vCenter 5.1 Health Status Changed alarm

Similar Questions

• vCenter Service overall health from "yellow" to "red".

  Hello

  Lately, we sometimes receive from operating e-mail alerts manager as the above title has changed from yellow to red, or red to yellow.

  It's strange because nothing seems to be wrong.

  When you look at the details of the alert there is only a mention that we need to check the vCenter management webservice, but this one is running.

  Any idea?

  It's health, reported by VC itself.
  You can check in VI-client: Home-> vCenter Service status

  also, you will see why it is not 'green', and what needs to be fixed.

  The fault will disappear once the health is in the 'green '.

  See attached snapshot of VI-client

• OMSE - no health status on SNMP

  I recently started an OMSE server configuration and adding OMSA servers in the environment, where I am able to create a beach discovery and set up the beach to learn about SNMP. OMSE is version 2.1.0.2635 and OMSA version 8.2. I followed the tutorial in open manage essentials to set up SNMP on 3 of 18 servers that I added to the beaches of discovery, but so far only one of them reports the status of health. 2 are on the same subnet, but in different geographic locations and a third is in another country and on a different subnet. All sites are connected by the SPLM. If I run the troubleshooting tool, 2 on the same subnet will report more information on the server with the reporting health ukd OMSE, but Dr device which is in reports from different subnet than the name of the device. Can someone help me?

  

  Hi, the DRA is the server you mentioned in your first post.

  I think it's something to do with your installation of OMSA.  I ask you to open a support on 800-945-3355 ticket. This will help our engineer to take a deeper look and possibly to fix your problem.

• Add vCenter Workflow error: unexpected status code: 404

  Hello

  I am trying to add a vCenter vRO 7.0.1 host using the plugin existing VC (ver. 6.0.2.3435085) and I run a strange question.

  If I choose NO for the option ' will you orchestrate this instance "then the workflow completes successfully.  This does allow me to run workflows against the vCenter.

  When I remove the existing vCenter and re - run the workflow of vCenter Add, this time by choosing YES, the workflow fails with error validation process: unexpected status code: 404 (Workflow: Add a vCenter server instance / validate (item2) #1)

  Any ideas why check YES causes this?

  My entries:

  Host: fqdn.servername.com

  Port: 9443

  Path: /sdk

  Ignore the Cert: Yes

  Thank you.

  Hello

  This error probably means that the port number is incorrect.

  Are you sure 9443 is the correct port number? Usually, the port number is 443, not 9443 (port 9443 is where vSphere Web Client is available). Could you re-run the workflow with port 443?

• How can I change alarm

  Hello

  I would try the following, please provide your inputs!

  I am using PowerCLI to change the Type of trigger for alarm 'Datastore Disk use %' warning and alert of 75/85 for a new watermark.

  Is this possible? Any help would be really appreciated. Thank you very much!

  

  With the current construction of PowerCLI, you cannot change triggers yet, but you can use the API.

  Something like that

  $alarmName = "Datastore disk usage"$newYellow = 80$newRed = 85$alarm = Get-AlarmDefinition -Name $alarmName
  
  $spec = New-Object VMware.Vim.AlarmSpec$spec.Enabled = $alarm.ExtensionData.Info.Enabled$spec.Description = $alarm.ExtensionData.Info.Description$spec.Name = $alarm.ExtensionData.Info.Name$spec.Expression = $alarm.ExtensionData.Info.Expression$spec.Expression.Expression[0].Yellow = $newYellow * 100$spec.Expression.Expression[0].Red = $newRed * 100
  
  $alarm.ExtensionData.ReconfigureAlarm($spec)
  

• 5.1 ESXI health status: unknown

  Hello

  I have a HP PL DL380p G8 and ESXI 5.1 with essential kit. Everything was ok, but after months, I got in the health configuration tab: unknown.

  Bit is all ok, server is running, and I don't find any hw problem.

  Why is-status unknown health?

  Thank you.

  Hello

  Restart management agents.

  How? Look here:

  Management for the restart ESXi (ESX 3i) agents

• Form status changed

  Hi all
  
  I use forms 6i and I am facing a problem: when running a query on a data block cahnges status of the form to "CHANGED", my code as follows:
  
  GO_BLOCK ('Update_Procedures');
  SET_BLOCK_PROPERTY ('Update_Procedures', Default_Where, 'VisID =' |) '''' || : uVisitID | '''' );
  EXECUTE_QUERY;
  
  When I comment on (-EXECUTE_QUERY ;)) EXECUTE_QUERY statement and then execute triggr, State of the form "REQUEST". This means that the problem lies in the declaration of EXECUTE_QUERY.
  
  I don't have this block changes before you run the query.
  I did a lot of similar applications on other blocks of data in the same leave with not such a problem... I tried a lot of stuff, but nothing helped, so I need your help
  
  
  Thanks in advance...
  
  
  
  Kind regards
  
  Damien

  Al-Robert Lellah...

  PLs Note sometimes unnecessary code in this trigger u think it's useless, but it is used in such a way that the action of the original conflicted you trying to

  Force removal if pls where any needless triggers focus on more functional triggers for your forms...

  God Bless u always...

  Kind regards

  Abdetu...

• Send emails as the SR status changes

  Hey all,.
  
  I was wondering if someone can help me with a problem with Siebel. Is there a method in which, for example, if the service request is changed by open to non affected QA then an email is sent to a specific employee and if the status is changed again not affected QA for Siebel Assigned-QA sends an email to another employee? Is it possible to create a new workflow? Action? or a Condition?
  
  Kind regards
  
  Published by: Hamzeh Al-Karmi, Sep 19, 2010 04:55

  You can find an example here: http://siebelguide.com/siebelblogs/2008/10/16/invoke-workflow-using-runtime-event-in-siebel/

  The other option is to work with the political workflow and Actions.

• App Store - Apps not updated or their status changes do not

  I have an iPad2 and icon from App store says I have 7 updates.  I'm going to the updates, but the title waiting for updates each app has just OPENED, no UPDATE.  I think that I've updated these applications before, but the situation does not seem to go away.  How can I fix this annoying problem.

  First close all applications on the iPad. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close. Close all applications in this way.

  Then, the strength to restart the device. No data is affected when you do this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  See if the app update notifications have changed.

• Flex - the difficulty to detect status change since the 2.0 update

  Hello everyone. I've been detecting orientation changes in my application without problem throughout until the 2.0 update, now, the events are not firing. Any ideas why the changr in orientation is not detected? I am less concerned by resizing.

  this.addEventListener(SoftKeyboardEvent.SOFT_KEYBOARD_ACTIVATING, resize);             this.stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGE, change);
  
  ...
  public function resize(e:SoftKeyboardEvent):void{
                  trace("activating"); // does not trace
                  if(currentState == "landscape"){
                      mainTextField.setActualSize(1024, 350);
                      tagwrapper.visible=true;
                  }
                  if(currentState == "portrait"){
                      mainTextField.needsSoftKeyboard = false;
                      accordV.visible=false;
                      tagwrapper.visible=false;
                  }
              }
  
  protected function change(event:StageOrientationEvent):void {
                  if(navigator.stage.orientation == "portrait"){
                      trace("portrait"); // does not get traced
                      mainTextField.needsSoftKeyboard = false;
                      IMFConnection.imfConnection.hideInput();
                      mainTextField.setActualSize(mainTextField.width, 1024);
                      tagwrapper.visible=false; //remains visible
                      accordV.visible=false; //remains visible
                  }else{
                      IMFConnection.imfConnection.showInput();
                  }
              }
  

  I also had a feature that has been resizing components on SofftKeyboard.Activate so I think that blocking the call to the StageOrientationEvent. In any case I did take all the stuff I need to do too much in the StageOrientationEvent and he settled in the SoftKeyboardEvent function.

  public function resize(e:SoftKeyboardEvent):void{
                  trace("activating");
                  if(currentState == "landscape"){
                      mainTextField.setActualSize(1024, 350);
                      accordV.visible=true;
                      tagwrapper.visible=true;
                      togglewrapper.visible=true;
                  }
                  if(currentState == "portrait"){
                      IMFConnection.imfConnection.hideInput();
                      mainTextField.needsSoftKeyboard = false;
                      accordV.visible=false;
                      tagwrapper.visible=false;
                      togglewrapper.visible=false;
                  }
              }
  

• SoftKeyboard resize on status change

  Hello everyone. I did my TextArea resize on SoftKeyboardActivate like this:

  public function resizeTextField(e:SoftKeyboardEvent):void{
                  mainTextField.setActualSize(mainTextField.width, 215);
  }
  

  My application has 2 States, a landscape and a portrait status. The code above resizes the TextArea is just above the keyboard in landscape however it is in portrait mode is by far of course. I wanted to add an if statement to check the State in which it is active and then resize accordingly but could not know how to do this. Would contribute to a kick in the right direction. Thank you.

  Also when the text box is resized and position the cursor before some text and amirouche pressing enter the text go off the screen. How can I solve this problem of scrolling?

  Hi rmasroor. Thanks for your reply. Since I posted that I got it to work, and here's how for someone who is interested. In my viewActivateHandler, I added my listeners:

  this.addEventListener (SoftKeyboardEvent.SOFT_KEYBOARD_ACTIVATE, resize); this.addEventListener (SoftKeyboardEvent.SOFT_KEYBOARD_DEACTIVATE, resize2);

  then my resize functions are

  public function resize(e:SoftKeyboardEvent):void{
                  if(currentState == "landscape"){
                  mainTextField.setActualSize(mainTextField.width, 215);
                  }else{
                  mainTextField.setActualSize(mainTextField.width, 450);
                  scroller.y = 460;
                  }
              }
  
              public function resize2(e:SoftKeyboardEvent):void{
                  if(currentState == "landscape"){
  
                  }else{
                      mainTextField.setActualSize(mainTextField.width, 779);
                      scroller.y = 769;
                  }
              }
  

• vCenter host name does not change after upgrade to different to host

  Hello

  Yesterday I've updated vcenter server 5.0 to 5.1 in my lab environment. everything goes well, I faced some problems after the upgrade to 5.1. Below the questions I met

  1 vcenter service is stopped - solved by stopping Server vcenter 5.0, because my SQL Server must always connect to my server vcenter 5.0. Basic Upgrade to 5.1

  The host name of vcenter 5.0 is vcp.lab.com

  2 vcenter 5.1 host name is vcp5.lab.com, when I connect to vcenter server with the host name or IP address still shows the old vcp.lab.com at the top of the console to vcenter

  How to solve this kind of issue. Is there any problem with certification because I copied the secure channel to the server vcp5 Server certification.

  Go to the menu Administration-> vCenter Server settings-> the run settings and type the name of the new server vCenter on vCenter Server Name.

• Health status power warning...

  all, morning

  I want to ask on vSphere client I use VMware EXSI version4.0, why healt condition WARNING This is normal or not? the image can see the attachment.

  in vSphere that I am installing linux red hat 4.7 and earlier still not up-to-date. This is the cause? before that I change my ups, the warning does not appear, but after that I change ups that is the warning appears.

  Thank you

  guys...

  my linux host now time has tq up-to-date for you ' r reply and help me...

  I put in sysstat and create calendar for copy time hwclock and made

• Cascade a status changed by a child block

  I have a rather tricky to implement, requirement and I'm having problems with it and I hope that someone can have a bright idea, I didn't think of that.
  
  We inspect homes to specified plans. These plans can be a standard diet or a special needs. All new properties start with a standard plan. Each if standard or special regime consists of several steps.
  
  The form is a master / detail with the regime as the master and the stages within the regime as the child table.
  
  What I want to do, is if the documents of the child (the stadiums) are changed (can be updated to an existing Stadium, capture of the steps or additions of new) to force the creation of a new special regime as a copy of the standard, including the same steps except if they have been modified.
  
  master and detail are based on views and archive on-update trigger allows do me an insertion rather than update when this is necessary, but the problem is that only added to the new regime actually modified child records.
  
  For example
  A standard plan consists of steps 1, 2 and 3.
  The user makes a change to step 1.
  When validate point on the flags of the stage 1 master record as one of the special standard
  sur-mise up-to-date on the master sees the update and insert a special regime
  sur-mise up-to-date on stage 1 sees the change to the master and inserted as a child of the new master
  steps 2 and 3 are however unchanged and therefore do not trigger the sur-mise updated and therefore are not added to the special regime.
  
  Things has tried so far
  implement the master go_block the child, last_record and loop through the definition of the modified indicator - ins with restricted problem built this and too bulky
  force a State changed on chaild records in the post request and untangle if a real change in the sur-mise to day - work, but if you leave without changed data, you get the message "do you want to save your changes" which is difficult to remove
  
  Is there a better way to change cascading to the master of all the child records?

  The problem is that the detail in the form records will not be the same as the default original plan

  I got it.

  My thoughts in detail:

  Regime has a logic UK, let say plan ID
  Steps a logic UK, let say system IDS and Stadium. set

  Data at the start

  Master Regime ID 1
  Details Stage No 1
          Stage No 2
          Stage No 3
  

  Now, you delete only stage no 2 and add no step No 4

  1. this task updated master, calla procedure that will totally copy the system including all the steps in the comic book,
  This will create the following data in the db

  Master Regime ID 2
  Details Stage No 1
          Stage No 2
          Stage No 3
  

  Accordingly, in the ONE-DAY plan-id goes from 1 to 2
  2 spot, DML operations on the details produced
  for the first and the third folder, nothing is done, the data is already correct through the 'copy routine' on the masters WE-UPDATE
  3. the task of the DML for no 2nd look

  DELETE STAGES
   WHERE REGIME_ID=:MASTER.REGIME_ID
      AND STAGE_NO=2
  

  Now resemble data in db

  Master Regime ID 2
  Details Stage No 1
          Stage No 3
  

  4. the task of the DML for no step 4

  INSERT INTO STAGES (
    REGIME_ID,
    STAGE_NO
  )  VALUES (
    :MASTER.REGIME_ID
    4
  );
  

  Now resemble data in db

  Master Regime ID 2
  Details Stage No 1
          Stage No 3
          Stage No 4
  

  Do?

• [VCOPS] updated alert Type: health, Sub-Type: flaws, State: criticism, genre: VMwareAdapter Instance.

  "

  Alert has been updated at Fri Dec 06 03:51:40 THIS 2013:

  Info: vCenter Service modified and overall health

  Alert type: health

  The attention of subtype: faults

  Alert: critical

  Resource type: Instance VMwareAdapter

  Resource name: vcdvc013 - production LGF

  Alert ID: 18036

  Server VCOps - XXXXXX

  The alert details

  Anomalies:

  Resources	Metric	Message Info
  vcdvc013 - production LGF		vCenter Service overall health has changed

  "

  What are these messages? Can not really know what it is and where to look for the problem.

  This has something to do with vCOPs being unable to talk to the vCenter Server?

  He is alert type 'fault '.

  Fault alerts are directly provided by vCenter, for example there no intelligent logic here on the side of vcops, it reported just said what vCenter.

  vCenter has its own concept of "Health", which has nothing to do with PAHO vc and is inspired by the self-policing of its own services.
  You can see the current state of health to Vi-Client (an old man), go to home-> Administration-> vCenter Service status

  In addition, there are some services on the side of VC that reflects this value of health toward the outside world, as vcops. If this service is stopped, vcops cannot get the current value and report health VC is replaced by 'unknown '.

  So basically, go and look in your VC

  Alternatively, you can cancel the fault of vcops.