vCenter CapacityIQ Upgrade Guide
all can share me the guide vCenter CapacityIQ 1.0 to 1.5.1 upgrade?
How to extend the end of operating system of the virtual machine disk space linux. ?
Please specify what exactly you want to increase, if the procedure described in the link I posted above is not what you are looking for can.
André
Tags: VMware
Similar Questions
-
We have all the guests of ESXi 4.1 U2 and just got a new host ESXi 5. Now, we put our vCenter Server 5.0 to be able to access the host ESXi 5.0.
I don't know if we spend our vCenter server to 5.0 who it will be backwards compatible and will be able to manage ESXi 4.1 guests but are there negative side effects or what should I do before upgrading vCenter? And is it just a place in upgrade as if I were starting 4.1 U1 U2 for example?
Have you reviewed the Upgrade Guide? - http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-501-upgrade-guide.pdf it details the process of making an inplace upgrade
-
VMware Vcenter 5 upgrade Questions
Right now I have Esxi and Vmware Vcenter from version 4 to version 5. A few questions:
1. What is the easier and more average ordering to perform these upgrades?
2 should I have Vcenter loaded on a physical host, or is that to make a virtual machine? I currently have it as a virtual machine, but think it might be a problem that he won't be available for upgrades of the host on which the Vcenter VM is on.
1. What is the easier and more average ordering to perform these upgrades?
Make a backup of your DB vCenter, proceed with the installation of vCenter5. Then, you can use VMware Update Manager to upgrade your ESXi hosts. However, I would choose to do a reconstruction of working capital. vSphere5 is a major release.
2 should I have Vcenter loaded on a physical host, or is that to make a virtual machine? I currently have it as a virtual machine, but think it might be a problem that he won't be available for upgrades of the host on which the Vcenter VM is on.
Virtual appointments, it is fully supported and you get the benefit of the HA/Dr
-
vCenter Question Upgrade (requirement of http and https ports)
Hello
In vSphere Upgrade Guide, the documentation clearly indicates "vCenter Server 4.0 uses TCP/IP Ports 80 and 443, you _cannot _run vCenter Server on the same computer as a webserver using these ports, because this causes conflicts of port.
Now in the vCenter has always allowed me to change the ports by default during the installation, not only do this to avoid conflicts? My current virtualcenter server using ports 80 and 443 for a bunch of websites and I can't move. I don't have another server that has these free ports.
If any of you have changed the default http and https ports during installation (I even do that)? Problems? All comments in general? VCenter even use these ports for? I searched but could not find a definitive answer.
This is a very critical level and I'd rather not start it until I know exactly what to expect.
Thank you!!
Well the port 80 and 443 are generally webservices 80 http 443 https, it is no different with virtual center, they are used for web access to manage virtual machines etc.
and yes I have changed these on a server vc, when access to the content of the web services via the browser enough ":" at the end of the address
change change will require virtual center of service needs to be restarted
-
Discover 5.3 on Horizon 6.0 Upgrade Guide
Is their a guide to upgrade again for shooting up to the Horizon 6.0 5.3?
HI amurrey
Wait for the 6.0 GA Horizon, upgrade guide is normally available on the Horizon view documents here: VMware Horizon view documents
Thank you
Bayu
-
vCenter Agent upgrade during the upgrade from 5.0 to 5.1
I was hoping someone can answer a question for me please about the upgrade to vCenter Agent
By choosing the vCenter Agent upgrade, automatic choice would require guests be restarted? I guess that the answer is no, but here your audit. I have attached a screenshot for you to see.
What is best practice, automatic or manual. I have 1 datacenter, 3 groups. 1 cluster 5.0 other 2 clusters 4.1
Auto choice would require guests be restarted?
reset is not necessary...
If you choose the manual option you must goto each host and then re - connect the host so that the agent, VPXA gets upgraded and connected to vCenter
-
Fonts needed to upgrade guide?
I'm reading the 4.0 to 4.1 upgrade guide, but the PDF guard bombardment with 135 error, which indicates he calls fonts that are not found. Anyone know what fonts are required to read this PDF file?
HM... you use google chrome to read the pdf "inline", perhaps? I have the same problem, but if I save slot, Acrobat Reader works fine... Maybe need a glitch in the browser.
-
Problem with registry vCenter CapacityIQ process
I am trying to record the camera my 4.0 U1 installation vCenter CapacityIQ.
The process fails with the error message "cannot find the value for the ciq_vc_va_id, 201 key field.
I'm trying with vCenter IP address and domain FULL name and credentials used are administrator.
Not sure if relevant but the unit is currently DHCP.
I have attached a perl script that will delete the custom field that has entered an invalid state.
Directions for use:
1. download the file remove_custom_field.pm
2. copy this file in the directory ciqadmin on the BC home
If you are on a Unix machine, so you can use SCP: scp remove_custom_field.pm ciqadmin@CIQ_VA_IP :~/
3 SSH on GOING and change the permissions of file for the file. chmod 744 remove_custom_field.pm
4. run the script like:
Perl remove_custom_field.pm VC_IP VC_USERNAME VC_PASSWORD
For example, perl remove_custom_field.pm 10.20.178.32 my_user_name my_password
Now, try to save CapacityIQ with vCenter or from the portal administration or the command line.
-
vCenter 4.1 Guided Consolidation: bad powers or insufficient privileges
Hello
After a week of unsuccessful attempts (including harvesting, forums and search engines), I turn to the community for possible help.
I did the following:
- installed Guided Consolidation on our machine of vCenter Server 4.1.
- define two services to run under my high account (domain account / I have administrative rights on all our machines)
- restart the services for the changes to apply
- configured the plugin to use the my elevation (domain account)
- added three sweeping machines - on these machines I have my domain credentials explicitly in local administrators, in addition to having their granted by a security group.
all exceed the 1st phase of the analysis fails with 'Bad powers or insufficient privileges', although Guided Consolidation is able to correctly report info info CPU and memory. In addition, newspapers report a 'deniedexception' in their path, although I can't work on what goes wrong. All servers are running Windows Server 2003 R2 (32-bit).
I have seen articles noting that the account used for the detection/race services must have domain administrator privileges. Is this true? I have not one cannot ask such access in my environment. I want to exclude explicitly any comments pertaining to open ports, because computers are in the same network segment and are not protected by Firewall (or windows firewall or hardware fw).
Your help is greatly appreciated.
Thank you
Max
I don't think that you can upgrade one marked as 'useful' to 'correct '.
Basically, show you your own thread under your account and there should be a button on each post on 'mark as correct' or 'mark as useful'... not sure of the exact procedure that I usually tell people, to ask questions.
You can test the process on this post
Anywho, good to see that you are on the path of consolidation.
Best regards
Jon Hemming
-
Windows 7 Upgrade Guide for dv6000/dv9000 models
Statement:
You use this guide at your own risk. I take no responsibility for any problem.
Things you need to know and do before the upgrade:
1 HP may require that reinstall you Vista back if you have hardware problems to solve the.
2 HP will not help you if you have software problems because these models are not officially supported
with Windows 7.
3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.
4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .
If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.
5 users with nVidia graphics card should check the temperature of this device before upgrading.
In this way you will know is it works fine under Windows 7 also.
How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?
To do this use HWMonitor (free and recommended) or Aida64.
How do you know what model you have and the specifications for it:
1. click on the Support & drivers link. (The upper part of this page).
2. in the search box, type your computer laptop product (p/n) number.
Resources:
3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).
4. on the same page, click on Product Information -> specifications and you will find all the information on
your little laptop.
How to install Windows 7 and what you need to know during the upgrade:
1 guide: How to do a clean Windows 7 install
2. all drivers for Windows 7, you will find in the next post below.
3. some drivers have comment while they are initially made for Vista system.
During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,
Windows Vista Service Pack 1 and Windows Vista Service Pack 2).
Resources:
Make older programs in this version of Windows
How to run a program in Compatibility Mode in Windows 7
CHIPSET DRIVERS
Solution on COPROCESSOR with yellow exclamation mark ()
If you have Intel processor:
Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)
Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7)
If you have an AMD processor:
For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):
nVidia Chipset (Install and reboot before other drivers) here (Vista)
For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):
nVidia Chipset (Install and reboot before other drivers) here (Vista)
Important information for users with nVidia chipset!
If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.
GRAPHICS DRIVERS
Intel graphics:
Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)
nVidia Chart:
Important information!
If you have installed all the drivers for graphics card nVidia, then until you install the other version will be
you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller
( process):
How to remove drivers Windows system nVidia graphics.
Drivers:
nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:
OPTION 1
267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.
OPTION 2
Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.
Note:
Don't forget to first uninstall previous graphics driver.
nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:
OPTION 1
First try installing the Vista drivers for your model.
Resources:
How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?
OPTION 2
If the drivers will not work so try modded drivers worm 195.81.
Note:
Don't forget to first uninstall previous graphics driver.
How to install Windows 7?
1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,
2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.
3 install and reboot.
OPTION 3
Last thing you can do is install graphic driver from Windows Update.
Note:
Don't forget to first uninstall previous graphics driver.
1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '
Windows Update '.
2in the left pane, click " check for updates " and then wait while Windows searches the latest updates
for your computer.
3select the " optional updates " and install from there only driver for your graphics card.
AUDIO DRIVERS
Conexant HD Audio
Use the Vista drivers for your model.
Resources:
How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?
Realtek HD Audio
Use the Vista drivers for your model.
Resources:
How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?
If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).
"" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.
MODEM DRIVERS
Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant
Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card
HP QUICK PLAY
HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)
Notes:
- It must be installed before HP Quick Launch Buttons.
- You have installed this software and it crashes when you use?
Uninstall your current version of HP QUICK PLAY and install what you had in Vista.
Resources:
Uninstall software in Windows 7
Uninstall or change a program in Windows 7
If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.
HP Quick Launch buttons
Solution on KEYBOARD FILTER with yellow exclamation mark ()
HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)
WIRELESS DRIVERS
Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)
Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)
Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)
HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)
Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.
Note:
How to install the Bluetooth driver?
Click on the link below:
How to install the driver Bluetooth HP Windows 7.
ETHERNET DRIVERS
LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.
Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.
CARD READER
Solution on BASE SYSTEM DEVICE with yellow exclamation mark ()
Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)
TOUCHPAD DRIVER
Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)
Note:
Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:
How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.
ONLY IF YOUR MODEL: WEBCAM
CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)
Note:
If you have a problem with your webcam, check below links to HP documents:
Test a Webcam using your favorite Instant Messaging
3VRX (optional software)
on the screen the images and associated sounds that are displayed and heard when volume control
3VRX here (version 2.5 for 32/64-bit Win7)
Note:
Here is YouTube video that shows what you can do with this software.
ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
1. uninstall all software and previous fingerprint reader drivers
Check below how guide (only it's non-standard uninstall process):
How do I uninstall the driver and the AuthenTec fingerprint software
2 you can install now correct fingeprint reader driver and software.
There are two apps that are available on this device:
- AuthenTec TrueSuite
and
-DigitalPersona Personal (recommended).
Information on how to install the software you will find below guides:
AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7
DigitalPersona Personal fingerprint AuthenTec and Windows 7
ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE
How can you check is your DVD with Lightscribe drive?
The Panel of DVD, there will be a Lightscribe logo.
LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)
Report of the changes that have been made in the guide
Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41
Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)
Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host
Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.
Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software
Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1
Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)
Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in
Windows 7.
Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software
Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology
worm 9.6.0.1014
Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS
worm 197.16
Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software
Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software
Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112
Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless
15.0.13.3 worm
Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2
Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4
Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1
Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)
Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger
Scrolling in Synaptics TouchPad software.
Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology
Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install
Driver HP Bluetooth Windows 7
-
Windows 7 Upgrade Guide for dv2000 models
Statement:
You use this guide at your own risk. I take no responsibility for any problem.
Things you need to know and do before the upgrade:
1 HP may require that reinstall you Vista back if you have hardware problems to solve the.
2 HP will not help you if you have software problems because these models do not have their support
with Windows 7 system.
3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.
4. all drivers for Vista and preinstalled by HP software for your model are in the folder in C:\swsetup .
If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.
5. users with AMD processors have indicated that their models dv2000 were very quickly overheated after installation
Windows 7. So if you want to install this system and you have this processor to remember about this and be hypersensitive
on this issue.
How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?
To do this use HWMonitor (free and recommended) or Aida64.
CherylG (one of the best HP forum contributors who has model dv2000) has solved this problem by installing Windows
Updates.
Resources:
How to install Windows updates
6 If your model has nVidia graphics card then please check how high temperature this device possesses under
Vista. In this way you will know is it works fine under Windows 7 also.
CHIPSET DRIVERS
Solution on COPROCESSOR with yellow exclamation mark ()
If you have Intel processor:
Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)
Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7)
If you have an AMD processor:
nVidia Chipset (Install and reboot before other drivers) here (Vista)
Important information for users with nVidia chipset!
If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.
GRAPHICS DRIVERS
Intel graphics:
Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)
nVidia Chart:
Important information!
If you have installed all the drivers for graphics card nVidia, then before you install either version, you will need
first of all to remove old drivers from your system. Check below how guide do (that's not standard
( uninstall process) :
How to remove drivers Windows system nVidia graphics.
Drivers:
nVidia GeForce 8400 M GS:
OPTION 1
267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.
OPTION 2
Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.
Note:
Don't forget to first uninstall previous graphics driver.
nVidia GeForce GO 6150 7150 M, 7200 M:
OPTION 1
First try installing the Vista drivers for your model.
Resources:
How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?
OPTION 2
If the drivers will not work so try modded drivers worm 195.81.
Note:
Don't forget to first uninstall previous graphics driver.
How to install Windows 7?
1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,
2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.
3 install and reboot.
OPTION 3
Last thing you can do is install graphic driver from Windows Update.
Note:
Don't forget to first uninstall previous graphics driver.
1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '
Windows Update '.
2in the left pane, click " check for updates " and then wait while Windows searches the latest updates
for your computer.
3select the " optional updates " and install from there only driver for your graphics card.
AUDIO DRIVERS
Conexant HD Audio
Use the Vista drivers for your model.
Resources:
How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?
MODEM DRIVERS
Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant
HP QUICK PLAY
HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)
Notes:
- It must be installed before HP Quick Launch Buttons.
- You have installed this software and it crashes when you use?
Uninstall your current version of HP QUICK PLAY and install what you had in Vista.
Resources:
Uninstall software in Windows 7
Uninstall or change a program in Windows 7
If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.
HP Quick Launch buttons
Solution on KEYBOARD FILTER with yellow exclamation mark ()
HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)
WIRELESS DRIVERS
Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)
Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)
Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)
HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)
Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.
Note:
How to install the Bluetooth driver?
Click on the link below:
How to install the driver Bluetooth HP Windows 7.
ETHERNET DRIVERS
Marvell Yukon 88E8039 Lan here (ver 10.70.5.3 for 32/64-bit Win7) only for models with Intel processor.
Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.
CARD READER
Solution on BASE SYSTEM DEVICE with yellow exclamation mark ()
Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)
TOUCHPAD DRIVER
Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)
Note:
Default is activated the scroll two - finger. If you want to use a finger to scroll, check out the link below:
How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.
Alps TouchPad
Install driver through Windows Update:
1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '
Windows Update '.
2in the left pane, click " check for updates " and then wait while Windows searches the latest updates
for your computer.
3select the " optional updates " and install from there only driver for Alps TouchPad.
ONLY IF YOUR MODEL: WEBCAM
CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)
Note:
If you have a problem with your webcam, check below links to HP documents:
Test a Webcam using your favorite Instant Messaging
3VRX (optional software)
on the screen the images and associated sounds that are displayed and heard when volume control
3VRX here (version 2.5 for 32/64-bit Win7)
Note:
Here is YouTube video that shows what you can do with this software.
ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
1. uninstall all software and previous fingerprint reader drivers
Check below how guide (only it's non-standard uninstall process):
How do I uninstall the driver and the AuthenTec fingerprint software
2 you can install now correct fingeprint reader driver and software.
There are two apps that are available on this device:
- AuthenTec TrueSuite
and
-DigitalPersona Personal (recommended).
Information on how to install the software you will find below guides:
AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7
DigitalPersona Personal fingerprint AuthenTec and Windows 7
ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE
How can you check is your DVD with Lightscribe drive?
The Panel of DVD, there will be a Lightscribe logo.
LightScribe Host software here (ver 1.18.22.2 for 32/64-bit Win7)
Report of the changes that have been made in the guide
Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41
Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS (version 195.62)
Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host
Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.
Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software
Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1
Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)
Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in
Windows 7.
Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software
Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology
worm 9.6.0.1014
Graphic editing section of 31/03/2010 update nVidia with uninstall guide, updated drivers for nVidia GeForce 8400 M GS to worm 197.16
Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software
Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software
Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112
Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless
15.0.13.3 worm
Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2
Published 24/06/2010 updated published 14/12/2011 updated Intel® Rapid Storage Technology driver
Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1
Drivers added edited 04/01/2011 for nVidia GeForce 8400 M GS (ver. 267.76)
Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger
Scrolling in Synaptics TouchPad software.
Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology
Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install
Driver HP Bluetooth Windows 7
-
Inspiron 570 ultimate 'Uber' Upgrade Guide including Overclocking
After seeing several users asking for help on this topic and to lose contact with the users, I decided it's time to gather all the information and make it as enjoyable as possible. When the project is completed, I will state here duly filled (it will take me some time to put together it). For now, it is
WORK IN PROGRESS
Little warning first to users who still hold any type of guarantee for their Inspiron. Upgrade the HARD drive (HDD), RAM (memory) and the installation of video card would not void your warranty, PSU (Power Supply Unit) could be questionable. Dell does not generally recommend change CPU (processors) [as soon as you think about changing your motherboard, your PC is therefore more Dell, unless she card mother Dell from another model, but then it's Frankenstein, in this case you can get help in the forum of harware Tom, but not here], however I would like to present the list of tested processors Dell and there will be another 2 processors not tested by Dell. In addition, you can change the case of do your prettiest Inspiron or to improve cooling, I would say - it could void the warranty as well. Finally, at the end, I would like to talk about overclocking, it would be just not the cancellation of guarantees, it puts you at my mercy, because I'm the only one left who did this and always ready to help others, remember, as soon as you decide to go this way, you could a danger to PC - it might even ignite and burn your place , so basically you do so at your own risk. I'm thinking, if you overclock Inspiron 570 you agree with the above possibilities and would not hold the grudge (or hold responsible) against me or any other Member of this forum if you become homeless because of the fire caused by overclocking, LOL.
I'll start with the regions less invasive and easier to the more difficult and dangerous.
The guide consists of the following
Part 1. Upgrade of RAM.
Part 2. Video card update.
Part 3. POWER supply upgrade
Part 4. Upgrade the processor (CPU)
Part 5. Cooling of the processor and a general cooling in the original case.
Part 6. Cooling of the processor and a general cooling in the larger case.
Part 7. Overclocking.
If I missed something I go back and fix it, I would try to keep it all in one thread. When I consider the complete Guide, then I would say.
First things first - information. All the Inspiron 570 manualand next page easy to download driver Driver download page not so easy.
Before asking questions, than I guess you read the corresponding manuals, so I must not explain, for example, how to open your case, well I hope you understand what I mean.
Part 1. Upgrade of RAM.
According to the manuals official Dell Inspiron 570 is limited to 8 GB memory 1333 MHz maximum, but it was found that 16 GB 1333 MHz is recognized, faster RAM would have slowed at 1333 MHz. So far, no one has complained that their RAM (manufacturers) were not recognized by Dell. In general, it is recommended to use Crucial, however, I used Corsair and have not noticed any problems. Also, try to avoid the large heat spreaders, especially if you intend to use the fan Tower configuration push - pull - push fan can block access to the nearest slots of RAM CPU cooler.
I would try to explain.
Unfortunately, this is the only photo where you can see the situation.
This is the pattern with the same color RAM code.
4 DIMM 1 - could probably be affected by large CPU Cooler
5 DIMM 2 - can be affected by the large CPU Cooler
6 DIMM 3 - will not be affected by the large CPU Cooler
7 DIMM 4 - will not be affected by the large CPU Cooler
This info is from the Manual
Recommended memory configuration
Model
One module
Two modules
Three modules
Four modules
570
DIMM4
DIMM4
DIMM3DIMM4
DIMM3
DIMM2DIMM4
DIMM3
DIMM2
DIMM1Part 2. Video card update.
If you know, our Inspiron has only 300 watt PSU, so without changing the highest supply updated Sapphire video card (recommend) 7750, or cheaper and somewhat less powerful version is 6670, for anything beyond what you should have to upgrade your power supply.
Some people have asked if the graphics card and RAM slots would be "intercept", the answer is no. However, to change or add RAM, video card must be removed to allow RAM Jack clamps open, this is approximate photo below, the maximum length of the map is approximately 12 inches or 30 cm, in this case video card would go under HARD drive so you should measure top set.
Watch you 2 SATA slots beside the Video card - they could be covered by the Vcard radiator, if this is the case you should use angle sata cables.
I realized that I did not cover a lot of cards video here. So a little more. "" As see you I placed 550 MSI TI Cyclone OC for its unique cooling ability, this map is very large, but short, measurements are "x (H)" x (W) (L) ', 8.27 "x 5.51" x 1.38 ". I'll add more cards here as users will report.
XFX Double D FX - 787 a SADC Radeon HD 7870 GHz Edition 2 GB 256 - bit GDDR5 PCI Express 3.0 x 16 HDCP Ready CrossFireX Support video card 9.5 "x 4.4" x 1.5 ". "
Part 3. Update on power supply.
This is a general guide for power supply recommended by MSI, I would add at least 50 watt to your final decision, however more better, some say 100 watts is very good idea, argues here. Any standard power supply fits inside (it may be little required some metal parts of the case folding, but nothing major). Just make sure that a new block of POWER 24 pin or 20 + 4 pin, MOBO (motherboard) main power connector plus 4 connector pins supply assistants, 4 cables SATA power and at least a 6-pin PSU video card. It may be modular or not. Modular are much more expensive, regular, you'd have to improvise cables underground of the road maintenance.
Here are some pictures of the regular POWER supply, so you see that cable management can be a headache.
To my knowledge the factory recommended PSU is XFX, OCZ, Seasonic, Enermax and Corsair, I see so many complains of Thermaltake and Antec. Store brands and surprisingly cheap PSU should be avoided if you want stability and assurance that nothing will burn or power supply will last long with the same characteristics over time.
Then, I used extreme PSU calculator to show that our standard power can support 7750 and Phenom 965 together, no PSU upgrade needed, if no overclock.
Type of system: 1 physical CPU Motherboard: Regular - Desktop CPU Socket: Socket AM3 CPU: AMD Phenom II X 4 965 3400 MHz Deneb C3 Use of CPU utilization (TDP): 90% TDP RAM: 2 sticks DDR2 SDRAM Video card 1: AMD Radeon HD 7750 Regular SATA: 2 hard drives DVD - RW / DVD + RW Drive: 1 disc USB: 4 devices Fans Regular: 2 92mm fans; LED: 1 fan 92mm; Keyboard and mouse: Yes The system load: 90% Minimum POWER supply power consumption: 252 watts Recommended power: 302 watts Inspiron 570 stock PSU is 300 watts and it is known that this number is somewhat underestimated, so 302 watt is okay. Now, the power supply was in my Inspiron 570 model was HIPRO HP-P3017F3, here are the specs for anyone to chew.
+ 5V = 22 a, + 12 v = 5V aux, 18 a, + 3.3V = 17 a = 2A, - 12V = 0. 8A; Special comment "+ 5V and + 3.3V do MUST NOT EXCEED 160 W.
If you need a replacement, you can get it here again for $ 38. Not exactly the same, but very similar.
TyswhatCan I overclock the AMD Athlon II X 2 250 processor with the motherboard stock stock? Or it doesn't work?
Only the Black Edition processors, unfortunately (already). Yours is not the case.
-
Upgrade Guide vWorkspace 8.0
Hi all
Is there a guide for this? I can only find information on the upgrade 7.0 and 7.2?
Thank you
Hello
Indeed, there is a guide on the Support site, currently under the recommended content section. Here is a link direct https://support.quest.com/SolutionDetail.aspx?id=SOL106284&pr=vWorkspace
It may be useful
David
-
Hello. I'm upgrading our current infra (hosts/Essential licensing Vcenter / 3 ESXi 4.1). vCenter Server has been upgraded OK, so I started to esxi upgrade hosts one by one.
Upgrade process is OK, but after the reboot, upgrade marked as "not responding" in vsphere client server. I could ping this host and connect via ssh.
When you try to reconnect the client host, got a strange error "this edition of vCenter only supports 3 host (s) in the inventory. After 3-4 hours of nothing to host
has begun to show ok. After upgrading a second host, the same situation. I don't understand, how to solve it without waiting for another 4 hours.
Restart of host management agents does not help.
I remember I have a similar situation in the past where the number of licenses does not update as expected, i.e. required some time. What helped was to restart the server vCenter Server in my case. Maybe worth a try!
André
-
I'm looking to upgrade vCenter Server Application 5.1 to 5.5 and I have a few questions:
Y would there be a way to migrate the current settings of my instance 5.1 to 5.5 new one?
-Can I use the appliance of vCenter 5.5 5.1 ESXi?
-Manage vCenter 5.5 5.1 ESXi hosts?
Thank you!
-John
Y would there be a way to migrate the current settings of my instance 5.1 to 5.5 new one?
Rep. : Please go through the KB: VMware KB: upgrading vCenter Server Appliance 5.0.x/5.1 to 5.5
-Can I use the appliance of vCenter 5.5 5.1 ESXi?
Rep. : Yes, you can.
-Manage vCenter 5.5 5.1 ESXi hosts?
Rep. : You can manage vCenter 5.5 5.1 ESXi hosts
-vChinna
Maybe you are looking for
-
TOSHIBA 32AV933G loses control of channel list
Hi, I bought this TV 3 months ago and I have a problem with SORTING CHANNEL function. After reorganization channel as a result of my personal list (I use the same order with all my TV) the av933g has lost the order without apparent reason, forcing me
-
my wireless connection on my laptop keeps cutting out
I have a Sony Vaio netbook and the work of wireless internet very well. But it keeps disconnecting randomly as if he loses the connection and then wins connection again after about a minute. I have AVG anti-virus software and accelerator AVG, this co
-
ISI t possible to use several screws with state diagram module
Hello I'm doing a request using the module state diagram, and I have to use at least for VI I developed. I have problems when I want to set the entries before creating different States. My VI have stop buttons and the e/s I need to use. I have the sa
-
I forgot the password for wifi
I'm getting together to the top of my smartphone and I need my wifi password and I forgot. I have xp
-
Walkman / music app not canned music downloaded information
Every time I have download and replace the default music news in my music application, after a while the data gets revenues to the default. My device is currently on the pacifier, Kitkat was the problem too heal