Similar Questions

• vCenter Orchestrator device password reset

  Hello

  I have installed vCenter Orchestrator 5.1 camera, I'm unable to connect http:// orchestrator_server : 5480. It is said Impossible to authenticate the user. Please RΘessayer.

  I would like to reset the root password. Please let me know how can I do?

  Thanks, Vinod

  Hi Vinod,

  Here is an article describing how to do it on vCenter device - http://kb.vmware.com/kb/2069041

  The steps should be the same for vCO device.

  I hope this helps.

  -Ilian

• VCenter Orchestrator certificates

  If I import a certificate from a vCenter Orchestrator, and then afterwards I implement PKI to give my vCenter a certificate approved, will be my workflow who fail vCenter until I have import the new certificate?

  Thank you!

  Hello

  I think it will be. If you plan to change the cert of the vRO also I think that the order should be:

  -Change the certificate of the vRO. If you are using a public CA certificate that all the imported certificates will be deleted form the keystore that we create new keystore in the present case.

  -Change the certificate of vCenter.

  -Import the certificate vCenter vCO.

  You might find this interesting:

  How to change the SSL to a vCO device certificate

  How to change the SSL to a vCO device certificate | Kaloferov spas & #039; s Blog

  How to change the certificate SSL of WIndows installed vCO

  How to change the certificate installed WIndows SSL vCO | Kaloferov spas & #039; s Blog

  vCO Workflow to automate certificate generation process

  vCO Workflow to automate certificate generation process. Kaloferov spas & #039; s Blog

• How to run a Script in Vcenter Orchestrator... ?

  Hi team,

  
  

  I m starting to VMware Vcenter orchestrator. I installed Vcenter Orchestrator autonomous set up in my test environment to Windows server 2008 R2. I want to run a script in a client application to vcenter orchestrator.

  
  

  But I was unable to run the script in Vcenter orchestrator. I m getting after that error"you are not allowed to run the local process '.

  
  

  I couldn't configure vCO to allow execution of local processes & cALTER vCO to allow access to file system to the scripts folder:

  
  

  To configure the VCO to allow running local process:

  • Go to/app-server/server/vmo/conf
  • Edit the file vmo.properties and Add (if not already done) the following line to enable

  com.VMware.js.allow - local-process = true Set up VCOs to allow file system access to the scripts folder:

  • Go to/app-server/server/vmo/conf
  • Edit (or create if it does not exist) the file js - io - rights.conf
  • Assuming that the name of a "Orchestrator" on a device folder, enter the following (set at will for windows):

  But in my server I found no record of the server app-server... Please someone help me on this to solve the problem.

  
  

  Kind regards

  Odile M

  If the file does not exist, you can create simply as described here: http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.vco_administer.doc_42%2FGUID-C9F6748A-32F9-4712-99EB-3A48BFFDF5E9.html - this is a plain text file.

• How to download Vcenter Orchestrator?

  Hi team,

  I want to download the Vcenter orchestrator standalone application with the latest version. Please somebody guide me or provide good link for download Vcenter orchestrator standalone application (not device Orchestrator) to be installed on the Windows Machine in my test environment.

  NOTE: I need stand-alone Orchestrator (not the Orchestrator device) application installation files
  

  Kind regards

  Odile M

  Automation analyst

  TechM

  Hello

  refer to the documentation and the download links for the plugins here

  VMware vCenter Orchestrator Plug - Ins Documentation

  as well as our exchange of solution (for 3rd party integrations)

  https://solutionexchange.VMware.com/store/category_groups/cloud-management?category=cloud-automation

  See you soon,.

  Joerg

• Introduction to Vmware Vcenter Orchestrator

  Dear team.

  I m starting to Vcenter Orchestrator. I just want to know the details on Vcenter orchestrator information.

  1. the list of tasks can be automated in Vcenter Orchestrator.

  2. the question whether she can be able to automate certain tasks in linux system?

  3. what operating system, it will support?

  4. only it can possible to automate the workflow for the only Vmware application.

  Please help me on this question.

  Kind regards

  Odile M

  1. There are hundreds of workflows available for vCenter vCenter plug-in turned in vCO. If there is not a workflow that does what you need, then you can probably write your own or use some of these workflow library in combination to do what you need.
  2. Yes, you can use the workflow operations or the plug-in of SSH to connect to the guest Linux OS and run scripts. Customization of Linux is also supported for the operation as Clone/customize, and material of the add/edit like any other virtual computer.
  3. See the documentation of official response please. vCO Server can run under Linux (vCO device) or 64-bit Windows operating system. VCO Client can be run on Linux, Windows 64 - bit or 32 - bit, and OSX. As has been pointed out by Techstarts, are taken care of according to VMware (vCenter) guest operating system.
  4. There are many plug-ins available for vCO, allowing it to automate many different systems. See http://solutionexchange.vmware.com and click on Orchestrator Plug-ins to see what is available. Those who come to add plug-ins provided with vCO.

• vCenter Orchestrator Installation link

  Does anyone have the link for vCenter Orchestrator Installation link

  It comes to the documentation page:

  https://www.VMware.com/support/pubs/orchestrator_pubs.html

  You can get all related documents and two download links are here as well (windows and device).

  Device: http://www.vmware.com/download/download.do?downloadGroup=VSP51-VCL-VCOVA-510-EN

  Windows: https://my.vmware.com/web/vmware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_1

  Note: The windows installation is part of installing vCenter. So you need get installing vCenter and insdide you can find the vCenter Orchestrator installation folder. vCenter Orchestrator could be independent installed the installable here.

• No vCenter Orchestrator connecting to vCenter 5.1

  I configured the parameters required in VMware vCenter Orchestrator Configuration via https://localhost:8283 including a separate SQL DB. When I log in the Web Client (5.1) Select vCenter Orchestrator of stocks, that I'm not able to specify a vCenter Orchestrator by choosing change configuration, and of course there is no available workflows, have I missed a step?  IM can not see the plugin in the vsphere Client GUI

  Yes, SSO is necessary regardless of the device you're using, or one based on Windows Installer. When you configure SSO in vCO, it fits in the SSO (vCenter) server so that integration takes place...

• How to make a call from CPO to vCO (vcenter orchestrator)?

  How to make a call from CPO to vCO (vcenter orchestrator)?

  Hello

  I am trying to create a workflow that would connect to a vCO.

  I was Expecting

  1. how to create targets for the vCO and

  2. how acess that target.

  Concerning

  Shiva

  1) there is no target for the vCO. We have a target/connection to Virtual Center (vCenter)

  (2) If you want to make vCO calls you could do, it all depends on how the API is structured. You can make calls via web services or CLI, etc.

  If you give your use case it is perhaps more to discuss. If you need an ENH or put something in, you can open a case with the TAC.

• Connect with vCenter Orchestrator 7

  Can not find, where I can connect the camera orchestrator 7.0 can connect to the Server vcenter. There is no documentation available for this version

  can anyone help? Thank you very much

  Connect vRO 7 to vCenter, you can use a workflow now, check under \Library\vCenter\Configuration

  - Add an instance of vCenter Server <--> this workflow implements vRO to allow vRO to things with vCenter.

  - Registry vCenter Orchestrator as a vCenter Server extension <-> this workflow shows vCenter Orchestrator is available to run workflows. It is important for vSphere integration Web Client for Orchestrator. Note: vRO and vCenter MUST use the same source SSO and the user logged on to the Web Client vSphere must be a member of the Administrators group of the vRO you specified for Orchestrator.

• vCenter Orchestrator HTTP API: POST request error 400 1032

  I'm trying to start a workflow via a POST request to the vCenter Orchestrator API. When I run the same workflow with a GET request, there is no problem and I get the following result in the localhost_access_log.current_date.txt:

  [src_ip_address] - [13/Oct / 2015:04:46:00 + 0000] "GET vco/api/flux/af83cf34-6a00-45b5-946e-0d44ece508bb/exécutions/HTTP/1.1" 200 272

  However, when I run a POST with the following parameters:

  restMethod: POST

  restEndpoint: https://[dest_ip_address]:8281

  restPath: / vco/api/workflows/af83cf34 - a 6, 00-45 b 5 - 946e - 0d44ece508bb/executions /

  user: [username]

  content: {"parameters": [{'name': 'name1', 'type': 'string', 'value': {'chain': {"value": "Value1"}}, 'field': 'local'}]}

  contentType: application/json

  accept: application/json

  I have the following error in localhost_access_log.current_date.txt:

  [src_ip_address] - [13/Oct / 2015:03:53:39 + 0000] "POST vco/api/flux/af83cf34-6a00-45b5-946e-0d44ece508bb/exécutions/HTTP/1.1" 400 1032

  And the output on the client side:

  {Success = no, ResponseHeader = {null = HTTP/1.1 400 Bad Request, Server = Apache-Coyote/1.1 Content-Length = 1032, Content-Language = EN, connection = closed, Date-Wed, 13 Oct 2015 Message = Bad Request, ReasonPhrase is Bad Request, StatusCode = 400}}

  I'm in vCenter Orchestrator 5.5. There is no output to the server.log file. I didn't have a chance, researching the 400 1032' error number. [dest_ip_address] is HTTPS. Can anyone help clarify this?

  The command line below seems to work for me using the cmd terminal Windows:

  curl u - ikv name h ' Accept: application/json ' h ' Content-Type: application/json "d" {\"parameters\":[{\"value\":{\"string\":{\"value\":\"value1\"}},\"type\":\"string\",\"name\":\"name1\",\"scope\":\"local\" "}]}" x POST https://ip_address:8281/vco/api / stream/af83cf34-6a00-45b5-946e-0d44ece508bb/executions

  Note that the double quotes inside the body of the request are preceded by the backslash character.

• Cannot register or update of server vCenter vCenter Orchestrator on extension

  All hell, we could not register or update of server vCenter vCenter Orchestrator on extension. Common error occurs when try add a vCenter, com.vmware.vim.vmomi.client.exception.InternalException: "ServiceInstance" thrown exception unexpected "java.net.UnknownHostException" with message of managed objects ' new virtual Center host: name or service not known not ' when calling method "getContent" - Suresh

  Issue slipped after re-entry vCenter and SINGLE authentication certificate. -Suresh

• vCenter Orchestrator 5.5 "Session Reconnected.

  Is vCenter Orchestrator backward compatible?

  When I have connected a vCenter 5.0 to a vCenter Orchestrator 5.5 I get a constant string of 'Session reconnected'?

  I checked my permissions and they are correct. This problem occurs with 2 different accounts.

  [11:56:53.783 2014-03-03] [I] Session reconnected

  [11:56:58.990 2014-03-03] [I] Session reconnected

  [11:57:04.199 2014-03-03] [I] Session reconnected

  [11:57:09.415 2014-03-03] [I] Session reconnected

  [11:57:14.623 2014-03-03] [I] Session reconnected

  [11:57:19.832 2014-03-03] [I] Session reconnected

  [11:57:25.042 2014-03-03] [I] Session reconnected

  [11:57:30.251 2014-03-03] [I] Session reconnected

  [11:57:35.463 2014-03-03] [I] Session reconnected

  [11:57:40.673 2014-03-03] [I] Session reconnected

  [11:57:45.881 2014-03-03] [I] Session reconnected

  [11:57:51.091 2014-03-03] [I] Session reconnected

  Thanks in advance for your help.

  ~ Alex Allen c.

  I do not have the matrix of compatibility in front of me at the moment, but I think that vCenter vCO plugin version (supplied with the appliance vCO 5.5) 5.5 is compatible with vCenter 5.5 and 5.1 vCenter.

• Internal error trying to add vCenter Orchestrator Endpoint

  Hi team,

  I am trying to configure vCAC 6.0 using the inbult Orchestrator 5.5.1 However when I try to add the vCO by accessing Home > Administration > Services Advacned > endpoints and click on the + adds vCenter Orchestrator plug-ins such as endpoints so that you can create service plans with Advanced Services Designer and publish the workflow as catalog items. I get the following error:

  Internal error An internal error has occurred. If the problem persists, contact your system administrator. When you contact your system administrator, use this reference: d6c92026

  I tried to connect to vCO by using the following accounts, but this has not helped to solve the problem:

  [email protected]

  [email protected]

  It seems to me that the error is always flagged only when I try to run the task above. Can someone please help me solve this problem?

  Thank you

  Arun-

  https://Twitter.com/arunpande

  http://highoncloud.blogspot.in/

  Virtualization VMware on NetApp

  8281 is the correct port. Probably, you must use Basic authentication and insert the credentials of the user that you use to sign in to the vCO client.

• How to create Self Service Portal in Vcenter Orchestrator? times

  Dear team,

  I want to create the Self Service Portal to reset user password in Active Directory in Vcenter Orchestartor. Could someone guide me for this

  Note: I installed Vmware Vcenter Orchestrator 5.5.

  
  

  Kind regards

  Odile M

  TechM

  I hope it would be only certain types of admins/helpdesk do PW reset because you must connect to the WebView in order to run the workflow... in any case, you can follow this tutorial for a Webview based in vCO:

  http://www.vcoteam.info/articles/learn-VCO/107-create-a-simple-VCO-self-service-VM-provisioning-Portal-part-3.html

  Regarding the other prerequisites:

  vCO must have the ad plugin installed and configured to use SSL when communicating your AD environment. It is a requirement for users created with passwords and resetting passwords.

  When you get to the step of the tutorial for mapping a workflow, you'll want to use the workflow to "Change password". This is a workflow of library Active Directory that are available after the installation of the plugin AD and the vCenter Orchestrator Server service restarts.