VCenter failed installation, some components not installed?

Similar Questions

• Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

  Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
  The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

  Hi Ben Dean,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

  To run the System File Checker, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  For more information, see the following Microsoft article:

  This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP - 15-ac600ur: some drivers not installed

  Hello

  Sorry for my English.

  Some drivers has not been installed correctly.

  Download all the drivers from the link:

  http://support.HP.com/ru-ru/drivers/selfservice/HP-15-AC100-notebook-PC-series/8499326/model/9728679...

  But when installing the chipset drivers get error: "this drivers not for this platform.

  Result, I have 2 unknown device:

  Controller PCI - PCI VEN_8086 & DEV_22DC & SUBSYS_80C5103C & REV_21
  Ethernet LAN - PCI\VEN_10EC & DEV_8136 & SUBSYS_80C5103C & REV_07

  Search for information by hp support messages.

  Find http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/pci/td-p/5504567

  On this subject, try install this driver

  https://Downloadcenter.Intel.com/download/24892/Intel-TXE-Intel-trusted-execution-engine-driver

  I'm install successfully, but unknown device already in the list.

  I try to download driwer for on official website of Realtek realtek ethernet card. The driver install successfully, but unknown device Realtek Etherne in list are...

  Can you help me?

  Thank you.

  p.s. I'm from Belarus, speaking Russian.

  Hello:

  See if these drivers work...

  PCI VEN_8086 & DEV_22DC

  http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71262.exe

  If the driver does not install, try to install manually from the device in Device Manager by navigating to the folder of the driver that was created when you ran the file.  The folder is located in C:\SWSetup\sp71262.  Make sure that the include subfolders is selected.

  Here's a partial copy and paste of the driver installation information file that shows support for the ID you have posted.

  Reference of the manufacturer]
  INTEL % = INTEL, NTamd64

  [INTEL. NTamd64]
  % PROCSNB. DeviceDesc % = DptfCpu, PCI VEN_8086 & DEV_0103
  % PROCIVB. DeviceDesc % = DptfCpu, PCI VEN_8086 & DEV_0153
  % PROCHSW. DeviceDesc % = DptfCpu, PCI VEN_8086 & DEV_0C03
  % PROCHSW. DeviceDesc % = DptfCpu, PCI VEN_8086 & DEV_0A03
  % PROCHSW. DeviceDesc % = DptfCpu, PCI VEN_8086 & DEV_0D03
  % PROCBDW. DeviceDesc % = DptfCpu, PCI VEN_8086 & DEV_1603
  % PROCSKL. DeviceDesc % = DptfCpu, PCI VEN_8086 & DEV_1903
  % PROCCHT. DeviceDesc % = DptfCpu, PCI VEN_8086 & DEV_22DC

  PCI\VEN_10EC & DEV_8136:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71268.exe

• cracked disk installation and does not install

  installation disk cracked and will not install what can I do

  What for installation disc?

  If it's a Microsoft product, please visit:

  http://support.microsoft.com/kb/326246 .

  If it is a non-Microsoft product test, contacting the producer of software for advice.

• get a windows installation error is not installed correctly during the installation of a 3rd - party in Windows Vista software

  I get an error message: windows install is not installed correctly during the installation of software 3 rd-party on Windows Vista Home Edition. Why I get this error and how to fix it?

  Hello

  I suggest you try the steps from the following link and see if that helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651#appliesTo

• generic installation program does not install the file oracle_common (or opatch)

  Using the generic installation program (weblogic 10.3.6), there is an error directly dialog box after email / security that says unable to connect - record and request URL of the proxy and port.  even with the proxy information in, do not access.  bypassing this translates the installation is without the oracle_common folder, so I can not install oracle adf via opatch.

  Has anyone seen cela or have information?  I use oracle linux 6.5

  Hello

  Oracle_common directory not created with the stand-alone installation of weblogic.

  It comes only with no facilities Fusion middleware product (for example, SOA, forms, IDM... etc)

  ADF is not installed via Opatch. It is installled via the YES program.

  One stop fixes are installed via opatch.

  Thank you

  Sharmela

• Some drivers not installed in XP on Satellite A200-1 g

  Hello
  I tried to install Win XP Prof after reading the forum and the experience of others. I was without success! Eventhough installed drivers of Toshiba d - download page, 3 things are always there disturbing:

  1. storage:
  It is said that system does not required of at least but it's an A200-GS 1, with good components for this, and also utility Chipset installed (ICH7M).

  2. network controller:
  In addition, I have installed all, blueth. Wireless, as well as the card network is it ok. This controller is what?

  3 unknown device! That I can't even guess what!

  Help, please!

  I wonder how did you install XP without Intel Matrix Storage Manager installation?  :|
  The IMSM is required to recognize the HARD drive!

  The Satellite A200-1 g is a part of the PSAECE series. Choose the right drivers on the Toshiba page!
  As next you must update the BIOS to version XP! The laptop has been pre-installed with Vista and the BIOS has not been configured for XP. Therefore, use the BIOS XP

  In addition, all drivers must be installed in the correct order! Please see instructions for installation on the pilot site of Toshiba!

  Last but not least the XP must be updated to the latest state! Install all available MS patches!
  Good luck

• KB952287 is a problem with the module installer and will not install, error code 800706BE

  Hi, I have a laptop Dell Inspiron 1520 with Vista Home Premium. I'm having problems installing SP1 and have identified that one KB952287 that causes the problem. The update causes exactly the same problem. While installing the update, an error message appears that says "Module of Windows Installer has stopped working and needs to close", then the updater freezes and never completed the update. The update log provides the following information.
  
  Fix for Windows (KB952287-french)

  Installation date:? 03 /? 04 /? 2009 20:06

  Installation status: failed

  Error details: Code 800706BE

  Update type: Important

  Difficulty for KB952287

  More information:
  http://support.microsoft.com/?kbid=952287 .

  I've contacted Microsoft Support on this issue and they could not help but suggest to post here.

  Thanks in advance for any help.

  If you don't want to go in this direction, you should call dell and ask for a replacement recovery media.

  And maybe ask a copy directly from the operating system without any OEM software or all the changed settings. (a copy of the DVD retail)
  See you soon

  Today, it was a good day, I didn't have to use my AK.

• Printer installation error (could not install the driver, error 28)

  I just bought a new printer (Epson XP-204) and tried to install it on my laptop Dell XPS15 (running edition W7 home 64-bit).

  After you have installed the software and drivers, I connected the printer to a USB port, Windows detects it and started to install the driver. After a few seconds, I got an error message telling me that it was an error and the driver could not be installed (error 28).
  I managed to make the printer works by using its WiFi connectivity, but now, I found ALL my USB printers have disappeared and I can't use it anymore. Whenever I plug a printer into the USB port, I get the same message with error 28. What is happening on printers that worked very well until I tried to install the new Epson in the USB port.
  I tried to restore the system to the State prior to the installation, but the system restore fails to complete and return an error message.
  All my USB devices work ok (mouse, storage, debuggers, etc) the problem only occurs with the printers.
  I tried to start in safe mode and remove all USB devices, but after mounting them again once the error occurs again.
  I don't know what else to do (reinstallation of the operating system is not an option, and if I do, I swear I'll go to Linux).
  No idea?

  Hello

  Problem solved!
  After reading this page: http://www.asyndetic.com/blog/2010/02/06/debugging-usb-device-installation-on-windows/ I found it lacking the USB.inf file in my system too (I don't know why or how it has been deleted).
  I copied the file from another machine, removed the printer in Device Manager, rescan the devices and Windows found and installed all the drivers with success!
  Thanks for your time,
  Fabio Pereira

• Windows installation package will not install ITunes

  With the help of Windows 7 on a HP Pavilion g7. My version of Itunes (already installed) would not allow me to sync my new IPhone 4GS, prompted me to download the latest version of ITunes. Everything goes well until the installation. Then, it no longer gives the message "there is a problem with this Windows package install." A program that is necessary could not be run "."

  Thank you in advance, I hope someone can help.

  I got it to work! I googled the error message and found the problem post the Support of Apple. The fix was simple. Went to control panel, some programs and features, and then Apple Support Update and selected "repair". Restart the computer and viola! Installed ITunes glitch-free!

  Hope this helps someone else.

  Thank you!

• Creative Cloud installer does it not install anything and won't uninstall itself. Nothing in the system tray and see the OU in effect doesn't exit applications

  I ran the installation which opened a blank window with a loading animation. Nothing happened. I rebooted and now Creative cloud installer does not load, I can't uninstall using the uninstall program because it says that the application is running even if I see the nose of this market. I downloaded the file dog and tried a second installation, but which just outside closes after a second execution attempt. Any advice?

  Update: 5 atemot to install and now it claims download applications.

• 'The installer does a not install automatically the mouse driver.  This driver must be installed manually. »

  I just installed VMware Workstation 7.1.3 and when I upgraded VMware on a Windows 7 Ultimate x 64 guest tools, I received the following error message:

  The Setup program has not automatically install the mouse driver.  This driver must be installed manually.

  Everything seems to work fine and there is no problem, indicated in the Device Manager.  My mouse driver (i.e. the VMware pointing device) is v12.4.0.6 and is dated 17/11/2009.

  Someone else has encountered this and is there a solution for this?

  Note that VMware Tools installed in Windows Server 2008 R2 x 64 with no problems.

  Rob

  Microsoft install (MSI) is a strange thing, these problems occur.

  The best way to update the VMWare Tools is to delete (and all other Windows drivers too), then install the new version.

  There is no solution to your problem.

• Can not install MSXML on a Windows 7 64 bit. Help, please!

  • 
    
  • On a Windows 7 64 bit (new installation), I can not install MXSML. I get an error HKEY_LOCAL_MACHINE32\Software\Mxsml2.DOMDocument.4.0\CLSID
  • I am the only user on this computer and I have rights to admin (checked and double-checked). I can not install some software because it bogged down at this stage. Currently, no version of MSXML is installed on my system. Help, please! It is a self-built system using ASUS P6T Deluxe v2 motherboard. Everything else seems to work very well.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Compaq v3713au: driver coprocessor not installed

  Hello

  My compaq used windows xp and I upgrade to 7 32bit.when installation complete coprocessor not installed. I tried so many times, but still cant. Please show me how to solve my problem

  Hello:

  This driver should work...

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34370.exe