VCSHB 6.5.1 does support vCenter Server Appliance

Similar Questions

• VCSHB 6.5.1 does support vCenter Server 5.5 (or vSphere 2013)

  Hello

  VCSHB 6.5.1 does support vCenter Server 5.5 (or vSphere 2013)? If not, what VMware will be released the next version of vCSHB which offers support

  vCenter Server 5.5? Thank you!

  No, vCSHB 6.5.1 came out this spring and can't stand the vCenter 5.5 with its new SSO.

  vCSHB 6.6 will support it.

• How does VMware vCenter Server Heartbeat communicate?

  How does VMware vCenter Server Heartbeat communicate?

  VMware vCenter Server Heartbeat supports configurations of single NIC or multi.

  Public IP address: this IP address is used by a client to connect to an Active Server, and move between the secondary and primary servers in the case of a failover or a passage.

  IP address of the channel: this is for communication between active and passive servers. This is used for the transfer of control and an asset to the passive server data and monitoring the State of an Active Server.

  In a LARGE network, static routes are used on switches to maintain ongoing communication.

  Management IP address: this address is used to access servers in a passive role. In a multi NETWORK card configuration, a NIC will have IP addresses public and management, and an another aura NIC IP address of channel. In a single NETWORK adapter configuration, all IP addresses are on the same network adapter.

• VCenter Server Appliance fails without VT in nested ESXi 5.1 support

  I am trying to run vCenter Server Appliance in a nested ESXi 5.1 64-bit environment.

  At the start of the vCenter Server Appliance, it fails with:

  This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.

  This host does not support VT for more information, see http://VMware.com/info?id=152 .

  My configuration is:

  Hardware Intel Serverboard S1200BTS

  Intel Xeon E3-1230 V2 3.30 GHZ CPU

  (This processor supports VT + EPT)

  BIOS Intel VT is enabled

  Intel VT for directed IO is enabled

  Latest version of the BIOS

  HW-ESXI 5.1 vhv.allow = "TRUE" is defined

  VM-ESXi 5.1 CPU/MMU virtualization - Intel VT + EPT active

  vCenter Server Appliance has been installed with the VMware-vCenter-Server-Appliance-5.1.0.5200-880472_OVF10.ova file.

  What I'm missing here?

  MNGZ wrote:

  Set vhv.enable = 'TRUE' in my nested ESXi 5.1 makes no difference.

  Did you put this in the .vmx file for your ESXi 5.1 VM?

• Is - it possible/supported to join a vCenter Server Appliance for a Small Business Server 2011 Active Directory Windows?

  Hello experts,

  I wonder if it's possible/supported to join the vCenter Server Appliance for a small business 2011 Active Directory Windows Server (basically a Microsoft Windows Server 2008 R2 Active Directory).

  Any help will be greatly appreciated.

  Thank you and best regards,

  Massimiliano

  You can... However, it would be, at least in what we saw, more easy to reach the device in the announcement via the CLI

  http://KB.VMware.com/kb/2002626

• VMware vCenter Server Appliance 5.1 is not Autostart cluster

  Problem:

  After a VMware vCenter Server Appliance failure does not start automatecly.

  I have configured to start automatecly to each host, but it does not start automatecly.

  My configuration:

  Shared infrastructure-plate-forme PowerEdge VRTX with 3 servers running

  -3 x VMware ESXi 5.1.0 (799733)

  -1 x VMware vCenter Server Appliance 5.1

  -Servers run as a cluster with HA.

  Unfortunately Autostart VM is not supported in a Cluster, and so the settings are ignored. VM in clusters must be turned on manually (or using a script,...).

  André

• Activate the VCA Mode of VMware vCenter Server Appliance

  Hello

  I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

  I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

  How can I activate CVS when vSphere does not work?

  Thank you

  Jeff

  Hi Welcome to the communities,

  This one is a bit complicated

  You have:

  1. turn off all VMs on Host1 (while vCenter device is on Host2)

  2 bring Host1 on Cluster, select CVS clustered.

  3. put all the virtual machines on Host2 (also vCenter device)

  4. connect on Host2 directly to vSphere Client Windows

  5. remove the vCenter inventory unit

  6. connect on Host1 directly to vSphere Client Windows

  7. the data store when the appliance and add it to the inventory of research. Power on

  8. connect the device with Web client or vSphere vCenter

  9. move the second host in the cluster

  And you're done

  Concerning

  Tim

• Download link for vCenter Server Appliance (Linux)

  Hello

  I have the following situation: we bought VMware this week for our internal servers and want to administer the virtual machines with Linux (and only with Linux).

  I downloaded VMware-vCenter-Server-Appliance-5.1.0.10000-1065184_OVF10.ova and imported this virtual machine. I can now administer all our virtual machines within a browser running on a linux client.

  This virtual machine is running SUSE Linux Enterprise 11 (64-bit) and I would like to download these packages install to put in place a dedicated linux server (vShpere Web Client Version 5.1.0 build 1063329, customer-integrations-Plug-Ins: VMRC Version 5.1.0 Build 1060398 and Support Client Version 5.1.0 Build 832030)

  I downloaded tons of ISOs and OVF from VMware today but found nothing to install on a Linux server dedicated (except these tools of comments).

  Can we put a link or give me a clue where to download or in what ISO is?

  And another question is: is it possible to install

  Thank you

  Bernd

  The Linux version of vCenter Server is only available as a Virtual Appliance that you downloaded and not as a separate package such as the version of Windows.

  André

• How to change the config of vCenter Server Appliance (5.5) ESXi host vm? [Solved]

  I want to enable (set to true) memoryHotAddEnabled and cpuHotAddEnabled on the vCenter Server Appliance.

  I can't the powerCLI user because he needs a vCenter Server Appliance to connect to (right?) and to allow HotAdd of the virtual machine must be turned off.

  For anyone wondering, the best way to do this is to connect the ESXi host via vSphere Client, turn off the VM vCenter and update the configuration in this way.

• VCenter Server Appliance 5.5 update w/o VUM

  I'm Manager my first vmware environment. We are a small company and using the Essentials package. I have two hosts upward with a vCenter Server Appliance 5.5 Build 2063318. I'm looking for a way to update the device for security patches. I have not been able to find how to do that when we don't have a Manager Update server configuration. I downloaded the .iso file but have not been able to find all the commands that will allow me to manually install the package. Any help is greatly appreciated.

  Note that you must connect vCenter Server Appliance Web Console (VAMI) address: https://vCenterServerIPAddress:5480/ NOT the vSphere Web Client that listens on a different port.

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• Location of the vCenter vCEnter Server Appliance 6.0.0 vs Linux plugin file

  We have a plugin where we were using vCenter 6.0 hosted on a Linux server.  I could get my plugin files in /var/lib/vmware/vsphere-client/vc-packages/vsphere-client-serenity and /import/storage.

  We then deployed a vCenter Server Appliance 6.0.0 our plugin and it has a different directory structure.  The structure of directory changes to /var/lib/vmware.

  Where can I find the folder of vsphere-client-serenity or its equivalent.

  Or plugins to treat device unlike a vCenter 6.0 linux host?

  
  

  Thank you.
  

  I found it in/etc/vmware/vsphere-client/vc-packages/vsphere-client-serenity

• Setting up Certification Authority (CA) signed certificates for vCenter Server Appliance 6

  Hi all

  Recently, I managed to migrate to vCenter Server Appliance 6. 5.5, there was a large KB (2057223) on Configuring Certificate Authority (CA) signed certificates for vCenter Server Appliance. I tried to do as it says configure the certificate for v6.

  Unfortunately, I understand that some services such as lighttpd are changed in version.

  Can anyone provide a new instruction for the v6?

  Thank you

  Thank you. That helped me to see the idea. However, the explanation in the pages that was not complete. I had to search for more.

  This blog helped me solve my problem with the generated certificate:

  http://longwhiteclouds.com/2015/03/22/vSphere-6-using-Vmca-as-a-subordinate-CA/

• vCenter Server Appliance "URL of repository" evil

  Hey guys,.

  new to this entire VMware environment.

  I am trying install Win Server 2012 and in order to get installed it, I understand that I have to update my current version to 5.0.0 VMware - 455964 I have for later. I was hoping that it would accomplish this by accessing the VMware vCenter Server Appliance in the section "Update." But when I hit 'check updates' I get a:

  Impossible to check updates (error update server being contacted. Please check the network configuration. Couldn't resolve host ' VAPP - updates.vmware.com' URL: http://vapp-updates.vmware.com/vai-catalog/valm/vmw/8e70f769-fd50-4a7a-bee2-2c0d945e23b0/5.0.0.3324.latest/manifest/manifest-latest.xml) on Friday, June 20, 2014 3:02:21 PM GMT - 04:00

  
  

  Error...

  
  

  So I try to figure out how to invite to get the URL and (current) right to check with success to FIND an update. And if all goes well install it...

  
  

  What may be a DNS issue? If so, I have not found a place for the DNS entry. Must be outside of the server appliance?

  
  

  Can you help me? Let me know what else I might need to provide to you guys to get somewhere with my question

  
  

  Thank you

  
  

  lookush
  

  To configure DNS on the vCSA change the Type of address to SLAAC-IPv6 first and you can add DNS server address and the host name.

  Check this blog for more information: How to configure the vSphere 5 vCenter Server Appliance

• Open connections of hosts and vCenter Server Appliance

  We have number of ESXi hosts configured in our environment with vCenter 5.1, far ssh is open to all in order to access all hosts via SSH. Although authenticating the users available but, even then, the issue raises so bound / restrict administrators IPs or subnet of the network for security reasons. Will be the same for vCenter Server Appliance.

  Also can we restriction of IP level for the Vmware Client users, good that now everyone can make the connection between vSphere and vCenter cleint. Please advice

  Hi friend

  Please see below the resources needed to achieve the same on ESXi

  http://www.definit.co.UK/2013/10/vSphere-Security-Advanced-SSH-configurations/

  Restrict access to the ESXi host Console - see the lock Mode. VMware vSphere Blog - VMware Blogs

  Limit the vSphere Client access to IP or network - Firewall 5 ESXi & raquo; System administrators