VCenter Server installation on a computer that is running IIS

Similar Questions

• Is anyone know the device driver network right to install on a Hewlett Packard desktop computer that is running Windows XP Professional 2002?

  The network for computer device driver installation

  Did anyone know the right network device driver to install on a Hewlett Packard desktop computer that is running Windows XP Professional 2002 and he seems to have a processor Intel Pentium CPU RF?

  You can start here:

  http://WWW8.HP.com/us/en/support-drivers.html
  You know do. But you must also give us the model and model number!
  Example:
  HP Pavilion a6827c
  A guide on finding drivers:
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=bph07165
  More information:
  Guide to finding your product number

• How can I get networked computers running XP in order to use a printer that is connected to a computer that is running 7?

  How networked computers running XP home can use a printer (hp laserjet 3030) which is connected to a computer that is running 7 pro 64-bit?

  Seems there is a driver problem but I downloaded the driver several times and no luck. Telling me the wrong driver is installed.

  Firewall is also disabled.

  Printer is shared.

  I am far from a networker, so lame mans terms = please) thanks

  Hello

  These should help:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I want to restore my hp desktop computer that is running windows vista edition Home premium

  I want to restore my hp desktop computer that is running windows vista edition Home premium, but I don't have the cd and when I try it files through the windows there not a correct restore date.  can someone help me?

  Hello

  You're confused system recovery and system restore.

  System Restore makes the settings from your computer to an earlier date; It will not reinstall the operating system.

  System recovery reinstalls the operating system how much you bought your machine; as for the new State.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  You can reinstall by the HP Recovery Manager if your computer is still running or by pressing F11 at startup.

  You can also make your own recovery discs.

  All these information are the included HP link.

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.

• I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshoppowers upward but then gets off by Win

  Question? I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshop turns on but gets so turned off by Windows 10. V. frustrating - what can I do?

  What version of Photoshop? have you tried to do a right-click on the icon and selecting run as administrator

• I can't install CC as well on a computer running Windows and a computer that is running with Mac OS El Capitan? Or is that something will be changed for download to a Mac?

  I can't install CC as well on a computer running Windows and a computer that is running with Mac OS El Capitan? Or is that something will be changed for download to a Mac?

  Hello

  CC Adobe license can be activated on 2 machines using the same Adobe ID.

  They can be 2 Windows Mac 2 or equal to 1; Setup is the same.

  Kind regards

  Sheena

• CS5 does not work on the new computer that is running Windows 7

  I initially installed my CS5 on a computer running Windows Vista and it worked great. I just got a new computer that is running Windows 7, installed my Adobe Photoshop Elements & CS5 on it, but now it is not working properly. When I click on the triangle to the right at the bottom of any tool, it does not to show the various tools as before. Does anyone else have this problem? If so, how to solve it? Thanks in advance for any help you can give!

  Hi FireSpiritDesigns,

  There are two ways to access the tools hidden in your toolbar in Photoshop:

  • Press and hold down the mouse button on a tool that has hidden tools behind it and a window will appear to the right of you show the other available tools.
  • ALT-click Windows or Option, click on a Mac on a tool to jump out the window that shows the hidden tools available.

• Will there be traps to vCenter Server installation on a host in a cluster that is already managed by another server vCenter Server?

  I guess that the first answer, I'll be back will be; Why?

  Our Organization has decided that the team of UNIX and the Windows team cannot share a single server vCenter Server that manages the environment. This is why the Windows team has offered a virtual computer in which we installed vCenter Server and then we can create our environment from there.

  Yes, I already read the doco on the creation of a virtual machine via the Client vSphere on an ESXi host we manage already. It's a viable option, but server 2008r2 should again be a picture they have made.

  I watched the vCenter Server appliance for linux, but from what I can tell that would be too small for our environment and is not supported for Symantec Appha.

  Yes, it would be nice if we could all play nice, but mgmt don't we have to so that's where we are.

  The ideas and concerns would be useful...

  Thank you!

  I see - it's just an unusual set of circumstances. As long as the virtual machine has network connectivity, it should work. It would be really no different than having a physical server with vCenter running on it.

• A domain on the server vCenter Server installation causes vCenter Server fails to start

  Hi guru,.

  Well I tried for a while, to get my vCenter Server to work with my newly created domain name and at least i did not have much luck. It seems that every time that

  I have create a new domain and restart the system. For the VirtualCenter Server service fails to start on reboot. I checked my odbc connection and test works very well.

  I am able to log in microsoft management studio without problem. But still, the service does not start I understand I can meet here, it's probably a

  with my database permissions issue.  However I can't seem to find the answer by myself if I m hoping to hear some suggestions from all of you who help on this.

  Thanks for the replies!

  Sean

  Uh, you have not installed vCenter on the same server that is running your domain controller you have?

  ADAM and cannot run on the same machine AD.

  If it is installed on the same computer that your DC - get a new machine for VC - this configuration will never work. (minimum supported ram is 3 GB.)

  We see in the newspapers that ADAM is not from, and that's why VC fails to start as well.

  Failed to get all pages of search results: 0xa (a reference was returned by the server).

  Couldn't find OU = container of Instances.  This may indicate a problem with the LDAP permissions for the execution account VirtualCenter, or that the schema is not compatible with this version of VirtualCenter.

  Unable to run the search for the instance

• VUM on Production vCenter Server installation

  Hello

  The person VUM which configure vCenter before me it takes, never installed. I am wanting to install to ensure that my esxi hosts are patched and up to date, but he was eager to know if there was any danger to install on the vCenter server when it is already in production?

  Thank you.

  not necessary if you host in the physical only. You can virtualize it.

  Otherwise, if you don't have a large environment as you can build locally with vcenter. but make sure that the frequency to check and download updates should be smaller than twice or three times in 24 hours in order to avoid any additional workload in vcenter. Otherwise all good.   Good luck.

• on AD and DNS requirement in vCenter server installation

  Hello, I am facing installation stuffs now. It's about installation vCenter server 5.5 under windows.

  I'm just in my lab. He went well when I installed vCenter server device and I can do the remaining animals vSphere.

  But this time I must try to use vCenter in windows. I'm stuck in the 'server URL search"in installing vCenter.

  Is it OK to install the vCenter without AD and DNS server as I do now. If this isn't the case, pls guide me.

  You must at least COMPLETE your vCenter server field cannot be resolved and if you do not have DNS server in your lab, try to configure the host files... and on the announcement, if you do not have Active Directory domain or the vCenter Server belongs to a workgroup, not all features are available.

  To see a list of the software requirements and best practices for installing vCenter Server, check this KB: article: installation vCenter Server 5.5 recommended (2052334)

• HP ML115G1 and vCenter Server installation

  Hi all

  Please go easy on me because it's my first time with VMware

  I have a ML115G1 with 5 GB RAM and 120GB HD, installed ESXi 4.1 and have a VM of Windows 2008 Server SP2 running no problem, I want to learn vCenter Server among others and tried to install it in this virtual machine, as I quickly discoveredvCentre requires 2CPUs which are at least 2 GHz, assuming that I understand it so far and I am not , what is the best way forward for me so that I can learn Vcenter in the following environment:

  1 x Windows Server 2008R2 Virtual machine with vCenter, domain AD etc.

  2 x Windows Server 2008 R2 running SQL2008 and center of System Configuration Manager

  2 x windows xp or win 7 clients

  assuming that I have very little $ to purchase a new high spec server to deal with all this and its only in a lab environment. What is the best way to go to implement, it will be used for myself training on products above, trials of software distribution, patch deployment, management of client of windows etc.

  Any help will be greatly appreciated as Im in its early days and theres a heck of a lot to!

  Thank you very much

  No, it should still install - it's just the 2 GHz is recommended and if I remember anything in the Setup goes and checks the closk speed -.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• When I installed the web client vsphere using vcenter server iso, encounted an error that the vcenter server signon administrateu use name and password is invalid

  VCenter server is version 5.1 and this server is a member of the working group.

  It comes to my administrator:

  

  So, I used ISO server vcenter and installed web client pulg-in vsphere, it prompted:

  I've used many ways, but failed.

  usernme:admin@system-domain,

  so, I do not know how to solve, and I only know this administrator password.

  I'm not vCenter sign the only to have another admin, please help.

  

  and another question: how install and configure the data via the vsphere 5.1 customer protection, vsphere isn't vsphere web client.

  You must provide credentials for the user admin@system-domain.

• vCenter Server Installation Warning Message

  Why every time installing vCenter server shows this message

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2014317

• vCenter Server service does not start after you run Windows updates

  On a regular basis, my vCenter Server service fails to start after the automatic updates of windows are applied.  The vCenter server is a datacenter 2008R2 VM.

  The only other running applications are PerfectDisk and agents of ESET NOD32 - vCenter is in 4.1.  I tried to adjust the vCenter Server and WedAdmin service of delayed start, but that doesn't seem to make a big difference. The following errors are displayed in the case of the newspaper which lead me to think the issue is related to SQL:

  SQL Server is not ready to accept new client connections. Wait a few minutes and try again. If you have access in the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again.  CUSTOMER:: 1

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  Anyone encountered this before?

  Hello.

  I didn't know this, but the info in Ko 1007669 may be useful.

  Good luck!