Upgrade Guide vWorkspace 8.0

Similar Questions

• Discover 5.3 on Horizon 6.0 Upgrade Guide

  Is their a guide to upgrade again for shooting up to the Horizon 6.0 5.3?

  HI amurrey

  Wait for the 6.0 GA Horizon, upgrade guide is normally available on the Horizon view documents here: VMware Horizon view documents

  Thank you

  Bayu

• Fonts needed to upgrade guide?

  I'm reading the 4.0 to 4.1 upgrade guide, but the PDF guard bombardment with 135 error, which indicates he calls fonts that are not found. Anyone know what fonts are required to read this PDF file?

  HM... you use google chrome to read the pdf "inline", perhaps?  I have the same problem, but if I save slot, Acrobat Reader works fine... Maybe need a glitch in the browser.

• Windows 7 Upgrade Guide for dv6000/dv9000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models are not officially supported

  with Windows 7.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5 users with nVidia graphics card should check the temperature of this device before upgrading.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  How do you know what model you have and the specifications for it:

  1. click on the Support & drivers link. (The upper part of this page).

  2. in the search box, type your computer laptop product (p/n) number.

  Resources:

  How to locate the laptop n/p

  3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).

  4. on the same page, click on Product Information -> specifications and you will find all the information on

  your little laptop.

  How to install Windows 7 and what you need to know during the upgrade:

  1 guide: How to do a clean Windows 7 install

  2. all drivers for Windows 7, you will find in the next post below.

  3. some drivers have comment while they are initially made for Vista system.

  During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,

  Windows Vista Service Pack 1 and Windows Vista Service Pack 2).

  Resources:

  Make older programs in this version of Windows

  How to run a program in Compatibility Mode in Windows 7

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):

  nVidia Chipset (Install and reboot before other drivers) here   (Vista) 

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then until you install the other version will be

  you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller

  ( process):

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  Realtek HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).

  "" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  
  
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS

  worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Windows 7 Upgrade Guide for dv2000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models do not have their support

  with Windows 7 system.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers for Vista and preinstalled by HP software for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5. users with AMD processors have indicated that their models dv2000 were very quickly overheated after installation

  Windows 7. So if you want to install this system and you have this processor to remember about this and be hypersensitive

  on this issue.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  CherylG (one of the best HP forum contributors who has model dv2000) has solved this problem by installing Windows

  Updates.

  Resources:

  How to install Windows updates

  6 If your model has nVidia graphics card then please check how high temperature this device possesses under

  Vista. In this way you will know is it works fine under Windows 7 also.

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then before you install either version, you will need

  first of all to remove old drivers from your system. Check below how guide do (that's not standard

  ( uninstall process) :

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 7150 M, 7200 M:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  Marvell Yukon 88E8039 Lan here (ver 10.70.5.3 for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use a finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  Alps TouchPad

  Install driver through Windows Update:

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for Alps TouchPad.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software here (ver 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Graphic editing section of 31/03/2010 update nVidia with uninstall guide, updated drivers for nVidia GeForce 8400 M GS to worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Published 24/06/2010 updated published 14/12/2011 updated Intel® Rapid Storage Technology driver

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Drivers added edited 04/01/2011 for nVidia GeForce 8400 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Inspiron 570 ultimate 'Uber' Upgrade Guide including Overclocking

  After seeing several users asking for help on this topic and to lose contact with the users, I decided it's time to gather all the information and make it as enjoyable as possible. When the project is completed, I will state here duly filled (it will take me some time to put together it). For now, it is

  WORK IN PROGRESS

  Little warning first to users who still hold any type of guarantee for their Inspiron. Upgrade the HARD drive (HDD), RAM (memory) and the installation of video card would not void your warranty, PSU (Power Supply Unit) could be questionable. Dell does not generally recommend change CPU (processors) [as soon as you think about changing your motherboard, your PC is therefore more Dell, unless she card mother Dell from another model, but then it's Frankenstein, in this case you can get help in the forum of harware Tom, but not here], however I would like to present the list of tested processors Dell and there will be another 2 processors not tested by Dell. In addition, you can change the case of do your prettiest Inspiron or to improve cooling, I would say - it could void the warranty as well. Finally, at the end, I would like to talk about overclocking, it would be just not the cancellation of guarantees, it puts you at my mercy, because I'm the only one left who did this and always ready to help others, remember, as soon as you decide to go this way, you could a danger to PC - it might even ignite and burn your place , so basically you do so at your own risk. I'm thinking, if you overclock Inspiron 570 you agree with the above possibilities and would not hold the grudge (or hold responsible) against me or any other Member of this forum if you become homeless because of the fire caused by overclocking, LOL.

  I'll start with the regions less invasive and easier to the more difficult and dangerous.

  The guide consists of the following

  Part 1. Upgrade of RAM.

  Part 2. Video card update.

  Part 3. POWER supply upgrade

  Part 4. Upgrade the processor (CPU)

  Part 5. Cooling of the processor and a general cooling in the original case.

  Part 6. Cooling of the processor and a general cooling in the larger case.

  Part 7. Overclocking.

  If I missed something I go back and fix it, I would try to keep it all in one thread. When I consider the complete Guide, then I would say.

  First things first - information. All the Inspiron 570 manualand next page easy to download driver Driver download page not so easy.

  Before asking questions, than I guess you read the corresponding manuals, so I must not explain, for example, how to open your case, well I hope you understand what I mean.

  Part 1. Upgrade of RAM.

  According to the manuals official Dell Inspiron 570 is limited to 8 GB memory 1333 MHz maximum, but it was found that 16 GB 1333 MHz is recognized, faster RAM would have slowed at 1333 MHz. So far, no one has complained that their RAM (manufacturers) were not recognized by Dell. In general, it is recommended to use Crucial, however, I used Corsair and have not noticed any problems. Also, try to avoid the large heat spreaders, especially if you intend to use the fan Tower configuration push - pull - push fan can block access to the nearest slots of RAM CPU cooler.

  I would try to explain.

  Unfortunately, this is the only photo where you can see the situation.

  

  This is the pattern with the same color RAM code.

  

  4 DIMM 1 - could probably be affected by large CPU Cooler

  5 DIMM 2 - can be affected by the large CPU Cooler

  6 DIMM 3 - will not be affected by the large CPU Cooler

  7 DIMM 4 - will not be affected by the large CPU Cooler

  This info is from the Manual

  Recommended memory configuration

  Model	One module	Two modules	Three modules	Four modules
  570	DIMM4	DIMM4 DIMM3	DIMM4 DIMM3 DIMM2	DIMM4 DIMM3 DIMM2 DIMM1

  Part 2. Video card update.

  If you know, our Inspiron has only 300 watt PSU, so without changing the highest supply updated Sapphire video card (recommend) 7750, or cheaper and somewhat less powerful version is 6670, for anything beyond what you should have to upgrade your power supply.

  Some people have asked if the graphics card and RAM slots would be "intercept", the answer is no. However, to change or add RAM, video card must be removed to allow RAM Jack clamps open, this is approximate photo below, the maximum length of the map is approximately 12 inches or 30 cm, in this case video card would go under HARD drive so you should measure top set.

  

  Watch you 2 SATA slots beside the Video card - they could be covered by the Vcard radiator, if this is the case you should use angle sata cables.

  

  I realized that I did not cover a lot of cards video here. So a little more. "" As see you I placed 550 MSI TI Cyclone OC for its unique cooling ability, this map is very large, but short, measurements are "x (H)" x (W) (L) ', 8.27 "x 5.51" x 1.38 ". I'll add more cards here as users will report.

  XFX Double D FX - 787 a SADC Radeon HD 7870 GHz Edition 2 GB 256 - bit GDDR5 PCI Express 3.0 x 16 HDCP Ready CrossFireX Support video card 9.5 "x 4.4" x 1.5 ". "

  Part 3. Update on power supply.

  This is a general guide for power supply recommended by MSI, I would add at least 50 watt to your final decision, however more better, some say 100 watts is very good idea, argues here. Any standard power supply fits inside (it may be little required some metal parts of the case folding, but nothing major). Just make sure that a new block of POWER 24 pin or 20 + 4 pin, MOBO (motherboard) main power connector plus 4 connector pins supply assistants, 4 cables SATA power and at least a 6-pin PSU video card. It may be modular or not. Modular are much more expensive, regular, you'd have to improvise cables underground of the road maintenance.

  Here are some pictures of the regular POWER supply, so you see that cable management can be a headache.

  

  

  To my knowledge the factory recommended PSU is XFX, OCZ, Seasonic, Enermax and Corsair, I see so many complains of Thermaltake and Antec. Store brands and surprisingly cheap PSU should be avoided if you want stability and assurance that nothing will burn or power supply will last long with the same characteristics over time.

  Then, I used extreme PSU calculator to show that our standard power can support 7750 and Phenom 965 together, no PSU upgrade needed, if no overclock.

  Type of system:		1 physical CPU
  Motherboard:		Regular - Desktop
  CPU Socket:		Socket AM3
  CPU:		AMD Phenom II X 4 965 3400 MHz Deneb C3
  Use of CPU utilization (TDP):		90% TDP
  RAM:		2 sticks DDR2 SDRAM

  Video card 1:		AMD Radeon HD 7750
  Regular SATA:		2 hard drives

  DVD - RW / DVD + RW Drive:		1 disc

  USB:		4 devices

  Fans
  Regular:		2 92mm fans;
  LED:		1 fan 92mm;

  Keyboard and mouse:		Yes
  The system load:		90%
  Minimum POWER supply power consumption:		252 watts
  Recommended power:		302 watts

  Inspiron 570 stock PSU is 300 watts and it is known that this number is somewhat underestimated, so 302 watt is okay. Now, the power supply was in my Inspiron 570 model was HIPRO HP-P3017F3, here are the specs for anyone to chew.

  + 5V = 22 a, + 12 v = 5V aux, 18 a, + 3.3V = 17 a = 2A, - 12V = 0. 8A; Special comment "+ 5V and + 3.3V do MUST NOT EXCEED 160 W.

  If you need a replacement, you can get it here again for $ 38. Not exactly the same, but very similar.

  Tyswhat

  Can I overclock the AMD Athlon II X 2 250 processor with the motherboard stock stock? Or it doesn't work?

  Only the Black Edition processors, unfortunately (already). Yours is not the case.

• vSphere Upgrade Guide 5.1?

  Given that vSphere 5.1 has been officially released, is there a guide to upgrade?

  I'm looking not for anything extremely detailed... I have just a (standalone) 5.0 development ESXi host I want to upgrade to 5.1 and I do not know the steps I have to follow...

  All documents related to vSpher 5.1 can be found here

  I did the upgrade by using the ISO earlier in the day and it was pretty simple.

  Load ISO and reboot the host and follow the menus screen on.

  When he asks him below, select the appropriate and go ahead

  Upgrade to ESXi, preserve the VMFS datastore
  Install ESXi, preserve the VMFS datastore
  Install ESXi, crush VMFS datastore

• vCenter CapacityIQ Upgrade Guide

  all can share me the guide vCenter CapacityIQ 1.0 to 1.5.1 upgrade?

  How to extend the end of operating system of the virtual machine disk space linux. ?

  Please specify what exactly you want to increase, if the procedure described in the link I posted above is not what you are looking for can.

  André

• Upgrade question vWorkspace 8.0 license

  Hello

  We need to renew our vWorkspace 7.6 license will that be worth to 8.0 as well?

  Thank you

  Markus

  Hello

  Yes, 7.6 license file works fine with 8.0 too.

  Thank you, Andrew.

• 6.1.2 upgrade guide

  Hello

  Can someone tell me if this a doc exist for upgrading 6.0 to 6.1.2?

  I find nothing when I search the forums or on the tech site.

  http://documents.software.Dell.com/identity%20Manager/

  Thank you

  Lucius Rigunay

  I received a quick Jeff Xu doc I think this will do.

  Thank you Jeffery!

  Lucius

• Dynadock U3.0 can't connect 2 monitors after upgrade to Windows 10

  Dynadock U3.0 PA3927U-1PRP

  I used this dynadock to connect 2 external monitors, HMI and VGA (adapter w/DVI) to my laptop HP spectrum x 360.
  After the upgrade of windows 8.1 for windows 10, the system cannot recognize the external monitor 2 simultaneously.

  If I connect the Hdmi monitor, does not recognize the Vga (dvi) monitor. If I disconnect the Hdmi monitor it recognizes the Vga (dvi) monitor.
  I uninstalled the current displaylink software and installed the latest version: 7.9.421.0 (ver.dated 2015-08-03) and the problem persists.

  Thanks for your help.
  Concerning

  Julio.

  In General, you should pass the DisplayLink USB Graphics Software for Windows 10... the latest version of the software currently seems to be version 7.9 M0 Date: July 24, 2015
  http://www.DisplayLink.com/downloads/downloads.php

  I also found interesting page published by Displaylink on Win 10 known issues:
  http://support.DisplayLink.com/knowl...rticles/525125

  and here is the self-training software installation / upgrade guide:
  http://support.DisplayLink.com/knowl...lation-upgrade

  and here you can find instructions how to completely uninstall the old software DisplayLink on Windows
  http://support.DisplayLink.com/knowl...rticles/533821

  Check it out and please provide feedback

• Error Windows 8 not installed - upgraded Satellite C855 PSKCCE question

  Hello, I tried to update from Windows 7 to Windows 8. I followed all the instructions to remove all applications were asked, but, unfortunately, I received an error message from Windows 8 (Windows 8 not installed).

  My computer is a C855 (PSKCCE) I saw it cared about the Toshiba product for the upgrade list.
  Is something special to do (for example, remove antivirus or other specials) before the upgrade?

  Do you have any suggestions?

  Hello

  Please go through unique documents to win 8:

  * Windows 8 Upgrade - Notes and Restrictions *.
  http://APS2.toshiba-tro.de/KB0/TSB2A03EL0000R02.htm

  * Windows 8 upgrade guide *.
  http://APS2.toshiba-tro.de/KB0/TSB2A03EJ0001R01.htm

  This document describes the installation of upgrade from Windows 7 to Windows 8.
  http://APS2.toshiba-tro.de/KB0/TSB2A03ER0000R01.htm

• 23 - R115a HP all-in-one: looking for RAM upgrade HP 23-r115a video

  Hello

  I'm trying to find a video guide for disassembly of the HP 23-R115a, for the purpose of upgrading RAM.

  I tried HERE, but does not have the info I'm looking for.

  I couldn't have managed to find what whether on YouTube or the other. Your help would be appreciated.

  TIA.

  Hello @AeroGEL,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem, find a guide to upgrading the memory Modules and tried to help you!

  You can try to see the following guide: maintenance and Upgrade Guide (Page 15).

  In addition, the video here can help: OPEN ME UP! HP Pavilion 23 disassembly

  (Not a HP website supported).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Satellite A300 - question post Windows 7 upgrade

  G ' Day all,

  I made 2 posts to Microsoft Discussion groups:

  * Post 1: *.
  G ' Day all,

  Installed two systems (networked) from Vista to Win 7 HP (32 bit).
  Problems minors network/homegroup - all resolved.

  Desktop computer - fine.

  Laptop -?
  Toshiba Satellite 300.

  "After reboot, any connection displays dialog" Options of Performance "-no pagefile."
  A/c administrator can change (Managed/auto/manual) - "Restart required".
  as expected.

  GoTo previous paragraph (loop).

  Do you want?

  Kind regards
  Pat Garard
  Melbourne, Australia

  * The Terminal 2 (auto answer): *.
  For those who might follow...

  The solution can be found at:
  http://social.technet.Microsoft.com/forums/en/w7itproperf/thread/ec146153-6439-4d09-be00-1798990e6d2f

  > Run the following from a high CMD prompt:
  > sc config start = disabled afs
  >
  > (Note that the syntax of the command is very special -
  (> there is no space before the =, but there is an after)
  >
  > Then restart.
  .....
  > To start a high CMD prompt, click the round of departure,
  > type cmd.exe {in the bottom search box that has focus},.
  > in the list right click on CMD.exe, then choose 'run as administrator '.

  SFA - SEEMS to BE a distributed network file system...

  It would be wonderful if someone knowledgeable could clarify this...
  ... how it came to be on a Toshiba laptop...
  ... Would be - this 'SQL Server Active Directory Helper"(the only difference
  between the desktop and laptop)? ...
  ... Why is it a problem? ...
  the solution isn't a problem which not has not yet manifested? ...
  ... and his impliications!

  Kind regards
  Pat Garard
  Melbourne, Australia

  Is there an explanation of "Toshiba"?

  Hi mate

  First of all, it seems that it of not clear to you that it is a user to user forum
  You can start a discussion with users of common Toshiba laptops

  Return to your ad;
  To be honest it of not clear to me that you are talking about or what the problem

  You are trying to update Vista to Win 7?
  Well, please note that there are some applications which could not be supported by Win 7!

  Maybe you should take a look here:

  + Windows 7 upgrade: step by step Upgrade Guide +.
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R02.htm

  + Windows 7 upgrade: Notes and Restrictions +.
  http://APS2.toshiba-tro.de/KB0/TSB9A02PE0000R01.htm

  Check it! Perhaps, it might be useful.

• What is the correct recovery process once upgraded to Windows 10? (No OneKey Recovery)

  I have a cell phone Z50-70 which is preinstalled with Windows 8.1. It is an OEM version, with the product key that is stored in the Bios. This is an installation of UEFI.

  The vehicle currently has OneKey recovery installed, which, if I understand well (I've not used actually still), allows you to recover from a hard disk recovery partition. This is not a "fresh" Windows 8.1, but an image provided by Lenovo that take back you to the State the laptop was bought originally (will have all software Lenovo and preinstalled drivers).

  According to the official upgrade guide Lenovo, before performing the upgrade of Windows 10, we should uninstall basically all software from Lenovo, including OneKey recovery and it won't work in Windows 10.

  Issues related to the:

  1. What is the correct process to recover the system from Windows 10 if something goes wrong? I think that Windows 10 integrates a feature "Reboot your computer" in the settings which I suppose is what we are supposed to use. It would take me to:

  a. a completely new install Windows 10?

  b. a created image during the upgrade from 8.1 to 10, containing all my files etc. when performing the upgrade?

  c. or he would use the recovery partition from Lenovo (which would have used OneKey Recovery if it was compatible) and take me back to 8.1 for Windows?

  (d) another thing?

  2. once I did the upgrade and Windows 10 has successfully activated, I think I could create a bootable with ISO of Windows 10, inside boot media and install a completely new install of Windows 10 and activate it. Theoretically, I could make as many fresh installs from the boot media I want, as long as initially, I did the upgrade (not a clean install), and the hardware of the laptop does not change. Is this correct?

  2A. If, therefore, during the first boot media clean installation process, I'd be sure compeletly remove the Lenovo recovery partition entirely and go from there, rely on 'Reset your PC' feature of Windows 10? Could I could use even just reinstall Windows boot again media 10 as a way to recover? If I understand correctly, it is not absurd to keep recovery partition it if it can not be used within Windows 10.

  I think I had a desktop PC ordinary with a retail version of Windows, then everything above would be fine. The complications added here are that 1. I have no product key Windows 8.1 (alll is managed by the BIOS) and 2. I have no recovery disk. I want to make sure that I understand everything completely before moving, and potentially do a clean installation using bootable media, so that I don't end up ruin something and end up with either a laptop I can not recover, a Windows installation that is not enabled.

  Thank you.

  Update for anyone of another reading:

  I just uninstall OneKey recovery on my installation of Windows 8.1 for the upgrade. While Windows is concerned, OneKey Recovery has been completely removed.

  The good news is that I then shut down the laptop, you press the novo button, selected "System Recovery" and I was always greeted with OneKey recovery program where I could choose to restore from original image, or a custom image. So I guess that once I have upgraded to Windows 10, I'll always have the option to restore to the factory Windows 8.1 if I ever need/want to.

  The confusion seems to be that OneKey recovery software is actually two separate software:

  1 OneKey Recovery #1 is installed in the hidden recovery partition which is responsible to perform a system restore from the image of your choice - either the image of plant or a custom image created by #2 OneKey recovery software. OneKey Recovery Software #1 is still accessible via the Novo button.

  2 OneKey Recovery #2 is installed on the Windows 8.1 installation, which is responsible for the creation of custom system images. You can also choose to restore the system from here, but AFAIK, it just restarts the computer and OneKey #1 software, which allows you to recover expenses. OneKey Recovery #2 is the software Lenovo told us to uninstall it before Windows 10. However, uninstalling OneKey Recovery #2 let software OneKey Recovery tact #1.

  As far as I know, this means that the uninstall OneKey Recovery #2 mean that we lose the ability to create custom system images, but we reserve the option to restore from a system image.

  Can anyone confirm that I understood, and that what I said above is indeed the case?

  I'm still a little uncertain about what Windows built tens in the willingness to ' PC ' do well - that it will use the Lenovo recovery partition or run a 10 Windows Installer Clean up.