vCenter data recovery - is it upgrade for VCB

Similar Questions

• Unable to activate plugin vCenter data recovery

  I installed the plugin for vCenter Data Recovery and I went into the Pugins manage and it is listed as disabled. If I right click it nd select activate, nothing happens.  No error, but it does not either. Someone at - there experience this problem?

  -Daniel

  chiazynloo,

  Build numbers seem to be off - unlike the version numbers correct for Beta 2 or RC build recovery of data and vCenter Server 4.0 RC respectively.  Where did you got these bits?

• This allows backup, data recovery and AntiVirus Server

  Hello

  Am new to the CWC and I wanted to know if there is an option in the CWC to enable backup, Server data recovery and install Antivirus for commissioning a virtual machine of the CWC. It would really help if someone could share some links for the same or any document available to her.

  Thank you

  Anish

  Anish, don't know if this is related to your original question, but if I understand correctly, you want to know how to configure which models are available for users to order. This first through these images through CloudSync automated discovery. Then, the supplier (CPTA) uses the portlet to manage an Infrastructure of Cloud Computing for review 'Discovered' templates/images and mark them as "Registered" or "ignore". Only "Registered" models can be selected when ordering a virtual machine. "Registered" items can be removed temporarily from the selection by putting in "Maintenance" mode

• Restore backups of data to different vcenter server recovery

  Hello

  We have separated closed vCenter in our society in different places, I'm just starting to use Vmware Data Recovery instead of VCB for backups. Is it possible to restore the backup of Vmware Data Recovery of Virtual Machines to a different vCenter Server?

  If you can, you could point me to documentation that shows how?

  Thank you

  Glenn

  You can create another device VDR with the same data from disk (or NAS share).

  Then connect to this device (you can also use the VDR plugin when you are connected to a host, not only when you are connected to vCenter) and wait until it import the backup catalog.

  André

• Pavilion p6537c: Dead Win 7 C drive, should I go direct to 10 for a new disk? Ideas on data recovery?

  Question: Installing an operating system on the new replacement drive:

  750 GB hard drive on my Win 7 Home Premium desktop is completely dead. [See data recovery? below.] With regard to the new replacement unit 1 TB, I don't have recovery discs (my bad) and can get a USB bootable HP for $30 in 5 days.  But if I will Windows 10 in any case, would it not easier to simply direct that, assuming that I can download from the MS site?  Is this possible or do I have a valid Windows installed before 'upgrade '?  I have the serial number of windows etc. since it is a 64-bit licensed machine Win 7 legit bought new at HP.  There cpu: AMD Phenom II X 4 830 (D) 2.8 GHz and 6 Gig of RAM. Tips appreciated!

  DATA RECOVERY question: C drive would not start at all in a local computer store and they refer only to the people of data recovery. Any ideas how I could do this, or at least try, me? Otherwise, any suggestions on the most cost-effective way to get what I can (if any) out of the disc?  I don't have an idea as to why/how it has failed or the status of the Board at this point.

  Thank you very much!!

  Tommy

  From W10 v1511 that you do not have to enter a key when it is stored in the bios, W10 will find that during the installation, so you can just go right to the 10 and spend 8 installation.

  Even if it is not stored in the bios, you can enter a product key valid W7 orW8 during installation of W10 and he will accept it.

• VMware Data Recovery 2 in a vCenter Server

  Hi all

  I need a base backup of VMS backup solution. I know that each camera VDR is bounded to vCenter server, you might not use vcenter several with one camera VDR. But in a sense the opposite? I use several VDR devices with a vCenter server? I know about the limits of the VDR and probably I can achieve limit of 2 TB and only solution in this case use another camera VDR, but I don't know if it is possible to use more than a VDR with a vCenter.

  You can use up to 10 of VDR with a VirtualCenter.

  Look at the "VMware Data Recovery Administration Guide" on page 16:

  Special data recovery Compatibility Considerations:

  Ten aircraft recovery backup of data for each instance of vCenter server.

  Paul

• ESXi 4.1 + VMware Data Recovery 1.2 (without vCenter)

  Hello

  I installed VMware Data Recovery 1.2 on my ESXi 4.1 and when I connect to VMware Data Recovery I get the message "connected to the ESX Server, automatic backups will not be made.

  This means that scheduled backups only work if I receive vCenter? I without vCenter run backups manually?

  That is right. vDR is configured to discover your VM inventory via vCenter. The vDR is designed to provide a central interface for your VM backup/restore via vCenter.  The cool thing about this is that vDR keep track of your virtual machines if you transfer them via vMotion, HA, DRS, etc. But, Yes, you NEED vCenter.

  ___________________

  A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4

  If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.

• vCenter Standard and vSphere4 Enterprise Plus - data recovery device?

  Hello

  We currently have vCenter Standard with vSphere4 Enterprise more hosts multiple and if I check the functionality under license, we have available data recovery but I can't seem to find the device anywhere?  Can someone help me get started?  I need to install the device of the FVO and the plugin for my vCenter.  Thank you.

  Here: http://downloads.vmware.com/d/info/datacenter_downloads/vmware_vsphere_4/4

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• vCenter, ESX (3.5 & 4), data recovery

  The data recovery component can be added to an ESX 3.5 or 4.0 server?

  If Yes, what is the pn and the cost?

  ?:|

  You can add the data recovery for ESX 4.0 ratings (SKU: VS4-STD-C + SnS is required)

  But you also need to vCenter Server, cause of data recovery is integrated into this tool.

  André

• Can not find the plugin for data recovery?

  Hi guys,.

  I don't have the time to investigate this, but I was wondering if you can get started me.

  I installed vCenter4 and have only 1 host ESX 4 up to now (ESX4i).

  I attributed an enterprise of this machine license.

  I can't see the plugin for recovering data anywhere in my vCenter.

  What Miss me?

  I'm going through the documentation as we speak. Thank you

  
  
  Please consider my response as 'useful' or 'proper' marking

  Have you downloaded vDR from the download page where you went to get vCenter/ESX 4.0? Once installed, you will need to go to the Plug-ins and download/activate the plugin. This is at least the case for VCB, VUM, etc..

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• vCenter / Vsphere 4.0 data recovery

  I have to do a small infrastructure:

  n.2 vmware ESX vsphere 4.0

  n.1 iSCSI storage

  n.1 vcenter server.

  Can I use entire vmware vcenter server data recovery? I have an another iscsi storage to make backups.

  Best regards.

  Yes, vCenter vSphere 4.0 is required for vDR and will be necessary. Take a look at the comparison table of different editions: http://www.vmware.com/products/vsphere/buy/editions_comparison.html

  Most resembles the way forward or you can use advanced or higher if you need more features.

  You can also buy the vDR separately as a la carte in question, take a look at how to buy for vDR: http://www.vmware.com/products/data-recovery/buy.html

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Options of data recovery for crashed HARD drive

  My friend HARD drive gone bad. She has not saved. She has her thesis on it (any resemblance to characters from the fictional movie, living or dead, is coincidentalt. "It's true).

  I know there are options to recover the data. But I'm not familiar with all of them and how much they cost.

  One of her friends which is a network administrator, and continued his studies of masters in computer security will attempt to recover the data for it. I fear that it may just try to boot from a CD and try to read the data, which can worsen the damage.

  What other options does have?

  Thank you

  If it crashed, she may need data recovery specialists.

  These are some $$$.

  You can read this:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• for damaged or not data recovery software damaged a hard drive for windows that's easy to use and understand

  Hello

  I would like to know what data recovery tool is the best for professional use for deleted files, pictures ect.

  'more' to recover damaged hard drive data.    I'm looking so recovery tool for real data that is easy to use and understand who can recover all types of data from hard drive damaged or undamaged

  Thank you

  Johan

  Tuesday, January 14, 2014 15:20:06 + 0000, johan davidian wrote:

  I would like to know what data recovery tool is the best for professional use for deleted files, pictures ect.

  If you are talking about undelete programs, car brands, or
  anything else, which is better is a matter of taste. You will get different
  responses from different people.

  That said, I like http://www3.telus.net/mikebike/RESTORATION.html

  'more' to recover damaged hard drive data.    I'm looking so recovery tool for real data that is easy to use and understand who can recover all types of data from hard drive damaged or undamaged

  If you can recover data from a damaged disc depends on what the
  the damage. But in general you can not. In most cases, your only recourse
  is to bring or send the drive to a professional file recovery company.
  This kind of service is very expensive and may or may not work your
  case.

• Upgrade VMware Data Recovery

  An upgrade of potential of VMware Data Recovery from 1.2.x to 2.0 x?  I looked through the VDR documentation and there is no section on the upgrade.  I want to keep my existing backup definitions and data if possible.  Does anyone know if upgrade is possible and I have to start over again?  Please notify.

  The upgrade process and how to keep the existing backups is explained in the release to http://www.vmware.com/support/vdr/doc/vdr_200_releasenotes.html notes

  André

• Data recovery for backup ESX4

  I already do the backup to the LUN with 'Data Recovery '. Is it possible for me to complete the data in the LUN to the tape recorder. BTW, could someone tell me what the DR uses for backup? Is - this mode of SAN or NBD?

  Is it possible for me to complete the data in the LUN to the recorder

  In its current form, no.  IF you use a vmdk for the target of the VDR, you always have to copy this vmdk in tap somehow drive... There is no way to archive data still... I'm sure that VM ware is working on this, but seeing as how VDR is always 1.0... It could be a year or two before we see this mature at this point.

  Take the name, the more sinister than the backup.  This is an archive of the reserve, not long term.

  Is - this mode of SAN or NBD?

  Both.  I found out today that if you put a VDR in a datacenter, and your VM of in a different datacenter these backups will be the network.  If VDR is unable to access the vmdk he tries to backup, you will also get a network backup.

  HE reconfigures the VM, add the disk to the VM VDR and makes local, so that the data (add min scsi) local to the machine virtual and copied via the San, because it is mounted.  He's trying SAN first, then he resorts to the network.

  So I think you need to do so that the LUNS are visible on the ESX host where the VDR, so that it can correctly 'see' the VMs for SAN backup.