vCenter Service overall health from "yellow" to "red".
Hello
Lately, we sometimes receive from operating e-mail alerts manager as the above title has changed from yellow to red, or red to yellow.
It's strange because nothing seems to be wrong.
When you look at the details of the alert there is only a mention that we need to check the vCenter management webservice, but this one is running.
Any idea?
It's health, reported by VC itself.
You can check in VI-client: Home-> vCenter Service status
also, you will see why it is not 'green', and what needs to be fixed.
The fault will disappear once the health is in the 'green '.
See attached snapshot of VI-client
Tags: VMware
Similar Questions
-
vCenter 5.1 Health Status Changed alarm
I have a vCenter server that occationally get an alarm status health (pass from green to red) changed, but I can't understand what it refers. I've looked through the vms, hosts and plugins and can't find any other alarm that could have triggered it could cause.
Nobody knows what he is referring?
Thank you
Matt
Go-> vCenter Home-> Select health of vCenter status and see if there is anything in red or yellow
-
vCenter service stopped after failing on DB
I run vcenter 6.0 on an active/passive cluster of SQL
When I switched my db from one to the other, vcenter service was stopped. I had to start it manually
no idea why?
Yes, that's what says KB, see:
Set the parameter recoverForAllError to true:
true
...
Note: Add the entry above, if it is not present in vpxd.cfg file.
-
Hello
Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.
vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError
Thank you
John
Hi John,.
This is due to host on the vCenter server entries. Please try the procedure below
Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad
C:\Windows\System32\drivers\etc\hosts
# 127.0.0.1 localhost
Note: If a line does not exist in the hosts file, add it at the end of the text.
#) to remove the comment from the line of IPv4.
- 127.0.0.1 localhost
· Save and close the file.
- localhost127.0.0.1.
- GoTo services.msc and start VMware Virtual Center Services.
Thank you
Venance
- 127.0.0.1 localhost
-
VCenter Service does not start after changing the port number
Hi all
Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.
Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.
I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.
Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.
Thank you
Nirmal
If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.
-
Yellow and red color bars through images of the iPhone
Whenever I'm editing of images from my iPhone, playback and export ends up being a nightmare! Whenever I stop while the bars translucent edition, yellow and Red appear on the video and after the final export, the flashing notice (but only on some clips).
I can't understand this at all. If I have pre-made effects in the timeline panel, the bars appear on some images in playback mode.
Siena is a screenshot of the bars I'm talking about!
Thanks for any help!
Disable the MPE material, which will deal with the issue.
-
Hello
I'm under vCenter 5.0 U1 and my database is on a SQL Server 2008 Cluster, use Windows authentication.
Whenever my SQL team switches the server, the vCenter service stops. This causes quite the headache from my backup software requires is configured to retrieve virtual machines via vCenter.
Someone at - he never see cela or know a solution?
THX
Mike
First of all, I would like to point out the race vCenter on Cluster SQL is not fully supported and VMware Support on best efforts basis.
I've seen most of the time a manual intervention is required to start the return services after cluster failover
Check the options for high availability of the server vCenter supported
-
vCSA vcenter service cannot start
I use the trial version of the device of the VirtualCenter server in our lab are fine POC development.
I can get the deployed ovf and the vcenter server has started.
If I configure the vCSA without changing the hostname, the vcenter service starts and I can access the app from vcenter through VIC, connect my host, etc..
The problem is when I go to change the host name of the application of vcenter just going down the Hill. The embedded DB cannot update tables, vcenter service will not completely start and the vcenter is inaccessible.
I tried removing the drive and redeploying a few times now and not can't find a work around for this.
Any help would be welcome.
Notes: I used the following forum to help you, what helps me it to certain things.
I suggest that configure you the host name and the network before configuring the database.
For example, see http://jreypo.wordpress.com/2011/11/29/vcenter-server-appliance-part-1-configuration-and-deployment/ for a description.
André
-
Hello Sir
customers start the dhcp service, I get an account of 1079 ACE ' the error specified for this service is different from the account specified for other services in the Sun in the same process.
Go to start / all programs / accessories / Run. Type netsh winsock reset catalog , and enter. You may need to restart. See if that fixes the problem.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: the account specified for this service is different from the account specified for other services running in the same process
while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.
Hello
Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.
1. have there been recent changes to the computer before the show?
2. the problem occurs in safe mode with networking?
Please go ahead and follow the steps mentioned and later a update on the State of the question.
Method 1: Wi - Fi and in Windows network connection issues:
Additional information:
The problems of Internet connection:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problemsPlease follow these recommended steps and post if you still experience the problem.
-
Windows Installer service is missing from my Vista 32 bit SP2. How can I re - install Windows Installer? None of the 27 sets of update and Installer Cleanup solutions worked, a last resort option could work but it will not install without the Windows Installer Service.
I tried each FixIt option, says the problem is solved, but isn't.
I tried install Windows Installer 4.5, but it came back as not relevant to my system (because there is no previous installer to update).
Tried a number of recommended patches, but they are all geared toward fixing the problems of Windows Update not a lack of Windows Installer.
MicrosoftFixit50202.msi seems to have corrected Windows Update on my laptop but it won't install on Vista pc because there is no Windows Installer.
I ran the installation disc the option 'fix' with the original, it finished but has not replaced Installer and nothing was fixed.How can I put the installer of Windows on my computer? If there are files on the original drive that can be put into drive C what are they?
Someone suggested to uninstall Service Pack 2, and then reinstall, but if I have no installer of Windows that may not work. Others said they reformatted to correct same question, but it did not work.These previous solutions have not helped:
Could not locate the installer of Windows on Vista Home Premium 32 bit.
Difficulty the installer of windows vista sp2
code641/MSI
Failed installation error msg error 80070641 Windows updateAfter a month of butting heads with the refusal of Microsoft to actually help except to sell us all a new copy of Vista or Win7 at the normal price I solved the problem myself.
- I made a list of all my software purchased, including required registration keys, etc. and site URL for those who I don't have a disk for.
- Deleted registry back up on my external hard disk, reloading apparently one makes the backed up registry problems breed more.
- Inserted my drive from Dell to factory since 2007 and restarted. Press a key to boot from the CD. Chose "reformat hard drive' first, then when prompted hit"Reinstall"(slightly different wording on your computer).
- After you have reinstalled the factory disc 32-bit Vista, I spent hours 7 next installation of SP1, SP2 and hundreds of updates. Note that several times Windows Update said some updates to date has failed, but finally everything installed correctly by repeating the sequence of installation/reboot to update. There have been a few files that reported to turn off computer completely, I've shown... clicked with indicator shutdown (stop), let it do its thing until it turned off the computer and then the computer restarted manually later. After a total of 8 hours and 14 minutes as my Vista has been fully loaded, updated the installer is still intact, everything works very well and did not cost a penny.
It has been 2 days since the reformatting/reinstall. I reinstalled all my additional software without problem. System Mechanic is back in service without any prejudice to my installation Service. Seems that something is involved with .NET Framework 4 triggered a defense mechanism that caused the installer should be deleted, solved the problem of the .NET Framework from Microsoft, but it can be installed by the installer being removed to protect our computers. The question was not just with Dell computers, it is Dell support is just as incompetent that Microsoft support batch so more Dell owners were here to complain.
--------------------------------------------------------------------------------------------------------------------------------------------
FYI: my mobile Samsung with Win7, the correction was easier because my installation Service has not been removed:- Uninstalled all the software using .net Framework 4 (only 2)
- Uninstalled all .net Framework 4 bodies found on my list of programs (Client Profile and Essentials)
- A ran my System Mechanic to remove debris aka too much clutter and correct registry problems
- Laptop rebooted then ran Windows Update. All the updates installed with 3 requiring the judgment to install. .NET framework reinstalled with updates.
- Reinstalled my 2 pieces of software that use .NET Framework.
It has been 4 days without any problem at all. So, in my case, it's .NET Framework 4 that created and continued the problem, even if the specific audit FixIt kept saying all .NET Frameworks have been installed correctly.
-
Original title: How can I restore my services to the default state.
Here is the error message when I try to start it manually to the top of some service programs.
"Windows cannot start the Diagnostic Policy on Local computer service."
"Error 1079: the account specified for the service is different from the specified account.
for other services running in the same process. »
Hi raospent,
1. have you made any hardware changes or software on the computer before this problem?
2. what services you try to start?
You can follow this link & check if it helps.
Hope the helps of information.
Please post back and we do know. -
Original title: I'm trying to start the Windows Firewall.
I'm trying to start Windows Firewall services, (administrative control / tools/services/windowsfirewall Panel) and error 1079: the account specified for this service is different from the account specified for other services running in the same process, rises. What should I do?
Hello
· You will remember to do recent changes on the computer before this problem?
· Logged in as an administrator on the computer?
I suggest you follow the steps mentioned below:
Method 1:
Follow the steps described in the following link and check if the problem persists:
http://support.Microsoft.com/kb/2478117
Method 2:
If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted, system files proceed to the following link:
http://support.Microsoft.com/kb/929833
Method 3:
If the previous step fails, set the center of security and its dependencies services to run under the Local Service account. Follow these steps:
a. Click Start, type services.msc and press to enter.
b. double-click Security Center, click on tab log.
c. Select "this account", click on the Browse button, type Local Service and click ok.
Type the password and confirm the password and click ok.
-
HI -.
All while working on my laptop... my fat fingers hit something and now my cursor will not work. It is frozen. It turns from blue to red. How can I get that back?
Thank you
Hello
Try double-clicking top left corner of the touchpad - it's often the method to toggle the on/off button.
Kind regards
DP - K
-
change color hi - lite from yellow to black to redact?
How to change color hi - lite from yellow to black to redact?
In the properties of the highlights, you can change the color.
Maybe you are looking for
-
How can I access music on iCloud notes?
I recorded a dozen or so ideas of song with notes of music back in May and have just recently found little time to get back at them. I launched the memos app music and none of my ideas are shown under the icon of music library a high Center. After a
-
An error message indicates that subject: chrome is an invalid URL and cannot be loaded.
I tried to enter: chrome to make some changes, but I received an error message stating "the URL is not valid and cannot be loaded. I have not tried to do for several weeks, since I was first Firefox 11. I tried with all my extensions running, and he
-
Equium A60 PSA67E - display driver problem - atidvg error
I just bought this laptop second hand. Need an operating system does all that XP pro sp. running soft bar I get an atidvg error.It changes the screen resolution of 600 by 400 and told that I need to restart. Said then the system has recovered from a
-
Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none. HP trouble shoot said there is nothing wrong and test page prints fine. Then back to
-
Where to find updates of Windows Vista platform
Can someone tell me where to find the update of the platform Windows for Vista on a 32-bit system? I tried the http://support.microsoft.com/ub/971644/en-us link, but it did not help. Updates do not appear in my Windows Update folder. Thank you.