VCenter converter error "host key < ip > cannot be found."

Similar Questions

• Converter error "host key < ip > cannot be recovered.

  Hi all

  I'm having a problem using the stand-alone converter to p2v a machine linux (CentOS).  It is 1% and then fails with the following error:

  FAILED: A general error occurred:
  

  Network error. 10.0.2.19 host key cannot be recovered. (code 2 back)

  
  

  (Note: 10.0.2.19 is the IP address of the CentOS box.)

  
  

  Running 5.01 build 1087880 of the converter (latest in today ' hui) and ESXi 5.1.
  

  
  

  Someone at - he never encountered this error before or know what that means?  Google is not very useful...

  
  

  Thanks in advance,

  Colin
  

  Yes... a bit embarrassing, but on the machine to virtualize, /etc/hosts.allow and /etc/hosts.deny are configured to deny access to the subnet as my ESXi server is on.  After fixing these files and confirming that I can ssh to the machine of my subnet of virtualization, I get this error.

  Hope that helps!

• When I try to open my email on my new desktop, an error window tells me my host server POP3 cannot be found.

  My laptop receives by e-mail very well. Windows confiures my wireless network settings. Problem: when I try to open my email on my new desktop PC , an error window tells me my host server POP3 cannot be found. I have tried everything; network connections, Internet options; etc. I get connection otherwise for the internet Google, Facebook, online banking, but not to my email. I entered my full POP and SMTP addresses, but they are lost for my internet connection LAN, which is automatically set to be managed by Intel. I tried to reconfigure it and tried to find Windows wireless network settings. On my laptop if I lose the connection he asks me if I want Windows to manage my connection. And it does!  Help! I really want to be able to find the network Windows wireless.

  original title: NETWORK WITHOUT WIRE WINDOWS

  Hello

  If you use the internet OK for other things, the problem with Outlook Express (e-mail client).

  Check your server settings and out against your ISP help pages. I've seen cox help pages that involve your incoming server should be pop.east.cox.net (note the absence of the number 3 after pop). The outgoing server may be smtp.cox.net or maybe smtp.east.cox.net.

  Tricky

• Error message: the file cannot be found and cannot attach an Autocad drawing to a Windows Mail message

  Original title: I can't fix an Autocad drawing to a Windows Mail message.

  I can reach everything. He pointed out that the files cannot be found.

  Hi JerryHunt,

  1. when the files located?

  2 are you able to attach this file in other emails?

  3. How do you attach the file? Are you trying to drag-and - drop?

  You can try through the interface and try to drag and drop the file.

  You can also try to change the location to save the file. You can save to a different location and also save by using a different file name. Try to attach the file in Windows mail, then check if it works.

  Hope this information is useful.

• error message - specific module cannot be found.

  This error message keeps popping up. How can I get rid of him?

  There is a problem starting C:\Users\Charlie\AppData\Local\Arcade~1\AgHelp.dll the specific module could not be found.

  The Autoruns program worked. I had to use the filter and the search for this. File DLL 4 times, before finally going permanently...

  Thanks for the quick answer to this problem.

  Larry

• Export error records 'diagnosis package cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Hey, gentlemen!

  Trying to export logs from VMware vCenter Converter Standalone v 5.5.2 and this error occurs.

  "The package of diagnosis cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Can he save data to the file journal, but only coverter_gui newspapers, nothing else.

  Google search returns no results at all.

  What could be?

  OK, it is resolved after you restart the converter Services.

• Cannot complete the installation of the agent vCenter Converter on server %. Error code 1 603

  I have attemptred to convert a Server Windows 2000 Server SP4 on a server of VMware ESXi 4.1.

  I started the process of a PC Windows XP running VMware converter-all-4.3.0 - 292238 and I got the error "could not complete the installation of the agent vCenter Converter on server %. Error 1 603 "code.

  Read in the forums, it seems that the correct version of VMware Converter Standalone is up to 4.1: is this correct?

  To solve the problem, I installed VMware converter standalone 3.x on Windows 2000 box, but I don't think it's the best choice.

  Can someone please help understandiong what is the proper way to convert a Windows 2000 Server?

  Concerning

  Marius

  Faced with the same problem.

  Solution: manually install the agent of vmware converter on the machine that you want to convert. Choose install Cusotm and only install the agent (client or server)

  See you soon

  Swap

• the host key fingerprint verification failed when converting to a linux machine

  I use the 6.0.0 converter to convert a machine physics linux vm. I get the following error repeatedly. He is always stopped at 3% after 3 minutes

  MSG = "a general error has occurred: # XYZ.mit.edu SSH - 1, 99 - OpenSSH_4.3.

  -> # SSH-1 XYZ.mit.edu, 99 - OpenSSH_4.3

  -> # SSH-1 XYZ.mit.edu, 99 - OpenSSH_4.3

  -> The authenticity of the host that XYZ.mit.edu cannot be established. Welcome to the fingerprint of the key xx:xx:xx:xx:c7:5f:23:34:d7:2 c: 79:7e:77:92:3e:e6 verification failed.

  '--> (return code 1).

  I have spent many hours on this but could not understand it. I tried a Linux physical different and got the same error. I have no problem connecting to the physical machine XYZ.mit.edu outside the converter. The converter contains plink program under C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone, I can run plink for the physical server XYZ.mit.edu to store the fingerprint in the cache and it connects fine.

  I have no idea whence the SSH-1, 99 - OpenSSH_4.3 in the error message. The physical server XYZ.mit.edu will OpenSSH_5.3p1. Here is the/etc/ssh/sshd_config on the physical server entry

  
  

  # cat sshd_config | grep - v #.

  Protocol 2

  SyslogFacility AUTHPRIV

  PasswordAuthentication yes

  ChallengeResponseAuthentication no

  GSSAPIAuthentication Yes

  GSSAPICleanupCredentials Yes

  UsePAM Yes

  AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES

  AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT

  AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE

  AcceptEnv XMODIFIERS

  X11Forwarding yes

  MaxStartups 10

  Subsystem sftp/usr/libexec/openssh/sftp-server

  Anyone know how to bypass this error?

  Thank you very much!

  Hello

  It is possible that the help of the virtual machine cannot solve XYZ.mit.edu. You can try a ping of VM, another in the same VM to check network.

  If this is the case, use the IP address of the source computer.

  HTH

  Plamen

• Restore-error vCenter Converter Standalone / Server

  Hi guys,.

  It's my first post in the VMware community and I'm looking forward to many useful discussions. Back to my problem...

  I have a serious issue in our virtual environment. Last weekend, I had to restore a virtual machine to a backup vcb. My first idea was to import the machine with the vCenter Converter 4.1.0. So far so good... I chose the .vmx of the virtual machine, which lies directly on the hard disk server vCenter ( file://hostname/e $/vm/vm.vmxUNC path) connection references: domain\administrator (access rights are set correctly)

  After a few seconds, I get the error message: cannot open the file file://hostname/e $/vm/scsi0-0-0-vm.vmdk (the name of the file is of course correctly)... ok, now I'm going to started to sweat... not only for the reason that it was Sunday morning, no, the virtual machine is our production database, and I could not restore it O.o

  Okay, the next idea was to import the machine with the vCenter Converter standalone, that is installed on my workstation. Source type is again Image backup, machine virtual file is always on
  hostname/e$/VM/VM.vmx--... we'll press next... and what past? Error: agent.internal.fault.FileOpenError.summary... have I said already, that the virtual machine is our most important server?

  2 hours later, I finished the installation of the new database server that was not the way things, I want to do...

  Monday: I couldn't believe it, the backup is corrupt... so I copied the files on my local drive on my computer and tried again... what my eyes see? It work fine? Now, I really couldn't believe it... If files is located directly on the vCenter server, it does not work and if the files are on my computer, it works correctly?

  can anyone help my in this matter? I really have no explanation for such a mistake...

  Thanks in advance for your help

  was soon Andi

  PS: I'm sorry for my English, but it is not my native language

  lights,

  There is a KB on a topic like this:

  "DISKLIB-LINK:
  host\e$\vm\scsi0-0-0-VM.VMDK': cannot open (the file is too large).

  Conversion fails when the source or destination do not support large files

  http://KB.VMware.com/kb/1008633/

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• vCenter Converter: Installshield Error 1335 data1.cab P2V Wizard

  I'm installing vCenter Converter v4.3 (P2V) on a Windows XP SP3 computer.

  The installation process fails with:

  "Error 1335: Cabinet file data1.cab required for this installation is damaged and cannot be used.".

  This is an error of Installshield Wizard.

  I checked the Md5 of the file installation (VMware converter-all-4.3.0 - 292238.exe) and it is correct.

  I used a copy of the installer on another computer Windows XP SP3, and installed correctly.

  I tried the following unsuccesully, the same error occurs each time:

  1 / /Unregister and then/regserver MSIEXEC

  2 / deleted MSI. DLL, MSIEXEC. DLL, MSIHND. DLL and re-installed the latest Installer Microsoft MSI v4.5.

  3 / delete C:\Program Files\Common InstallShield

  4 / implemented a fix registry CAB file.

  5 / rebooted the PC in a minimum configuration (MSCONFIG to disable all services by default, no provision of the automatic launch at system startup, but)

  6. completely uninstalled antivirus, firewall

  7 / made sure the path of the destination folder is short (ex. C:\VMC)

  Any suggestions please let me know.

  Randy

  during extraction worked among other files, you should find an MSI - you can doubleclick as MSI

• Windows 2008 R2 VM disk system increased substantially after moving from VM to ESXi host 5.1 to 5.5 ESXi host using vCenter Converter Standalone

  Hello:

  I moved a Windows 2008 R2 VM from a 5.1 ESXi host to an ESXi host 5.5 using vCenter Converter Standalone.  The c: / drive system passed largely to where I now have to extend the volume.  Is this normal/expected behavior?  Perhaps the conversion/move creates temporary files I can delete?

  Thanks much for the ideas.

  This is not the expected behavior.

  Size of the disk is defined during the conversion and which will not increase by its own during conversion.

  Now, you need to V2V, if you want to reduce the volume.

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio

• Can't access file system host (MAC) shared in VMware vCenter Converter Standalone Client when wanting to create a VMware image (Windows 7 in Parallels virtual machine running on a MAC) for the option of machine Powered On.

  File HOST (Mac) system is currently shared in the Parallels virtual machine and is accessible through Windows Explorer and works correctly in the Virtual Machine environment, however, after installing vCenter Converter application on the Windows virtual machine these shared folders are not accessible from the conversion tool in the selection of the target destination of the file VMware (s). I can't select an existing folder on drive "C:" to write the image so that there is not enough space available for the VMware image and it must be written in a different file system, while the image is being created.

  Anyone know a way around it to show the target to write the image on the host (MAC OS) file system or is it a bug?

  Thanks for the reply.  It seems that the maps are not displayed if they were created as actions by the hosts.  When I created a mapping directly from Windows, then this mapping appeared and the conversion worked fine.

• Cannot install the vcenter converter plugin.

  Dear team,

  I m cannot install the vcenter converter plugin, need help how to do the necessary, following is the blink of an eye, this virtual machine is not connected on the internet.

  

  

  need help how to do the necessary.

  Concerning

  Mr. VMware

  VCenter Converter 4.2 is on the vCenter Server installation Image:

  https://my.VMware.com/de/group/VMware/details?DLG=vc41_de&baseCode=ZHcqYmRwZUBiZHdlag==

  After you have installed the vCenter Converter 4.2 on the vCenter Server server, you can install the plugin converter on your desktop inside the vSphere Client.

  Concerning

• vCenter Converter 4.1 - using an Acronis True Image 9.1 image file, error

  I posted this question in the wrong forum... I think so. So I'll post it here where I think is appropriate...

  http://communities.VMware.com/message/1662417#1662417

  I get the error message...

  "The machine virtual source is not recognized.

  I am using vCenter 4.1 standalone on a helper VM. I use Acronis True Image 9.1 to create the backup image, and he pointed out that image was created successfully. I restarted the server and creates a new image and I get the same thing. I created another image, do NOT use a shadow copy volume and the same thing. I created another image WITH shadow copy volume and the same thing.

  For a validation test, I created another image from another SQL Server and it works fine. For some reason any this particular SQL Server keeps giving me the same error.

  I'm backup of SQL server is an HP DL380 G3 physical and ESX ESX 3.5 U5 infrastructure if it means something... lol

  Any ideas?

  EDIT:

  FYI, the HP DL 380 SQL Server running Windows Server 2003 x 32 SP2

  UPDATE:

  I just upgraded to vCenter Converter 4.3 and now I get the following error message...

  "The source settings are invalid.

  So I did another test of consistency and tried to restore using Acronis and Acronis reads the file .tib without problem.

  restore the tib to a virtual machine created in the same way as you would with a real computer.
  Boot CD Acronis and load the tib of the network...

  During the creation of the new brand VM that yoy use buslogic scsi-controller.

  scsi0.virtualDev = "buslogic".

  When did race against the newly created - virtual computer converter specify the vmx file and use the option "set up the machine" of the converter