No errors, do not print

Similar Questions

• 1320c light orange flashing - error will not print

  Orange error flashes on my 1320c printer. When I turn on the printer, everything looks OK. Then, a few minutes later the orange error light flashes.

  I tried to print after turning on - before slight error could have lights... done printer looks like it was a gear to printing then stopped and orange flashes.

  I wonder if it is the fuser unit? I've checked everything. Fuser is not hot - which made me think that it wasn't heat. How can I solve this problem?

  Printer is around the age of 16 months. Use of light.

  I can't find 'reset button '. Nothing like that inside the side door.  You kindly would tell me where exactly it is?

  Thank you.

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• HP psc1350 all-in-one: check printer cartridge error will not clear

  In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

  Hey @dennisc10,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

  If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I use Firefox version 3.0.19 and I have Windows 7. When I use Firefox as a browser, I can't print my emails. I get an error message: «not available pcfax» If I use IE I don't have no problems printing emails.

  I use Firefox version 3.0.19 and I have Windows 7, which came with a new computer. When I use Firefox as a browser, I can't print my emails. I get an error message: «not available pcfax» If I use IE I don't have no problems printing emails.

  This has happened

  Each time Firefox opened

  == 1 day with the new computer about two weeks ago.

  Looks like you got the wrong printer selected.

  When you get the print window, choose another printer in your printer dropdown. You seem to have a fax printer selected instead of a physical printer.

• printer does not print, it says error: 0xc18a0307

  indicates the error: 0xc18a0307.refer to the documentation of the printer...

  the unit is photosmart c5183... tried to switch market but same indication appears...

  Hello Alvin200861

  I came across your questions and we have a solution for this and you can try it, but which apply only on the error codes starting with "0xC18A" one with «0xc19a»

  Try the following steps for Photosmart C5100 series under which you printer falls.

  A. - Press and hold the "left arrow" key
  B. - Press the "Setup" key and release both keys.
  Display should say "enter special key Combo".
  C. - Press and release the OK"" button.

  Display should say "Support" and display the FW rev (something like R0631R)

  Press and release the right arrow button until the display shows "Menu of the System Configuration'.

  Press and release the OK"" button.

  Display should say "hardware failure status. If it isn't there already, arrow above for "Hardware failure status"

  Press and release the OK"" button.

  Display should say "hardware failure status: clear." Press OK to erase.

  Press and release the OK"" button. Message becomes "hardware failure (breakdowns) resolved state. Press Cancel to continue.

  Press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the 'ink system failure' is displayed. DON'T TRY TO PRINT AT THIS STAGE.

  Using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

  Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

  Switch on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

  If the printer has already initialized, then go to the next step. If this isn't the case, the printer will start the "ONE TIME INK initialization PROCESS". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

  To check, features of the printer print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use or installation of the software.

  If the error is still there, or reoccurs replace the unit.

  -----------------------------------------------------

  0XC19a error messages, the printer can be retrieved.

  Good luck and if that fixes the problem please click on Bravo...

  ---------------------------------

  Although I am an employee of HP, I speak for me.

• Windows 8, the error message indicates printer does not print. It prints, but does not remove the queues

  I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?

  Hi eri2198859,

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• Unable to print error: is not an ethernet driver

  Original title: Printer does not print

  Please help me I'm so aggravated. I have a Samsung laptop, RV520. I onstalled a HP Photosmart all-in-one wireless printer C4580, scanner, copier with the instalation disk. It wouldn't work so I had to go buy an adaptable Ethernet cable so that it can work. Copy and scan, but will not print from the laptop. I get an error message saying that I don't have an ethernet driver. Where I don't get that?  Also when I try to print a document or test page they just straight up in the check for the printer.

  Hello

  1. what operating system is installed on the computer?

  2. is your printer is connected to a network?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1:

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  More information: http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3418707

  Hope this information is useful.

• The printer error will not fade

  HP 1350 printer showing jam, it is clear and will be printed test page, remnants of the error and does not print. Printer has been restarted; computer has been restarted. Printer has worked very well so far.

  Hi, ChristineBecker,

  Try the following:

  Right click on my computer

  Select manage

  Click on Device Manager

  Click on the + sign next to the printer

  Right-click on the printer and select uninstall

  Click on the + sign next to the imaging device

  Right-click on the printer and select uninstall

  Click the + next to Serial Bus Controllers

  Right-click on the printer and select uninstall

  Restart the computer

  Windows will reinstall drivers

  Go to the manufacturer's website and search for updated printer drivers

  Message has disappeared?

  Start > type services.msc

  Scroll down and right-click on print spooler

  Select Properties

  Click on stop

  Wait for Windows to stop the printer

  Click Start

  Wait for Windows to start the printer

  Under Startup type, select automatic

  Close this window

  Shutdown computer

  Unplug the cables for printer from the computer and the printer.  Wait 5 minutes and reconnect them to the.  Turn the printer and the computer.

  Message is now gone?

• printer (hp 6500) error #6x61011beb printer does not print

  I installed new black ink cartridge.   Printer says that there is an error?  the number is at the top of this page.   Do not see where I put the wrong cartridge.  If I did, it would not so say?

  Hello bunk bernice.

  From what I could find about this error code, it's a general error with the printer, having to with the ink cartridges or the return shipping.

  Here is a link to a thread on the forums of HP:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-and/general-printer-error-0x61011beb/TD-p/160899

  If this thread does not help, I encourage you to create a thread on the forums of HP and they will be able to help you much better that we can here because it's an HP error code.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• HP ENVY 4500: Error: the printer could not print

  After a saga of long hours to get my new 4500 DESIRE to produce a readable text, I finally have a wonderful clear text, but now realize a new problem: the printer stops at Midway through each second page and it spits out just with the white background.

  An error message appears briefly in windows that said "the printer could not print. If I click on it there is no more details. It seems that windows stops just sending information to the printer. My print spooler service is running and we are within 5 feet of the router with a strong bond. I did everything I can think of including updating the firmware and driver.

  Any ideas?

  Thanks for your suggestions! However, most did not address my problem. I ran the Print and Scan doctor before posting this thread, but it found no errors. I was unable to get any additional details about the error.

  SOLUTION: I found a solution after reading this thread. I've updated Windows 8.1 a few weeks since the last time I had the printer works. I've updated Windows again today and the problem immediately went away.

  Although I couldn't see everything concerning him spool printing or printer in the update drivers, it seems that the bug was caused by a Windows Update, and subsequently fixed by another update. I was able to print a 40 page document and several page 5 those without any problem, when before it was bad, making it through several pages before he died. Fixed!

• My HP Officejet 4300 Series printer is not printing-"printer error says"no connection to the computer.

  Original title: My HP Officejet 4300 Series printer not print

  The mistake of the printer says "no connection to the computer. The computer error says: "the printer is offline. All necessary cables are connected. What should I do?

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try this method and check the status of the issue.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also refer to:

  Resources for the resolution of the printer in Windows XP problems.

  http://support.Microsoft.com/kb/308028

• Windows photo printing Wizard error message "not enough memory available"?

  Windows photo printing wizard when trying to print a jpeg photo get error message "not enough memory is available for rocess this command" I talked to my tech guy and he said another customer is having the same problem.  Is this a problem with a recent update?  How to fix?  This worked well before

  You can try try by forming http://support.microsoft.com/kb/315265 of disk error checking
  You can also try the steps in this link http://support.microsoft.com/default.aspx?scid=kb;en-us;241258

• When you try to print the document his service hence giving error does not

  I am using windows xp pro sp2

  When you try to print the document his service hence giving error does not

  then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

  Please help me

  Hi kalpesh_vaghela,

  1. Did you the latest changes on the computer?
  2. What is the full error message that you receive?
  3. What is the number and model of the printer?
  4. You use any program to print the document?
  5. Are you experiencing a similar problem with any program that allows you to print?
  6. You have security software installed on the computer?

  Method 1

  See the link below and try the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.