vCenter Server Appliance "URL of repository" evil

Similar Questions

• How to change the config of vCenter Server Appliance (5.5) ESXi host vm? [Solved]

  I want to enable (set to true) memoryHotAddEnabled and cpuHotAddEnabled on the vCenter Server Appliance.

  I can't the powerCLI user because he needs a vCenter Server Appliance to connect to (right?) and to allow HotAdd of the virtual machine must be turned off.

  For anyone wondering, the best way to do this is to connect the ESXi host via vSphere Client, turn off the VM vCenter and update the configuration in this way.

• VCenter Server Appliance 5.5 update w/o VUM

  I'm Manager my first vmware environment. We are a small company and using the Essentials package. I have two hosts upward with a vCenter Server Appliance 5.5 Build 2063318. I'm looking for a way to update the device for security patches. I have not been able to find how to do that when we don't have a Manager Update server configuration. I downloaded the .iso file but have not been able to find all the commands that will allow me to manually install the package. Any help is greatly appreciated.

  Note that you must connect vCenter Server Appliance Web Console (VAMI) address: https://vCenterServerIPAddress:5480/ NOT the vSphere Web Client that listens on a different port.

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• Location of the vCenter vCEnter Server Appliance 6.0.0 vs Linux plugin file

  We have a plugin where we were using vCenter 6.0 hosted on a Linux server.  I could get my plugin files in /var/lib/vmware/vsphere-client/vc-packages/vsphere-client-serenity and /import/storage.

  We then deployed a vCenter Server Appliance 6.0.0 our plugin and it has a different directory structure.  The structure of directory changes to /var/lib/vmware.

  Where can I find the folder of vsphere-client-serenity or its equivalent.

  Or plugins to treat device unlike a vCenter 6.0 linux host?

  
  

  Thank you.
  

  I found it in/etc/vmware/vsphere-client/vc-packages/vsphere-client-serenity

• Setting up Certification Authority (CA) signed certificates for vCenter Server Appliance 6

  Hi all

  Recently, I managed to migrate to vCenter Server Appliance 6. 5.5, there was a large KB (2057223) on Configuring Certificate Authority (CA) signed certificates for vCenter Server Appliance. I tried to do as it says configure the certificate for v6.

  Unfortunately, I understand that some services such as lighttpd are changed in version.

  Can anyone provide a new instruction for the v6?

  Thank you

  Thank you. That helped me to see the idea. However, the explanation in the pages that was not complete. I had to search for more.

  This blog helped me solve my problem with the generated certificate:

  http://longwhiteclouds.com/2015/03/22/vSphere-6-using-Vmca-as-a-subordinate-CA/

• VMware vCenter Server Appliance 5.1 is not Autostart cluster

  Problem:

  After a VMware vCenter Server Appliance failure does not start automatecly.

  I have configured to start automatecly to each host, but it does not start automatecly.

  My configuration:

  Shared infrastructure-plate-forme PowerEdge VRTX with 3 servers running

  -3 x VMware ESXi 5.1.0 (799733)

  -1 x VMware vCenter Server Appliance 5.1

  -Servers run as a cluster with HA.

  Unfortunately Autostart VM is not supported in a Cluster, and so the settings are ignored. VM in clusters must be turned on manually (or using a script,...).

  André

• Open connections of hosts and vCenter Server Appliance

  We have number of ESXi hosts configured in our environment with vCenter 5.1, far ssh is open to all in order to access all hosts via SSH. Although authenticating the users available but, even then, the issue raises so bound / restrict administrators IPs or subnet of the network for security reasons. Will be the same for vCenter Server Appliance.

  Also can we restriction of IP level for the Vmware Client users, good that now everyone can make the connection between vSphere and vCenter cleint. Please advice

  Hi friend

  Please see below the resources needed to achieve the same on ESXi

  http://www.definit.co.UK/2013/10/vSphere-Security-Advanced-SSH-configurations/

  Restrict access to the ESXi host Console - see the lock Mode. VMware vSphere Blog - VMware Blogs

  Limit the vSphere Client access to IP or network - Firewall 5 ESXi & raquo; System administrators

• If the patch management can be done by VMware Update Manager in vCenter Server Appliance as similar vCenter Server

  Hi friends,

  If patches of the host management can be done through Vmware Update manager vCenter Server Appliance as in vCenter Server.

  Tell me other differences between them...

  Kind regards

  Sirot Vijay

  1. Yes we can connect to the device using the vSphere client.

  2. in the installation of the update manager VCenter information will ask and he will automatically fit no special measures required.

  3. no conflict. Its just like you have two vCenter servers, but you can not have two server vCenter managing the same hosts.

  -Avinash

• default connection of vCenter Server Appliance no longer works?

  Hello

  We had installed 5.5.0.5201 VCA and works very well for a while now. At any given time in the last 24 hours the reason, the default root | VMware connection fails to work?

  Domain creds for vClient still works, but we are unable to connect to the actual device.

  Not quite what our options are, or why this happened!

  You may have hit the expiration of the default root account which is 90 days.

  alert vcenter Server Appliance 5.5 root account password has expired. virtXpress

• How to upgrade vCenter Server Appliance 5.5 to 5.5 Update 1

  Hi, just wanted to know how to upgrade vCenter Server Appliance 5.5 to 5.5 Update 1. Is it with Crossover?

  Hello

  Connect to your device from vCenter:

  https:// : 5480

  Click on the update tab,

  Check the updates and then install updates.

  Takes a long time. Restart when it's over.

  And you're done

  Tim

• Activate the VCA Mode of VMware vCenter Server Appliance

  Hello

  I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

  I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

  How can I activate CVS when vSphere does not work?

  Thank you

  Jeff

  Hi Welcome to the communities,

  This one is a bit complicated

  You have:

  1. turn off all VMs on Host1 (while vCenter device is on Host2)

  2 bring Host1 on Cluster, select CVS clustered.

  3. put all the virtual machines on Host2 (also vCenter device)

  4. connect on Host2 directly to vSphere Client Windows

  5. remove the vCenter inventory unit

  6. connect on Host1 directly to vSphere Client Windows

  7. the data store when the appliance and add it to the inventory of research. Power on

  8. connect the device with Web client or vSphere vCenter

  9. move the second host in the cluster

  And you're done

  Concerning

  Tim

• VMWare vCenter Server Appliance / 2012R2 Windows domain

  Hi all
  I've recently updated my domaincontrollers to R2 2012 WIndows, and I installed vCenter on a vm through the ovf appliance. After you have configured the vCenter in the web gui, I can join the domain successfully and the virtual center appears in the field. After a restart of the virtualcenter, I'm not able to find the field in the client to vcenter under permissions. (version vCenter: VMware-vCenter-Server-Appliance-5.5.0.5101-1398493)

  Someone at - it a tip on how to fix this?

  You must login to webclient using [email protected] and navigate to the SSO configuration. Select your ad that you added and make this default domain. This makes the announcement should appear in the menu drop-down.

• VMware vCenter Server Appliance 5.5 Active Directory domain are not under permissions

  Hey,.

  I use VMware vCenter Server Appliance 5.5.

  All Services are running correctly:

  

  I configured tge under authentication to Active Directory Service:

  

  But when I try to give permissions for groups and users to the AD.

  But it is not listed in the vsphere Client and WebGUI

  

  

  Can someone help me solve this problem?

  Are there any newspaper I can verify or any idea to check this?

  You will need to go to your SSO Configuration and set your ad as default domain.

  

  Once you do this, it will be displayed in the list.

• VCSHB 6.5.1 does support vCenter Server Appliance

  Hello

  Does anyone know if vCSHB 6.5.1 vCenter Server Appliance supports? If so, is there a VMware documentation on that? Thank you!

  No, vCSHB does not support the vCenter Server Appliance, it supports only the windows version.