vCenter is not running

Similar Questions

• How to find vCenter virtual cluster large when the services are not running?

  Does anyone have advice for locating vCenter in a cluster, when his services are not running?

  For example, I have to restart vCenter and its network is having issues.  I need to go to the host ESX (i) is on and open the console to get to the virtual machine.  But to find that host is on can sometimes take a long time, because I have to log in to each HOST and see if it is the host where vCenter.

  Does anyone have any advice or suggestions to make this process easier?  It is not so important, but just curious to know what others might suggest.

  Thank you.

  I used PowerCLI and

  to connect-viserver esx1, esx2, esx3

  connect to all the ESX(I) hosts and then run

  Get - vm vCenterServerName | Select the name, the host

• vCenter could not connect to the VSM Server

  I have SanHQ and HIT running well on vSphere 4.1. After upgrading vSphere 5.5 and HIT to 4 VSM, my new vCenter could not connect to the VSM server at all.

  1 VSM ip address must be configured on the management or iSCSI network?

  2. I have 2 vCenters to AC and DC, respectively. In this case, I have to install 2 VSM, each to each site? Note that although my VM networks on both sites and management are all connected via VPN, iSCSI networks are isolated.

  3. is it possible to deploy the VSM 3.5 and 4 so that the two vmware VI Client and Web Client have access to VSM features?

  VSM does not work with Linked vCenters mode so that a VSM would be able to access the two vCenters.

  You will need to deploy both VSMs.

  You cannot run two MSM 3.5.x and 4.0.x at the same time.

• Purchase Apple Store app will not run. It keeps freezing at the top. Help please what I do

  I bought an app and the application will not run. It keeps freezing at the top. He asks me on a plus to enter info Apple then he said I bought it but will not open the app

  Delete the app first, only then it re-download again.

  If not, try these standard troubleshooting steps.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• Updated to the latest version. Now that firefox is not running.

  dated firefox now firefox will not run.
  Have to use the dreaded IE for that matter.

  The point on the issue. Need to do a restart and FIrefox now works. GO figure. Problem solved.

• Applications are not running correctly

  I installed the iOS Update 9 and therefore count my applications do not run the way they were accustomed to, something fishy is going on in the back end, I guess. If anyone has an idea about this then please let me know. I need your help

  Hi Shayadri!

  I understand that your applications do not work properly after installing iOS 9.  I understand how important it is to have your apps working correctly, and I am pleased to offer you some advice.  Please try all the tips in this article to support, and if you're still having problems with third-party applications, you will see instructions to contact the developer of the application of aid.

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

  See you soon!

• I have the latest version of Java and the addin card is not there. I have a mac. I'm not running on 32-bit. I had so many problems with this new java updat

  I have updated java 7 up to 45 (by mistake, this version of java does not work with vpn and according to apple, I can't revert to the previous version). The applet plugin does not appear in my Add ons. I'm not running 32-bit. I have read and tried every article I can find. I uninstalled and reinstalled still no luck. I have an iMac, just put update to maverick.

  See if anything here is useful:

  • http://KB.mozillazine.org/Java#If_the_Java_plugin_does_not_appear_in_the_Add-ons_Manager_even_though_Java_is_installed

• Firefox 17.0.1.4715 currently running on Windows XP SP3, I was asked to upgrade to Firefox 18, ran the update, asked to restart, gotten no restart and can not run Firefox

  Installation has been apparently successfully, I got a prompt to reboot and says OK. Firefox 17 closed, but there is no restart. Attempts to launch Firefox to icons or start menu get no reaction.

  The Firefox.exe in Program Files is the 17.0.1.4715 version. It will not run.

  Avast antivirus (but I did a lot of Firefox updates before this installation and no conflict).

  on this site, you can choose a download to the location you want: https://www.mozilla.org/en-US/firefox/all/ (again, it just to install on top of your current version and it will replace it)

• Re: Driver for Toshiba system do not run after instalation

  Toshiba system driver not running after instalation in 64-bit windows 8

  Please post more information. Model of laptop, OS, what you're doing and which driver exactly make trouble.

• Print Spooler service is not running

  I'm trying to re - install my printer, but I get a message that says "operation could not be performed. Print Spooler service is not running.

  Hi pyq718,

  Follow the steps below to check the print spooler.

  1. type services.msc in run (XP) or search programs and files (Win 7 and Vista)

  2. click on the (local) Service

  3. scroll down until you get to the print spooler, and then click on it once to select it.

  4. in the top left corner, you can stop and then start the spooler to make sure it is running.

  

• Satellite M70-360: CEekey.eke can not run because its the missing dll

  I accidently deleted the ekecioctl.dll and now whenever I start my laptop (Satellite M70-360) I get an error message saying that CEekey.eke can not run because its the missing dll. Anyone know where I can download the dll?

  Thank you

  Hello

  The CEekey.exe seems to be part of the Toshiba E - key utility.
  Therefore, you should try to reinstall this utility to obtain the keys working again.

  Another clue; have you tried to restore the operating system to the early time point?
  XP supports the System Restore tool. You can easily put the BONE at an early stage and the E key should work again I hope ;)

• Is it true that I can not run more than 60 Hz on screen?

  Is it true that I can not run more than 60 Hz in 640 x 480 on my laptop with nvidia go 7600? or is there a driver for my lcd screen...?

  Why do you want to change the screen on the TFT screen refresh rate?
  LCD monitors do not suffer the same problems as their predecessors of the TRM and the refresh rate does not simply mean the same thing. LCD or TFT monitors will provide excellent quality and resolution at 60 Hz.
  Its response time, brightness of the Image and the Image contrast ratio the most important question for a TFT or LCD monitor.

  Operating systems set the different default refresh rate. Windows 95 and Windows 98 (se) together the highest refresh rate possible. Running Windows NT operating systems such as Windows 2000 and Windows XP descendants, however, by default the value of the for the 60 Hz refresh rate.

• HP Pavilion Notebook PC g7 - The Audio Service is not running

  I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?

  HP Pavilion Notebook PC g7

  #ABA product number A6Z29UA

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Deployment of casting RT VI for SBRIO-9631 does not run

  I use the following with a SBRIO-9631:

  LabVIEW 2010

  RIO 3.5.1

  VISA 5.0

  I stripped down to my program to the point... so I now have a simple communication TCP/IP RT VI which comes from the STM. I have install a real-time application generation and built the VI (RT_com_ .vi [top level]). After that I have a right-click to deploy in the 9631, in a popup, it says once he needs to restart so I click ok. So when I run the Windows host VI it should connect and get the STM meta data, but is not, and it seems that the RT VI is not running or?

  I joined the project if someone wants to beat the head with her that I am running out of ideas.

  E-mail Simple (STM) reference library I used can also be downloaded from OR to:
  http://zone.NI.com/DevZone/CDA/EPD/p/ID/2739

  I used the stm_202_installer.zip

  I thought it would be easy. Good grief! I need help.

  Pete

  I found my problem with the code.

  It turns out that the ownership of the attributes of the objects in the front should be avoided. I was using a property node to read my meta of an enum of the type defined... strict data channels beautiful methodology Windows not RT when I replaced this with an array of string constants, meta-data, I was able to control my RT application. I found the following KB document that I was led to this solution.

  http://digital.NI.com/public.nsf/allkb/E03EE22D2E50C2FD86256FD400019116

  I hope this helps someone in the future!

• void VI does not run with the main VI.

  My main and sub VI is attatched.

  danil33 wrote:

  Re: void / VI does not run with the main VI.

  When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

  Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.