vCenter metric not available after installing the view adapter

Similar Questions

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Bluetooth not available after upgrading the BIOS on HP g62-a60EM

  After upgrading the BIOS, I can't use bluetooth, as I can't see it in Device Manager. I've updated the BIOS with the file sp55430 on the support site. Battery is not holding a charge, it runs out after about 30 minutes. Back BONE back then now, I can use bluetooth. My OS is Windows 7 Professional 64 - bit - Slovenian.

  If anyone can help?

  Kind regards

  Dragan

  Hello

  Try to update the BIOS again. After that make sure that the wireless and Bluetooth lights is lit. Also download and installed the drivers of bluetooth and verification.

  After the BIOS also check in BIOS if Bluetooth is turned on:

  Menu of the System Configuration > Integrated device options > Enable/disable integrated Bluetooth Radio device
  

• No option available after installing the plug-in for Microsoft Visual Studio 1.2

  Hello!
  I am a developer of a new blackberry, and I'm doing my first sample.
  I have experience with Microsoft.Net (Asp.Net and Vb.Net) but I've never done anything to a smartfone.

  So, I followed these steps:
  -J' read the documentation.
  -J' downloaded the "plug-in for Microsoft Visual Studio 1.2";
  -J' downloaded 'Simulator 5.0. "
  -J' installed the "plug-in for Microsoft Visual Studio 1.2";
  -J' installed the Simulator "5.0".

  Everything worked fine (I received no error message).

  After that, I tried to initialize a "Hello World" application in Visual Studio 2008, but I can't find any blackberry resources. There is no options in any menu of Visual Studio, there is no new project type, there is no option on the menu "Add-in manager.

  I found a video saying where to find the browser "BlackBerry" in menu "browser with...» "my project (when I click with the right button mouse), but this option is not there. I have not all references to the library or just about any BlackBerry resources on my VS2008.

  Can someone help me?

  I am grateful for your attention.

  Best regards

  João Paulo.

  [email protected]

  Check out the following thread... It should give you the manual steps on how to get the BlackBerry browser in the dialog "Browse with.."

  http://supportforums.BlackBerry.com/T5/Web-development/I-don't-see-BlacberryBrowser-in-quot-Browse-wi...

• Headphone Jack does not work after installing the audio driver on Equium A200

  Can anyone help? I downloaded a page update Toshiba sound card driver and now my headset does not work.
  The sound plays just of computer speakers.

  Please someone give answers.

  See you soon

  Hello Rocko

  I don't know how to answer them. Maybe you should explain your problem a bit better. For example:
  What operating system you are using? Why you installed the sound driver? Is the reason why your own installation of OS or you have had a few problems of her before?

  Sorry, but I just want to understand what is happening with your computer satellite phone?

• Satellite L50-A01Q - WLAN not detected after installing the Atheros WLAN driver

  I have a C50-A01Q. I recently replace the hard drive for an SSD. I installed Win8.1 via a DVD downloaded from Microsoft. I also installed the Download Driver Atheros Wireless LAN from Toshiba. However, the system does not recognize the WLAN. Someone reinstall windows 8.1? How did you get the driver?

  Maybe your laptop has a Realtek or Intel WLAN card inside. Specification of your laptop does not for me so I can't say with certainty what WLAN card is inside.
  Try to install other drivers and check in Device Manager.

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye

• Windows 10 can not boot after installing the Bootcamp drivers

  I have an iMac late 2013 (21.5 "), and I just got 10 Windows so that I can install it using bootcamp. I spent a good part of two days trying to get Windows to work with installing bootcamp, but no matter what I do, the result is always the same. If I let bootcamp install its driver (as he wants when you start first in 10 Windows after installation), Windows will crash before loading fully at the next startup. He comes to see the windows logo pop up with the loading circle spinning around for a second, until what the circle all the sudden stops. After that, it restarts and I hear the iMac from sounds (this much quieter time for some reason any) and then it does the same thing. The third time that it restarts, it starts the automatic recovery mode and I get caught for the advanced boot menu. After letting Windows reinstall itself, it works fine except that it lacks some of the display driver (I can't adjust the brightness) and I also can not use the function keys on my apple keyboard, or the magic mouse at all.

  I tried to reinstall OS X El Capitan and then repeat the installation for Windows. I tried with the driver OS X Downloads for me in Bootcamp (version 6.0), and I've also tried using those newer that Apple offers for download on their site (Version 5.1.5769). All attempts of the result of facilities Bootcamp in crash of boot even when Windows is restarted.

  Windows is still usable, I just think it would work as it is supposed for a Mac wish. Why the bootcamp drivers break 10 windows? Has anyone else had a similar problem? If so, any suggestions?

  Thank you

  BC 6.x drivers are more recent and recommended for Windows 10 models 2013 and following.

  BC 5.x drivers are older and meant for W7/W8.1. Specifically, in your case, 5.1.5769 are not valid drivers for your model. iMac 21.5 inch 2013 requires such Software in Support of Boot Camp 5.1.5640 indicated in the installation of Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

  Publication date: February 11, 2014

  File size: 925,6 MB

  The system configuration required

  • MacBook Air (11 inches and 13 inches, beginning 2014)
  • MacBook Pro (retina, 13 inch and 15 inch, mid-2014)
  • MacBook Air (11 inches and 13 inches, mid 2013)
  • MacBook Pro (retina, 13 inch and 15 inch, end of 2013)
  • Mac Pro (end 2013)
  • iMac (21.5 inches and 27 inches, end of 2013)
  • Windows 7, Windows 8 and 8.1 of Windows, 64-bit

  It is not a problem of drivers BC. W10 requires updates that it shouldn't. Please see Windows crashing in 10, but know not why. as reference. I suggest that you follow the steps described in the linked discussion and test.

• Satellite A500-1GL - Microphone does not work after install the OS re-

  re-installed OS updated all bios drivers etc. Can't get anything to record. Skype not getting no sound. Do not record other programs.
  Have uninstalled and reinstalled all the audio drivers, including the driver of the webcam.
  Have you checked the forums, but cannot find any solution.
  Can anyone help?

  Satellite A500-1GL.
  Windows 7 64 bit

  You have reinstalled original Win7 64 bit family Premium that you got with your machine?

• Hardware not working after installing the OS

  I have a Toshiba Satellite, I installed Win XP Home.

  I'm unable to connect to the internet or use other drivers for the video.

  I looked at the Device Manager screen and it shows the Ethernet and the video controller than other devices.

  I tried to reinstall the drivers from the CD of Win XP, but nothing is found for one of these devices.

  I don't have access to the original disc. So why these pilots is found on the Win XP disk? Any suggestions?

  Thank you! Fred

  HI Fred,.

  I don't know what satellite phone you have, but it is normal that a CD of Win XP from MS is not all drivers!

  It is impossible to collect all the drivers for laptops and on a 700 MB CD!

  Otherwise XP is also a few years old and new drivers for newer devices were not yet designed.

  The best way to get these 2 drivers is to ask someone of your friends if you can use their internet or go to a coffee of interest!

  At https://eu.computers.toshiba-europe.com you will find all the drivers for each Toshiba laptop!

  Hans Bye

• A9J40A: Want 5530 does not print after installing the update of the printer

  Hello

  My screen on my printer tells me there's an update, I went ahead and agreed to it.  After a time of 5 min update, it says please wait.  I waited and waited and waited and nothing happened.  I turned it off (via disconnect because just hit the power button would not turn it off).

  When she came back he said the scanner was not working (wth he's not broken), I needed to load paper (he was busy book), necessary printer cleaned heads (done, did not help), and it must be aligned (don't let me do).

  It will not print anything from my computer, but it will print the test pages, or documents from the touch screen of the printer.

  My printer was purchased last March, but the site says it is out of warranty, and I can't provide proof of warranty because my printer is broken.  So, I can't even contact them for assistance (the most riduclous and assinine thing I've ever heard of the).

  I am so Livid over this, I have nothing on my printer and it's the fault of all this stupid update, but still I can't contact anyone at the company to help me.

  Any help or advice would be greatly appreciated.

  No, I do not have windows, I have a MAC with software up-to-date.

  Thank you in advance.

  Hi @Pompom2011,

  Welcome to the Forums of HP Support!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with works as a private of the Forum messages, this post has instructions.

  Thank you.

• Custom next and not available after entering the course back

  Hello!

  I am using Captivate 8 and I created my own next and back buttons so I could control them as I wanted (i.e. takeaway then during a control of knowledge until he be tried or tried).  I used smart shape buttons, placed on the first screen and makes them available to the rest of the project.  If everything works well until a user running the course in the LMS, decides to leave at some point mid-term and then chooses to return to the course.  The bookmarking feature works very well, but I noticed that the back and next buttons are no longer on the screen.  I guess because the entry point jumps on the first screen where you can see these buttons.  Any advice? I could put on each screen, but it seems that the device the "rest of project" not to mention the increase in file size.

  Thank you!

  I just did a test on SCORM cloud. I created a HTML5 project and used a button following smartshape for navigation. I left the course on slide 4. When I restarted the course, I returned to slide 4 and button was there.

  So, I guess there is a problem with your project.

• Will not start after installing the Vista SP2

  Last night my old Vista SP2 computer.  Installation seems to have success, but to restart the computer as part of the installation of automatic update, it failed.  During a part of the boot with a screen similar to BACK sequence, it arrested, printed a msg that appears to be in hexadecimal and would go no further.  Restart with a sequence of hot or cold start to produce the same result.  I tried to correct the problem by using the Startup Repair on the Vista installation disc and received a msg that Windows could not repair the problem itself.  I sent the results to Microsoft using this option in the Startup Repair tool.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your can fall into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  More information shows what the process that it loads.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• CD player not recognized after installing the second hard drive

  My OptiPlex 755 Windows 7 with a ran fine until I installed a second hard drive.  Now only the hard drives are recognized.  I have cd players connected to SATA 2 and 3 a the SATA drives 0 and 1.

  The 755 a 0 and 1 and then 2-3 THEN esata.

  Other chipsets have 0 1 2 3 4 5 and raid 5 capacity.

  These options appear as
  SATA 3
  for the mini tower,.
  SATA
  0
  through
  SATA 2
  for the
  Desktop
  for

  The blue connector is drive 0

  The 2nd Black, this is the dvd's.

  There is no car setting just the port enabled or disabled.

  2nd HARD DRIVE GOES ON THE WHITE CONNECTOR

  The 2nd CD GOES ON THE CONNECTOR FOLLOWING

  DRIVE CABLE IS BLUE AND CD CABLES ARE ORANGE.

  

  

  

• Adobe Muse is still available for educational site licenses? Our technicians said that it was not available to install the last semester. What now?

  Need to answer question about license educational site for Adobe Muse.

  Hello

  Check this price student from Adobe (Muse)