vCenter Server Appliance and FT

Can the vCenter Server Appliance reside as a VM in the same cluster FT it manages?

FT is one per VM configuration and you can certainly run another VM - including vCenter Server - in the same cluster HA.

André

Tags: VMware

Similar Questions

  • I did a stupid thing: I suspended "vmware vCenter Server Appliance" and now I can't connect to it more

    Hello

    First some info on our system. We have a group of three hypervisors and a few terabytes of storage on two devices of Synology. VCenter Server allows us to control everything. This vCenter is accessible via a dedicated ip address. Then I opened my 5.5 vSphere client on my workstation, check the name and credentials of the vCenter and hup I can admin everything.

    Now, what I did with my sleepy head? I suspended the so-called "unit of vmware vcenter server. And my vsphere client lost my connection with the server vCenter Server immediately.

    I can't ping this address ip-plus.

    I'm afraid that ssh is disabled.

    Installed on virtual machines seemed well-oiled, I can access it by using RDP. So no worries for employees using them.

    So I would like to be able to restart this device "vmware vcenter server" but I don't know how to do it.

    All useful ideas would be nice.

    And Yes, it's a really stupid mistake.

    Thank you

    Paul

    Point your client vSphere host your vCenter ON VM's.  You can then start the VM vCenter.

  • vCenter Server Appliance and VMware Tools update

    I've just updated VCSA to 5.1.0.10000 build 1065184. I had to uninstall VMware Tools first because the update failed with

    "VMware Tools can not install because it seems that another installation of.

    VMware Tools is already present. Please remove the previous installation and

    then try again to install this version of VMware Tools. »

    error in /opt/vmware/var/log/vami/updatecli.log (I had a similar problem with the previous update).

    After updating, I see in this newspaper:

    "22/05/2013 14:43:48 [INFO] Running/opt/vmware/share/vami/vami_reconfigure_tools.

    VMware tools is not installed on this virtual machine.

    "22/05/2013 14:43:48 [INFO] status update: reconfiguration of done VMware tools.

    Should I install VMware Tools via vSphere Web Client again? I assumed VMware Tools to install update VCSA. I can see the packets in any case:

    VM-vcenter: ~ # rpm - qa | grep-i vmware-tools

    VMware-Tools-vmmemctl-KMP-default-1.2.1.2_3.0.13_0.27-3

    VMware-Tools-vmxnet-KMP-default-2.0.14.0_3.0.13_0.27-3

    VMware-tools-services - 9.0.5 - 1.sles11

    vmware-tools-plugins-hgfsServer-9.0.5-1.sles11

    VMware-Tools-plugins-VMBackup-9.0.5-1.SLES11

    VMware-Tools-VMCI-Common-9.0.5-1.SLES11

    VMware-Tools-vsock-KMP-default-9.3.3.0_3.0.13_0.27-3

    VMware-Tools-Libraries-NOx-9.0.5-1.SLES11

    VMware-Tools-vmmemctl-Common-9.0.1-3

    VMware-tools-core - 9.0.5 - 1.sles11

    vmware-tools-plugins-autoUpgrade-9.0.5-1.sles11

    vmware-tools-plugins-guestInfo-9.0.5-1.sles11

    vmware-tools-plugins-powerOps-9.0.5-1.sles11

    VMware-Tools-plugins-VIX-9.0.5-1.SLES11

    VMware-Tools-ESX-kmods-default-9.0.5-1.SLES11

    VMware-Tools-vmxnet-Common-9.0.5-1.SLES11

    VMware-Tools-VMCI-KMP-default-9.3.18.0_3.0.13_0.27-3

    VMware-tools-guestlib - 9.0.5 - 1.sles11

    vmware-tools-plugins-deployPkg-9.0.5-1.sles11

    vmware-tools-plugins-timeSync-9.0.5-1.sles11

    VMware-Tools-ESX-NOx-9.0.5-1.SLES11

    VMware-Tools-vsock-Common-9.0.5-1.SLES11

    VMware-tools-Foundation - 9.0.5 - 1.sles11

    But I can not start the daemon:

    VM-vcenter: ~ # /etc/init.d/vmware-tools-services start

    From an operating system daemon invited VMware Tools: failure

    After the assumption, I deleted/usr/lib/vmware-tools/lib / and was able to run vmware - install.pl and install VMware Tools 9.0.1.18551 (build 913578) then.

    I'm still confused why vmware-tools-services - 9.0.5 - 1.sles11 and other packages installed during the VCSA update did not work.

  • Open connections of hosts and vCenter Server Appliance

    We have number of ESXi hosts configured in our environment with vCenter 5.1, far ssh is open to all in order to access all hosts via SSH. Although authenticating the users available but, even then, the issue raises so bound / restrict administrators IPs or subnet of the network for security reasons. Will be the same for vCenter Server Appliance.

    Also can we restriction of IP level for the Vmware Client users, good that now everyone can make the connection between vSphere and vCenter cleint. Please advice

    Hi friend

    Please see below the resources needed to achieve the same on ESXi

    http://www.definit.co.UK/2013/10/vSphere-Security-Advanced-SSH-configurations/

    Restrict access to the ESXi host Console - see the lock Mode. VMware vSphere Blog - VMware Blogs

    Limit the vSphere Client access to IP or network - Firewall 5 ESXi & raquo; System administrators

  • How to change the config of vCenter Server Appliance (5.5) ESXi host vm? [Solved]

    I want to enable (set to true) memoryHotAddEnabled and cpuHotAddEnabled on the vCenter Server Appliance.

    I can't the powerCLI user because he needs a vCenter Server Appliance to connect to (right?) and to allow HotAdd of the virtual machine must be turned off.

    For anyone wondering, the best way to do this is to connect the ESXi host via vSphere Client, turn off the VM vCenter and update the configuration in this way.

  • VCenter Server Appliance 5.5 update w/o VUM

    I'm Manager my first vmware environment. We are a small company and using the Essentials package. I have two hosts upward with a vCenter Server Appliance 5.5 Build 2063318. I'm looking for a way to update the device for security patches. I have not been able to find how to do that when we don't have a Manager Update server configuration. I downloaded the .iso file but have not been able to find all the commands that will allow me to manually install the package. Any help is greatly appreciated.

    Note that you must connect vCenter Server Appliance Web Console (VAMI) address: https://vCenterServerIPAddress:5480/ NOT the vSphere Web Client that listens on a different port.

  • A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

    Hello gentlemen,

    I can not only save this virtual machine with Backup Exec 2014 for a long time.

    They are there was no snapshot in snapshot Manager.

    Could you help me?

    A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

    V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

    A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

    V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

    Hello

    I found the solution.

    I disabled the JOB BE general relativity.

    and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

    I did and now there works.

    I think that the problem can come from this.

  • Location of the vCenter vCEnter Server Appliance 6.0.0 vs Linux plugin file

    We have a plugin where we were using vCenter 6.0 hosted on a Linux server.  I could get my plugin files in /var/lib/vmware/vsphere-client/vc-packages/vsphere-client-serenity and /import/storage.

    We then deployed a vCenter Server Appliance 6.0.0 our plugin and it has a different directory structure.  The structure of directory changes to /var/lib/vmware.

    Where can I find the folder of vsphere-client-serenity or its equivalent.

    Or plugins to treat device unlike a vCenter 6.0 linux host?


    Thank you.

    I found it in/etc/vmware/vsphere-client/vc-packages/vsphere-client-serenity

  • VMware vCenter Server Appliance 5.1 is not Autostart cluster

    Problem:

    After a VMware vCenter Server Appliance failure does not start automatecly.

    I have configured to start automatecly to each host, but it does not start automatecly.

    My configuration:

    Shared infrastructure-plate-forme PowerEdge VRTX with 3 servers running

    -3 x VMware ESXi 5.1.0 (799733)

    -1 x VMware vCenter Server Appliance 5.1

    -Servers run as a cluster with HA.

    Unfortunately Autostart VM is not supported in a Cluster, and so the settings are ignored. VM in clusters must be turned on manually (or using a script,...).

    André

  • vCenter Server Appliance "URL of repository" evil

    Hey guys,.

    new to this entire VMware environment.

    I am trying install Win Server 2012 and in order to get installed it, I understand that I have to update my current version to 5.0.0 VMware - 455964 I have for later. I was hoping that it would accomplish this by accessing the VMware vCenter Server Appliance in the section "Update." But when I hit 'check updates' I get a:

    Impossible to check updates (error update server being contacted. Please check the network configuration. Couldn't resolve host ' VAPP - updates.vmware.com' URL: http://vapp-updates.vmware.com/vai-catalog/valm/vmw/8e70f769-fd50-4a7a-bee2-2c0d945e23b0/5.0.0.3324.latest/manifest/manifest-latest.xml) on Friday, June 20, 2014 3:02:21 PM GMT - 04:00


    Error...


    So I try to figure out how to invite to get the URL and (current) right to check with success to FIND an update. And if all goes well install it...


    What may be a DNS issue? If so, I have not found a place for the DNS entry. Must be outside of the server appliance?


    Can you help me? Let me know what else I might need to provide to you guys to get somewhere with my question


    Thank you


    lookush

    To configure DNS on the vCSA change the Type of address to SLAAC-IPv6 first and you can add DNS server address and the host name.

    Check this blog for more information: How to configure the vSphere 5 vCenter Server Appliance

  • If the patch management can be done by VMware Update Manager in vCenter Server Appliance as similar vCenter Server

    Hi friends,

    If patches of the host management can be done through Vmware Update manager vCenter Server Appliance as in vCenter Server.

    Tell me other differences between them...

    Kind regards

    Sirot Vijay

    1. Yes we can connect to the device using the vSphere client.

    2. in the installation of the update manager VCenter information will ask and he will automatically fit no special measures required.

    3. no conflict. Its just like you have two vCenter servers, but you can not have two server vCenter managing the same hosts.

    -Avinash

  • default connection of vCenter Server Appliance no longer works?

    Hello

    We had installed 5.5.0.5201 VCA and works very well for a while now. At any given time in the last 24 hours the reason, the default root | VMware connection fails to work?

    Domain creds for vClient still works, but we are unable to connect to the actual device.

    Not quite what our options are, or why this happened!

    You may have hit the expiration of the default root account which is 90 days.

    alert vcenter Server Appliance 5.5 root account password has expired. virtXpress

  • How to upgrade vCenter Server Appliance 5.5 to 5.5 Update 1

    Hi, just wanted to know how to upgrade vCenter Server Appliance 5.5 to 5.5 Update 1. Is it with Crossover?

    Hello

    Connect to your device from vCenter:

    https:// : 5480

    Click on the update tab,

    Check the updates and then install updates.

    Takes a long time. Restart when it's over.

    And you're done

    Tim

  • Activate the VCA Mode of VMware vCenter Server Appliance

    Hello

    I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

    I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

    How can I activate CVS when vSphere does not work?

    Thank you

    Jeff

    Hi Welcome to the communities,

    This one is a bit complicated

    You have:

    1. turn off all VMs on Host1 (while vCenter device is on Host2)

    2 bring Host1 on Cluster, select CVS clustered.

    3. put all the virtual machines on Host2 (also vCenter device)

    4. connect on Host2 directly to vSphere Client Windows

    5. remove the vCenter inventory unit

    6. connect on Host1 directly to vSphere Client Windows

    7. the data store when the appliance and add it to the inventory of research. Power on

    8. connect the device with Web client or vSphere vCenter

    9. move the second host in the cluster

    And you're done

    Concerning

    Tim

  • VMWare vCenter Server Appliance / 2012R2 Windows domain

    Hi all
    I've recently updated my domaincontrollers to R2 2012 WIndows, and I installed vCenter on a vm through the ovf appliance. After you have configured the vCenter in the web gui, I can join the domain successfully and the virtual center appears in the field. After a restart of the virtualcenter, I'm not able to find the field in the client to vcenter under permissions. (version vCenter: VMware-vCenter-Server-Appliance-5.5.0.5101-1398493)

    Someone at - it a tip on how to fix this?

    You must login to webclient using [email protected] and navigate to the SSO configuration. Select your ad that you added and make this default domain. This makes the announcement should appear in the menu drop-down.

Maybe you are looking for