the files. There are 3 possible solutions that I can think of:

  • delay writing (not possible because you don't know how long to delay, for example how long other software remains open)
  • the data in queue and write on the next test (e.g. https://decibel.ni.com/content/docs/DOC-7212 - but once again; how long in the queue?)
  • the good thing is; copy the temporary file to change temporary, delete the original and move the temp in this place

  the last should be the right solution and also work on different OS since the copy/move stuff should be atomic operations and therefore safe in this context. However, I have implemented the solution and always have exactly the same problem but now in 'move the file '... I begin to doubt if it is possible to solve this problem at all and so desparatly need help here! I can see it is not lock, or mutex on file and no need to LV generate an error (I think it's done as a warning to future potential conflicts)... I guess that's a few hidden/strange evil documented Windows API 'characteristic' LV uses to detect the other access and it results in a behavior I can't change or fix - up to what to do here...?

  Thank you very much in advance for helpful suggestions or advice! Greetings

  Ursin Soler

  I must correct myself here:

  • TDMS has not help at all - has exactly the same issues
  • only working solution at the moment is (protected) open the file start and keep this refnum open all the time until the program ends: reading and writing in the program can be done as before and ignore this protection refnum (open and close an another if necessary additional refnum) completely OR be implemented smarter and use the same refnum.

  Hope this helps someone else too.

  Using this method, I can now use for example MS robocopy to back up or all the data files in mirror while the LV program written in it. Something very fundamental and important for a recorder...

  Greetings