Emergency aid - Vcenter Server down - cannot access the ESX host

Similar Questions

• Built-in web server I cannot access the settings HP Officejet 6600 CZ155A tab

  HP Officejet 6600 CZ155A regarding:

  I had access to the embedded on my iMac on OSX 10.8.2 computer.  It did not work so I did an uninstall and then reinstall the HP software.  This is the latest version.  I did also some Apple software updates as requested.  The e-print emial account works when I send a message with a document and prints.  But when I try to enter in additional features in the web server, I can not go beyond the window with the IP address and "admin" displays as well.  I have some information in my file with the name wireless live - but it does not work either.

  Suggestions or comments?

  Thank you.  I contacted HP Support and it took a few calls but it is fixed.  The problem was with the IP addresses.  We emptied the printer.  Assigned to a correct IP and it worked perfectly.  Thanks again for your advice.

• Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

  Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

  I cannot access all features and can be closed only by using force quit.

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

  If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Launch schedule and see if there is an improvement.

• "Windows cannot access the specified device, path or file" for each X 86 application on a Windows 2003 x 64 server

  Hello

  I have a Windows 2003 X 64 server and since a week ago everything works fine.

  For a week or two when I try to run an X 86 application, I always get this error:
  "Windows cannot access the specified device, path or file.
  If I run a x 64 apps everything works fine.
  What made a mistake?
  Thank you

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Email connection problems: cannot access the requested url due to the system on that server error

  How can I get my email on when I get the above message

  Cannot access the url reqested due tosystem error on this server

  Apparently, there is a problem on the mail server. Contact technical support for your email provider. MS - MVP - Elephant Boy computers - don't panic!

• a computer laptop, internet is accessible only if proxyserver offline, my office internet is accessible with the proxy server. without him we cannot access the internet.

  I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?

  Hello

  Work on a domain environment?

  Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.

  If you are on a domain environment then please post the question on the link mentioned below using:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• Cannot add the ESX 6.0 host to vCenter Server 6.0

  OK, I'm testing laboratory a vsan 6.0 cluster.

  I have my running 6.0.0 esx hosts and vcenter server is 6.0.0 also.

  I have the services platform on a virtual machine and vcenter on another. I was able to create a data center, then a cluster below.

  Then I went to try to add a host to my group and I get this error...

  Failed to contact the specified host (hostname\IP). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Per this KB: KB VMware: Add a host VMware ESXi/ESX from VMware vCenter Server fails

  
  

  I confirmed that my vcenter server and platform services server can see all esx hosts. From the vcenter server, it can ping the host esx and PuTTY can access all of them. I even installed the client and it can connect to all esx hosts. I used the netbios name, IP and FULL domain name and they all work.

  I have only a single subnet, so this isn't a problem. DNS resolution works in all areas of both sides, vcenter esx hosts and host esx to vcenter.

  
  

  I am quite puzzled.
  

  
  

  
  

  OK, after working with VMware on this issue, I think that I thought about it.

  All my hosts are DL360 G6 servers.

  My hosts are run the same build «VMware-ESXi-6.0.0-2494585-HP-600.9.2.38-Mar2015.iso» ESX Downloaded from HP.

  All buildings are in trial mode.

  After placing a call to VMware, they had me build some ESX VM, the services of the platform and the vcenter VM on an ESX host. We suspended because it took all day to go upward.

  Once I woke up all the parts (sql server, esx vm, server platform & vcenter) in virtualization nested, I created my data center, then Cluster then added the ESX host.

  The hosts added properly, no error. Then I remembered when I installed ESX inside a virtual machine, I am angry that the iso, I had the habit of HP does not work in my VM nested due to virtualized hardware.

  Then a fire came into my head. We will rebuild all of the physical cluster but NOT use the CV provided the iso file but use VMware provided iso file "VMware-VMvisor-Installer - 6.0.0 - 2159203.x86_64.iso".

  I did it today. I have rebuilt all hosts with the provided iso file VMware ESX...

  Spun SQL Server vCenter, service platform, all VM VM VM you need. My AD & DNS VM are on another server, so he has been upwards all the time.

  Connected to the web interface (yuck!).

  Created my data center...

  Created my Cluster...

  Add all my Cluster hosts.

  All of this worked!

  Therefore, if you encounter the same problem, I'm plan to generate your with the provided iso file VMware ESX hosts and try it. In my case, the provided HP iso file didn't work properly for me.

  I also downloaded the iso file of HP 2 other times to make sure and do a validation test and it did the same thing.

• Cannot access the server message coming up and cannot convert files

  Cannot access the server message coming up and can't convert the files. Works on my desktop, but not at home.

  ER

  Is it ExportPDF?

• Broadband went down for several days but was back on property that still cannot access the internet

  Went away for two weeks and return to find internet and landline phone at the bottom, contacted bt which were going out but it all came back to the top, light on bnroadband but still cannot access the internet!  Any answers please...

  Contact your ISP to solve problems.

• BI SampleAppFiles Server cannot access the correct file

  Hello experts,

  Part of my project is creation of KPIs for my clients. Before doing all this, I'm trying to create a KPI sample and see if it works well.   It is using 11g (1.1.7).

  Here's the problem: I created the sample KPI without problem; However, when I try to open the report I get an error that

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 64023] Cannot access the E:\BIHOME\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1/sample/SampleAppFiles/Data/SAMP_REVENUE_A.xml: no such file or directory for table SAMP_REVENUE_A (HY000)

  The path is correct, except instead (E:\), it should be (C:\).  Does anyone know how to change this? Help, please.

  I don't have a 'E' drive in my system. This forum works on windows

  Help, please

  Hello

  In the sample OBIEE, you have a variable called BI_EE_HOME with this path

  To change this, open your SPR (online mode) and then change repository variable BI_EE_HOME

  

  We call this variable in your connection pool (you can change this path directly on the connection pool too)

  Felipe Idalgo

• Jpg file printing - windows cannot access the specified device, path, file

  Original title: I have a similar problem, I can open the jpg fine, I can't print it

  I have a similar problem, I open the jpg fine, I can't print it, permissions are fine. I get the same erorr-windows cannot access the specified device, path, file...

  Hi Janine.

  1. are you able to print documents?

  2. the problem occurs only with a particular image file?

  3. how the printer is connected to the computer?

  4. What is the brand and model of the computer and the printer?

  5. have you logged as administrator?

  Method 1:

  First of all, try to print a test page and check if it works:

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

  Method 2:

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Note: you must have the Windows XP disc to make the SFC scan.

  Method 3:

  I suggest you to turn off all third-party security software and the Windows Firewall and then try to print the file:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Let us know the results.

• Windows cannot access the specified device, path... .item

  I am the administrator and is not able to access the files to run windows updates, receive internet service this message pops up to everything that I try to open same not open anything in the control panel (windows cannot access the specified device, path or file. May not permissions to access you the item). Please help in any way. Thank you

  Hi vpoelon,
   
  -What is the recent change that was made on your computer after this problem started to happen?
   
  -You have another administrator account on your computer?
   
  -Are you connected to any server machine or no matter what field?
   
  If so, contact the respective service to resolve this problem.
   
  Method 1: There is a post dealing with the similar problem here. See the same thing and check if it also helps you:
   
  Error "Windows cannot access the specified device, file, or path. You can not have appropriate permission to access the item.
   
  Method 2: Follow the steps listed in the link below and check if it solves the problem:
   
  Application of network share installation generates an error: "Windows cannot access the specified device, path or file.

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

  Original title: Windows cannot install the drivers

  I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

  "The process cannot access the file because it is being used by another process".

  Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

  What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

  Hi paco2012,
   
  1. did you of recent changes on the computer?
  2. how many user accounts you have on the computer?
   
  Try these steps and check the result.
  Step 1: Install the driver as an administrator
  a. shut down the computer runs.
  b. start the computer and the connection as an administrator.
  c. find the driver configuration file, right-click on the file and click "Run as Administrator".
  d. follow the instructions in the wizard to install the driver.
  e. restart the computer once the driver is installed.
   
  Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot."
  c. restart the computer.
  d. install the driver and verify the result.
  e. follow "step 7: reset the computer to start as usual.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access internet without going through "Online Help & Support." ("Windows cannot access the specified path. You cannot ot have permission.)

  Problems: Access to the internet.    2. right of PC, for example, clock, Favorites, etc. does not appear on the screen while booting.

  3. cannot access the Micro password

  Error message: «Windows cannot access the path specified...» »

  When I'm online through the icon help & Support, still cannot access all the other icons; needs access to sites through links.

  First of all, there is problem when I played the game on 'brightness (MySpace link); PC seems to crash and the problem has continued since then.

  I have no idea what to do and I'm a bit of a novice.  In addition, have physical difficulties which slows me down or interferes with the ability to work through problems.

  Applications and links of Facebook can be very dangerous. Please start with the basics to ensure that you are working from a clean base. You will need to obtain the tools of a different, known-clean computer with access to the Internet and put them on a USB stick to transfer to the affected machine.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!