vCloud Director 1.5 device console connection is not displayed

Similar Questions

• vCloud Director 5.5 device - limits

  Hi all

  Is there any vmware document that specifies the boundaries of the vCloud Director 5.5 device? I know it is trial / PoC and should not be used in a Production Env, but I am interested in a CEP more complex and has been reading here: the vCloud Director unit. VMware vSphere Blog - VMware Blogs limitations:

  Now the vCloud Director device it has some limitations.  As it is only intended for vCloud Director assessments, the scale of the deployment is limited to:

  • A cell of vCloud Director
  • Two vCenter servers
  • 10 VDC organization
  • 100 virtual machines
  • Up to 11 GB of information stored in the database shipped

  Being a former link, I'm sure that is more up-to-date and these limitations have increased, but would like to find something about it.

  I know it supports CentOS, but unfortunately in this PoC I do not have a Windows Server (will also use the vCenter device) and any database.

  Thanks in advance for any comments.

  We produce is no longer the device.  One of the limitations would be so you don't have updates for it.  The limits are generally the same as what you posted.

  CentOS support any really, since the device is produced as a black box.  SuSE or CentOS according to what version it is.  The embedded DB have size limits.

  If you do a CEP more complex, I suggest to use the BIN on CentOS Installer and have at least 2 vCloud Director of cells in a load balanced configuration.  Several cells is something you just can't do with the device.

• Unable to integrate with vCloud Director - data collection of computing resources is not

  Hello

  We are trying to integrate vCloud Director vCAC in vain.

  In short.

  vCD

  -VC organization - booking pool

  When you perform data collection in the calculation of the resources, it failed with the error.

  "Workflow"vCloudInventory"failed with the following exception: object reference not set to an instance of an object."

  Stack trace

  "at DynamicOps.VCloudModel.Interface.VCloudManagementServices.GetOrgVdcNetworks (String vdcId) at DynamicOps.VCloudModel.Activities.VCloudGetOrgVdcNetworks.Execute (CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute (ActivityInstance, executor, BookmarkManager bookmarkManager ActivityExecutor instance) to System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody (ActivityExecutor executor, BookmarkManager bookmarkManager, location resultLocation).

  Help, please.

  Thank you very much

  Your OrgVDC have a stray or not network?  There is a known issue that there must be at least a valid network on the OrgVDC you want to manage.  This could break the data collection for other organizations, so if there is a 'test' organization, it would be better to go to the resources page of calculation under the company administrator and delete all these management resources.

  This issue has been registered and should be fixed in the next version.

• USB connected HDD not displayed in my computer

  An old sata HDD I temporarily connected via a usb adapter is registered as a usb storage device and a player in the hardware device manager.  But not entered as a drive in my computer, why?  I don't see how I can format it for use.

  Hello

  1. do you see a red or yellow glow next to this hard drive on Device Manager?

  2. were you able to use the same hard drive without any problem before?

  3. have you made changes on the computer before this problem?

  4. are you able to see the drive in disk management?

  5. are you able to use any other USB device?

  The following article might be useful:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  To start disk management, follow these steps:

  1. connect you as an administrator or as a member of the Administrators group.

  2. click on Start, click run, type compmgmt.msc, and then click OK.

  3. in the console tree, click disk management. The disk management window appears. Your disks and volumes appear in a view chart and the list view. To customize your perception of your disks and volumes in the shutters upper and lower the window, point to top or bottom on the view menu and then click the view that you want to use.

• Wired connection is not displayed in Cisco Connect

  Hello Cisco Home Community Forum,

  All my wireless to my Jack connections are fine and appear in Parental controls in the Cisco Connect software. But my wired connections are not. Each device that connects via an ethernet cable plugged into one of the ports on the router are not included in the Cisco Connect Section of parental controls software. Please tell me how to solve this problem. Or are parent to wireless only controls?

  Thank you for the help

  He won't see the square automatically.list. If the computer is not listed, click Add to select the computer. You can also check the connected devices under the DHCP Client table on the router configuration page.

• Sony VGN-AW41ZF "devices and printers" does not display anything, but they work

  devices and printers doesn't ' display anything, although all devices work.

  The reinstallation of the computer (sony VGN-AW41ZF) and add the devices, they have been posted.

  Later, we don't know why, "devices and printers" display nothing.

  Just added a scanner, no problem, but once again not displayed.

  Now add bluetooth devices does not work. My sony bluetooth mouse, I installed before the problem and it still works

  http://eSupport.Sony.com/

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And make sure that Windows is up-to-date with the latest Service Pack.

  See you soon.

  Mick Murphy - Microsoft partner

• ODBC's MS Access 2010 connections are not displayed

  Hello everyone,

  suite the situation: I have MS Office 2010 SP1 installed natively on the main image that is configured as a linked clones. In addition, I add MS Access 2010 as ThinApp (supplied with ThinApp v.4.7).

  When I try to select the connections ODBC via 'External data'-> 'database ODBC' standard connections such as "dBASE Files", "Excel Files", "database MS Access' are not displayed.

  While strengthening the application on a machine own .NET Framework is already installed like the one proposed by VMware ThinApp'ing MS Office 2010.

  These rows are added to Package.ini before the generation process is initiated to allow communication between installing native and ThinApp:

  VirtualizeExternalOutOfProcessCOM = 0

  ChildProcessEnvironmentExceptions = WINWORD. EXE; EXCEL. EXE; POWERPNT. EXE; MICROSOFT OUTLOOK. EXE; MOC:EXE; NOTES. EXE

  ChildProcessEnvironmentDefault = virtual

  Any help would be appreciated

  Well, they're not supposed to appear on the tab "file data Source. They are present in the tab "Machine Data Source.

  Your MS Access virtual seems to work fine for me. To confirm that you can try to create a new file or machine data source.

  

• Why Windows Media Player suddenly not recognized my portable device even if the device is connected and is displayed in my computer?

  Until a week ago, Windows Media Player and my portable device of Sanza fuse got along beautifully when sudden WMP ceased to recognize the device.  This despite the fact that the Sanza is correctly connected and appears in the personal devices from my computer.  The Sanza even shows on its screen that is connected, but it's like OMP no longer sees it? Any thoughts? This who could I have inadvertently done to cause this painful ' divorce? Thanks for any help.

  Hi Cynthia,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem with Windows Media Player.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. are you able to play other files using Windows Media Player?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter in Windows Media Player and check if that helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  Try to uninstall and reinstall Windows Media player from Windows features and check if it helps.

  Enable or disable Windows features: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Wrt54g Linksys Wireless Router - connected but not display page

  Halo!

  I have a Linksys WRT54G wireless router - I was able to connect to the wireless connection, but there is no display of the page in the browser.

  What seems to be the problem here?

  TIA,

  wilardboi

  Please reset the router and reconfigure:

  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset button for
  another 30 seconds.
  3. plug back in the power and keep the reset button pressed
  for 30 seconds.
  4. release the reset button.

  Open the configuration of router with 192.168.1.1 page... White-username and password: admin

  To configure the wireless router.
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here the wireless network mode must be mixed
  -Provide any name in the name box of the wireless network (SSID), while
  without space between the two cases.
  -11 wireless channel
  - And wireless SSID broadcast should be enabled and then click

  Save
  Parameters.
  Please take note of the name of the wireless network (SSID) because it is the '
  Network identifier.
  For wireless security: -.
  Now click the sub-tab under wireless > wireless security.
  Change the mode of WEP wireless security
  Encryption must be 64-bit.
  Let the empty password, do not type in anything whatsoever.
  And under type WEP Key 1 in all 10 digits please. Click Save
  Parameters.
  Please note the 1 WEP key as it comes to the security key for the
  Wireless network.

• Internet connection is not displayed

  Hello

  I'm having a problem on my Windows 7 PC. I am not able to connect to internet I used to work from the ground up to yesterday.
  By clicking on the network icon in the notification area of the taskbar, I see the following...
  http://i.minus.com/iNfHJ2zzkzLF.jpg
  My is a DSL connection. After re-inserted the internet cable in its port, the "Local Area Connection" gets activated as it should. But I do not have a network connection to connect to the internet I used earlier.
  Go to the map [control network and Internet\Network connections] settings, I am able to see only the "Local Area Connection" [enabled] and nothing else.
  I tried to make a new network, and everything by naming a connection high speed [it was the name of the connection that would allow me to connect to the internet earlier], told me that a connection with this name already exists. So I tried with another name, and the connection was created [what said dialogue]. But still, I wasn't able to see the new connection.
  Interestingly, I can connect to the internet, using the command 'rasdial"on cmd. Once the connection is established [by rasdial], by clicking on the icon 'Network' in the task bar, said "currently connected to a connection broadband 3", but no option to disconnect, or right-click, or whatever it is. "
  Finally, my Windows Setup has two different users. For the other user, everything works fine, as it should.
  Any help will be greatly appreciated
  Thank you
  Rick

  Please create a new user account and check if it works very well.

  I was really very reluctant to create a new user, would damage with cry-cuts on the programs that are installed separately for each user [like Google Chrome] and my own shot-cuts to the office.

  However, in order to see if it works, I made a new account. And then created a new connection. It worked, as it should.
  Then I went on my original account [the one who had the problem], and the problem has been resolved even here.
  Delete the new created account, restarted my computer and checked in 'control network and Internet\Network connections '.
  Everything was as it should be.
  I think it was a problem with the same connection being shared between two users.
  Thus, it is now resolved. Thank you very much.
  Rick

• devices and printers does not display the correct information of device or the icon

  I click on devices and printers and of course my devices and printers all appear, however, the device appears to my computer shows in the information window which is a Tablet instead of a desktop PC, the model number is incorrect and also the icon as well. How can I fix this.

  Same question here.

  Solved with this microsoft hotfix to form
  http://support.Microsoft.com/kb/2403006
  It turns into the right device and realistic icon

• The new Director of 4 Add-on firefox does not display any of my extensions, but they are all still installed and functional.

  When click on Firefox-> Add - ons, the new Add-ons Manager opens in a new tab. It shows the links to the page Get-addons, Extensions, appearance, Plugins and Scripts (for Greasemonkey) user in the menu on the left. All these excellent work except for the tab 'Extensions', which says that I have no extensions. However, in the lower right of the window, icons for extensions, I was using Firefox 3.6 appear as they did in this version of the browser. All my previous extensions are fully functional. Is there a way I can re - access the menu for the configuration/uninstall/disable them? Thank you very much to all those who are ready to help!

  You seem to have been using this profile with some testing of Firefox version according to the presence of many extensions.checkCompatibility. * prefs in your list of system details more.

  You may create a new profile as a test to see if your profile is the source of the problems.

  See:

  • Basic troubleshooting: make a new profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• vCloud Director or vRealize Automation?

  Hello

  I was hoping I could get some advice regarding the choice between vCloud Director and vRealize Automation. We have set up a test environment for vCloud Director however read some articles, it seems that it is a product that reaches the end of life for businesses, but not for service providers.

  So my question is a service provider should us be implementation vCloud Director or vRealize Automation? We do not want to be in a position to migrate off vCloud in a year.

  Any advice would be appreciated.

  Thank you

  Chris

  I can't make any kind of recommendation between the two, because I don't know what you want to do with the products.

  Addressing the availability of the product and the support of it:

  vCloud Director just won't be available to independently purchase and withdrew the license of the Suite from 6.x.  You must purchase the license 5.x to get it (assuming that it is available)... This aspect, if not suite your needs right now until mid-2017 (when vCloud will end support for users of the company).  From 2017, you have to make a decision as to what will replace vCloud or continue to use vCloud Director, even if we will not offer support for it.

  VRealize Automation will meet your needs?  I do not know without knowing your use case and requirements... that is for discussion of a VMware sales representative.

  Apart from all this: VSPP is the VMware service provider program.  A version of vCloud Director will exist for them, but it is precisely for them (members of the VSPP program).  Unless you work for a member of the VSPP program, the statements above concerning vCloud Director are what you think.

  If you are Member VSPP, vCloud Director for the providers of services (5.6.x) is available as the direct vcloud Director 5.5.x successor.  Then by all means we will continue to support these versions, and it can be used to manage resources like a Cloud provider.

  I had a number of people say they are service providers, which is very beautiful.  Be a VSPP means being in a specific program of VMware, which gives access to certain things (which AFAIK is vCloud for Service providers).

  I'm not trying to be harsh or terse here, but I want to just make sure we do differentiation key on what is available to whom and how.

• Where can I find the package libXdmcp vCloud Director 5.1 RPM installation?

  Hi all

  I have installed my first vCloud Director and am not a Linux
  Guy at all. In any case my RedHat 6 operating system does not include the RPM libXdmcp
  package. I downloaded and installed several RPM packages on the web,
  but none of them does not seem to fix the problem. vCloud Director always told me
  the package is not installed. I think that am downloading and incorrect installation
  RPM. Can someone please point me to a URL where I can download the right file?
  I went to many Web pages with hundreds of links to libXdmcp
  downloads, but I don't know which one to choose from. Also if you can tell me the
  good way to install this would be great!

  Thank you in advance for your help!

  He should be the one below, it's him I used all my environments and is the one in the post to blog as well.

  
  

  libXdmcp - 1.1.1 - 3.el6.x86_64.rpm

• NetBeans Device Manager does not display peripheral reg with JAVA ME SDK 8.2

  Hello, looking for advice.

  Execution of netbeans 8.1, with java me SDK 8.2 and Java ME SDK and demo 8.2 tools plugins for netbeans.

  Problem is the device (rpi) is to be registered in the java me SDK 8.2 device manager, but will not display in the netbeans Device Manager. I try to run the java script to the RPI but fails with the error "non-registered device.

  I have attached a few pictures of the screen.

  If more info is needed please let me know.

  Thank you

  Adam

  Thank you, Harry.

  I was able to remedy late last night. I removed ME SDK and netbeans and plugins and reinstalled it, after that if worked like charm. I am now able to run java script for the pi of netbeans.

  Thank you