Wrt54g Linksys Wireless Router - connected but not display page

Similar Questions

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• HP wireless correctly connected but not printing

  Have HP Officejet 6600 wireless configured correctly on MAc with snow leopard. Test page prints ok.

  When printing from any application nothing orints but HP utility SIAS host network is busy, will try again in 10 sec Network is certainly not busy. Any ideas anyone how to solve?

  It could be the router, but it seems that it might just be a port on the router that is blocking the printer from printing.

  You can try to perform a hard reset on the router. Unplug it for 30 seconds and plug it in again. You can also disable your firewall and anti-virus when restarting the wireless connection.

• Linksys wireless router is not my new Motorola modem Internet access

  I am relatively new to setting up home networks, so it's maybe a stupid question but I'm stuck! I bought a new modem Motorola (SurfBoard 1621) as my old Motorola modem was not favorable to the increase of the speed offered by Comcast. The modem I bought was a model recommended by their web site. They recorded the new modem last night and I can access the Internet when the PC is connected directly to the modem, but not when the laptop is connected to my Linksys wireless router. (Sorry, I don't know the model because it is at home and I'm at work!) Is there something I should do for the router to recognize the new modem? The router recognizes the wireless laptop, but it can not connect to the Internet.

  Thanks a lot in advance for your help.

  Success! Thanks a lot for your answer. My router is a WRT - 54G links.

  The instructions were very informative, although I have a suggestion. Just restart the modem and the router did not work. I had to reboot other equipment in my system (a NetGear firewall and a level switch 5 ports) and the router and the modem. I would like to see the reboot of reference tracking "and other devices. I guessed the appropriate power of sequence (modem, firewall, switch, router, computer), and fortunately, it worked.

  Again, thank you for your quick response.

• My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

  My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

  original title: status: network address acquisition
  Hi BKlap,
   
  Try these methods in the order.
   
  Method 1: Repair the network connection to solve the problem.
  For more information, see:
  To force a network adapter to acquire an IP address
   
  Note: The information in the article applies to Windows XP Home Edition as well.
   
  Method 2: Follow the steps listed in this article to resolve the problem:
  How to troubleshoot connectivity TCP/IP with Windows XP

• Cannot renew the IP (WPC54G card/Linksys Wireless Router)

  I think that the Wireless 'hardware' (is that correct?) in my laptop came out because I could use my Linksys wireless router until I installed a Wireless Linksys WPC54G card if I used an ethernet cable to connect with.  If the card is installed and I am connected to my network, I have an excellent signal but no Internet connectivity. I did the command "ipconfig" and renewed my IP address, but it appears as 169.xxx.x.x. I can't renew the IP address of 192.xxx.x.x.

  Does anyone know how to fix, or what is the problem?  I'm set up to ensure that the configuration of IP address automatically, so it has nothing to do with it.  Thank you.

  First check the settings on your Linksys router wireless... Follow this link (this must be done on a computer/laptop wired)...

  Once you know the SSID and the network/WEP/WPA key, then uninstall the adapter linksys and re - install...

  Uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next.

  NOTE: The hardware installation screen may appear indicating that the adapter has failed the Windows Logo test. Ignore the window and click on continue to continue the installation because the adapter has been tested and it works with Windows XP. When Windows has finished installing the driver, click on Finish.Goto Control Panel and double-click on network connections... Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• E4200 Mac connects but not PC after crash

  We had a power failure.  Connection Wi - Fi disturbed and has not corrected itself as in the past.

  A MAC and android os phone will connect but not PC with different operating systems.

  Wired computers will connect and go on the internet but not when try wireless on windows PC.

  I have a comcast modem and a router wireless e4200.

  Tried the re-engining of the modem and the router.

  Tried to unplug Cisco on computers and then reconnect to wireless connection.

  Sometimes laptops will discover the excellent show and Cisco of the signal power but does not connect.

  Wireless is enabled on laptop computers.

  Do not know what has changed this causes for the victory of the PC only.  (IP? etc?)

  Any help is appreciated.

  Thank you.

  Thank you for the answers.

  I did a factory reset within the connection on the router.

  After resetting my settings it works fine.

  No idea what scattered settings.

• Receive the message error "wireless network connection is not a valid ip configuration.

  Original title: unable to connect to wifi on windows 7 on Dell laptop

  Help!  I went on vacation and used my laptop to DVD play only.  I am now back home and cannot connect to the Internet.  I tried all sorts of resolutions without result.  When I use the Troubleshoot utility, it tells me to stop my router and turn it back on.  I've done this multilpe times at this point.  Once I keep in the resolution of the problems, I get the same message again and again: "wireless network connection is not a valid ip configuration.  I disabled McAfee and morning services.  I used the command prompt to reset WINSOCK, IPv4 and 6.  I turned power on and off wireless by using the key on the keyboard.  I disabled and enabled the network connection.  I have the driver-upated.  I know the router works properly from my iphone and iPad is all connected without problem.  I removed and added to the wireless network.  In the network and sharing Center (I would copy and paste the view up here, if I could, but since I can't get online...), it is said "unidentified network, no internet access" on the right side, and he also says that I'm connected to a public network.  There is no link to click for the public network and I can't seem to find a way to change it to the House (there are no options, no links).  I tried to solve this problem, after I get home from work every night and I'm so frustrated that nothing works.  Please, please help!

  Kristine,

  Please try these steps before replacing the adapters and let us know the results.

  1. To open a command prompt, click Start , and then type CMD in the programs and files.
  2. Right click on CMD.exe in the programs icon and select run as administrator.
  3. When the user account control pop up box, click Yes.
  4. At the command prompt, copy and paste (or type) the following command and then press ENTER:
     netsh int ip reset c:\resetlog.txt

     Note If you do not specify a path of the directory for the log file, use the following command:

     netsh int ip reset resetlog.txt
  5. Restart the computer.

  If the problem persists, go through the given suggestion't-have-valid-ip/62ca59b1-c173-4465-9153-554a13928315 http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/wireless-network-connection-doesn

  Hope that these measures could help you.

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• connected but not connected

  Hello
  on 11g on HP UNIX.
  
  Can not understand: connected but not connected:

  sqlplus sys@+ASM as sysdba
  
  Enter password:
  ERROR:
  ORA-12154: TNS : 
  Enter user-name: sys as sysdba
  Enter password:
  Connected.
  SQL> select * from v$instance;
  select * from v$instance
  *
  ERROR at line 1:
  ORA-01012: not logged on

  Any idea?
  Thank you.

  sqlplus sys@+ASM as sysdba
  ORA-12154: TNS:
  Enter the user name: sys as sysdba

  SQL > select * from v$ instance;
  Select * from v$ instance
  *
  ERROR on line 1:
  ORA-01012: not connected

  You connect to the instance by TNS connect descriptot ASM?
  Which alert log file shows?

  tnsping + ASM

• I keep get redirected to google everytime I open facebook. who's who of the charges and allows me to connect, but once the page loads I get redirected to my homepage... can help all

  I keep get redirected to google everytime I open facebook. who's who of the charges and allows me to connect, but once the page loads I get redirected to my homepage... can help all

  Hi TonyHutton,

  1. what browser you use on the computer?

  2. did you of recent changes on the computer?

  3. only happens with the facebook site?

  4. do you have security software installed on the computer?

  Check if the problem persists on all other sites as well.

  See the link below and try them the steps mentioned, check if it helps.

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

• ¿Dear sirs, I can create with 'Photoshop Elements 12', a multi-page PDF file? I can create a file 'pdf', but not several pages. Thank you

  Gentlemen of ¿Dear,

  I can create a multi-page PDF file with 'Photoshop Elements 12'?

  I can create a file 'pdf', but not several pages.

  Thank you

  Valentin Uriarte

  Unfortunately, the last few versions of PES are much less talented to work with multi-page files, and you can do this in PSE 12.

• I converted a PDF file to word.  Can I change the words, but not the page.  I can't change the margins. If I delete a picture of the page, space where the image is unusable.

  I converted a PDF file to word. Can I change the words, but not the page. I can't change the margins. If I delete a picture of the page, space where the image is unusable.  Can someone help me please? Gary

  Thank you, Gary!

  I appreciate your comments! Start with the basics: Getting Started with ExportPDF

  And here's a more complete step by step (that you already know, but I'll give the full game!):

  1. Sign in to your account on https://cloud.acrobat.com/exportpdf.
  2. Click on PDF files select export.
  3. Click on choose the files on my computer.
  4. Select one or more files and click on choose (you can select multiple files by pressing the Shift or Ctrl key when you click on the file).
  5. To convert to the: menu popup, select the output format you want (in this case, Microsoft Word).
  6. Let the language of the local menu Document configured to English (unless the PDF is in a foreign language).
  7. Click Export to Word. (The name of this button will vary depending on what format you selected in step 5)
  8. Once the file is converted, it will appear at the bottom of the window, listed under exported files.
  9. Hover your mouse over the thumbnail image of the file, and then click the icon that appears on the left side of the thumbnail to download the file in your downloads folder. (You can also click on the files tab in the upper part of the window to see a complete list of all converted files).
  10. Once you have downloaded the file, you can open it up in Word for editing.

  I hope this helps! If this isn't the case, you know where to find me!

  Best,

  Sara

• Can I extend the horizontal slide show in a straight line but not full page from top to bottom?

  Can I extend the horizontal slideshow in a straight line on the page from start to finish, but not full page up and down?

  Hello

  Please check these videos to help:

  https://www.YouTube.com/watch?v=BDgERSf2a5k

  https://www.YouTube.com/watch?v=diUtfwFGI1w

  Thank you

  Sanjit

• Game WGA600N adapter used to connect to the router WRT310N but not now.

  I have a game WGA600N adapter that connected perfectly to a WRT310N router. Has worked for 2 months. Then one night while being connected via the adapter for games, connection has been lost. I was unable to reconnect since. I have reset the router and adapter of game (full reset) and still not connecting. I thought that it could be the signal, but I put the adapter for games about 3 to 4 feet of the router and it still not connect. In addition, when you browse the installer on the adapter for games I can see my network SSID only one part of the time. In this case the weather in normal or next to the router as location mentioned above. Whenever I go through installation and network appears, I continue through the process, but I get an "unable to connect" alternation and the message "network found" that opens. By clicking 'next' never connects to the network. As stated, it worked fine for 2 months before this problem. I thought it was the router and replaced it with the same type and not luck. I must also stress that I was able to connect to an old WRT54GS router without problem. I also tried to connect wireless to the router WRT310N with another PC and had no luck in the connection... However he also finds and connects to the WRT54GS router without a hitch. I am lost at this point.

  As you have arelady set up your WAG600N with WRT54GS router and it worked perfectly well. Then I think the problem lies on WRT310N router. Maybe your game adapter and computers are not connect to your wireless network. You must change some settings in your wireless router. Follow this steps on your router and I think this will make your adapter games work perfectly well.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...